Database Develop

Connect USB Stick

Would it be possible to connect a USB stick to the Diamond by using this adapter ?

Diamond has no USB Host, so no

It would look ridiculous anyway. The Diamond is so small you can afford to carry that AND an Archos anyway. That is what I will do.

Ingvarr said:
Diamond has no USB Host, so no
Click to expand...
Click to collapse
I guess because the hardware doesn't support it??
I had this feature on my Flame, was cool but I didn't use it much. You could even connect KB/mouse!

Ingvarr said:
Diamond has no USB Host, so no
Click to expand...
Click to collapse
I think so too, but as you can see in service manual, htc connects an memory card reader through an Y-USB cradle to read the service-test sd card.
Doesn't that mean that there must be a way to host a device?
(The second one is an ac-adaptor.)
regards

eurofan said:
Would it be possible to connect a USB stick to the Diamond by using this adapter ?
Click to expand...
Click to collapse
Where did you find this USB Stick ?
I am searching for that to use with the Diamond and try it

Here you are:
Intos-USB-Adapter-Adapter-USB-Buchse
cable version
regards

demacus said:
I think so too, but as you can see in service manual, htc connects an memory card reader through an Y-USB cradle to read the service-test sd card.
Doesn't that mean that there must be a way to host a device?
(The second one is an ac-adaptor.)
regards
Click to expand...
Click to collapse
yeah it looks like it works on the picture.
would be nice to be able to add usbstick to our Diamond, for backup and easy install

where did the pic come from? does the diamond recognize the flash drive?

The picture is from the HTC service manual - it shows how to attach the service test sd card to the device.
I think it should recognize the drive, otherwise they couldn't test the device...

demacus said:
The picture is from the HTC service manual - it shows how to attach the service test sd card to the device.
I think it should recognize the drive, otherwise they couldn't test the device...
Click to expand...
Click to collapse
Where can we download it?

xda-dev wiki... like all the other manuals too.

Ok, I must be mistaken here then. Diamond have USB host, at least hardware support for it (unless they have some crossover MC inside this "Y-cable").
Hovewer it seems that it have only limited support in bootloader to load ROM image from memory stick.
Question is if it have the host driver in the Windows Mobile to actually support USB accesses inside WM?

Even soldered myself an y-wire for testing.
Inside Windows Mobile nothing happens when the stick is plugged in. (used an 8GB USB-Stick)
Diamond research section is not so far in the moment, so I don't know how to test if it will work in bootloader mode.
I think they have some electronics switched between device and disk, for access without driver.
edit: removed stupid thoughts, now simple using cat command...
regards

Hi
Is there any progress on this? Do you think we may have usb host for the Diamond at some point in the future?

So, let's push this thread.
I tried to connect an 8GB USB stick throught my self-soldered wire, I've put Diamond into "USB trigger mode" but without any success.
Now we have to figure out which devices can be connected in USB-mode...
I got a few exams in this week, so I'm gonna try at weekend to connect an simple sd card reader.
regards

demacus said:
So, let's push this thread.
I tried to connect an 8GB USB stick throught my self-soldered wire, I've put Diamond into "USB trigger mode" but without any success.
Now we have to figure out which devices can be connected in USB-mode...
I got a few exams in this week, so I'm gonna try at weekend to connect an simple sd card reader.
regards
Click to expand...
Click to collapse
i think you should try a smaller stick...
as i remember there were problems in "window mobiling" with external drives (SD cards..) larger than 1GB

any luck with , would be tops

any progress?... I am looking forward..

http://forum.xda-developers.com/showthread.php?t=413510

Hero won't mount SDcard on any PC plz Help

Have been trying to connect my Hero to my pc so I can fill up my SDcard with music, but every time I connect it to any pc, the phone just charges. I have the stock 1.5 ROM and still the phone just won't mount SDcard nor would it even pop up the option to mount on the taskbar. I have tried to install ADB drivers and nothing. Phone has been reset to factory defaults and still nothing happens when plugged in to usb, just charges the phone and no messages at all! What Can I do? Thnx in advance.

Have you tried mounting on a different computer? to see if it's either the computer or your phone

Yes I have tried on 6 computers. 4 windows and 2 linux, but same thing happens phone just charges.

CIDRtheBITER said:
Yes I have tried on 6 computers. 4 windows and 2 linux, but same thing happens phone just charges.
Click to expand...
Click to collapse
1. Try different USB cord. Some are made so generic that they only supply power.
2. Check your connectors in the phone. Less likely, but maybe a hunk of pocket lint got in there?

Try downloading USB Switcher from the market, i had the same problem with my phone before and that seemed to fix it.

I have tried with two usb cords, one being the one that came with my ps3 and the other I just happen to come across with

I will try that right now

I just installed USB Switcher and same thing is happening, phone starts charging.

CIDRtheBITER said:
I just installed USB Switcher and same thing is happening, phone starts charging.
Click to expand...
Click to collapse
you have to add the widget to one of your screens then tap the widget icon while it's plugged in. then the icon will turn purple and, hopefully, you will be able to see the drive under my computer.

