Hey guys,
I flashed on a sense 4.1 rom from a chinese website, I used it for a bit,
until i rebooted and wifi would not work.
so i got back into recovery, (4ext touch) and wiped everything.
I then tried to flash on unofficial CM10, but it came up with status 7 symlink error.
Any ideas guys?
from what i read, a kernel can repartition the internal storage or something?
Also running blackrose 2.02
Thank you!
EDIT: the error comes up with EVERY rom i try to flash,
and now my phone refuses to turn on, like the numerous times it has done that
Related
I looked at all other threads on here and couldn't find a start forward answer to my problem most talk about the SD and ext partitions that I have never done
Problem started last night when trying to flash the new RC1 of Zero Hero once flashed phone just sat there at the first boot screen then tryed to go back to my current rom I was using and got a error while writing boot
then I noticed when I wipe dalvik cache I get
E: Can´t mount /dev/block/mmcblk0p2 (File exists)
So I was able to get the stock rom back rooted and reflashed CWM and works just fine but if I try to flash another rom it does the samething again would really like my ASOP back
Little update on the issue made a ext2 partition on my sd card resolved the mount errors but still if I try to flash something after formatting everything phone is still locked up at the HTC screen
Also if I try to restore a backup it errors when trying to write to boot using Clockwork Recovery 2.5.0.7
Try pointing this out in the zero ROMs thread. Maybe the development team would know more. Or just PM one of their developers
Sounds like u could try a different recovery.
Good luck
Sent from my HERO200 using Tapatalk
Tried a different recovery and that worked for me
so if you have these problems just flash a different recovery guys
I have the same issue whenever I flash any of the newer cwm recoveries. Only certain ones work for me. Strange.
Right now I'm using a custom 3.0.2.4 image from april 9th, 2011 I found on XDA.
There for awhile the 2.5.07 was working just fine but decided it was too cool for my phone so I got the stock 5.0.2.6 version on here and it worked like a charm running TeamHeroC 2.3.7 has to be the fastest I have ever used
Hello all,
I have an issue with latest CWM 5.5.0.4 recovery. It says the following error:
E:Error in /cache/recovery/last_log
(Read-only file system)
and other similar errors:
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
and I'm unable to reflash GalaxianSoup ROM nor restore the original backed up 3.2 factory rom.
What actually happened ?
Once bought, I managed to root, flash CWM 5.5.0.4 recovery and install the latest GalaxianSoup ROM. Everything based on the guides in development forum and successful (all latest versions). All cool! System was working fine.
Yesterday, I was using tablet, installed few apps, nothing special and later left tablet turned on and charging. When I came back, it was turned off. Okay, tried to turned on, but the system never booted and always looped (seeing only Google logo and moving gears). I rebooted into recovery and noticed the error (see above).
Now, I'm basically unable to do anything. I tried to wipe data, cache and Dalvik cache several times, and reflash GalaxianSoup again (Galaxian + Gapps) or also restore the 3.2 system backup that I've made (always fails).
I've read on some other forums that it might have something to do with damaged SD card partition or something.
I'm out of ideas. Can anyone help me pleeeeease?
EDIT: I've got european Samsung Galaxy Tab 8.9 16GB WIFI version.
EDIT: I must correct myself. After rolling back to factory rom, I was experiencing the same issues, seems there some hardware issue. I sent the tablet back for repair, seems now it had nothing to do with GalaxianSoup. No need to worry, keep up the good work.
whiplash84 said:
Hello all,
I have an issue with latest CWM 5.5.0.4 recovery. It says the following error:
E:Error in /cache/recovery/last_log
(Read-only file system)
and other similar errors:
E:Can't open /cache/recovery/log
E:Can't open /cache/recovery/last_log
and I'm unable to reflash GalaxianSoup ROM nor restore the original backed up 3.2 factory rom.
What actually happened ?
Once bought, I managed to root, flash CWM 5.5.0.4 recovery and install the latest GalaxianSoup ROM. Everything based on the guides in development forum and successful (all latest versions). All cool! System was working fine.
Yesterday, I was using tablet, installed few apps, nothing special and later left tablet turned on and charging. When I came back, it was turned off. Okay, tried to turned on, but the system never booted and always looped (seeing only Google logo and moving gears). I rebooted into recovery and noticed the error (see above).
Now, I'm basically unable to do anything. I tried to wipe data, cache and Dalvik cache several times, and reflash GalaxianSoup again (Galaxian + Gapps) or also restore the 3.2 system backup that I've made (always fails).
I've read on some other forums that it might have something to do with damaged SD card partition or something.
I'm out of ideas. Can anyone help me pleeeeease?
EDIT: I've got european Samsung Galaxy Tab 8.9 16GB WIFI version.
Click to expand...
Click to collapse
Flash your recovery again through odin..
Then reflash your galaxian soup..
If not success, use odin and flash stock rom..
Dont forget backup your file from sdcard just in case if you need reset factory..
suwandiapr said:
Flash your recovery again through odin..
Then reflash your galaxian soup..
If not success, use odin and flash stock rom..
