Stock Gingerbread - XPERIA X8 Q&A, Help & Troubleshooting

Hi guys,
I am on stock ROM of Donut on X8.
I would like to update to Gingerbread stock ROM and it to be done through Service Center.
So, is it possible to flash Stock gingerbread on our X8 ?
Actually, my phone is LG Optimus Black, I have knowledge on that.
But X8 is my friend's phone, I read some instructions here to root and flash, seems somewhat headache and risk taking.
So desired to update to Gingerbread with service center.
Suggestions are welcome...:fingers-crossed:

srikanth_kande said:
Hi guys,
I am on stock ROM of Donut on X8.
I would like to update to Gingerbread stock ROM and it to be done through Service Center.
So, is it possible to flash Stock gingerbread on our X8 ?
Actually, my phone is LG Optimus Black, I have knowledge on that.
But X8 is my friend's phone, I read some instructions here to root and flash, seems somewhat headache and risk taking.
So desired to update to Gingerbread with service center.
Suggestions are welcome...:fingers-crossed:
Click to expand...
Click to collapse
Our device, doesn't upgrade to Ginger by official roms (maximum to eclair 2.1.1 & u can. Use Sony's pc companion to upgrade phone to android 2.1.1)
-If you wanna install Ginger anyway, must root the device {install drivers then root by superoneclick application , then install recovery & busybox (cwm or xrecovery - search form cmw installer or busybox installer for x8 )
Download a Ginger rom {ex. GingerDX v029} & place in sdcard
After installing recovery go into it (turn on phone, when you see sony logo keep pressing back button)
Then make nandroid backup-important, if any thing goes wrong you can restore to stock
Press full wipe/factory reset
Select install zip from sdcard, navigate to zip file & install it
Enjoy gingerbread
{Using flashtools app is recommended, it installs recovery, buaybox & roots! By itself. But before using read a guide first }
Sent via Ultimate GB

There is no stock GB update for the X8. Not even Froyo. Your only hope now, if you want to get GB, is to root it, install a recovery and then install a GB ROM.

Try Watch this Video! its super easy to Root.
Youtube:--->>http://www.youtube.com/watch?v=3qYBoT0NOPc (i followed instruction from this video for the first time Root)
all the required tools in the video Decription. watch it carefully and be ready and do it step by step by pause and pause the Video!
Rooting is the only method to make the device SuperFun!
after root you can install any ROM that you preferred and be careful to Flash right ROM with right Kernel otherwise you will brick the X8.
Sorry for my Bad English

95mediatech said:
Try Watch this Video! its super easy to Root.
Youtube:--->>http://www.youtube.com/watch?v=3qYBoT0NOPc (i followed instruction from this video for the first time Root)
all the required tools in the video Decription. watch it carefully and be ready and do it step by step by pause and pause the Video!
Rooting is the only method to make the device SuperFun!
after root you can install any ROM that you preferred and be careful to Flash right ROM with right Kernel otherwise you will brick the X8.
Sorry for my Bad English
Click to expand...
Click to collapse
Who asked 'how to root'
-_- :silly:
see my app sig at your own risk :
sent from my W8 running on armv7 processor problem??

Play or don't play
Hi!
I think if you don't want to play with your phone only download some social apps you can update to gingerbread I think the gingerDx is your rom this work on stock kernel, but if you want to play you have to install the minicm7 by nobodyatall but for this you have to change the kernel. If your phone made after maybe 11W38 you can!t change the kernel.

csnorbika said:
Hi!
I think if you don't want to play with your phone only download some social apps you can update to gingerbread I think the gingerDx is your rom this work on stock kernel, but if you want to play you have to install the minicm7 by nobodyatall but for this you have to change the kernel. If your phone made after maybe 11W38 you can!t change the kernel.
Click to expand...
Click to collapse
Y u post when u don't have full knowledge
It's 11w29 not 11w38
Go first read the stickies then post
see my app sig at your own risk :
sent from my W8 running on armv7 processor problem??

csnorbika said:
Hi!
I think if you don't want to play with your phone only download some social apps you can update to gingerbread I think the gingerDx is your rom this work on stock kernel, but if you want to play you have to install the minicm7 by nobodyatall but for this you have to change the kernel. If your phone made after maybe 11W38 you can!t change the kernel.
Click to expand...
Click to collapse
Stop posting without knowledge and just to make 10 posts.
Sent from my Nexus 7 using xda app-developers app

You should search for x8toolbox it has all the things like rooting, recovery installer etc in one place and is very easy to useuse
Sent from my w8 using xda app-developers app

Related

[Question] Help needed and advice regarding upgrading my firmware please.

