The App SuperSu or Apps with root Access freezes sometimes, not allways, you can start these App´s 5 to 10 times without Problems and next start the app freeze at that point normaly notification for root acces is shown. The only way is to kill the app and start again, mostly the app starts then, sometimes it freezes 2 or 3 times in a row.
I have re-rooted about 5 times or more, i have updated SuperSu and su Binary, i changed to superuser (uninstalled SuperSu before), reflashed the firmware (Euro Open V10h) and wiped it before and after reflashing. Nothing helps...
Even after reflashing and wiping, the first boot after rooting, the app freezes, nothing further installed (i think)...
Does anyone have the same problem or any idea! Thanks in advance...
CvT
Bogeyof said:
The App SuperSu or Apps with root Access freezes sometimes, not allways, you can start these App´s 5 to 10 times without Problems and next start the app freeze at that point normaly notification for root acces is shown. The only way is to kill the app and start again, mostly the app starts then, sometimes it freezes 2 or 3 times in a row.
I have re-rooted about 5 times or more, i have updated SuperSu and su Binary, i changed to superuser (uninstalled SuperSu before), reflashed the firmware (Euro Open V10h) and wiped it before and after reflashing. Nothing helps...
Even after reflashing and wiping, the first boot after rooting, the app freezes, nothing further installed (i think)...
Does anyone have the same problem or any idea! Thanks in advance...
CvT
Click to expand...
Click to collapse
It would be very nice to know where are you from... your phone official latest firmware is V10H?
If it is, downgrade to V10A, factory reset, upgrade using "web upgrade", root (using IS11LG_SystemBackupTest.signed, if possible) and factory reset. Update SuperSU binary, install SuperSU Pro, upgrade SuperSU in GooglePlay.
Should be enought, its the most radical that I know.
Good luck :fingers-crossed:
I´m from Germany. The Firmware is the latest offical V10h (Euro Open / DBT, i´ve done a file compare, it´s the same).
I´ve done some test´s a few days ago, one of them (install of busybox 1.20.2) let the phone stuck on boot. I tried many things, wiped and flashed KDZ new. After that i want to use my CWM (Nandroid) Backup, so I installed the recovery again (but version 1.1 from my PC, not the actual version 1.2) and i cant restore because of issue "cannot mount system" (issue of version 1.1). So i tried again with adb and finally i did a mistake and mount system manually. The restore first format "/system" but cannot mount it afterwards. So the restore killed my system, there was no Firmware on Phone at all.
I found the software upgrade mode and reflashed the actual Firmware V10h.
So I think there cant be anything "old" on the phone because the wipe killed /data and /cache and the failure with recovery killed /system. The reflash installed the brand new V10h and after rooting and install of recovery (this time version 1.2) I have had the problem with SuperSu / Apps with root already again...
I could try the reflash to V10a and then Webupgrade, but I dont think it will help, cause as I wrote, there were no more old things on phone when I installed the official V10h, so it should be the same...
Thanks for your help!
Bogeyof said:
I´m from Germany. The Firmware is the latest offical V10h (Euro Open / DBT, i´ve done a file compare, it´s the same).
I´ve done some test´s a few days ago, one of them (install of busybox 1.20.2) let the phone stuck on boot. I tried many things, wiped and flashed KDZ new. After that i want to use my CWM (Nandroid) Backup, so I installed the recovery again (but version 1.1 from my PC, not the actual version 1.2) and i cant restore because of issue "cannot mount system" (issue of version 1.1). So i tried again with adb and finally i did a mistake and mount system manually. The restore first format "/system" but cannot mount it afterwards. So the restore killed my system, there was no Firmware on Phone at all.
I found the software upgrade mode and reflashed the actual Firmware V10h.
So I think there cant be anything "old" on the phone because the wipe killed /data and /cache and the failure with recovery killed /system. The reflash installed the brand new V10h and after rooting and install of recovery (this time version 1.2) I have had the problem with SuperSu / Apps with root already again...
I could try the reflash to V10a and then Webupgrade, but I dont think it will help, cause as I wrote, there were no more old things on phone when I installed the official V10h, so it should be the same...
Thanks for your help!
Click to expand...
Click to collapse
I still advice you to downgrade, FACTORY RESET, web upgrade to latest (V10H), root and factory reset.
Factory reset will re-install factory settings based on the files that you have (some kind of "rescue system files") if they're messed, version mixed or corrupted somehow, the problem will remain.
