Hi
I recently downloaded 2.12.29 Official MIUI ROM from http://miuiandroid.com/community/threads/2-12-28-29.19143/
However, after flashing, when I reboot the phone, the phone stucks at HTC white screen for a couple of minutes and then reboots into recovery..
The only strange stdout I see during installation is :
>> format system
>> do not formate system
Has anyone come across such issues.. are there any known workarounds..
Help appreciated..
EDIT: I follow the following steps for flashing:
1. Factory reset
2. Wipe cache
3. Wipe dalvik cache
4. format system
5. install ROM
6. wipe cache
7. wipe dalvik cache
8. flash boot.img
>> 6,7 because I read on one of the MIUI forums that if the ROM is flashed on a phone already running an MIUI then these steps are required..
Looks like issue is resolved after following the documentation at: http://miuiandroid.com/community/threads/how-to-update-upgrade-miui.15424/
Related
Mainly caused by not properly following the steps below
1. Boot into CwM or TWRP recovery.
Wipe cache, dalvik cache and data.
2. Flash rom.zip. and Reboot.
Allow tab up to 20 minutes (usually takes much less time) to reboot to the initial Setup screen.
Complete the initial setup (CM Account setup is optional).
3. Go to Settings, and enable Developer Options, allow installation from Unknown Sources,
enable Android Debugging, enable Advanced Reboot, etc. and then Reboot.
4. install GApps.
My experience is that the most important parts are
A. wipe cache, wipe dalvik cache and wipe data, if you are not sure, you can do this every time before flashing any .zip and before booting. It won't hurt to wipe it many times.
B. make sure completed configuring all the setting on step 3, including "allow installation from Unknown Sources", before install GApps.
If you believe any step is not right or not necessary, please let me know.
Asparagus13 said:
Mainly caused by not properly following the steps below
1. Boot into CwM or TWRP recovery.
Wipe cache, dalvik cache and data.
2. Flash rom.zip. and Reboot.
Allow tab up to 20 minutes (usually takes much less time) to reboot to the initial Setup screen.
Complete the initial setup (CM Account setup is optional).
3. Go to Settings, and enable Developer Options, allow installation from Unknown Sources,
enable Android Debugging, enable Advanced Reboot, etc. and then Reboot.
4. install GApps.
My experience is that the most important parts are
A. wipe cache, wipe dalvik cache and wipe data, if you are not sure, you can do this every time before flashing any .zip and before booting. It won't hurt to wipe it many times.
B. make sure completed configuring all the setting on step 3, including "allow installation from Unknown Sources", before install GApps.
If you believe any step is not right or not necessary, please let me know.
Click to expand...
Click to collapse
Since a while i wipe cache and dalvik cache again after installing GApps in step 4 and till now it works perfectly.
PS: i dont wipe data every time in step 1, execpt it is a major Rom update
Please help me with maxicm lollypop update i have 4.12 indian version in my phone rooted i tried installing MaxiCm using CWM but failed several times please help i follow these steps :
Download ROM, Gapps and SU
Put the files on SDCard
Reboot in recovery CWM
Wipe data/factory reset
Wipe cache partition
Advanced->Wipe dalvik cache
Install zip->choose zip from /storage/sdcard1
Choose "MaxiCM-5.1-XXXXXXXX-janice.zip"
Choose yes
Repeat procedure to Gapps and SU
Reboot system now
But didnt work please provide link if something is missing to download . Thank You.
download modded cyanogenmod 11 (for this device) then flash it and boot it..after that flash the maxicm...i tried that n it's working
izwan15 is right, you can find Modded CyanogenMod 11 here: http://forum.xda-developers.com/galaxy-s-advance/general/rom-modded-cyanogenmod-11-t3387424
This series of roms is focused tu gain more performance for this series and add some other features to the rom, all of them are based in latest firrmware for each
How To install:
1) install TWRP for your device
2) enter in advance wipe and wipe dalvik, system,data,internal storage and cache
3) format data partition
4) flash the rom
5) 4) flash DM-verity
6) enjoy!!