Hi everyone, I am brand new sgs owner and first time smart phone user and I upgraded my phones firmware on kies to 2.3.3 / baseband xxjvo / build number gingerbread.xwjvh
I been talking to a few people that have got 2.3.4 and cyanogen mod 7. And I really want to get one of them because my battery life is pathetic on 2.3.3
I have an idea how to do it (I have watched alot of tutorials) but what is confusing me is all the different downloads like cwm and speed mod, kernals, ROMS. All these terms are driving me mad as I dont know if I need to flash this stuff first to upgrade the firmware.
I have been told I may or may not need to root my phone to make it all work because of the current firmware xxjvo 2.3.3?? So what do i do?
Can I just flash a new firmware on via odin? or do i need to flash diff kernals or clockwork mod or speed mod what ever they are to make it work properly.
Im sure its all easy enough once its understood but I cant find basic explanations for all these terms.
I really dont want to mess up my phone but i know I can get this done once i know how.
So could someone that knows please tell me once off, what do I have to do to upgrade from gingerbread 2.3.3 xxjvo to something better like cm7 or 2.3.4.
Do I need to root first? install CWM or speed mod or whatever.
Also what is CWM and speed mod. are the roots?
Sorry for not knowing anything as i said its my first smart phone and I want to get to know how to use it to its full extent
Will greatly appreciate any advice/ help given.
If some ones going to help me could they post the links to the downloads that i will need.
Thanks very much
1.its simple root ur fone first via odin and then flash the voodoo/fugumod lagfix(incase ur experience any lag)
2.Download Rom Mgr premium and download (cyanogen mod7 ,nightlies or watever)
3.Take a backup using Mybackuppro or titanium backup before u flash cm7
4.Go to Rom Mgr Premium and then install the rom of ur choice and also make sure u check GAPPS(if u want gmail, market an all crap)
I m a newbie 2 Galaxy S myself, but i have quite som experience on rooting other fones
darkkid85 said:
1.its simple root ur fone first via odin and then flash the voodoo/fugumod lagfix(incase ur experience any lag)
2.Download Rom Mgr premium and download (cyanogen mod7 ,nightlies or watever)
3.Take a backup using Mybackuppro or titanium backup before u flash cm7
4.Go to Rom Mgr Premium and then install the rom of ur choice and also make sure u check GAPPS(if u want gmail, market an all crap)
I m a newbie 2 Galaxy S myself, but i have quite som experience on rooting other fones
Click to expand...
Click to collapse
Thanks for the reply but what is rom mgr? and must i pay for it if its premium
And what is the download for the correct root I have seen a thread by chainfire with hundreds of root downloads but I dont know what one to use.
Is a ROM the same thing as a firmware?
sgsnoob325 said:
Thanks for the reply but what is rom mgr? and must i pay for it if its premium
And what is the download for the correct root I have seen a thread by chainfire with hundreds of root downloads but I dont know what one to use.
Is a ROM the same thing as a firmware?
Click to expand...
Click to collapse
go to market- download rom mgr( dl Premiu m if u wanna support the dev)
1.From Rom Mgr-Download rom-Dwnload watever u want
Alt way to flash a Rom
1.Downlaod cyanogen mod7 or watever ( from one of the sites) and dump on ur Sd card ( My S does not have a SD ) and once ur in recovery apply update from zip card 2 flash the rom
darkkid85 said:
go to market- download rom mgr( dl Premiu m if u wanna support the dev)
1.From Rom Mgr-Download rom-Dwnload watever u want
Alt way to flash a Rom
1.Downlaod cyanogen mod7 or watever ( from one of the sites) and dump on ur Sd card ( My S does not have a SD ) and once ur in recovery apply update from zip card 2 flash the rom
Click to expand...
Click to collapse
so I dont need to use odin at all??
Do I still need to root the phone before I can flash cm7 from sd card? Do I put it on internal or external sd card? And If so what root do I use for my particular firmware
Anybody? ? Someone must be able to help me
Here are some posts I think will help u find some answers,
Download mode is HOME BUTTON+VOL DOWN+POWER BUTTON
Recovery mode is HOME BUTTON+ VOL UP+POWER BUTTON
1 Android ROM and rooting dictionary: all the terms explained
2 A link explaining how to flash a custom Rom via Odin and their downloads.
3 Deodexed Stock roms
Hope this helps. By the way all these are custom rom lists and not samsung stock firmware.
DonVito2020 said:
Here are some posts I think will help u find some answers,
Download mode is HOME BUTTON+VOL DOWN+POWER BUTTON
Recovery mode is HOME BUTTON+ VOL UP+POWER BUTTON
1 Android ROM and rooting dictionary: all the terms explained
2 A link explaining how to flash a custom Rom via Odin and their downloads.
3 Deodexed Stock roms
Hope this helps. By the way all these are custom rom lists and not samsung stock firmware.
Click to expand...
Click to collapse
Thank you for the reply. Is cm7 a custom Tom?
How safe is it to use a custom rom instead of a Samsung rom.
Can some one tell me is there a particular order I need to follow to upgrade my phones firmware.
Like root then something else followed by the firmware.
Could I upgrade from xxjvo without rooting?
Again sorry all the questions I feel like a dumbass.
Thanks
Double post
Again sorry for being persistent but could someone give be a step by step quire to upgrading my current firmware xxjvo 2.3.3 to something better for battery and better radio signal.
Must the phone be rooted first? Must I install anything else before or after the new firmware
Thanks
Hi, check out samfirmware.com to download stock 2.3.4
I'm on the newest jvr, and my battery is good.
It's also flash manuals there for how to use odin.
thats the safest!
If you want root permission, you can flash cfroot kernel after the rom.
Edit: i'm on the oldest 2.3.4 jvr, looks like it came a new relese today.
Sent from my GT-I9000 using Tapatalk
RobertSand said:
Hi, check out samfirmware.com to download stock 2.3.4
I'm on the newest jvr, and my battery is good.
It's also flash manuals there for how to use odin.
thats the safest!
If you want root permission, you can flash cfroot kernel after the rom.
Edit: i'm on the oldest 2.3.4 jvr, looks like it came a new relese today.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Is a specific ROM needed to run a different firmwares? or vice verse?
If I flashed 2.3.4 does that mean I have a new ROM or new firmware or both?
thanks
Pls do refer my previous post for upgrading to 2.3.4 GB roms (2)
2.3.4 roms are way better for battery. There are some light weight roms with excellent battery life eg SURFACE,Matrux rom, Juwe's Smart Edition(My Pick) etc
You dont need to be rooted to flash a custom rom via ODIN.
CM7 is a custom rom and I would recommend it only if you know what u r doing. Its not very advisable for a noob (imho).
There is insanity cm7 034 with gb boot loaders [ROM] insanity CM 034 [16.08.2011] - Multi DPI But its in heavy dev stage. Pls go through their thread before flashing it.
Here is the EZBOOt link
Install or upgrade at your own risk.
help me to upgrade galaxy s
anybody is there for help me

Question about rooting and install custom rom.