Downgrade will install the oldest, basic and fisrt files files known (apart of dev files V09x). Factory reset will delete all newer files.
Upgrade will reinstall the new files overwritting the old ones from V10A.
The system files should be clean and without corrupted or version mixed files after this procedure.
Good luck on that
RuedasLocas said:
I still advice you to downgrade, FACTORY RESET, web upgrade to latest (V10H), root and factory reset.
Factory reset will re-install factory settings based on the files that you have (some kind of "rescue system files") if they're messed, version mixed or corrupted somehow, the problem will remain.
Downgrade will install the oldest, basic and fisrt files files known (apart of dev files V09x). Factory reset will delete all newer files.
Upgrade will reinstall the new files overwritting the old ones from V10A.
The system files should be clean and without corrupted or version mixed files after this procedure.
Good luck on that
Click to expand...
Click to collapse
Ok, I have done all this, a lot of work (save internal SD-Card, save Nandroid Backup, installed V10a, reset, update to 10b, reset, update to 10d, reset, update to 10f, reset, update to 10h, reset, root, reset), and what should I say, same as before!!!
After the steps to V10h I only installed 3 Apps for root access (for testing): Adfree Android, Dateimanager (Filemanager), Recovery 1.2. I started these Apps a few times, also the superSU-App and after 8-10 Tries, superSu was frozen!!! (same as before update)
No more idea, but all the work was quite useless...
As I thought, with factory reset and flashing new firmware, there are no "old" files (where should they be?) cause system, data and sdcard are written new, so the process of upgrading from V10a couldnt bring the effort...
Bogeyof said:
Ok, I have done all this, a lot of work (save internal SD-Card, save Nandroid Backup, installed V10a, reset, update to 10b, reset, update to 10d, reset, update to 10f, reset, update to 10h, reset, root, reset), and what should I say, same as before!!!
After the steps to V10h I only installed 3 Apps for root access (for testing): Adfree Android, Dateimanager (Filemanager), Recovery 1.2. I started these Apps a few times, also the superSU-App and after 8-10 Tries, superSu was frozen!!! (same as before update)
No more idea, but all the work was quite useless...
As I thought, with factory reset and flashing new firmware, there are no "old" files (where should they be?) cause system, data and sdcard are written new, so the process of upgrading from V10a couldnt bring the effort...
Click to expand...
Click to collapse
This sounds like you upgraded with kdz flasher. Don't do that. Use the official LG Software Update tool. It will download a v10h directly and flash it, together with a factory reset and a reset of those "emergency files". Do another factory reset afterwards just to be sure.
muellersmattes said:
This sounds like you upgraded with kdz flasher. Don't do that. Use the official LG Software Update tool. It will download a v10h directly and flash it, together with a factory reset and a reset of those "emergency files". Do another factory reset afterwards just to be sure.
Click to expand...
Click to collapse
In which mode the phone has to be connected to use that tool? In "Software Upgrade Mode or in Recovery mode or normally booted? With USB Debugging on?
Do I have to choose "emercency update"? How could I say, that I want to reflash the same Firmware (actually V10h is installed)? Please give some advice... Thanks in advance...
Bogeyof said:
Ok, I have done all this, a lot of work (save internal SD-Card, save Nandroid Backup, installed V10a, reset, update to 10b, reset, update to 10d, reset, update to 10f, reset, update to 10h, reset, root, reset), and what should I say, same as before!!!
After the steps to V10h I only installed 3 Apps for root access (for testing): Adfree Android, Dateimanager (Filemanager), Recovery 1.2. I started these Apps a few times, also the superSU-App and after 8-10 Tries, superSu was frozen!!! (same as before update)
No more idea, but all the work was quite useless...
As I thought, with factory reset and flashing new firmware, there are no "old" files (where should they be?) cause system, data and sdcard are written new, so the process of upgrading from V10a couldnt bring the effort...
Click to expand...
Click to collapse
What I said was this:
"I still advice you to downgrade, FACTORY RESET, web upgrade to latest (V10H), root and factory reset."
Web upgrade is the same than LG Update Tool... It will install the original official firmware for your phone, once you're German, you'll have the V10H.
I never had problems with supersu since I use it...
