Database Develop

[ROM][8.12.11][MIUI.us OFFICIAL] MIUI4DX 1.8.12

http://rootzwiki.com/showthread.php?t=1820

10charrrrrrr

10charrrrrrrrr

10charrrrr

I have it up and running on my X. Got the link from your thread in Rootzwiki. Thanks for releasing this.

I've got this rom on my samsung fascinate, and I have to say, it's the best rom out there. Even better than cm7. Does every single function work with this rom (gps, camera?) And in order to install it, is all I need to be on a rooted .34 and use bootstrap?

Sold my fascinate and my droidx and now both have miui and my HTC device does not. Looks like i have cake on my face.

shilohdrummer said:
I've got this rom on my samsung fascinate, and I have to say, it's the best rom out there. Even better than cm7. Does every single function work with this rom (gps, camera?) And in order to install it, is all I need to be on a rooted .34 and use bootstrap?
Click to expand...
Click to collapse
It's a nice rom, I was on CM7, went to Apex, and then used bootstrap to get to Miui. I heard that the GPS does work(but my phone isn't activated and i can't use wifi to try it myself), I can confirm that the camera(pictures and video) works. as far as rooted .34, I don't know what that means?

thanks for ur quick response. So it's assumed that all the functions are working! I'll put this on my cousin's droid x asap! What I meant was, what were the initial steps that needed to be taken before I install this rom. There are no clear steps that I can find on this post at least.

You're welcome, all I did was use the Droid 2 bootstrapper(since that was what i had, and I was on Apex at the time which I think is a froyo based rom?), and went into recovery and did a factory restore, and installed the zip, and it booted. I took a risk, skipped backing up the rom and stuff before installing MIUI, but yeah make sure to back up the rom and stuff before you use the bootstrapper. I also read that full resolution should be working on the camera, the MIUI camera isn't included though, just the AOSP camera. Also the live wallpaper(only one on there) works.

Juanito216 said:
You're welcome, all I did was use the Droid 2 bootstrapper(since that was what i had, and I was on Apex at the time which I think is a froyo based rom?), and went into recovery and did a factory restore, and installed the zip, and it booted. I took a risk, skipped backing up the rom and stuff before installing MIUI, but yeah make sure to back up the rom and stuff before you use the bootstrapper. I also read that full resolution should be working on the camera, the MIUI camera isn't included though, just the AOSP camera. Also the live wallpaper(only one on there) works.
Click to expand...
Click to collapse
I understand this runs the froyo kernel so im on liberty 2.1 can i bootstrap to recovery and flash this? Oh and do I need google apps as well?
Edit: Do I need to sbf back to stock then to cm7 then to miui?

Which version of Android is Liberty 2.1 based on(not sure if it matters as much as which kernel it's based on, if someone will clear it up for me), and which kernel is it based on? I don't know much about that rom. I know that at least the Market and Google Talk are included, Gmail is in there also(don't know if that's something that wouldn't be in a custom rom ie CM7).
EDIT: You should be able to install it from rooted froyo at least, but it would be good to find out if you could do it from Liberty, so you won't waste your time just in case you can.

Its 2.2 and I couldnt get it to install so i sbf'd back to stock and trying again.

Have you got it running? EDIT: This is Juanito216, i didn't know my sisters account was logged in lol.

Not booting apparently you need d2 bootstrap........sbf'ing again.
Edit: Still at moto logo. 4 minutes now not booting.

I recently installed MIUI on a coworkers OG Droid and fell in love. To have it on my X just a week later is awesome. This ROM is tizzits.

I can get cm7 to boot up but not miui wtf am I doing wrong?
Where the hell is everyone? Even IRC is completely empty.

Have you done a factory restore? Did you try wiping cache?

Juanito216 said:
Have you done a factory restore? Did you try wiping cache?
Click to expand...
Click to collapse
Im on my third sbf now. I rooted stock froyo got d2 bootstrap, got cm7 running, updated cwm to the latest version, wiped data and flashed miui and get stuck at m logo everytime.