Hello all!
I'm new on this forum. I have questions about Xperia X8. About 1 week i will buy xperia x8(with android 2.1). I want to root it. I have found tutorials on net but i don't really understand, am i going to unlock the bootloader if a root my phone and install custom rom(I'm thinking to install Froyobread)? I don't want to brick my phone so is it safe to root? Also if i have Custom Rom(Froyobread) can I use market to install free apps?
Thanks
P.S Sorry for my english
rooting is easy. just use superoneclick. bootloader unlock is more difficult and dangerous.
for froyobread you wont need a custom kernel. you can us gingerbread roms 2.3 to without flashing a kernel. i have locked bootloader too.
It's safe to root your X8, i recommend this program to do with: http://forum.xda-developers.com/showthread.php?t=803682
It's a very simple and great program. U just need to connect your phone with USB Debugging, and click on root. Thats all
If you want to change the stock kernel (most of roms can run with stock) u will need to download stuff, and make these steps. http://forum.xda-developers.com/showthread.php?t=1254225
Also, make sure, your phone is able to do these processes.
And If you have a costum rom, you can download free apps from market. It's very simple.
To install a costum rom, u need just to read a lot of about it.
Good luck!
If I helped, please click on the THANKS button
magyarlovag
So that means with rooting i won't brick-damage my phone(if a follow instructions carefully)? What 2.3 android Rom to choose for daily using?
Will froyobread run on stock kernel(will i need to unlock bootloader)? Also is there a tool so if a brick(damage) my phone to restore to old state(i have heard that Sony PC Companion is doing that)???
Sorry for stupid questions
Every rom have it's own advantage. I'm using now Alfsv8 kernel, with GDXv22.
It's a very good rom, for almost everything. But nAa's kernel and rom are very popular and great too.
Rooting is very simple with this program, you can't miss it
EDIT: Most of GingerBread roms require the latest nAa kernel, but I prefer Alfs As I mentioned, u must unlock your bootloader to flash a costum kernel.
And yes, you can restore your phone if u accidently brick ur phone. You can make the restore with PCC.
So if i want to install froyobread i will need to change kernel. Is kernel automaticly installing when i browse and choose to install custom rom in xRecovery 0.1. Or is there a special procedure for that?
No, it won't get installed with a rom automatically (it would be too simple )
http://forum.xda-developers.com/showthread.php?t=1254225
Read this thread carefully, and u will know how to do it.
Wait but luisniklas said that i wont need custom kernels for froyo. I also read tutorials for installing custom rom for froyo and i don't find anything for custom kernels. I don't really understand is there a difference between bootloader and custom kernels? If i need to change kernel, i'm not going to risk my phone at all.
Sorry I'm so boring but i really don't understand this things
Update: I found that Froyobread is going to work on stock kernel? Is that mean that i have to skip that hard procedure(changing kernel)?
Some rom will work on stock kernel. I dont know which ones, minicm, gingerdx and the other better roms need to change the kernel. If you don't want to change the kernel, u will need to test the roms by yourself. With stock kernel, maybe u will have wifi, notification bar, bluetooth, camera, fm radio and other bugs. The performance will also won't be fast.
Thanks for explaing that. Now if someone know answer me:
WILL FROYOBREAD WORK ON STOCK KERNEL?
Look.I'll make it as easy as I can get:
First,you root.It's simple, easy and safe. Search for instructions about SuperOneClick.
Then, you install xrecovery.This is necessary in order to install rom.
Then,you choose the rom you want to install.Every rom mentions if it runs on custom or stock kernel, or both.
I suggest since you are new, you should not try to unlock your bootloader yet, you don't want to end up hard bricking your phone.
Go to the rom you want to install, and see if it says stock or custom kernel.And then, you save it to your sd card, you go to xrecovery and install it.
I found this http://forum.xda-developers.com/showthread.php?t=1079463
There is nowhere said that this rom need stock or custom kernel. What will happen if this rom needs custom kernel and i have install on stock?
After you install it, your phone will be stuck in the Sony Ericsson logo. That's what happens.
Portokal said:
I found this http://forum.xda-developers.com/showthread.php?t=1079463
There is nowhere said that this rom need stock or custom kernel. What will happen if this rom needs custom kernel and i have install on stock?
Click to expand...
Click to collapse
This one will works on stock
I want to be safe, so I will make a backup of stock rom in case this custom rom not work. I'll make backup and then if get stuck on sony ericsson logo i wall restore to stock. Anyway thanks guys for explaing me, if I stuck on some steps i will ask you.
Edit: Last stupid question: So if this rom work on stock kernel i won't need to change kernel or unlock bootloader?
Portokal said:
Edit: Last stupid question: So if this rom work on stock kernel i won't need to change kernel or unlock bootloader?
Click to expand...
Click to collapse
Yes, that's what it means.
No, you won't.
But after u learn things about the X8, u should change the kernel too.
install recovery after rooting. use the xrecovery installer. if you cant find it pm me and i will help you. in xrecovery you can backup your current rom with apps etc .
i use GingerXperia(with all xperia apps) V22 on stock kernel. its very nice.
i something gets wrong you mostly can restore your phone with sony ericsson update service.

[Q] Which is the best Gingerbread ROM (W8) for a newbie ?