---------- Post added at 03:28 PM ---------- Previous post was at 03:20 PM ----------
Bogeyof said:
In which mode the phone has to be connected to use that tool? In "Software Upgrade Mode or in Recovery mode or normally booted? With USB Debugging on?
Do I have to choose "emercency update"? How could I say, that I want to reflash the same Firmware (actually V10h is installed)? Please give some advice... Thanks in advance...
Click to expand...
Click to collapse
If you have V10H, the program (LG Update Tool) will tell you that you already have the latest one...
Or you downgrade or follow the video from minute 00:51:00
OK, I try again. I used KDZ-Updater for reflash to V10a, I think there would be no other way. Then I used the OTA-Updates to get the Version 10b, 10d, 10f and 10h. That´s what I understood as "Webupgrade".
Now I have connected my phone in S/W Upgrade mode and use the LGMobile Update Tool. There is an option "Recovery phone" and now it is Downloading the Firmware (extremly slow, will last 2 hours or more), next should be Update.
Do u think this way its necessary to downgrade to V10a again, before the use of this tool or would it install all necessary?
Bogeyof said:
OK, I try again. I used KDZ-Updater for reflash to V10a, I think there would be no other way. Then I used the OTA-Updates to get the Version 10b, 10d, 10f and 10h. That´s what I understood as "Webupgrade".
Now I have connected my phone in S/W Upgrade mode and use the LGMobile Update Tool. There is an option "Recovery phone" and now it is Downloading the Firmware (extremly slow, will last 2 hours or more), next should be Update.
Do u think this way its necessary to downgrade to V10a again, before the use of this tool or would it install all necessary?
Click to expand...
Click to collapse
"Web Upgrade" refers to the use of LG Update tool. It's because there is a button named "Web Upgrade" in the b2c program which launches the "normal" LG Update tool. I hope it's clear this way. FOTA (=Firmware over-the-air) is NOT Web upgrade.
I don't know if the emergency mode does the same as the web upgrade, but I suppose it does. So wait those three hours. LG servers are extremely slow on that, i had the same experience when upgrading my phone with Web Upgrade. Just leave it on and go away, and when you come back in a few hours it should work again.
Thanks! I think the update is the same. I need the recovery phone option, cause the installed Firmware V10h is the latest and so there is no option Web-Upgrade activ. With this mode, the normal PHONE UPDATE Screen from the update tool comes up and the 4 Steps Analysis, Download, Update and Complete are shown...
The Download is 465,75 MB and seems to be the normal size for V10h.
But I dont think, there will be a great difference after that update for my problem with superSu. I "bricked" my phone a few days ago, I formatted SDCard, system, cache and data, I had to install the firmware via S/W Upgrade mode, the only mode the phone was booting, all other ways was dead, so I think I came from the absolut beginning. After that flash of firmware and first rooting again, the problem still persist (I had this problem from the first day I got the phone). Therefore I dont think, a 3rd or 4th install will change a lot, but I try...
All of you, who think the tool does something special, I am not sure. There is a Download-Directory, u will find KDZ-File V10H_00.kdz, exactly the same (did a file compare) that u can download on our servers for update via KDZ Update. So I think, also the simple write to the phone will be the same procedure. So I dont think its a great difference to use KDZ-Updater or this tool, both flash exactly the same firmware...
Give response of effort later...
Edit (after Test):
Same as ever! Filemanager freezes every 3-4 times started, supersu hangs sometimes, all as before...
This time I flashed V10a via KDZ-updater, reset, used the LGMobileUpdate Tool for upgrade to V10h, reset, root, reset. Installed supersu update, updated binary, upgraded to superSu pro. I installed some Apps with root access and the effect is as ever, sometimes ok sometimes the App or superSu hangs. Must be a problem with my phone, persists since the first day over all Firmware and Updates...
Thanks all for help!
Hi Bogeyof,
I have the same issue with mly phone and supersu.
I am in France, on 10H european version and supersu just freeze sometimes...
I have no idea what to do. Di you solve your issue ?
Regards
loicb said:
Hi Bogeyof,
I have no idea what to do. Di you solve your issue ?
Regards
Click to expand...
Click to collapse
Hi, unfortunately NO! I´ve done all the stuff, reflash about 5 times or more, factory reset and wipe all (dalvik, cache), but the problem occurs already after reflash and reboot blank stock rom. After rooting the "naked" stock rom, the problem already exists. So it has nothing to do with installed apps or something else...