I don't know what the issue could be, hopefully you can get it up and running soon.

Droid bionic flashing issues

I am running the most current version of Liquid ICS on my Droid Bionic and it is rooted and I use safestrap. However recently in the past couple of days when I have tried to flash it to a different ROM (i.e. AOKP, CM9, MIUI, etc) I get the motorola screen on reboot and then my screen goes and stays blank and does not load. I then have to pop my battery out and wipe wipe wipe and then restore.......Any advice??? (yes I also installed my gapps)
Motorola Droid Bionic / [AOSP]LiquidSmooth-ICS-v1.5mr1 ROM

SexyGermanChik said:
I am running the most current version of Liquid ICS on my Droid Bionic and it is rooted and I use safestrap. However recently in the past couple of days when I have tried to flash it to a different ROM (i.e. AOKP, CM9, MIUI, etc) I get the motorola screen on reboot and then my screen goes and stays blank and does not load. I then have to pop my battery out and wipe wipe wipe and then restore.......Any advice??? (yes I also installed my gapps)
Motorola Droid Bionic / [AOSP]LiquidSmooth-ICS-v1.5mr1 ROM
Click to expand...
Click to collapse
Hey man I have been having the same issue(s) as well. I have tried both CWM, and Safestrap following the typical clear cache/factory reset/wip dalvik etc(currently I am on .233). I suspect these roms (AOKP, and CM9, MIUI, etc) simply do not work on any of the other leaked based ROMS. From testing(I have tried everyone lol), they install fine on .902 based firmware some even work on .905, but installing over any of the ICS leaks seems to create boot loops(test in CWM, and Safestrap the results are the same). I would recommend flashing back to .902/905 and trying again. I am smelling a lot of bullshting come from people who say they are able to flash over any of the ICS Leaks. btw are you using CWM(4.x.x.x/5.x.x.x) or Safestrap?

Atheistnofaith said:
Hey man I have been having the same issue(s) as well. I have tried both CWM, and Safestrap following the typical clear cache/factory reset/wip dalvik etc(currently I am on .233). I suspect these roms (AOKP, and CM9, MIUI, etc) simply do not work on any of the other leaked based ROMS. From testing(I have tried everyone lol), they install fine on .902 based firmware some even work on .905, but installing over any of the ICS leaks seems to create boot loops(test in CWM, and Safestrap the results are the same). I would recommend flashing back to .902/905 and trying again. I am smelling a lot of bullshting come from people who say they are able to flash over any of the ICS Leaks. btw are you using CWM(4.x.x.x/5.x.x.x) or Safestrap?
Click to expand...
Click to collapse
I am using safestrap and never had a problem until last week flashing from my ICS leak to the other ROMS. Should I go back to stock and then install the leak again?

SexyGermanChik said:
I am using safestrap and never had a problem until last week flashing from my ICS leak to the other ROMS. Should I go back to stock and then install the leak again?
Click to expand...
Click to collapse
Yes, I would flash back the dev's are not putting correct information out most of these ROM'S (AOKP/CM9Gummy, etc) are not designed to be installed over any of the OTA Leaks(people keep insisting on it), and will cause boot loops like crazy. I have tested on two bionic's and the results where the same flashing over any ICS Leak to AOKP/CM9 etc will cause issues regardless of what 2nd stage boot loader you are using(Safestrap, or CWM via bootstrap). I would recommend flashing back to 902, or 905 using the SBF/FXZ method and installing eclipse 3.0(for .905 baseband), or sticking with the OTA Leaks untill the issues with flashing ROMS in both Safestrap, and CWM have been resolved or the dev's actually give solid advice(i.e. what firmware is actually needed, or what flashing requirements should be meet. Thanks again!!!