Hi !
My cousin has asked me to help flash his W8 with 'New Software' to enable installing apps to the memory card ! I'm not an android user (I have Samsung Wave, bada os !) but I know a thing or two about flashing. I figured out that as the default os, android 2.1 doesn't support apps2sd (?), it needs an unofficial ROM (as Sony doesn't have an update coming) with a more recent android like Gingerbread or IcecreamSandwich.
And, I have some questions !
1. Which is best Gingerbread ROM interms of simplicity and reliability
Also, he says he need 'zoom' feature in the camera !
2. Here is the info about his W8
Code:
model e16i
firmware 2.1 update1
baseband m76xx-tsncjolym-53404015
kernal 2.6.29 SEMC
build number 2.1.1.A.0.53
Is there any need to update the baseband ?
3. After reading some tuts, this is the procedure I should follow ?
a. Flash latest firmware using SEUS (is it needed?) and enable debug mode for usb connection
BTW, after flashing latest firmware, do I need to flash the baseband ?
b. Root the phone
c. Install xRecovery or any other restore app as required by the ROM
d. Load the zip file containing the OS to the memory card and boot into xRecovery
e. Use the recover/update option to install the OS
f. Do factory reset
Did I miss something ?
4. Is there any way to install the Walkman player after flashing with the custom ROM ?
5. What about the drivers, I mean audio, display, camera etc ?
Is there any tangible improvements for modded drivers ?
Can you recommend a good set of drivers ?
just follow this guide -
http://www.scribd.com/fullscreen/82885753?access_key=key-2hez0mrgf52fca61khop
It's Jimdem's
x.marX said:
Hi !
My cousin has asked me to help flash his W8 with 'New Software' to enable installing apps to the memory card ! I'm not an android user (I have Samsung Wave, bada os !) but I know a thing or two about flashing. I figured out that as the default os, android 2.1 doesn't support apps2sd (?), it needs an unofficial ROM (as Sony doesn't have an update coming) with a more recent android like Gingerbread or IcecreamSandwich.
And, I have some questions !
1. Which is best Gingerbread ROM interms of simplicity and reliability
Also, he says he need 'zoom' feature in the camera !
2. Here is the info about his W8
Code:
model e16i
firmware 2.1 update1
baseband m76xx-tsncjolym-53404015
kernal 2.6.29 SEMC
build number 2.1.1.A.0.53
Is there any need to update the baseband ?
3. After reading some tuts, this is the procedure I should follow ?
a. Flash latest firmware using SEUS (is it needed?) and enable debug mode for usb connection
BTW, after flashing latest firmware, do I need to flash the baseband ?
b. Root the phone
c. Install xRecovery or any other restore app as required by the ROM
d. Load the zip file containing the OS to the memory card and boot into xRecovery
e. Use the recover/update option to install the OS
f. Do factory reset
Did I miss something ?
4. Is there any way to install the Walkman player after flashing with the custom ROM ?
5. What about the drivers, I mean audio, display, camera etc ?
Is there any tangible improvements for modded drivers ?
Can you recommend a good set of drivers ?
Click to expand...
Click to collapse
Just from my opinion.
1.The Best GingerBread Rom, GingerDx/PrimeHD [for stock kernel/Costum Kernel] & MiniCm7 [ use Costum Kernel ] suggest use GingerDx.
Zoom Feature, Install Zoom FX Camera App from Google Play.
2.If the number 015 in last, I think No need to Flash baseband for update. but not very sure, you can use SEUS Software From computer for Update if you want to.
3.
a]If you already update with SEUS mean your baseband is already up to date.
b]Root you phone [yes] but only if you on Stock Kernel. [Bootloader still Unlocked]
c]Install xRecovery [yes]
d][No] You need make an Nandroid backup, And do fullWipe before install/flashing new ROM.
4.You can find W8 music Apk [Maybe]
5.OfCoz ALOT OF IMPROVEMENT! than The DAMN STOCK ROM
Sweetie no one can tell you what is the best ROM for your phone. We might have the same specs but we will have different experiences and results So the best way is to try and see it for yourself to start with try GDX.
bricked ?
Thanks guys for the replies
I had seen only the 'athulele's post and committed to it (followed the tutorial of 'JimDem' ) and now the phone is stuck at the "Sony Ericsson" logo, can't go to CWM or Freexperia recovery
This is what I've done !
1. Rooted using the X8toolbox
2. Installed Busybox 1.19
3. Installed Freexperia and CWM recovery
4. Created backup using Freexperia
5. Done Factory reset
6. 'Wiped'
7. Loaded "MiniCM7-2.2.0-shakira.zip" ROM zip file to the root of the memory card
8. 'Installed' it using CWM recovery
9. Tapped "yes" to a prompt asking like...full recovery or something (?)
AND now, its stuck at the Sony Ericsson logo
I'm on a slow internet connection so, flashing with Sony PC companion is my best bet ?
Is there any way to solve it without downloading any stuff ?
deedii said:
Sweetie no one can tell you what is the best ROM for your phone. We might have the same specs but we will have different experiences and results So the best way is to try and see it for yourself to start with try GDX.
Click to expand...
Click to collapse
I don't like Android and wont be buying an Android phone...its all about my cousin who don't have any opinion in that matter, I mean ROMs
x.marX said:
Hi !
My cousin has asked me to help flash his W8 with 'New Software' to enable installing apps to the memory card ! I'm not an android user (I have Samsung Wave, bada os !) but I know a thing or two about flashing. I figured out that as the default os, android 2.1 doesn't support apps2sd (?), it needs an unofficial ROM (as Sony doesn't have an update coming) with a more recent android like Gingerbread or IcecreamSandwich.
And, I have some questions !
1. Which is best Gingerbread ROM interms of simplicity and reliability
Also, he says he need 'zoom' feature in the camera !
2. Here is the info about his W8
Code:
model e16i
firmware 2.1 update1
baseband m76xx-tsncjolym-53404015
kernal 2.6.29 SEMC
build number 2.1.1.A.0.53
Is there any need to update the baseband ?
3. After reading some tuts, this is the procedure I should follow ?
a. Flash latest firmware using SEUS (is it needed?) and enable debug mode for usb connection
BTW, after flashing latest firmware, do I need to flash the baseband ?
b. Root the phone
c. Install xRecovery or any other restore app as required by the ROM
d. Load the zip file containing the OS to the memory card and boot into xRecovery
e. Use the recover/update option to install the OS
f. Do factory reset
Did I miss something ?
4. Is there any way to install the Walkman player after flashing with the custom ROM ?
5. What about the drivers, I mean audio, display, camera etc ?
Is there any tangible improvements for modded drivers ?
Can you recommend a good set of drivers ?
Click to expand...
Click to collapse
don't worry buddy.I faced all of ur problems ....
first u should flash a compatible kernel for ur rom ....
download the flash tool and download the compatible kernel for ur Rom ...the kernel will be in x8. android development section ...
then minicm will work..I'm also a w8 user...if any problem quote my words I will help u
---------- Post added at 12:56 PM ---------- Previous post was at 12:53 PM ----------
x.marX said:
Hi !