Widget is on one of my screens, but when I tap it it does nothing just stays gray.

maybe reformat your sd card?

You are absolutely sure the SD card is actually inserted into the slot on the phone?

or maybe even try to insert the sd card to your computer some other way..

If none of those options work, you can try loading up RA (hold HOME while powering on) and mount the SD in recovery > USB-MS Toggle.
Assuming you're rooted and loaded the custom recovery.

No no no.. download htc sync from htc. It should fix your problem.
HERE
All cell phones need drivers on the computer to mount your card. The htc ones come in htc sync.
Some phones, like this one, had the htc sync on the stock memory card... Mine didnt though
And windows can usually find the drivers online by itself. Mine did.
You dont have to sync anything or even set it up.
And of course open up your taskbar drop down list, select charge and change it to "disk drive" mount sd card

installing pdanet also installs the correct drivers

And he gets off when someone with good answer helps. lol

I have installed HTC sync on my computer with no luck. Also I have toggle the ms mode in recovery and still nothing, phone just charges. Im planing on formatting my sd card and starting again but can't find my micro SD adapter lol. Once I find it I will post any updates hopefully that will fix it.

CIDRtheBITER said:
I have installed HTC sync on my computer with no luck. Also I have toggle the ms mode in recovery and still nothing, phone just charges. Im planing on formatting my sd card and starting again but can't find my micro SD adapter lol. Once I find it I will post any updates hopefully that will fix it.
Click to expand...
Click to collapse
Sounds like a corrupted microsd card. You should download the Android dev kit and use ADB and see if theres communication between your phone and the Pc. If not you should look into solving bigger problems than your microsd card.
If there is communication between your phone and computer and you have Adb working, try reformatting that microsd card or replacing it.

I have formatted my sd car with no luck. Still my phone just charges when plugged to the computer. I am pretty sure I have a defective hero, as I have never seen the option to mount the sd on the taskbar. I do have insurance on the phone, but do you guys think the techs at sprint might not want to work on it since it is rooted and has a custom ROM? lol

Cannot Connect to Mass Storage

Hi Guys,
I have just bought the samsung galaxy s, and it connect to the internal mass storage of the device, i have win 7 and it says device driver not found.
I dont have SD card on the device.
Thanks

I think all you have to do is to slide top panel in SGS down and click on USB notification to mount your phone storage.
Sent from my GT-I9000 using XDA App

drigy said:
I think all you have to do is to slide top panel in SGS down and click on USB notification to mount your phone storage.
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
+ 1
Personally didn't figure it out till a week into owning the phone that there was an extra step
involved in activating mass storage mode.
As mentioned, just slide down the top taskbar, click on the usb alert box and mount.

Thanks guys i knew that, i have been using android lately on desire. Well i solved the issue by downloading a driver.

AER0 said:
+ 1
Personally didn't figure it out till a week into owning the phone that there was an extra step
involved in activating mass storage mode.
As mentioned, just slide down the top taskbar, click on the usb alert box and mount.
Click to expand...
Click to collapse
same here haha. had the phone for over a month and still couldnt get in mass-storage.. till i figured out i had to do the "following step "

Sorry to highjack this thread but - do we need to use the "safely remove hardware" on the PC and "remount SD card" on the phone before unplugging the USB cable?

tempura said:
Sorry to highjack this thread but - do we need to use the "safely remove hardware" on the PC and "remount SD card" on the phone before unplugging the USB cable?
Click to expand...
Click to collapse
Supposedly, one should firstly "safely remove hardware" via the usb window on the PC anytime there is
a need to sever a USB connection to a device.
However, in all honesty, I only know a handful of people who ever do this, and I'm not one of them.
Most if not all products with connections via USB won't be affected when it is just manually unplugged (disconnected from usb port)
unless you have data being transferred while you unplug/disconnect the usb device.
But for devices with their own proprietary OSes (PMP, MID, MP3 players, phones, etc.), it is recommended
you follow whatever steps they provide for you in the manual.

AER0 said:
Supposedly, one should firstly "safely remove hardware" via the usb window on the PC anytime there is
a need to sever a USB connection to a device.
However, in all honesty, I only know a handful of people who ever do this, and I'm not one of them.
Most if not all products with connections via USB won't be affected when it is just manually unplugged (disconnected from usb port)
unless you have data being transferred while you unplug/disconnect the usb device.
But for devices with their own proprietary OSes (PMP, MID, MP3 players, phones, etc.), it is recommended
you follow whatever steps they provide for you in the manual.
Click to expand...
Click to collapse
Thanks. I kinda freaked out today when I clicked "safely remove hardware" AND "remount internal SD card" on the SGS. The device later failed to recognize the internal SD card and screen went black. I thought I had bricked it and killed my internal SD. From now on, I might use an external microSD card to transfer movies into my device.