I also tried using superuser instead supersu. I tried to install both supersu and superuser via CWM-Zip (not together, one after the other, and I´m sure that I´ve correctly uninstalled the previous one) to be sure of correct Superuser-Bin and Superuser/SuperSu-Versions, but nothing changes. Even with superuser, same behavior...
May be a good news is, i´ve also tried a costum rom (CustoNexus) and couldnt see the problem with that rom. So may be with the next update to jelly bean our problem is solved too...
Let´s wait and hope...
Bogeyof said:
Hi, unfortunately NO! I´ve done all the stuff, reflash about 5 times or more, factory reset and wipe all (dalvik, cache), but the problem occurs already after reflash and reboot blank stock rom. After rooting the "naked" stock rom, the problem already exists. So it has nothing to do with installed apps or something else...
I also tried using superuser instead supersu. I tried to install both supersu and superuser via CWM-Zip (not together, one after the other, and I´m sure that I´ve correctly uninstalled the previous one) to be sure of correct Superuser-Bin and Superuser/SuperSu-Versions, but nothing changes. Even with superuser, same behavior...
May be a good news is, i´ve also tried a costum rom (CustoNexus) and couldnt see the problem with that rom. So may be with the next update to jelly bean our problem is solved too...
Let´s wait and hope...
Click to expand...
Click to collapse
Ok, thanks a lot for your quick answer... so, lets hope that the next version will solve the issue...
I never did these steps:
Updated superSU
Updated binaries
Upgraded to pro
Works like a charm
Sent from my LG-P880 using xda app-developers app
alekthefirst said:
I never did these steps:
Updated superSU
Updated binaries
Upgraded to pro
Works like a charm
Sent from my LG-P880 using xda app-developers app
Click to expand...
Click to collapse
Problem will occur sometime later again.
Unfortunately I have the same Problem with SuperSu Pro, it works after a Reboot but some Time later it freezes, but the Apps with root permissions continue to run normally.
Good News, the problem is gone after upgrading to JB 4.1.2 V20a. No more freezes with Superuser or Apps which needs Root.
This was my hope and its OK now!!!
Btw I use Superuser (not SuperSU) but I had the problem on ICS exactly the same way with Superuser and SuperSU. So I think it should be OK now even with both of them...
Related
Last night I was lurking in market and I realized there was some updates pending to apply including Superuser but I don't remember the other 3... there was a little bit strange because wasn't in another color like normal pending updates, so I enter in tne app page, push "update" button and the push "ok" button, this for every one...
Updates was downloaded but when was applying suddenly the nook reboot... well, try to reboot, but something goes wrong... boot starts ok, but when came to the outlined white "nook" and outlined raindow "color" stops drawing the "l", and reboot again and again.
Well, today I make a 2GB SD with ClockWorkMod 3.2.0.1, manualnooter-4-5-18.zip and manualnooter-4-6-16.zip like last time... first I apply MN4.5.18, but when reboot happens the same thing... then I apply MN4.6.16 and the same thing happens...
So, anybody figured has idea what is going wrong and what I have to do to fixit???
Thanks a lot
Try this
Had the same problem this morning and found this thread. It worked for me but now need to reinstall Flash. http://forum.xda-developers.com/showthread.php?t=1208896
Same issue - flash zip fix didn't work for me
fealuin, did the flash zip work for you?
I got the flash update today, rebooted and hit the same problem where it's looping on the colo... Before I read this thread I tried reapplying the copies of manualnooter 4.5.18 & 4.6.16 I had with no luck.
I've tried the flash zip, reapplying the manualnooters, clearing cache & davlik cache, but apart from taking longer on the initial boot before looping, it keeps doing the same thing.
I had just installed and run nsr (nook screen recalibrate), which automatically rebooted, but I don't know if that could be an additional cause.
At this rate I'm close to wiping and starting from scratch, but I'd welcome any suggestions. About to go on vacation, and I was in the middle of a book...
Thanks.
Same thing happened to me when I uninstalled ad free and tried a new app of the same likeness. Had to flash to a backup
dadmarshall said:
Had the same problem this morning and found this thread. It worked for me but now need to reinstall Flash. http://forum.xda-developers.com/showthread.php?t=1208896
Click to expand...
Click to collapse
Worked for me. Thanks to GMPOWR's solution
deadermeat said:
fealuin, did the flash zip work for you?
Click to expand...
Click to collapse
Nope.
