Database Develop

Official MIUI 2.12.29 rebooting into recovery

Hi
I recently downloaded 2.12.29 Official MIUI ROM from http://miuiandroid.com/community/threads/2-12-28-29.19143/
However, after flashing, when I reboot the phone, the phone stucks at HTC white screen for a couple of minutes and then reboots into recovery..
The only strange stdout I see during installation is :
>> format system
>> do not formate system
Has anyone come across such issues.. are there any known workarounds..
Help appreciated..
EDIT: I follow the following steps for flashing:
1. Factory reset
2. Wipe cache
3. Wipe dalvik cache
4. format system
5. install ROM
6. wipe cache
7. wipe dalvik cache
8. flash boot.img
>> 6,7 because I read on one of the MIUI forums that if the ROM is flashed on a phone already running an MIUI then these steps are required..

Looks like issue is resolved after following the documentation at: http://miuiandroid.com/community/threads/how-to-update-upgrade-miui.15424/

[4.4.x – CM11] Baseband problem : read this for my solution

Hi, few days ago I tried to flash CM11 and was disappointed with the no signal / no IMEI / no SIM problem...
I found a solution that worked perfectly for me :
1) Download and install latest recommended CWM recovery 6.0.4.5, easy to find on XDA
2) Download the latest 4.1 (not 4.3 or you will be stuck with KNOX security) firmware (on Sammobile for example).
3) Download latest CM11 nightly (and/or Paranoid GAPPS if you want them...) and copy the archive files on your SD Card then remove the SD Card from your phone.
4) Download latest modem for GT-I9305 (XXUEMK1).
5) Reboot in Download mode and flash CMW Recovery using Odin, Heimdall (tutorials on XDA...).
6) Reboot into CWM Recovery.
7) Wipe EVERY partition including those in "mounts and storage" section.
8) Reboot in Download mode.
9) Extract the downloaded Samsung package and flash the .tar.md5 file using Odin, Heimdall.
10) Reboot again in Download mode.
11) Flash the latest downloaded modem with Odin or Heimdall.
12) Power off your phone and then put back your SD Card with archive files on it.
13) Boot into CWM Recovery and do a Wipe Data/Factory reset and wipe /system partition in "mounts and storage" section then flash your archive files.
14) Reboot normally.
15) Enjoy.
All of these steps may not be necessary, you may just have to flash the latest ClockworkMod Recovery, wipe everything and try again to flash your CM11 ROM. But this is to be sure that the problem does not comes from somewhere else by restoring the phone at its factory state.
I know this is very long, but I think you could have broken some partitions with previous flashes, this guide helps you to repair bad things and you should flash all 4.4.x stuff using the latest ClockworkMod Recovery version.
I hope this will work for you guys, send feedbacks !

All you need for Gionee M4: root, recovery and custom ROMS.

Hi, everyone! I decided to make this post, containing the stuff from the name.
*I AM NOT THE AUTHOR OF ANY CONTENT BELOW. ALL CREDITS GO TO THE DEVELOPERS FROM RUSSIA*
Root and recovery
How to install TWRP 3.0:
1. Open m4twrp.zip
2. Install recovery.img using SP Flash Tool, scatter file inside the archive
3. When leaving TWRP, it will ask you to choose to install root. Agree
4. Profit
Custom ROMs
BACKUP YOUR STOCK MODEM BEFORE FLASHING!!!
GApps: http://opengapps.org/ (ARM64, 5.1 or 5.0, Pico)
AOSP 5.0
Download: https://yadi.sk/d/GmxF8cBTrtu74
Installation:
1. Put the zip to your SD card
2. Wipe Dalvik/ART Cache, System, Cache, Data with TWRP
3. Install the zip
4. After booting go to SuperSU and disable "Mount namespace separation"
5. Profit
First boot about 3-4 minutes
Author: iwewni
AOSP 5.1
Download: https://yadi.sk/d/2WorFxgFrvPKi
Installation:
1. Put the zip to your SD card
2. Wipe Dalvik/ART Cache, System, Cache, Data with TWRP
3. Install the zip
4. Not leaving TWRP, install Fix_compass.zip and patch51.zip
5. After booting go to SuperSU and disable "Mount namespace separation"
6. Profit
First boot about 3-4 minutes
Author: iwewni
CyanogenMod 12.1 (Android 5.1.1)
Download: https://yadi.sk/d/3UtQPP8aspLaE
Installation:
1. Put the zips to your SD card
2. Wipe Dalvik/ART Cache, System, Cache, Data with TWRP
3. Install the zip
4. Profit
First boot about 3-4 minutes
Author: iwewni
Flyme OS BETA (Android 5.1)
NOT WORKING: TORCH, RECENTS KEY, MANUAL FOCUS, PROXIMITY SENSOR
Download: https://cloud.mail.ru/public/42EC/dgtRh2EFM
Download patched core: https://yadi.sk/d/YVB08GsbsfrcN
Installation:
1. Put the patched core zip to your SD card
2. Wipe Dalvik/ART Cache, System, Cache, Data with TWRP
3. Install the zip with Flashtool
4. Not booting, go to TWRP and install patched core
5. Profit
Author: ruslan_3_
Patched core author: Artttech
M4 Stock Deodex (Android 5.0)
Download: https://yadi.sk/d/GmxF8cBTrtu74
Installation:
1. Put the zip to your SD card
2. Wipe Dalvik/ART Cache, System, Cache, Data with TWRP
3. Install the zip
4. Profit
Author: Artttech
BLU Studio Energy 2 Stock (Android 5.0)
Download: https://yadi.sk/d/swWgAQ9tsKvb7
Installation:
1. Put the zip to your SD card
2. Wipe Dalvik/ART Cache, System, Cache, Data with TWRP
3. Install the zip
4. Profit
Author: acstudio
I spent two hours making this post...