[Q] Galaxy Note to iMac and Storage Question

How do I connect my phone to my computer? I prefer charging via my computer (not sure if recommend) and it would be nice to be able to put music and pictures on via my iMac (running newest version of Lion). I don't have an SD card, so maybe it's just not picking it up cause I don't have one?
But I downloaded the Android app, which says it requires Android 3.0 or higher, but I tried it and it just crashes whenever my phone is plugged in.
I don't understand the way the memory is done on this phone, why does it have "usb memory" and why does it have to load every time I turn the phone on?
Why isn't it all just phone memory? To me thats basically "you have 2GB for phone stuff, the rest is just for music and picture". Can you put apps on there? and phone stuff?

craiigman said:
How do I connect my phone to my computer? I prefer charging via my computer (not sure if recommend) and it would be nice to be able to put music and pictures on via my iMac (running newest version of Lion). I don't have an SD card, so maybe it's just not picking it up cause I don't have one?
But I downloaded the Android app, which says it requires Android 3.0 or higher, but I tried it and it just crashes whenever my phone is plugged in.
I don't understand the way the memory is done on this phone, why does it have "usb memory" and why does it have to load every time I turn the phone on?
Why isn't it all just phone memory? To me thats basically "you have 2GB for phone stuff, the rest is just for music and picture". Can you put apps on there? and phone stuff?
Click to expand...
Click to collapse
To Connect iMac with android, I recommend you androidfiletransfer (you Can find it on the web)
Difficult to explain the storage system of android but "sd card" is for internal storage while the common sd card is indicated as "external_sd"

norge-xda said:
To Connect iMac with android, I recommend you androidfiletransfer (you Can find it on the web)
Difficult to explain the storage system of android but "sd card" is for internal storage while the common sd card is indicated as "external_sd"
Click to expand...
Click to collapse
Like I said in my post. It says it requires 3.0 or higher. Note runs 2.6.3 so can't use it.

craiigman said:
Like I said in my post. It says it requires 3.0 or higher. Note runs 2.6.3 so can't use it.
Click to expand...
Click to collapse
Sounds odd to me, given that I have Note too.
Other way could be to install kies for mac, even though I read somewhere that the last version doesn't recognize Note.
The fact is that I used to have kies for mac on my macbook but I uninstalled it and the note is still recognized as usb storage (when I connect Note to usb, I need to connect the Note by clicking on "connect" on the notification window).
Does usb icon appear on your notification bar?
Other possible problem could be Lion, I use snowleopard so I can't say if the problem is due to the new iOSX.
Bytheway, just to answer your other question: no, it's preferrable to charge Note via domestic plug. The charger is 1A, specifically for Note

norge-xda said:
Sounds odd to me, given that I have Note too.
Other way could be to install kies for mac, even though I read somewhere that the last version doesn't recognize Note.
The fact is that I used to have kies for mac on my macbook but I uninstalled it and the note is still recognized as usb storage (when I connect Note to usb, I need to connect the Note by clicking on "connect" on the notification window).
Does usb icon appear on your notification bar?
Other possible problem could be Lion, I use snowleopard so I can't say if the problem is due to the new iOSX.
Bytheway, just to answer your other question: no, it's preferrable to charge Note via domestic plug. The charger is 1A, specifically for Note
Click to expand...
Click to collapse
There is a USB logo on the notification on my phone. And when I go into setting on my iMac it says connected android, but can't click on it from them. and it doesn't show anywhere else.
On my sisters android whenever I would connect it it would pop up with something on her phone choosing what mode to put the phone in. Not doing that on my one.
edit: I've downloaded Kies.. but isn't picking up my phone.
edit 2: Says it only works with certain phones

Try Airdroid if you're on the same network, it's a pretty awesome app.
Sent from my GT-N7000 using XDA

Why dont you just use the mass storage mode? Plug it in and the internal memory will show up like a usb drive on your desktop.

are you using mtp mode or have you selected usb debugging?

File transfer and USB

I noticed that my phone is no longer recognized as a removable flash drive when connected to USB (like my all old devices). But the problem is that copying files to it takes too much time. How to remove this ****ty "Portable Device" way of recognizing my Z1 !?? I want the old "removable flash drive" way of recognizing, AT LEAST for my SD card. I don't care for the internal memory, but I don't want to see my microSD recognized as a Portable Device and I don't want to wait the whole day for transfering only one folder of music.

xplod2841 said:
I noticed that my phone is no longer recognized as a removable flash drive when connected to USB (like my all old devices). But the problem is that copying files to it takes too much time. How to remove this ****ty "Portable Device" way of recognizing my Z1 !?? I want the old "removable flash drive" way of recognizing, AT LEAST for my SD card. I don't care for the internal memory, but I don't want to see my microSD recognized as a Portable Device and I don't want to wait the whole day for transfering only one folder of music.
Click to expand...
Click to collapse
Anything change if you go to USB Connectivity > Connectivity Mode and select Mass Storege Mode? or Vice-Versa?

eclyptos said:
Anything change if you go to USB Connectivity > Connectivity Mode and select Mass Storege Mode? or Vice-Versa?
Click to expand...
Click to collapse
Thank you. Somebody told me that this can't be changed but after switching to mass storage my SD card now works normally. Unfortunately, now I can't see my internal storage. But I'll switch to MTP when I want to access my internal storage.
Sent from my Sony Xperia Z1

I've got to turn off USB debugging to see phone on laptop
Sent from my C6903 using xda app-developers app