Atheistnofaith said:
Yes, I would flash back the dev's are not putting correct information out most of these ROM'S (AOKP/CM9Gummy, etc) are not designed to be installed over any of the OTA Leaks(people keep insisting on it), and will cause boot loops like crazy. I have tested on two bionic's and the results where the same flashing over any ICS Leak to AOKP/CM9 etc will cause issues regardless of what 2nd stage boot loader you are using(Safestrap, or CWM via bootstrap). I would recommend flashing back to 902, or 905 using the SBF/FXZ method and installing eclipse 3.0(for .905 baseband), or sticking with the OTA Leaks untill the issues with flashing ROMS in both Safestrap, and CWM have been resolved or the dev's actually give solid advice(i.e. what firmware is actually needed, or what flashing requirements should be meet. Thanks again!!!
Click to expand...
Click to collapse
So I wonder why it has worked for this long and just stopped flashing?

Just got a new Droid 3!

Hello Guys!
I just bought a droid 3 unlocked, are in Italy.
I have noticed that I have a software version .906 (The last I think), following some guides I installed Rom manager and flashed the recovery from them.
Now I wanted to ask, I can put that rom without incurring risks and fully functional?
And what is the procedure?
Thank you so much guys!

You'll want to install Safestrap 3 from Hashcode which is the latest recovery for the Droid 3 and allows you to install ROMs that use a custom kernel with kexec. Look in the development section for the thread.

I can put that rom without incurring risks and fully functional?
Click to expand...
Click to collapse
moto phones are pretty safe to root and rom, just be prepared to flash a .sbf to recover
but safestrap, makes flashing roms and restoring stock, too easy
cm10 has several things that just don't work, cm9 is better
steel droid ics 5.4 is good or steel droid GB 4.5
with safestrap 3 you flash 4 roms plus stock, and go back and forth just with a reboot
you need to remove rom managers cwm first
edit:
several how to videos here
How to Video's Root, safe strap, kexec, and much more

really thanks.
1) cm9 has not working cam, true?
2)How can i remove the rom manager and the recovery that rom manager have installed?
3)I just have to wipe everything and flash the zip, for every rom?
4) What about minimoto?
5)There is CM7?
Thanks..!
6) My droid is unlocked from when i have It. If i chance rom It Will lock again?

davibs said:
really thanks.
1) cm9 has not working cam, true?
2)How can i remove the rom manager and the recovery that rom manager have installed?
3)I just have to wipe everything and flash the zip, for every rom?
4) What about minimoto?
5)There is CM7?
Thanks..!
6) My droid is unlocked from when i have It. If i chance rom It Will lock again?
Click to expand...
Click to collapse
I'll try my best to help you out here but..
1.) The stock based builds of cm9 had a working camera for pictures only, but those builds are gone and no longer compatible with safestrap 3, otherwise development is focused on kexec.
2.) You should be able to uninstall it from rom manager itself I believe
3.) Sometimes, only for something really major like new codec or something, sometimes but its not always necessary and your stock system will be fully protected.
4.) I don't know what that is, lol i'm new here.
5. There is CM7 but it was never worked on nor finished so don't bother with it really.
6.) I really don't know but I highly doubt it.
Otherwise i'm glad to help you out.

davibs said:
really thanks.
1) cm9 has not working cam, true?
2)How can i remove the rom manager and the recovery that rom manager have installed?
3)I just have to wipe everything and flash the zip, for every rom?
4) What about minimoto?
5)There is CM7?
Thanks..!
6) My droid is unlocked from when i have It. If i chance rom It Will lock again?
Click to expand...
Click to collapse
1 true
2 should be option to remove recovery in rom manager
If you have trouble flash sbf and wipe data
3 yes
4 haven't used it
5 yes haven't used it
6. Will stay sim unlocked
Sent from my XT862 using xda premium