My cousin has asked me to help flash his W8 with 'New Software' to enable installing apps to the memory card ! I'm not an android user (I have Samsung Wave, bada os !) but I know a thing or two about flashing. I figured out that as the default os, android 2.1 doesn't support apps2sd (?), it needs an unofficial ROM (as Sony doesn't have an update coming) with a more recent android like Gingerbread or IcecreamSandwich.
And, I have some questions !
1. Which is best Gingerbread ROM interms of simplicity and reliability
Also, he says he need 'zoom' feature in the camera !
2. Here is the info about his W8
Code:
model e16i
firmware 2.1 update1
baseband m76xx-tsncjolym-53404015
kernal 2.6.29 SEMC
build number 2.1.1.A.0.53
Is there any need to update the baseband ?
3. After reading some tuts, this is the procedure I should follow ?
a. Flash latest firmware using SEUS (is it needed?) and enable debug mode for usb connection
BTW, after flashing latest firmware, do I need to flash the baseband ?
b. Root the phone
c. Install xRecovery or any other restore app as required by the ROM
d. Load the zip file containing the OS to the memory card and boot into xRecovery
e. Use the recover/update option to install the OS
f. Do factory reset
Did I miss something ?
4. Is there any way to install the Walkman player after flashing with the custom ROM ?
5. What about the drivers, I mean audio, display, camera etc ?
Is there any tangible improvements for modded drivers ?
Can you recommend a good set of drivers ?
Click to expand...
Click to collapse
don't worry buddy.I faced all of ur problems ....
first u should flash a compatible kernel for ur rom ....
download the flash tool and download the compatible kernel for ur Rom ...the kernel will be in x8. android development section ...
then minicm will work..I'm also a w8 user...if any problem quote my words I will help u
x.marX said:
Thanks guys for the replies
I had seen only the 'athulele's post and committed to it (followed the tutorial of 'JimDem' ) and now the phone is stuck at the "Sony Ericsson" logo, can't go to CWM or Freexperia recovery
This is what I've done !
1. Rooted using the X8toolbox
2. Installed Busybox 1.19
3. Installed Freexperia and CWM recovery
4. Created backup using Freexperia
5. Done Factory reset
6. 'Wiped'
7. Loaded "MiniCM7-2.2.0-shakira.zip" ROM zip file to the root of the memory card
8. 'Installed' it using CWM recovery
9. Tapped "yes" to a prompt asking like...full recovery or something (?)
AND now, its stuck at the Sony Ericsson logo
I'm on a slow internet connection so, flashing with Sony PC companion is my best bet ?
Is there any way to solve it without downloading any stuff ?
Click to expand...
Click to collapse
Mate, minicm7 rom use only with costum kernel (nAa 11 kernel). To install costum kernel you need to unlock the bootloader,(read warning unlock bootloader thread before something happen) Thats why you get stuck. I suggest you read the ultimate FAQ by lucastan96, or any sticky thread. Like I mention above. Better flash gingerDX rom which is working with stock and costum kernel.
And for repair download stock rom for x8 or use SEUS.
Sent from my thumb using my eyes
@techmachi
The date stamp is 11W38 => Its bootloader can't be unlocked according to that guy who started the Sticky thread
SO, I guess have to restore with SEUS, right ?
@Shimizux
Thanks man for the heads up !
I didn't look before I pulled the trigger on the MiniCM, my bad
I've downloaded SEUS and gonna repair it !!
x.marX said:
@Shimizux
Thanks man for the heads up !
I didn't look before I pulled the trigger on the MiniCM, my bad
I've downloaded SEUS and gonna repair it !!
Click to expand...
Click to collapse
Yw mate. And yes you can't unlock the bootloader.
Yap,Seus will flash a new fresh stock Rom. Aftar that, start all over again. Flash GingerDX is a good idea. Fullwipe before installing.
Sent from my thumb using my eyes
i use xperiance rom bu=y jimmy thrashmetal, but i recommend GingerDX
wilbso said:
i use xperiance rom bu=y jimmy thrashmetal, but i recommend GingerDX
Click to expand...
Click to collapse
I have downloaded the GingerDX ROM but there is some problem with SEUS as it is downloading very slowly. So, I'm downloading the X8 factory firmware from a Russian site, narod.ru.
The X8 firmware should work with W8 or would've to download the W8 factory ROM ?
Wells hostena
I'm have suspicion that the factory X8 ROM I'm downloading is Russian ! So, is there any option to change the language anywhere ?
I'm asking because I've never used an Android phone that long, not that accustomed to its way it works !!
BTW, is it OK to flash it (GingerDX) with CM recover or should I flash it with xRecover ?
Thank You !!
Hi guys !
I've finally flashed the GingerDX ROM !
Thanks for your help !!
BTW, is there is anything to do to 'jazz it up' before I return the X8 to my cousin ?
Can you recommend me some cool themes and widgets ?
This is what i did on my GingerDx.
Theme i used : Ics theme by a-chep [Already include in Rom]
Bootanimation : Nexus one
Launcher : GoLauncher with Golauncher ICS Theme
ICS-settings : ICS Setting
You want Walkman Music Player Right : Here
Friendcaster For Facebook : Friendcaster
x.marX said:
Hi guys !
I've finally flashed the GingerDX ROM !
Thanks for your help !!
Click to expand...
Click to collapse
No problem always here to help.
x.marX said:
BTW, is there is anything to do to 'jazz it up' before I return the X8 to my cousin ?
Can you recommend me some cool themes and widgets ?
Click to expand...
Click to collapse
Try an ICS theme or honeycomb theme, also, i like xperia active launcher, that works for me,
good luck
Shimizux said:
This is what i did on my GingerDx.
Theme i used : Ics theme by a-chep [Already include in Rom]
Bootanimation : Nexus one
Launcher : GoLauncher with Golauncher ICS Theme
ICS-settings : ICS Setting
You want Walkman Music Player Right : Here
Friendcaster For Facebook : Friendcaster
Click to expand...
Click to collapse
Thanks for the links...BUT, how can I install the Walkman player ?
Also, how can I download apps/themes/widgets for it through the PC ?
And how can I install it !
Gonna google it
Thanks once again !
@wilbso
Thanks... gonna checkout xperia active launcher !
x.marX said:
Thanks for the links...BUT, how can I install the Walkman player ?
Also, how can I download apps/themes/widgets for it through the PC ?
And how can I install it !
Gonna google it
Thanks once again !
Click to expand...
Click to collapse
How to install Walkman Player : Download zip file. Copy/paste to your SD card. go into Xrecovery choose Flash Zip file option, find walkman player zip file you download. and just flash it. Or you can extract the zip file [using Winrar or 7zip] Copy the .apk file from /system/app folder. Copy/Paste to sd card. and install. Or, If you want to install the .apk as system app. copy/paste .apk file into System/app folder [You Must Using RootExplorer Application]. and set App permission. Reboot your phone.
Actually Your cant download app from Google play direct to your pc btw. But You can use this Tool. highly recommend that. Here : Real Apk Leecher
How to Install app. Just Download the .apk, copy/paste to Sd card. and install.
Before That Go to setting/application [tick unknown source]
Permission i mention above.
Long Press apk file and choose Change Permission set Like this.
[x][x][0]
[x][0][0]
[x][0][0]
X : Tick
0 : No
P/s : No Space on apk name if you want to push/install app to system/App.
e.g : Walkman Player.apk [Wrong] WalkmanPlayer.apk [You Good!!]
Hope it helped.
PrimeHD 6.0 x)
Sent from my E15i using xda premium
unlock bl, flash latest nAa kernel and flash latest minicm7 rom... Simple as that.. I have x8 but as much as i have red roms work on w8 as well..