A70:
to boot it must format data after install the rom
Download:mediafire
ROM OS Version: 10
ROM Kernel: Stock
ROM Firmware Required: Stock Android 10
Status: Stable
Created 31-08-2020
Last Updated 11-12-2020
In orden to boot the rom you need to flash DM-Verity after install the rom
Telegram Group for support and updates
wrong instruction for a705FN or this for a70MN only
MHMD NZMY said:
wrong instruction for a705FN or this for a70MN only
Click to expand...
Click to collapse
Wdym? All variants doesn't matter lmao
I'm on A705MN running latest TWRP and your instructions are not very clear. Here is what I am doing and get a bootloop
I advanced wipe cache, dalvik, data, system, internal storage
I format data and type "yes".
install add files for zip of rom, then add second zip of DM-verity
Both flash fine; do not reboot, but go to TWRP home and format data again per your instructions, type "yes"
then reboot system...and I get boot loop.
If my order is wrong please clarify.
Any prints?
gaderderian said:
I'm on A705MN running latest TWRP and your instructions are not very clear. Here is what I am doing and get a bootloop
I advanced wipe cache, dalvik, data, system, internal storage
I format data and type "yes".
install add files for zip of rom, then add second zip of DM-verity
Both flash fine; do not reboot, but go to TWRP home and format data again per your instructions, type "yes"
then reboot system...and I get boot loop.
If my order is wrong please clarify.
Click to expand...
Click to collapse
2.1 after format data, you need to reboot recovery
Anyone with A70? I installed Android 10 Stock Rom to install this Tutibreaker rom and the phone never started, the phone was in bootlogo and I repeated the process and instructions and the phone never started so I had to go back to Stock Rom and I got frustrated
This is what I did from stock rom android 9:
1. Boot phone to download mode
2. Fastboot flash recovery twrp-3.5.0_9-0-ali.img
3. Boot into recovery TWRP
4. Wipe > swipe to factory reset
5. Wipe > Format data
6. Wipe > Advanced wipe
7. Wipe: Davik/ART Cache, Cache, Data, Internal Storage, and system.
8. Install PixelExperience_ali-10.0-20201122-2316-UNOFFICIAL.zip
Install failed error 255
I did Try other rom like RevengeOS-3.2-Q-OFFICIAL-ali-20200713-0913.zip but also failed
Please advise!
Turn out these 2 : twrp-v3.2.3-ali.img and twrp-v3.2.3-unofficial-ali_20181110.img won't flash custom rom even after I wipe and format data. The only on that work is mali.img from here:
TWRP 64
So, official ali twrp is 32 bit and most custom roms are 64 bit !?
I'm not a developer, I just found the ROM and wanted to post it here, so I'm not responsible for any damage to your device, do it at your own risk.
Steps I did to install it:
1- Backup.
2- Download the latest stable version of the ROM.
3- Start recovery mode.
4- Delete Cache, Dalvik Cache and System. (In my case it was not necessary to delete the internal storage, or vendor, if you delete something else I do not promise that the installation will work)
5- Now flash the ROM .zip file (Shouldn't take long).
6- Clear Dalvik Cache and reboot the system.
Download ROM: https://download.pixelexperience.org/mi439
you should also format data, lots of issues with working around not wanting to do so
XT19443 said:
I'm not a developer, I just found the ROM and wanted to post it here, so I'm not responsible for any damage to your device, do it at your own risk.
Steps I did to install it:
1- Backup.
2- Download the latest stable version of the ROM.
3- Start recovery mode.
4- Delete Cache, Dalvik Cache and System. (In my case it was not necessary to delete the internal storage, or vendor, if you delete something else I do not promise that the installation will work)
5- Now flash the ROM .zip file (Shouldn't take long).
6- Clear Dalvik Cache and reboot the system.
Download ROM: https://download.pixelexperience.org/mi439
Click to expand...
Click to collapse
Hey any major bug/problem in pixel experience? Which is more stable PE plus a12 or PE a13?