[Q] Problems upgrading from CM9 to 10.1

Maybe I havn't done my homework properly but I need to ask.
I have been running an OLD version of the CM9 (2012-07-25) on my xt862, and I finally decided to upgrade.
To my delight, I even found out there was an CM10.1 for my beloved Droid3.
I upgraded safestrap to 2.01 and started installing the lastest 10.1 image.
But when the upgrade is done, and I reboot, it seems to boot into stock rom for some odd reason.
After some reading I found that if charger is in while booting, it will boot into stock rom because of some bug.
So I tried to boot without charger - Same result.
Then I though, well, I had the charger plugged when upgrading.. maybe that's the issue.
Pulled the charger, rebooted, reinstalled, rebooted - same result.
I am now back on my backup with the old ICS image.
Am I doing something wrong? Or do I need perhaps to use the Saftestrap3?
I chose not to install the safestrap3 due to the incompatibility with the safestrap 1/2 backups.
Is there someone who can advice me on how to upgrade properly, and preferably without risking to loose my backups, or atleast a good way to convert/make new backups.
By the way, can I safely install saftestrap3 (if needed) from safe system? Or do I need to go back to stock for that?
(I went back to stock when upgrading from safestrap 1.08 to 2.01 though).
Also, one more question, I rad a lot about the camera not working.
I remember reading about the camera not working properly when I upgraded to CM9, but that was only video recording I think.
Is it the same problems in CM10.1 or is it the entire camera not working?
Edit: Maybe I should add, I am talking about Hashcodes rom's, nothing else.

Hmm.. anyone?

noratx said:
By the way, can I safely install saftestrap3 (if needed) from safe system? Or do I need to go back to stock for that?
(I went back to stock when upgrading from safestrap 1.08 to 2.01 though).
Click to expand...
Click to collapse
You need to upgrade from non-safe. Switch back to non-safe, start Safestrap, uninstall recovery. Restart to make sure that Safestrap is no longer running. Uninstall the current Safestrap app, and then install Safestrap 3.05. Start it, and tap the install recovery.
That should do it.
I haven't installed CM10.1, so can't answer any questions about that. I do know that it must be installed in the first ROM slot.

Yes, you definitely need to upgrade your Safestrap. Hash's latest Safestrap for D3 is v3.05.

[Q] ow to flash Minimoto as default rom and uninstall safetrap into Verizon Droid 3

I have my Droid 3 working with the Stock rom and the safetrap using MiniMoto. Right now with all the changes I have made to it it works good, now I want to move it from safetrap to the phone as the default rom, I haven't found much info of going from safetrap to flash into the phone, any ideas?
As far as I know, I see that I would have to use the rsd, but I see that it flashes img files, I just have the zip file from the latest minimoto so... I am lost here.

XDADoog said:
I have my Droid 3 working with the Stock rom and the safetrap using MiniMoto. Right now with all the changes I have made to it it works good, now I want to move it from safetrap to the phone as the default rom, I haven't found much info of going from safetrap to flash into the phone, any ideas?
As far as I know, I see that I would have to use the rsd, but I see that it flashes img files, I just have the zip file from the latest minimoto so... I am lost here.
Click to expand...
Click to collapse
AFAIK there is no way to transfer a rom from safestrap to the stock system.
As a thought, and I have no idea if this would work, if you're using safestrap 3+ it saves custom roms as image files on the sd and mounts then for use. Logically you could try flashing this image file using motofastboot but I'm just talking out my ass, so...
If you're on an older safestrap, I had an idea about this once, I'll see if I can find the post I wrote when I get off work. I never tried it but it made sense to me
Sent from my XT860 using xda premium

I see...
So, just to be clear, to flash over stock it has to be an img file. The rom developer must have this option instead of zip? I'm looking to replace the stock rom with something less bloated like MiniMoto but as far as I see most of the Droid 3 roms apparently only run on Safestrap (I have the latest version 3.5) Damn I was looking to move all to the phone system so it would run a little bit faster
P.D.: Are there roms that could be flashed to replace the stock one then?