[Q] First Time Rooting Galaxy Note GT-N7000

Okay Guys, I have read thread after thread but I'm still unsure on a few things and would really appreciate some straight answers here:
My fiance has a Samsung Galaxy Note GT-N7000 with the following:
Android Version: 4.0.4
Baseband Version: N7000XXLRK
Kernel Version: 3.0.15-N7000XXLRK-CL811902
Build Number: IMM76D.XXLRK
Now I'm not really sure if we need to root the phone or not, all she really wants is:
1) Custom themes (different unlock sliders ect)
2) More customizing apps like SPB Shell 3D
3) Better Battery Life
From what I understand in order to get noticably longer battery life and UI customization you need custom ROMs with optimized code, but I could be wrong.
I would would also like to be able to Overclock the CPU but then thats just me being a bloke
So heres the Questions:
1) There are now One-Click rooting batch file that reduce the risk of end user mistakes Soft/Hard bricking the Phone
Q1) Is this the part that is unsafe? or is it just flashing custom ROMs which is unsafe?
Q2) Should I use CWM to flash ROMs / Recovery / Wipe as in some threads thats the advice and in others you get DO NOT wipe in recovery
DO NOT flash anything else in recovery
In general, DO NOT use recovery at all
Q3) Is there a way of installing Custom unlock sliders and SPB Shell 3D without having to root the phone? I've heard you need DroidWall to block Wifi and Data so the app doesnt call home, but that this requires the phone to be rooted first?
Im really sorry for all the stupid questions but hopefully somebody can clear things up for me.
Thanks
For installing themes and apps,you need not do any rooting
There are many third party apps to install in play store
For lock screen themes,try go locker,magic locker or milocker
And spb shell can be installed without getting rooted
If you are interested in rooting and flashing custom roms,then first flash a safe kernel(like hydracore) and then flash custom rom through cwm recovery
Dont do any wipe on stock kernel,it may brick your phone
So if you are still interested in rooting,simply flash hydracore kernel through pc odin
Sent from my GT-N7000 using xda app-developers app
A1; wiping from stock recovery if ics is unsafe.
A2; cwm is used to flash roms
A3; spb shell doesn't require root. Droidwall is like a firewall. it works on iptables. so it needs root.
If u root u can customize ur phone to gr8 extent
# message swifted from Note, travelled in the air to gateway and wi-maxed to [email protected] #
treesmoker said:
Okay Guys, I have read thread after thread but I'm still unsure on a few things and would really appreciate some straight answers here:
My fiance has a Samsung Galaxy Note GT-N7000 with the following:
Android Version: 4.0.4
Baseband Version: N7000XXLRK
Kernel Version: 3.0.15-N7000XXLRK-CL811902
Build Number: IMM76D.XXLRK
Now I'm not really sure if we need to root the phone or not, all she really wants is:
1) Custom themes (different unlock sliders ect)
2) More customizing apps like SPB Shell 3D
3) Better Battery Life
From what I understand in order to get noticably longer battery life and UI customization you need custom ROMs with optimized code, but I could be wrong.
I would would also like to be able to Overclock the CPU but then thats just me being a bloke
So heres the Questions:
1) There are now One-Click rooting batch file that reduce the risk of end user mistakes Soft/Hard bricking the Phone
Q1) Is this the part that is unsafe? or is it just flashing custom ROMs which is unsafe?
Q2) Should I use CWM to flash ROMs / Recovery / Wipe as in some threads thats the advice and in others you get DO NOT wipe in recovery
DO NOT flash anything else in recovery
In general, DO NOT use recovery at all
Q3) Is there a way of installing Custom unlock sliders and SPB Shell 3D without having to root the phone? I've heard you need DroidWall to block Wifi and Data so the app doesnt call home, but that this requires the phone to be rooted first?
Im really sorry for all the stupid questions but hopefully somebody can clear things up for me.
Thanks
Click to expand...
Click to collapse
Rooting is no problem. The cause of brick, as mention by others is the wiping under stock kernel.
Just install the philz modded stock rom, u will get a safe stock kernel + root + cwm.
Or if u want just follow dr. Ketan thread on rooting.
Anyway, try not to use one rooting.
I m not sure whether can work or not, but my last reading base on the search i found, it can't be use for ics. U may correct me if i m wrong.
Best if u want simple rooting nd safe kernel, just flash philz.
And yes if u want to flash custom rom u can only do in cwm.
U cannot flash it under stock recovery.
Good luck!
Sent from my GT-N7000 using xda app-developers app
Hi @all,
i'm new here kind of confused too about rooting my N7000....
Could somebody please post or link an easy and safe method for rooting the N7000 with ICS 4.0.4???
Only root is needed, no kernel or rom etc...
Thanks a lot!!
Have a look here:
PhilZ stock kernel rooted / safe kernel and safe recovery
http://forum.xda-developers.com/showthread.php?p=31911656
Can be flashed in stock recovery 3e.
And here is a tutorial how to root/unroot by Dr.Ketan
http://forum.xda-developers.com/showthread.php?p=18978158
Thanks a lot! Dr. Ketan seems to be exact what i was looking for!!! :laugh::good:
For installing themes and apps,you need not do any rooting
There are many third party apps to install in play store
For lock screen themes,try go locker,magic locker or milocker
And spb shell can be installed without getting rooted
If you are interested in rooting and flashing custom roms,then first flash a safe kernel(like hydracore) and then flash custom rom through cwm recovery
Dont do any wipe on stock kernel,it may brick your phone
So if you are still interested in rooting,simply flash hydracore kernel through pc odin
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
First Off.... Thankyou a million! I never knew about the apps for theming in the Play Store, the Mrs is more than happy with her new Pink UI and iLike Lock theme...
I've Only tried Go locker so far but so far so good!!!
So let me get this straight, Wiping your phone using the stock wiping utility provided with the phone on the standard Sumsung supplied Kernal is unsafe???
A1; wiping from stock recovery if ics is unsafe.
A2; cwm is used to flash roms
A3; spb shell doesn't require root. Droidwall is like a firewall. it works on iptables. so it needs root.
If u root u can customize ur phone to gr8 extent
Click to expand...
Click to collapse
So CWM is an alternative recovery method which is used for flashing Custom Roms, simply enough.
Can you just explain what you mean by customizing your phone to a great extent? what else can be done?
Rooting is no problem. The cause of brick, as mention by others is the wiping under stock kernel.
Just install the philz modded stock rom, u will get a safe stock kernel + root + cwm.
Or if u want just follow dr. Ketan thread on rooting.
Anyway, try not to use one rooting.
I m not sure whether can work or not, but my last reading base on the search i found, it can't be use for ics. U may correct me if i m wrong.
Best if u want simple rooting nd safe kernel, just flash philz.
And yes if u want to flash custom rom u can only do in cwm.
U cannot flash it under stock recovery.
Good luck!
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
Okay so find correct Kernal version or Philz, flash using stock recovery method then ill have root and CWM???
With Philz can I still Overclock the CPU?
Have a look here:
PhilZ stock kernel rooted / safe kernel and safe recovery
http://forum.xda-developers.com/show...php?p=31911656
Can be flashed in stock recovery 3e.
And here is a tutorial how to root/unroot by Dr.Ketan
http://forum.xda-developers.com/show...php?p=18978158
Click to expand...
Click to collapse
Thankyou very much for the direct links, very helpful indeed, now if I can find the "thankyou" button you'll all be getting my thanks!
Looks like you dont really need to root. Except for the overclocking (there goes your battery life
Make sure you get the kernel right. After that there isnt much that can go really wrong. Or just wait a while, Jelly Bean (an update for your operating system is) around the corner
What I ment was if I want SPB Shell for free without paying for it, I heard that you can use Droidwall to block its internet contecting so it doesnt get dectected and require payment?
Click to expand...
Click to collapse
Oops... this is not the site for asking these kinda question.. its banned in here.. moderator rules u know :angel:
So let me get this straight, Wiping your phone using the stock wiping utility provided with the phone on the standard Sumsung supplied Kernal is unsafe???
Click to expand...
Click to collapse
Yes N7000 running ICS stock rom with stock kernel .. wiping on them triggers the emmc erase command that corrupts the system. that y philz kernel is a stock kernel with the erase command disabled and u get root as well as CWM v6.0.1.4 latest. :good:
With Philz can I still Overclock the CPU?
Click to expand...
Click to collapse
No Philz is a stock kernel so its just like that, for OC u need a kernel that supports it eg. Hydracore OC.
Can you just explain what you mean by customizing your phone to a great extent? what else can be done?
Click to expand...
Click to collapse
Installing custom ROMs
Installing Mods like battery mod, call recording, full screen caller ID, 15 toggles, transparent notification . infact u can change the look of ur phone if u know how to tinkle with the System apks and frameworks. Mods mainly require u to access the system folder which is only available when u root.
go thru this thread
Good battery life from my N7000 began with the XXLRK. Succeeding builds XXLRQ and XXLRT performed just as well. Therefore do not expect much battery life improvements until your wife changes her phone habits.
I am using Paranoid Utaka now. Even with low cpu settings things are the same with batt life. I believe this has already reached design limits.
Hey guys, sorry its been a long time since my last reply, the Mrs has been so happy using her galaxy note with the new themes/loaders that I haven't needed too ask for more assistance......until now!
To cut a long story short I have a two year old soon who often uses this now to doodle on some of the drawing apps and somehow he removed the apps icon which launces the app tray, and the Mrs was always complaining that she kept getting popups with invites from women on dating websites, (again probably the boy when he's frantically jabbing the screen when he's drawing)
So anyway we wanted to wipe the phone back to its factory settings and I remembered you guys saying it was unsafe to wipe from stock ICS so I've flashed Phiz latest Kernal with touch recovery mode.
I now want to install some custom roms as I'm feeling adventurous however I've been reading lots of conflicting info in the threads on here, some saying flash back to GB rom first or you'll brick your note
And others saying that flashing back to Gb roms are the cause of the bricks!!!
Now I've already made a backup in philz recovery, but do i need to flash back to GB or not in order to instsll paranoid Android?
Also any other rooms you guts can recommend? Are there any stock jelly beans roms yet?
Sent from my GT-N7000 using xda app-developers app
Yes lots of stock leaks jb roms like Xxlsa and xxlsc. No need to go back to gb just make sure you on a safe kernel. That's it
Sent from my GT-N7000 using xda premium
nokiamodeln91 said:
Yes lots of stock leaks jb roms like Xxlsa and xxlsc. No need to go back to gb just make sure you on a safe kernel. That's it
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Cheers man, just finished flashing the ultimate JB rom and its awesome, thanks again to everybody who has helped me out through this whole process.

