Database Develop

[Q] abnormal error, can anyone help me?

Hi,
I as of yet, am not going close to any ICS build till the issue gets solved by someone.
so I am experimenting with different gb roms. i was using checkrom v6 but didnt like it, so followed steps to install darkyrom/alliancerom extreme edition. i followed the steps as I was told to install allianceota and flash the rom through there. it didnt work. so instead using cmw i flashed through recovery, it did flash but there no root.
so now, i reflashed a stock la6 rooted rom from here; http://forum.xda-developers.com/showthread.php?t=1535025
this went smoothly with no problems, so i installed allianceota as normal, this time when i try to flash the following messages come up:
Installing Multi-CSC
Can't access to '/system/CSC/KOR/system/'
Successfully applied multi CSC"
and then it gives me the option to reboot, wipe cache and a few other options, not full recovery mode.
shall i just reflash the rom through recovery, or am I doing something wrong? and does the slight error above mean I have a problem with my note?
cheers in advance.

Let me just say that almost every ICS ROM out there now has disabled the MMC_CAP_ERASE code in the kernel that activates the eMMc bug and bricks your phone. If you want stock ICS, you can use SpeedMod or Franco kernels. If you want AOKP, there is that now. If you want CM9, there's a bunch of variations plus the official CM9 nightly. If you read through the OP and stickies, you will be okay.
Are you on stock recovery still? It sounds like it from the error you are getting. Try flashing CWM recovery and installing the GB rom with that. Follow Drketan's thread in Android Development.

hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.

salespalace said:
hmmm, so would you advise me to use ics? is it much better? i dont want to use cm9 builds as i need the spen apps and so on. i have looked into kingdroid or alba.
I'll have to think hard about this. i may give it a shot soon though..
oh and btw, I fixed the problem, yep it was to do with cwm it wasn't installed with the stock rooted rom. as for allianceota, it still didnt flash the rom, i had to flash the rom through cwm manually.
cheers anyhow.
Click to expand...
Click to collapse
I love ICS a lot more than GB. If you want to use stock ICS, I would just use Franco or Speedmod kernels with it and be safe. Read both of their forums and decide what you want to do.

I had the same problem with rom deodex i had flash with odin 1.85 firmware gingerbread here ; http://www.hotfile.com/dl/152168378/f76281c/N7000XXLC1_N7000OXXLB3_ATO.zip.html... then i made wipe cache and cache dalvick .

I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.

salespalace said:
I've just flashed AlBa repack latest one on xxlq2, I did it by following the steps,
I thought i had broken my phone, because when the flashing finished and i was rebooting, at the beginning when it welcome to galaxy note n7000 and then goes to the bootup video, it restarted that several times, then after like a few minutes it loaded the homescreen and startup.
Click to expand...
Click to collapse
-Flash a stock GB rom with pc odin
-Root it
-Go to cwm and wipe all (factory reset,cache and dalvik and then Install the ics rom that you like
-Reboot system and now it should work
Sent from my GT-N7000 using Tapatalk 2

Unable to Boot Note n7000 after Firmware Flashing

Hello XDA,
I Need some help with My galaxy note n7000, its was purchased from Kogan, and was in German when I first got it,
I have not been able to find anything on this Forum yet so;
I Had ICS 4.0.4 installed, Stock, and wanted to try CM9
so after rooting and installing CWM I backed up my device, and flashed the "Safe" CM9 kernal with Odin,
My device now hangs on the Boot up screen, and All I can do is the Download files from Odin, I have tried flashing many different kernels and re installing the Stock Rom (it says leaving CS?), without any Luck,
I am wondering if I need a different Rom, and am currently trying to download the Gingerbread roms in an attempt to roll back,
Any help would be appreciated guys and gals.
Nexus