Camera quality????

josepgreg said:
Camera quality????
Click to expand...
Click to collapse
Aosp 5.1 and flyme don't have autofocus, everything else is same as stock

Thank you bro any chance to get masmellow
---------- Post added at 08:15 PM ---------- Previous post was at 08:10 PM ----------
4. Not leaving TWRP, install Fix_compass.zip and patch51.zip
Where is link

cm 12.1 sim card not detected
i install cm 12.1 sim card not detected plzz tell me how to fix this problem ??

rohitsahota said:
i install cm 12.1 sim card not detected plzz tell me how to fix this problem ??
Click to expand...
Click to collapse
the OP says with a huge font: backup your stock modem. now restore it.

Gershik said:
the OP says with a huge font: backup your stock modem. now restore it.
Click to expand...
Click to collapse
How does one backup their stock modem?
Thank you.

how to backup the modem files? pls help....
how to backup the modem files? pls help....

Gionee m4
Which one is best?

Thanks Gershik
Thanks Gershik i have rooted my this but I'm facing problem in flashing xposed framework..its show error executing updater binary in zip in TWRP.. do u have any idea what to do?

Link flyme os beta gionee m4 die

Boot loop after installing CM 13 + TWRP on SM-G900K

Hey,
All my steps:
1. Root device: LINK
2. Install TWRP: LINK
3. Install new CyanogenMod by this LINK
After installing CyanogenMod 13 and boot.img my device just in boot loop.
I've tried install 12 CM, but no luck.
So ... what I need to do ?!
Thank you for your HELP !

Okay, to install the cm there athe this steps:
1 - Open TWRP (I don't know what you used, but i assume you used this one https://dl.twrp.me/klte/twrp-3.0.0-0-klte-klte.img.tar.html )
2 - Wipe Dalvik / ART Cache, Cache, Data and System (do not wipe Micro SDCard or Internal Storage, you need your zips)
2.5 - Wipe System is the only one you probably doens't HAVE to do, but i recommend to do. The other 3 are 101% necessary, because old apps or app caches WILL bootloop you.
IF YOU WIPED SYSTEM, DO NOT REBOOT
3 - Install the Rom Zip file (Extracted from the post https://download.cyanogenmod.org/get/klte-latest.zip )
4 - Install Open Gapps or (anything) Gapps for 6.0 (Again, extracted form the post http://opengapps.org/?api=6.0&variant=nano )
4.5 - As you know, the korean rom is kind different, it requires te boot.img for some reason, well, flash it. (This one, of course http://forum.xda-developers.com/attachment.php?attachmentid=3823989&stc=1&d=1469502182 )
5 - Reboot and enjoy
If you did anything different or in any different order, i suggest you try again, and just a detail, this is the S5 Mini section, not the S5, DO NOT USE files you found here, they WILL bootloop your device

Qrom For A70MN (DEPRECATED )

This series of roms is focused tu gain more performance for this series and add some other features to the rom, all of them are based in latest firrmware for each
How To install:
1) install TWRP for your device
2) enter in advance wipe and wipe dalvik, system,data,internal storage and cache
3) format data partition
4) flash the rom
5) 4) flash DM-verity
6) enjoy!!
A70:
to boot it must format data after install the rom
Download:mediafire
ROM OS Version: 10
ROM Kernel: Stock
ROM Firmware Required: Stock Android 10
Status: Stable
Created 31-08-2020
Last Updated 11-12-2020
In orden to boot the rom you need to flash DM-Verity after install the rom
Telegram Group for support and updates

wrong instruction for a705FN or this for a70MN only

MHMD NZMY said:
wrong instruction for a705FN or this for a70MN only
Click to expand...
Click to collapse
Wdym? All variants doesn't matter lmao

I'm on A705MN running latest TWRP and your instructions are not very clear. Here is what I am doing and get a bootloop
I advanced wipe cache, dalvik, data, system, internal storage
I format data and type "yes".
install add files for zip of rom, then add second zip of DM-verity
Both flash fine; do not reboot, but go to TWRP home and format data again per your instructions, type "yes"
then reboot system...and I get boot loop.
If my order is wrong please clarify.

Any prints?

gaderderian said:
I'm on A705MN running latest TWRP and your instructions are not very clear. Here is what I am doing and get a bootloop
I advanced wipe cache, dalvik, data, system, internal storage
I format data and type "yes".
install add files for zip of rom, then add second zip of DM-verity
Both flash fine; do not reboot, but go to TWRP home and format data again per your instructions, type "yes"
then reboot system...and I get boot loop.
If my order is wrong please clarify.
Click to expand...
Click to collapse
2.1 after format data, you need to reboot recovery

Anyone with A70? I installed Android 10 Stock Rom to install this Tutibreaker rom and the phone never started, the phone was in bootlogo and I repeated the process and instructions and the phone never started so I had to go back to Stock Rom and I got frustrated