My nook color is underpower... I just put it to charge but the original cable is damaged, so I use a standard cable to charging and is pretty much slow than original cable...
I hope in about 1 hour have enough charge... I will be reporting
Well... it works... market return to an old version so I reapply mn 4.6.18... all looks like work fine
Sent from my NOOKcolor using XDA App
this is exactly what just happened to me. flash update didn't work either.
Today by mistake i updated adobe flash player to version 11, since then it stuck in boot looping, i tried to flash the zip file many a times but no success. it still in boot loop. please let us know is there other way to delete the flash player except adb as it dose not work for me.
Flash shouldn't have anything to do with booting up. How exactly did you update it, the market, adb?
+1 here. Tried flash fix zip, and recovery fix zip,...nada. I had the updates hit last night, borked my nook, and today I'm attempting a cure. Just about ready to revert to stock and start again.
Anybody found anything yet?
I have no problem with updating or using Flash 11.
Maybe I'm lucky.
sym1 said:
+1 here. Tried flash fix zip, and recovery fix zip,...nada. I had the updates hit last night, borked my nook, and today I'm attempting a cure. Just about ready to revert to stock and start again.
Anybody found anything yet?
Click to expand...
Click to collapse
Not sure if you can fix it if its already doing the boot loop, but I was able to prevent it from happening by using the instructions posted. Uninstall flash and air with titanium backup and then load the flash.zip with cwm and you should be able to then update flash through the market without boot looping. To get the market working, I did a data wipe of the market app using titanium backup.
votinh said:
I have no problem with updating or using Flash 11.
Maybe I'm lucky.
Click to expand...
Click to collapse
I don't have any issues with it either......
I have the same problem. Stock rooted. Updated superuser, noticed I had an update to abobe air installed. When I rebooted I got stuck in this loop.
I tried flash fix, but it did nothing.
so is the only fix to wipe and re-install everything?
bullfrog527 said:
so is the only fix to wipe and re-install everything?
Click to expand...
Click to collapse
That's what I had to do the first time it auto updated flash as I couldn't figure it out (and the flash fix wasn't out). I made sure to turn off auto updated for flash after that and I installed Titanium Backup so I wouldn't have to remember all the apps I wanted. I managed to get the new market working by data wiping the market app, but this turned on auto updating again. Luckily, now there is a way to avoid the bootloop if it auto installs flash. You just have to make sure to remove the updated flash and air using titanium BEFORE you reboot, or you'll get stuck in the bootloop again. I know, that doesn't help you now, but once you run the fix, you should be able to safely update flash. If it happens again, you'll have titanium backup so it'll be easy to restore. As I have all of the root and flash fix files loaded on my SD card along with CWM, I could restore my nook to it's current state in about 10 minutes if it were to get stuck again, but hopefully that won't happen.
I had the same problem. I even flash with stock 1.1 and it did not work. Somehow I think I get rid of ROM manager after that and I can restore to stock 1.2 after 8 un-successful reboot.
repair path?
so in order to fix this issue I must
1. in CWM wipe all and re-flash stock 1.2
2. update to 1.3,
3. run MN 4.5.18 and then 4.6.16a
4. download TB from market
5. uninstall Adobe Flash and Adobe AIR
6. Flash "Adobe Fix"
7. RE-install Adobe Flash and AIR
Is this the way to go?
bullfrog527 said:
so in order to fix this issue I must
1. in CWM wipe all and re-flash stock 1.2
2. update to 1.3,
3. run MN 4.5.18 and then 4.6.16a
4. download TB from market
5. uninstall Adobe Flash and Adobe AIR
6. Flash "Adobe Fix"
7. RE-install Adobe Flash and AIR
Is this the way to go?
Click to expand...
Click to collapse
Thats what worked for me, though my sequence may have been a little different (I updated to 1.3 with an already rooted 1.2).
My phone was bricked yesterday. Then I used SMF to recover, so I turned back to v10a. (from smart flash tool)
Installed Rom manager rooted and installed marvel rom.
Then I tried miui 2.1 rom.
Then i tried to restore my backup(marvel) what i did with rom manager. Phone bricked again.(Blue screen on android)
Then I used SMF to recover again. --> v10a.
Now in rom manager pressin flash cwm button in menu but nothing happens. I rooted phone. Root is workin well in other programs like Titanum. Tried reboot into recovery causes factory reset bcs of cwm i think.