Nexusomega486 said:
Hello XDA,
I Need some help with My galaxy note n7000, its was purchased from Kogan, and was in German when I first got it,
I have not been able to find anything on this Forum yet so;
I Had ICS 4.0.4 installed, Stock, and wanted to try CM9
so after rooting and installing CWM I backed up my device, and flashed the "Safe" CM9 kernal with Odin,
My device now hangs on the Boot up screen, and All I can do is the Download files from Odin, I have tried flashing many different kernels and re installing the Stock Rom (it says leaving CS?), without any Luck,
I am wondering if I need a different Rom, and am currently trying to download the Gingerbread roms in an attempt to roll back,
Any help would be appreciated guys and gals.
Nexus
Click to expand...
Click to collapse
did u wipe in cmw when u were in ics??
if yes... sorry to inform u that u may have bricked ur device
try this link to revive ur device http://forum.xda-developers.com/showthread.php?t=1667886...
if this also fails u ll have to go to samsung service center to get it repaired...

after flashing CM9 kernel your device will not boot up, its natural , a TW rom will not boot with CM9 kernel
you should have entered recovery with three button treatment and done your wipes and flashed CM9 and gapps.
i dont know at what point you are right now,
try flashing a rootable GB rom with pc odin in download mode, then root it ...then get into recovery and flash CM9 etc etc
if you are bricked your flash will stop at factory fs in pc odin..... (fingers crossed)

A cm9 kernel for TW, of all the poor luck!
Sent from my GT-N7000 using xda app-developers app

Install cm9 rom thru cwm and wipe cache / dalvik. Try rebooting now.. Good luk.
Sent from my GT-N7000 using xda app-developers app

[Q] - Phone booting only in recovery

Hello,
I was using the Classic ROM v5 and decided to give the v6 a try. I didn't really like it, so I decided to get back to v5, that's when my problems started.
I did everything as usual, wipe data/cache/dalvik and flash rom, the problem is after I flashed the rom my phone it automatically reboots in recovery mod. I tried almost everything, I flashed the rom via Odin, I flashed a new kernel, I tried flashing via CWM (it gets stuck in installation). I don't really know what else to do
Some1?

Try flashing a stock Samsung Gingerbread rom like the N7000XXLC1. If it boots, do a full wipe in recovery. Then you have a clean slate to work with.

ginopunsalan said:
Try flashing a stock Samsung Gingerbread rom like the N7000XXLC1. If it boots, do a full wipe in recovery. Then you have a clean slate to work with.
Click to expand...
Click to collapse
Ok, I feel like a retarded now LOL I tried flashing a stock ICS rom and it didn't work, didn't even think about the GB one. Thanks.

Unless you have a safe custom ICS kernel, you are risking bricking your Note with a full wipe. Without a custom, always wipe from GB. You are still booting into recovery so I you have not bricked the phone.

ginopunsalan said:
Unless you have a safe custom ICS kernel, you are risking bricking your Note with a full wipe. Without a custom, always wipe from GB. You are still booting into recovery so I you have not bricked the phone.
Click to expand...
Click to collapse
Yeah, I got that part covered (few months ago I bricked my phone, had to replace the board. I don't really know what happened, it just kept booting on recovery, but I got that fixed
Thanks.

[Q] Need help flashing

Just got my Galaxy S back from my Mum today (After I bricked it and sent for repair) she got a note2 omg... Decided to flash a custom rom..
Here goes..
First I followed this guide completelyhttp://http://wiki.cyanogenmod.org/wiki/Samsung_Galaxy_S:_Full_Update_Guide. After I flash the CM 10, my recovery was upgraded to v6.0.1.5 after reboot. But I cannot get pass the recovery. I will have the cm boot animation, then back to recovery again. Tried reflashing the rom, doesnt say any errors but still gets stuck at recovery.
Then I went thru the method at the wiki.cyanogenmod again and successfully flashed cwm recovery 2.5 again. Tried flashing the CM10 rom again but this time round, It shows a long error message ending with "status 7"
I am still able to go into download mode.
Was on stock unrooted 2.3.3 DXJV9.
I made the super no.1 noob mistake of not making a backup........... But, why is rooting and flashing of this phone so hard.....
Pls, any help is greatly appreciated.

Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.