Dont forget backup your file from sdcard just in case if you need reset factory..
Click to expand...
Click to collapse
Flashing of CWM didn't help to fix the issue, installing of GalaxianSoup didnt work at all (corrupted ZIP file error...)
Thanks God, reflashing of stock ROM via Odin did work, tablet is up and running. GalaxianSoup is definitely not stable enough yet, I'll stick to the stock rom fora while. Thank you!
whiplash84 said:
Flashing of CWM didn't help to fix the issue, installing of GalaxianSoup didnt work at all (corrupted ZIP file error...)
Thanks God, reflashing of stock ROM via Odin did work, tablet is up and running. GalaxianSoup is definitely not stable enough yet, I'll stick to the stock rom fora while. Thank you!
Click to expand...
Click to collapse
Galaxian Soup is more then stable enough. Bad flashes happen and you just said you had it up and running.
bdfull3r said:
Galaxian Soup is more then stable enough. Bad flashes happen and you just said you had it up and running.
Click to expand...
Click to collapse
To be honest, it is kind of stable, but not enough, hence the beta label. Some further optimizing will be done once the team has ICS source. In my experience, it was stable, but sometimes it would turn off when in fell into Deep Sleep state. Now, the AOKP milestone 5 is giving me issues with the screen rotation. I've experienced both sides, AOSP and AOKP in their latest versions. Obviously there is more room for improvement, but I'm afraid the team is kinda stuck without source. They've done miracles without source though.
Hi,
I flashed my GT-i9000 (Firmware was Gingerbread BUJVY) using CF Root (CF-Root-XW_NEE_JVH-v3.2-CWM3RFS.tar) through ODIN.
All worked fine and I was able to boot into Recovery using the regular Volume Up+Home+Power.
I then proceeded to flash CM10 nightly (23/9/12) (from my external Micro SD card) by wiping data, wiping cache and wiping Dalvik Cache.
I then navigated to the zip file for CM10 and run it. It started ok then qiuckly the phone rebooted and rebooted into a newer version of CWM (6.0.1.4).
From here I cannot do anything at all!! It won't recognise my Micro SD now to even run the installation again
I'm hoping someone may be able to help, I would really appreciate it!
TIA!
zim_zimmer said:
It started ok then qiuckly the phone rebooted and rebooted into a newer version of CWM (6.0.1.4). From here I cannot do anything at all!! It won't recognise my Micro SD now to even run the installation again
Click to expand...
Click to collapse
Do you know what version is your Firmware? is it 2.3.3 or 2.3.6?, IF its 2.3.3 your boot loader needs to be updated to 2.3.6 for you use , If its already 2.3.6, than you should be able to use CWM recovery to reinstall the CM 10 from your SD card. (But by doing this you may lose your IMEI as you should do a progressive upgrade , like from GB 2.3.6>ICS CM9>JB) or flash a semaphore JB kernel
Easiest way out would be for you to use a JVU ROM to recover, safe your EFS, than proceed to CM 9 and than to CM 10...
you can get a rescue kit or JVU+CFRoot from My Android Collections and or a solution from My Android Solutions
Hi there,
I was on Gingerbread 2.3.6 before I ran the above.
I have gotten a bit further than the above. I managed to mount the phone as a USB whilst in CWM and put the CM10 zip file on the actual phone memory. I then wiped data/cache/dalvik and rerun the install. It installed but didn’t reboot itself, so I rebooted manually and then the Cyanogenmod logo started up and it booted into CM10. Looked ok apart from the Home Button didn’t work!!
Do you think I should still run the above??
Rooting this phone and flashing ROMS is more difficult than my Galaxy S3!!
Cheers
zim_zimmer said:
Looked ok apart from the Home Button didn’t work!!
Do you think I should still run the above??
Click to expand...
Click to collapse
Since you are already on CM 10, you need to solve your home button problem, try doing a wipe in recovery, if fails, flash again the CM 10
Hmmm, it didn’t work.
What I’ve done since though is try to flash another ROM.
I’ve flashed the ‘xBean’ ROM with success, however, I did encounter the exact same problem when flashing the ROM as mentioned above
I wiped data/cache/dalvik and run the install for xBean. It stopped after the first install attempt and rebooted itself, however it just brought me back to the CWM screen (although this time different from the CM CWM).
So I wiped data/cache/dalvik, then run the install again. This time it went through the full install but again (like with CM) it didn’t rebooted automatically. I manually rebooted and then the xBean logo came up and booted in.
This time the home button is working, and pretty much everything else is too by the looks of it. So far so good!
I guess my question would be, why does the ‘ghost installs’ keep happening???
It all started when I was on SlimRom 4.2.2 build 6.2. I noticed that my camera was crashing with a message "Unfortunately, Gallery stopped working." I tried to correct this problem by moving to build 6.0 but it didn't work. Then I tried to go to ICS but instead of booting, my phone remained in CWM recovery. I've tried hundreds of things after that but my phone is stuck in recovery. I think the partitions are messed up. I cannot mount /emmc. It says Error mounting /emms whenever I try to mount it. I can connect using adb and I can go into download mode. I've tried flashing stock firmware with partitioning on using odin. But it then boots in stock recovery and cannot access sdcard.