XDADoog said:
I see...
So, just to be clear, to flash over stock it has to be an img file. The rom developer must have this option instead of zip? I'm looking to replace the stock rom with something less bloated like MiniMoto but as far as I see most of the Droid 3 roms apparently only run on Safestrap (I have the latest version 3.5) Damn I was looking to move all to the phone system so it would run a little bit faster
P.D.: Are there roms that could be flashed to replace the stock one then?
Click to expand...
Click to collapse
Any rom can be flashed over stock, just not worth safestrap. You need plain old bootstrap app. However that doesn't help you move an existing rom install(which is what I thought you were asking)
I don't use safestrap on my phone and have minimoto installed as my stock rom. Just be aware brick recovery can be more difficult as I've had issues getting back into cwm after flashing a rom. Rsdlite will still get you back to stock no problem though so not that big a deal
Here is a http://db.tt/rNhVQCsclink for bootstrap. You'll need to boot into stock system and completely remove safestrap before you install this. I like to rsdlite or fastboot to complete stock personally, but not strictly necessary. Safestrap backups are not compatible with cwm. I can't fully guarantee this bootstrap works. I use a milestone version(since I have the XT860).
Sent from my XT860 using xda premium

So, to understand, I could flash minimoto over stock, but not use safestrap later? I had the idea to have flashed minimoto over stock and then a safestrap with other minimoto, if one fails I can go over the other and make changes accordingly. Bad or good idea?

XDADoog said:
So, to understand, I could flash minimoto over stock, but not use safestrap later? I had the idea to have flashed minimoto over stock and then a safestrap with other minimoto, if one fails I can go over the other and make changes accordingly. Bad or good idea?
Click to expand...
Click to collapse
Once you've flashed minimoto to stock you can remove the bootstrap and reinstall safestrap, yes. It seems redundant to have 2 versions of the same rom flashed to the phone, seems like less effort to just make sure to backup before making any changes, but it's your phone to do with as you will.
I don't use safestrap because I don't care about being able to reflash my phone. I hate this thing and am just waiting for it to die so I can replace it.
Sent from my XT860 using xda premium

:cyclops::cyclops: is not such a bad phone, if it just had more ram it would be fine. But 512Mb is just not enough (never ever )

XDADoog said:
:cyclops::cyclops: is not such a bad phone, if it just had more ram it would be fine. But 512Mb is just not enough (never ever )
Click to expand...
Click to collapse
And it's stuck on gb. I can't listen to music and have my running app open. One of them will close due to lack of ram. Keyboard sucks ass on mine. Button presses only register half the time. Same for the capacitive keys. Apps often take up to 10 seconds to Open(probably because it needs to clear ram)
Sent from my XT860 using xda premium

So, just to be sure (sorry for the delay, on monday I am officially on vacation so I was doing all the make up work that I had to do :fingers-crossed: )
I can flash minimoto over stock
Then install safe trap and install minimoto on the rom slot
Why?
Because I like minimoto and I have found that for this phone and my lifestyle it fits really well, the problem is that on safestrap mode I believe the lag is because he's reading some stuff from the sdcard and the internal memory (both I think and believe (I could be wrong, I am just an advanced user ) are slower than the reserved space for the rom itself), so I will start from scratch again install only the programs I really need on the phone rom and leave the safestrap rom for those scenarios where the phone is stuck on something.
Is that all virtually correct and possible, right?

XDADoog said:
So, just to be sure (sorry for the delay, on monday I am officially on vacation so I was doing all the make up work that I had to do :fingers-crossed: )
I can flash minimoto over stock
Then install safe trap and install minimoto on the rom slot
Why?
Because I like minimoto and I have found that for this phone and my lifestyle it fits really well, the problem is that on safestrap mode I believe the lag is because he's reading some stuff from the sdcard and the internal memory (both I think and believe (I could be wrong, I am just an advanced user ) are slower than the reserved space for the rom itself), so I will start from scratch again install only the programs I really need on the phone rom and leave the safestrap rom for those scenarios where the phone is stuck on something.
Is that all virtually correct and possible, right?
Click to expand...
Click to collapse
I get lag using it on stock rom too. You may find some improvement by flashing it over stock. Safestrap mounts an image file as a loop device, which I have heard is slower, although I couldn't confirm that through googling. Android seems to start to lag over time, I find flashing fresh often gives improvements, then it slows down again, then flash again etc
Sent from my XT860 using xda premium