It will work
scpion said:
Btw, I have manage to flash the stock image via odin but is still stuck in a boot loop.. after Odin completed and reboot, I am back into the stock recovery with the below error messages.
Click to expand...
Click to collapse
When u see red error message in stock recovery........u just wipe cache and reboot.......it will work.....

i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.

try this
scpion said:
i have wiped everything many times over. but I am still stuck in the bootloop. the red error messages looked serious though.
Click to expand...
Click to collapse
U just use GB jw4(your region) ROM (don't use single file like PDA).........you use files separately like this [PDA,phone,CSC,pit(512 or 513)]...............use Odin 1.85 for flashing files......,when u complete the flashing it automatically reboot to fulfill the flashing...........then also it gives red error means........ clear only wipe cache and don't clear wipe all data...........reboot your system..... I think this will work for u...........:fingers-crossed:

Thanks. Have it solved. Flashed with another rom with seperate files. I was using the the all in one previously. Got it to run CM10 nightly though till now still not too sure how... But, I m real happy now. It works great so far and I couldnt understand why Sammy refuse to roll out official ones even for 4.0..
Still trying to figure out how to root, flash SGS though.. I have done so for many other device but by far,... this phone is the most complicating....

Aj rocker root
By processor only we not getting stock ICS rom but we getting custom ROM by hacking processor.............
For rooting the ROM u want to be in stock GB ROM like 2.3.5 or 2.3.6 and then u want to download this file(http://download.chainfire.eu/132/CF-Root/SGS/CF-Root-XX_OXA_JVU_2.3.6-v4.3-CWM3RFS.zip)............. after download u want to open Odin 1.85 and select PDA then choose the downloaded file...........select start to flash the file.........reboot and enjoy the root bosssss......if u like this press thanks:fingers-crossed:

Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?

Try to see if you can flash another custom Rom, if that works then it could be that your files are corrupted..
Have you stated your problem over at CM forums..
# Sent from my blazing slimbean SGS i9000 using Tapatalk 2 #

scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:

scpion said:
Just to make sure..
What I did was,
Flashed Android 2.3.5 XXJVS Firmware and rooted with CF-Root-XX_OXA_JVS-v4.1-CWM3RFS.zip
Flashed the speedmod kernel via heimdall
Wiped data/cache. Flashed Latest CM10 nightly
( at this point, there was a error "status 0" installation aborted. When I reboot, the CM10 boot animation flashed twice and it brought me straight to CWM 6.0.1.5. Is this normal behaviour?? Then, not too sure what to do, I wipe data/cache and flashed CM10 and gapps again. this time round, installation successful and after reboot it boot into CM10. )
Is the above normal behaviour?
Next time I wish to change rom, from where I now( CM10) just need to wipe Data/cache and flashed the other rom?
Click to expand...
Click to collapse
OK fine first u want to know something boss......... every firmware having different layout........ correct procedure of flashing is u want to go step by step for enjoy the full features of the ROM ....... u r in GB ROM means then next u want to go ICS ROM........If u r in ICS ROM means then next u want to go jellybean rom and this the correct procedure to use new ROM without the problems...........:good:

Most times from GB to JB u have 2 flash custom 2, 3 times. So its normal when flashing custom the first time it takes u to bootanimation and hangs (take out battery and go to recovery with 3 button combo and flash again till it says install is completed) or directly into recovery.
If u wanna flash other jb rom just full wipe and flash new custom. Make sure u make a nandroid backup so u can go back easily

Can't install ROM

Hello!
I tried to flash Nova HD,CM 7.2,CM 10.1 over the official ics from lg,the installation goes well but after i reboot the phone i see no changes,the phone is just the same.
Until now i've flashed lots of custom ROMs without any problems but i came back to the stock ROM,but now i decided to change again my ROM but it just won't work :|
I dont know what happened,the phone is rooted and all are set up but i just cant flash any rom.
I did like 5-6 attempts but the results are the same..
Can anyone help me ?

Just found out that Paranoid Android is working.
But i cant say the same for the others ROMs.

You can't flash CM7 over ICS. Both ROMs use different bootloaders!
Go to the Development forum and use the AIO Toolkit to flash back the old bootloader, then you'll be able to return to CM7.

Thanks!
But what about CM10.1 and Nova HD?

Did you do a full wipe (Factory reset + format /system) while changing from ROM to ROM?

Yes,i did it all the time!