Best Rom to solve My problems

Hi,
I have since Fev. 2012, a optimus black, but since the beginning I have problems with him.
Before, I was unable to take pictures, because every pictures I took was corrupted.
Since I upgrade to V30b, this problem was solved, but now, sometimes the message: The SD card was removed apears, and I need to reboot the phone. I installed Beyondpod to ear pod casts and all the downloaded pod casts file, after 1 day were corrupted (files with names like:┬▬¶, before the photos were the same names).
This week the phone blinked non stop, I needed remove the batery, and all settings were reserted.
Now I think my battery drains so fast, I had reserted all settings to factory defaults and now the phone is working, bus Podcasts no.
I´m sick of this phone. I wants some custom rom to see if the phone improve.
Can anyone please can help me?
Please give me the information about witch Custom ROM is better. (fast, clean, battery, in all aspects)
Tanks a lot for the help.
Sorry my bad English
Maddmaxx said:
Hi,
I have since Fev. 2012, a optimus black, but since the beginning I have problems with him.
Before, I was unable to take pictures, because every pictures I took was corrupted.
Since I upgrade to V30b, this problem was solved, but now, sometimes the message: The SD card was removed apears, and I need to reboot the phone. I installed Beyondpod to ear pod casts and all the downloaded pod casts file, after 1 day were corrupted (files with names like:┬▬¶, before the photos were the same names).
This week the phone blinked non stop, I needed remove the batery, and all settings were reserted.
Now I think my battery drains so fast, I had reserted all settings to factory defaults and now the phone is working, bus Podcasts no.
I´m sick of this phone. I wants some custom rom to see if the phone improve.
Can anyone please can help me?
Please give me the information about witch Custom ROM is better. (fast, clean, battery, in all aspects)
Tanks a lot for the help.
Sorry my bad English
Click to expand...
Click to collapse
is it rooted ? if yes, then you have lots of option in developer sction, the most stable rom i used recently are Marvel v11 and IZS both ICS based roms. both are great with battery and run pretty smooth.
you can try one of the Marve based stock V30F . i didn't try it yet.
cookiepuppy said:
is it rooted ? if yes, then you have lots of option in developer sction, the most stable rom i used recently are Marvel v11 and IZS both ICS based roms. both are great with battery and run pretty smooth.
you can try one of the Marve based stock V30F . i didn't try it yet.
Click to expand...
Click to collapse
HI,
yes it is rooted.
I will try this rom.
What I need to install this room?
Thanks
Maddmaxx said:
HI,
yes it is rooted.
I will try this rom.
What I need to install this room?
Thanks
Click to expand...
Click to collapse
you need CWM, you can make yourself with ROM COVERTER => http://forum.xda-developers.com/showthread.php?t=1692191&highlight=lg+converter
official firmware .kdz => http://lg-phone-firmware.com/index.php?mod=Lg+Optimus+Black&paese=Tutti&id_mod=1
flash .bin and .fls with SFT => http://forum.xda-developers.com/showthread.php?t=1448803
then when you have CWM, you can install any custom rom.
for your first request : Zeus 7.06 => http://forum.xda-developers.com/showthread.php?t=1454274
Maddmaxx said:
HI,
yes it is rooted.
I will try this rom.
What I need to install this room?
Thanks
Click to expand...
Click to collapse
If it's a rooted v20 (GB) just install ROM Manager from play store and maybe first try a Marvel12b, 11 or even 10 ... where you get a touch 5 CWM recovery with it. Than you probably have the best base you can get to install any ROM.zip from.
Sent from my LG-P970 using xda app-developers app
Guys, thanks a lot for the great help.
I´ll install the ROM and test. (my is a rooted 30b, is possible instal only the CMW and install ROM?)
After de installation done, I´ll post my experience.
Once again thanks a lot for the important help you gave me.
Maddmaxx said:
my is a rooted 30b, is possible instal only the CMW
Click to expand...
Click to collapse
I heard there is one way to install a CWM on v30, but normaly you only brick your phone when you try to get a CWM on v30. Look for unlock U boot.
http://forum.xda-developers.com/showthread.php?t=2160394
yeah, this is a way, but cwm 6 have bug sdcard unmounted, use recovery.img 5.xx.xx on this case.
IMHO, if you have SFT, it's safe to flash with Preinstallation for IZS ROM (SmartFlash): includes Smartflash and latest LG USB drivers =>
http://huexxxtuff.blogspot.com.es/2013/01/izs-rom-links.html
you should have, ics rooted and cwm on one shot. after you can make nandroid backup and test all custom rom you want.
original thread => http://forum.xda-developers.com/showthread.php?t=2115800
Case C: you already are on a new ICS rom without CWM
Quote:
- If you want, use OnlineNandroid to do a nandroid backup of your phone, I'm not responsible of your data losing
- Use Smartflash to completely flash (.bin and .fls) a V20 ROM patched with CWM with V30 baseband (you can
use my PRE_IZS_IMAGE available on my blog)
Click to expand...
Click to collapse
Once again let me thanks the help you gave me.
Now I am confused.
There is any tutorial to help me install the rom?
I am a newbie in this matters. I had a Galaxy tab 7 (p1000), and in that time I did install some roms, but time pass, and now I´m super confused.
I read several thing but, you gave me different solutions and I don´t now how to do.
I think the best rom (following your´s advise), is the MARVEL.
I found this: http://forum.xda-developers.com/showthread.php?t=1554274
And I choose the last: Marvel v G based on Ice Cream Sandwich 4.0.4 v 30d France - deodexed and zipalligned