Is there a way to do a completely clean install after creating partitions from scratch and formatting and mounting them from scratch? Is there any other way to recover phone?
Regards,
YRS
Try to reinstall the ROM again or twice.
It should've happened because of the partition and it need to be reflashed to fix.
Darky's Rom Resurrection solved my problem after 2 weeks of struggling Thanks Darky.
Hey guys. I've been using CyanogenMod on my Galaxy S for quite a long time. Few days ago my battery died and phone wouldn't pass the CyanogenMOD logo. I've decided to go back to stock rom and then upgrade to one of the new roms.
So I flashed the stock rom using Odin 3.07, rooted, went to recovery mode and tried to flash: Mackay ROM, Beast ROM ( black and white as well as beastxl), Avatar ROM, Slim Bean, Tsunami, CyanogenMOD but none of the above worked.
It starts the installation and after few seconds phone restarts itself and gets stuck on new boot logo.
The only thing that gets installed is the CWM which won't let me do the factory reset, wipe data, wipe dalvik cache etc. Keeps saying can't mount /data, /cache, /system.
The only time I can do factory reset is when I install stock rom.
I only succeeded installing Franzy ROM once but after reboot gets stuck on boot logo.
Sometimes even the stock ROM is giving me issues like process com.android.phone has stopped unexpectedly (does it for dialer, calculator, market, launcher)
Another weird thing is that even when I go back to stock rom and open up for instance a picture with bright background or web browser I can see transparent battery and CyanogemMod in the middle of the screen even tho phone's not charging and running on stock rom not CyanogenMod.
I think I've tried everything from fixing permissions, flash and re-partition using Odin and 512 pit file.
Even rang my Mom like advised in xda's video, didn't help either
Is there anything else I can try to get my phone in "shape"?
Any suggestions?
AllUsernamesAlreadyInUse said:
Hey guys. I've been using CyanogenMod on my Galaxy S for quite a long time. Few days ago my battery died and phone wouldn't pass the CyanogenMOD logo. I've decided to go back to stock rom and then upgrade to one of the new roms.
So I flashed the stock rom using Odin 3.07, rooted, went to recovery mode and tried to flash: Mackay ROM, Beast ROM ( black and white as well as beastxl), Avatar ROM, Slim Bean, Tsunami, CyanogenMOD but none of the above worked.
It starts the installation and after few seconds phone restarts itself and gets stuck on new boot logo.
The only thing that gets installed is the CWM which won't let me do the factory reset, wipe data, wipe dalvik cache etc. Keeps saying can't mount /data, /cache, /system.
The only time I can do factory reset is when I install stock rom.
I only succeeded installing Franzy ROM once but after reboot gets stuck on boot logo.
Sometimes even the stock ROM is giving me issues like process com.android.phone has stopped unexpectedly (does it for dialer, calculator, market, launcher)
Another weird thing is that even when I go back to stock rom and open up for instance a picture with bright background or web browser I can see transparent battery and CyanogemMod in the middle of the screen even tho phone's not charging and running on stock rom not CyanogenMod.
I think I've tried everything from fixing permissions, flash and re-partition using Odin and 512 pit file.
Even rang my Mom like advised in xda's video, didn't help either
Is there anything else I can try to get my phone in "shape"?
Any suggestions?
Click to expand...
Click to collapse
try to flash stock rom again via odin , root , then flash cm 9 ( to not loose you IMEI ) , then flash CM 10.1 stable from here : http://get.cm/?device=galaxysmtd&type=stable
then install any costum rom you want
The Tox said:
try to flash stock rom again via odin , root , then flash cm 9 ( to not loose you IMEI ) , then flash CM 10.1 stable
then install any costum rom you want
Click to expand...
Click to collapse
Thanks for your reply. Installing CM 9 worked but trying to install CM 10 throws up this error:
assert failed: run_program("tmp/updater.sh") == 0
E: Error in sdcard/cm-10.1.zip
(Status 7)
Installation aborted.
Flash this one :
http://get.cm/get/3Fb
then install this one :
http://get.cm/get/9aJ
Thanks for your help. CM 9.1.0 installs fine, same error for 10.1.2 :/
AllUsernamesAlreadyInUse said:
Thanks for your help. CM 9.1.0 installs fine, same error for 10.1.2 :/
Click to expand...
Click to collapse
did you tried to install other costum roms , like slimbean ?
There MIGHT be a problem with your internal SD card. Slight chance :/
did you tried to install other costum roms , like slimbean ?
Click to expand...
Click to collapse
Yes I did and only Franzys installed successfully but then stopped working after phone reboot.
There MIGHT be a problem with your internal SD card. Slight chance :/
Click to expand...
Click to collapse
I think that might be the case. I get encryption unsuccessful with my sdcard in and CWM doesn't see any files with sdcard out.
I found an article here on forum that explains how to use your external sdcard as the internal one. Will give it a try and see if it works.
For now I don't mind using CM 9.1.
Thanks for your help guys and let me know if you have any other suggestions.