Any way to solve this problem? Or can I install zipaligned rom like marvel, zeus without cwm? Like S/E tool. Power + volumeUp...
Did you do all the wipes before flashing the rom?
Didn't you missed any step?
I cant see even recovery menu. To wipe data/dalvik.
I coulnt flas cwm, so when Im trying to do reboot into recovery via Rom Manager, skips that menu(controlled with volume and power buttons dont know the name) and v10 is booting with factory reset.
Do you have an internet connection when trying to flash cwm?
Trolling in the deep
Just root it again, reboot, install busybox, reboot, install cwm and all should work just fine
Sent from my LG-P970 using Tapatalk
Yes I had internet. I installed Rom Manager from market.
I will follow this link. It gives you offical 20o Rom rooted and touch version of cwm. Hope it will work for me.
And I realized that I really missed LG's UI.
http://forum.xda-developers.com/showthread.php?t=1480392&page=20
You probably forgot "wiping" before restoring your nandroid. Any this shall be a lesson. From now on you won't forget.
had the same problem before, i always had a bug installing CWM, caused factory reset everytime , but when i downloaded it again it works well..
Pondera said:
You probably forgot "wiping" before restoring your nandroid. Any this shall be a lesson. From now on you won't forget.
Click to expand...
Click to collapse
I've never wiped before restoring a nandroid, and believe me I've flashed my OB a lot while i was debuting my Lezo mod.
Trolling in the deep
I solved the problem. Now I have offical 20o ROM offical and rooted. Happy with that. Until stable CM7 or MIUI release I will stop trying ROMS.
Hello,
I flashed CM11 yesterday and everything went alright. This morning I noticed I had an update for it and proceed to do it.
After the instalation and optimizing all apps it asked me for my simcard PIN and after I unlocked the phone it just went back to the cyanogenmod logo over and over.
I tried to reboot phone but it didn't help.
I've tried to search for similar threads but since i'm a newbie (first time I ever flashed anything) to this I decided to create this thread.
What should I do?
Thank you!
try to use flashtool. google it on how to use flashtool or check other threads.
So I guess i have to flash a stock ROM with flashtool and do it all over again right?
And btw, any reason you guys might think It got stuck in bootloop after I updated CM11? I came from a fresh stock rom. I'm kinda scared it might happen again after the reinstall.
Can't you enter recovery to flash a nandroid backup? (If you have one)
If not, you have two options to choose from.
Fastboot or flash a kernel with CWM or TWRP.
ADB push a zip file of a ROM and flash that.
Flash an FTF file using flashtool and start all over again.
There are many reasons why you're stuck in bootloop at the moment.
With the info you provided, there's no way of telling what caused it for you.
Well, i flashed stock ROM with flashtool, installed CM11 and I had no problems.
Went to settings and OTA update was available. Downloaded it and installed it, stuck in loopboot again. I just can't figure out what's wrong. My phone has bootload unlocked.
Might just do it all over and not update, is that a problem?
Don't use OTA, just download and flash updates manually using recovery.
In the future, for your ease, if this happens again just wipe the phone very clean (cache, /system, /data etc except /boot) and then re-flash the CM zip that you have.
It is a good practise if you make a nandroid backup before flashing a newer version of zip, in case of breaks. Or, you can have Titanium Backup to backup your apps automatically (pro version) everyday, so that you can be ready if there will be something bad happen.
So, this morning I had a notification saying that an update to v20c is available for my stock LG 4.1.2. So, after the update data was downloaded, the phone needed to restart in order to install the update. When it restarted, the CWM Recovery came up and that's when I knew I shouldn't have tried to update the phone. So I tried restarting it again and the CWM Recovery was still the thing that came up. And so on... I also tried to wipe cache, I did a factory reset... Nothing works. Please, help!
Flesh another rom from it.Or Flesh kdz file.
Hello !
At first I apologize for my English, I am French.
So i used the custom ROM Validus and this problem appears for every ROM. Like you know, when you root, you can't use snapchat and u need to login before you root your phone. So i installed Validus, i install all apps i need and login (included snapchat) but after that when i flash super su, my phone reset and i have a error message which flashes. In the message i have ".com.android" something and i'm obliged to shutdown the phone, reset the phone and re-install the ROM.
And this appears with all ROM (Tesla, Tuga etc...) and i don't know how can i use snapchat acutally.