Following the instructions of the link, I only need do this:
1. You will need a rooted Optimus Black and boot in CWM Recovery or use ROM Manager.
2. Copy the zip file in SDCard.
3. Install zip file.
This is correct?
I need to root the boot? How can I confirm is I have a rooted boot?
SaschaKH gave me this link: http://forum.xda-developers.com/showthread.php?t=2160394
Can I use this instructions to root the boot?
For all operations I need the CWM.Can i install in play store? I found the ClockworkMod (ROM MANAGER) free version. Can I use this version?
Exist also the Rom Manager Premium, for what I need, the free version is OK or I need the pay version?
To finish: What is:
1- SFT?
2 - deodexed and zipalligned?
Thank a lot for all the help.
Sorry for this questions, I want to learn more about this world, and I´m starting. I count with you guys.
Thanks a lot.
Once again sorry for all my questions and my bad English. (I´m Learning English too)
everything you need is here:
http://forum.xda-developers.com/showthread.php?t=1487105
You didn't read it well. It says to root your phone and to boot to CWM. The thing with U-boot is to get rid of the locked bootloader wich gives you an LG Security Error if you install any alternative recovery.
You can follow the instructions given but I didn't try it myself.
What I found easier is to do as NOOBY wrote in his tutorial : flash a V20 patched rom (Gingerbread stock rom rooted and with CWM), like that you'll only have to do the wipes required in CWM and then flash Marvel Rom - which of course you put on your sdcard -.
SFT (= SmartFlashTool, for flashing a firmware easily)
Btw to use that tool you need of course our phone's drivers installed.
Sent from my LG-P970 using Tapatalk 2
Edvin73 said:
everything you need is here:
http://forum.xda-developers.com/showthread.php?t=1487105
Click to expand...
Click to collapse
Wow, great thanks.
Sobralobo said:
You didn't read it well. It says to root your phone and to boot to CWM. The thing with U-boot is to get rid of the locked bootloader wich gives you an LG Security Error if you install any alternative recovery.
You can follow the instructions given but I didn't try it myself.
What I found easier is to do as NOOBY wrote in his tutorial : flash a V20 patched rom (Gingerbread stock rom rooted and with CWM), like that you'll only have to do the wipes required in CWM and then flash Marvel Rom - which of course you put on your sdcard -.
SFT (= SmartFlashTool, for flashing a firmware easily)
Btw to use that tool you need of course our phone's drivers installed.
Sent from my LG-P970 using Tapatalk 2
Click to expand...
Click to collapse
You are rigth.
My English is not the best, and I´ve some difficulty's,
I read all thing you gave me, and now I think I´m ready to brick my phone :laugh::laugh:, correction: to install a new ROM.
Thanks a lot for the great help.
I said I'd brick my phone and it seams i was right.
I install CMW and I choose "backup nandroid", the phone turned off and now appears the LG logo and the information Security Error.
How can I fix it?
I will try this:
http://forum.xda-developers.com/showthread.php?t=1448803
What did you do exactly ?
Sent from my LG-P970 using Tapatalk 2
Sobralobo said:
What did you do exactly ?
Sent from my LG-P970 using Tapatalk 2
Click to expand...
Click to collapse
I had selected the option "backup current rom"
And after, the program installed something, asked me permission to reboot, and appears the problem.
I install again with SFT a V30b rom.
I need to start again, but now I don't know what I did wrong.
Hum... If you installed CWM directly from a stock ICS rom, that's normal that you had that error. ^^
Sent from my LG-P970 using Tapatalk 2
Sobralobo said:
Hum... If you installed CWM directly from a stock ICS rom, that's normal that you had that error. ^^
Sent from my LG-P970 using Tapatalk 2
Click to expand...
Click to collapse
Yes it is what I did.
Is any other way to install CMW?
Even in the tutorial said: "Then you need to install CWM (Clock Work Mod), you can do this e.g. by downloading ROM Manager, install it, open it
and find Install Clockwork Mod Recovery. Hit it, wait some seconds and click LGE optimus Black. Wait again, till the file has been downloaded and installed and your all set Now you can reboot into Recovery, with the second option. It says, what it does: Reboot to recovery"
But I tried also reboot using the option "Reboot to recovery" and the phone reboot and reset with factory defaults.
How can I use other way?
Thanks
In the tutorial it says that for Gingerbread rom.
I don't remember if it is in Ilko or NOOBY's thread but you should use SFT to flash a patched Gingerbread rom. Since it is rooted and with CMW, it may be easier to you for flashing another rom from that.
Sent from my LG-P970 using Tapatalk 2
Sobralobo said:
In the tutorial it says that for Gingerbread rom.
I don't remember if it is in Ilko or NOOBY's thread but you should use SFT to flash a patched Gingerbread rom. Since it is rooted and with CMW, it may be easier to you for flashing another rom from that.
Sent from my LG-P970 using Tapatalk 2
Click to expand...
Click to collapse
Back on track.
I made it. I installed the Marvel G, but my problem still maintains (I use BeyondPod) and in the podcast folder appears a lot of corrupt files), I don´t see any change from stock ROM, but I think this is the objective of this ROM.
But now I am ready and prepared to install all ROMS I Want using the CMW, and install from zip file.
I will continue testing some ROMS.
Witch ROM do you recomend? I don´t need fancy style or other complicated thing, I just need what a stable, low consumption batery, and fast thing.
Once again thanks a lot for the help

Categories

Resources