I tried to disable super user in the app, doesnt work
I saw we can use xposed app but for 7.1.1, it's not possible actually
Any ideas ?
Thanks,
Snapchat discorvers root as it denies working on it. After flashing install snapchat and login. Then return to recovery and install SU afterwards. Possibly you have to use tools like RootCloak.
Inciter said:
Snapchat discorvers root as it denies working on it. After flashing install snapchat and login. Then return to recovery and install SU afterwards. Possibly you have to use tools like RootCloak.
Click to expand...
Click to collapse
It's what i tried to do (without RootCloak) and when i do that, i lost all my data (like i wipe all data when i try to install SU...) but RootCloak works for 7.1.1 ? Because i already tried to flash Xposed, doesnt work (error 1)
Try SUHide. Though the data wipe seems odd.
Inciter said:
Try SUHide. Though the data wipe seems odd.
Click to expand...
Click to collapse
I tried to flash suhide after flash ROM, doesnt work, the ROM don't charge (the loading of the ROM don't stop)
PS : I tried with Validus ROM and others, same things
Here's a workaround for Nexus 6. Maybe it's working on 3T as well. Something else I found here.
Nevertheless, the auto data wipe is strange. Did you clean or dirty flash?
Inciter said:
Here's a workaround for Nexus 6. Maybe it's working on 3T as well. Something else I found here.
Nevertheless, the auto data wipe is strange. Did you clean or dirty flash?
Click to expand...
Click to collapse
I don't know what is dirty flash ? What i know is i alway wipe all data before install any custom ROM
But I found a solution. I installed Root Swich, it's a simple app which allows to deactivate the root and activate it as you want.
So i disabled root and install snapchat and login successfully.
But i want to understand why when i want to flash super su for any custom ROM i have a auto data wipe :/
Since your device is beyond my reach I can't help investigating the problem. Maybe the data is not really deleted but r/w permissions have just been modified and cannot be accessed any more. But anyway, I'm glad your found a workaround.
Inciter said:
Since your device is beyond my reach I can't help investigating the problem. Maybe the data is not really deleted but r/w permissions have just been modified and cannot be accessed any more. But anyway, I'm glad your found a workaround.
Click to expand...
Click to collapse
Thanks for your help anyway !
Now I just need someone who knows how can i fix the problem of data. Cause if one day i will need to flash something, it's gonna wipe the data of my phone
Maybe if i do a clean factory reset or something ? Cause i used my 3T a lot cause of this to find a solution so maybe something happenned when i tried so many things. (Test of ROM etc ...)
I have more information, when I install any custom ROM and after that I want to flash super su, wipe cache etc ... I boot on the ROM normally but i see my phone haved a factory reset and i have this ".com.android.phone has stopped" Impossible to remove the message and I am forced to wipe again data and reinstalll the ROM.
Conclusion : I can install ROM but after that, i can not do anything, if i do anything, BOUM, reset factory. And i don't understand why ....
I tried the last (Unofficial) TWRP but when i tried to boot on the ROM after flashing it, my phone didn't boot on the ROM but always on TWRP.
Maybe I brick my phone but i can use it, i don't have storage problem or others so ...
I'm lost ... Any ideas ?
up ?
Balashe said:
up ?
Click to expand...
Click to collapse
Do you have this issue with only flashing super su or try to boot into recovery don't do anything and reboot check if it still reset everything.
Which recovery you are using?
The version
nitinvaid said:
Do you have this issue with only flashing super su or try to boot into recovery don't do anything and reboot check if it still reset everything.
Which recovery you are using?
The version
Click to expand...
Click to collapse
I have this issue only flashing super su, when i try to boot into recovery and then reboot into the ROM, nothing happened.
I use 3.0.3.1, when i tried 3.0.4.0 and flash a ROM, the phone only boot on recovery and not into the ROM
I'm actually having a similar issue. One day my phone was acting weird and I had to force reboot. I noticed after that I lost root. I've tried flashing SuperSU again, and it flashes fine but I still don't get root. This morning I upgraded to 4.0.3, and tried flashing root, and same thing no root.
The weirdest part is I can flash a custom kernel with TWRP 3.0.3.1 and the kernel flashes fine and I have the custom kernel, if I try flashing SuperSU, it flashes fine but I get no root AND it removes the custom kernel!!! Everything I'm using is the most updated too. What gives? I want root back....