Related
Guys I have a very serious problem. I'm on Darkkys latest rom...
I took out my battery for 1 hour... put battery back in and the phone did not boot up.
All I got was the screen saver and the phone kept on virbarting...
I tried wiping cache through clock work recovery, resetting to factory settings via clock work.. still nothing..
I just updated phone via odin to latest JPY...the phone goes to black screen and keeps vibrating... It won't boot.
Guys what's wrong with my phone? I am really worried...and I need to use it
I appreciate your help.
Ps. Phone can go into download mode..
http://forum.xda-developers.com/showpost.php?p=10449932&postcount=7
jje
jUsT2eXy said:
Guys I have a very serious problem. I'm on Darkkys latest rom...
I took out my battery for 1 hour... put battery back in and the phone did not boot up.
All I got was the screen saver and the phone kept on virbarting...
I tried wiping cache through clock work recovery, resetting to factory settings via clock work.. still nothing..
I just updated phone via odin to latest JPY...the phone goes to black screen and keeps vibrating... It won't boot.
Guys what's wrong with my phone? I am really worried...and I need to use it
I appreciate your help.
Ps. Phone can go into download mode..
Click to expand...
Click to collapse
Did you use the wipe or non-wipe version?
You'll need to flash older firmware via Odin and start all over again mate.
Hey mate thanks for replying..
someone said to flash XWJM8 ...
I will use your method instead..
would this solve my problem sir?
jUsT2eXy said:
Hey mate thanks for replying..
someone said to flash XWJM8 ...
I will use your method instead..
would this solve my problem sir?
Click to expand...
Click to collapse
The above method given in the link is probably the best way to do it as it flashes stock firmware so that you can start from scratch again
Darkky one.. I used wipe of course...
this didnt work...
odin says FAIL!
"complete (write) operation failed
jUsT2eXy said:
Darkky one.. I used wipe of course...
this didnt work...
odin says FAIL!
"complete (write) operation failed
Click to expand...
Click to collapse
I take it you reset or closed and re-opened Odin?
Are you sure you have the correct PDA / CODE / MODEM / CSC files? and are you using the 512 .pit?
I have no idea...
Can you link me to download that has all the files I need..
I have odin etc
Edit:
The guys says this Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
he is using "I9000XXJPU-REV03-PDA-low-CL747761.tar.md5" twice... is this correct? what about modem file thats included?
I followed instructions and it fails
jUsT2eXy said:
I have no idea...
Can you link me to download that has all the files I need..
I have odin etc
Edit:
The guys says this Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
he is using "I9000XXJPU-REV03-PDA-low-CL747761.tar.md5" twice... is this correct? what about modem file thats included?
I followed instructions and it fails
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=846913
Look here first for the firmware and instructions. If you still have problems PM me later, I'll be back on about 9pm
I am trying it again...as we speak...
On another note how do I flash XWJM8 as many people have had success with this?
I only have 2 files in the folder:
CODE_I9000XWJM8.tar.md5
MODEM_I9000XXJM4.tar.md5
Where is CSC and how do I flash this in odin... what goes where?
thank you so much for your help I really appreciate it
XXJPU failed again... if you could answer the post above this I can try other rom thanks
XWJM8 worked.
Guys
I installed CM 7 successfully on my SGS using instructions here
http://www.galaxyroot.com/rom-cyanogenmod-7-for-galaxy-s-non-official/
It installed perfectly but i m not having signal. So i flashed back original JPY using ODin but phone is stuck on galaxy logo. Please advice on how to revert to original ROM?
Thanks
did you use PIT and check REPARTITION when you flashed back to JPY ??
azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
No as i have one file only JPY_JPY_JPY.tar
azzledazzle said:
did you use PIT and check REPARTITION when you flashed back to JPY ??
Click to expand...
Click to collapse
As per Odin tutorial i select Pit and repartition only when i have 3 files. Can you please advice where can i get 3 files as i have one file only from samfirmware?
My I9000 is international and factory unlocked....
right well were gunna need a 3 file firmware in order to use PIT. bear with me whilst i have a look for one.
probably samfirmare.com ?
yeah just been looking on there they all seem to be 1 file
Yes samfirmware.com has 1 files only.
Are you sure if i flash with 3 files and select repartition then it will solve my problem?
install another firmware like jpjpa with 3 files and then flash xxjpy on it
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Will kies be of any help if i put phone in download mode and attach it with kies?
well im looking at a site that says do re partition with 1 file but its not recommended. http://androidadvices.com/update-samsung-galaxy-s-gt-i9000-to-froyo-xxjpy-2-2-1/
re partition should fix the problem,
zeeshee said:
Will this work?
http://forum.xda-developers.com/showthread.php?t=865701
How to extract this exe file after downloading it?
Click to expand...
Click to collapse
WOOHOO !!!! you found it lol been searching for that with no luck. if XDA says it will work.... it will work lol i have faith in XDA
How to get three files as it is only 1 exe file?
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
azzledazzle said:
exe ?? thats weird. what happens when u run it.
it will probably just be 1 file like most firmwares. but if its on there saying its good to flash with pit then do it. have you read thru the comments ??
Click to expand...
Click to collapse
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
zeeshee said:
Check the link in my last post. If you click on download it is downloading an exe file....
GT-I9000_I9000XXJPU_I9000XXJPU_CODE-MODEM_OSP-MID.exe
I need i need to extract it or rename it to zip to get 3 files????
Click to expand...
Click to collapse
i dont know try renaming it. im downloading it myself now so i can see whats going on
ok its self ecxtrating file..
it gave me following 2 files only
CODE_I9000XXJPU.tar.md5
MODEM_I9000XXJPU.tar.md5
Are these phone and CSC for oDin? What about PDA?
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
azzledazzle said:
http://www.multiupload.com/PUSOOBQ8K5 download that I9000XXJPU with all 3 files flash thru odin with 512 pit
Click to expand...
Click to collapse
Thanks. Odin is updating now.. Hope it works once done.
Hi,
I have bought one i8190N with Not read sim card. There was i8190 firmware and custom flash counter:2. I have flashed stock i8190N and with triangel away deleted counter for zero. Now is in CWM all right, I have always problem with no read sim card. If I try go to service menu by *#197328640# there is up on display ServiceMode, and black screen. Can You help me with this problem?
Thanks
EDIT: Now I see my IMEI in *#06#is Null/Null
Can help pls?
Paul Koty said:
Hi,
I have bought one i8190N with Not read sim card. There was i8190 firmware and custom flash counter:2. I have flashed stock i8190N and with triangel away deleted counter for zero. Now is in CWM all right, I have always problem with no read sim card. If I try go to service menu by *#197328640# there is up on display ServiceMode, and black screen. Can You help me with this problem?
Thanks
EDIT: Now I see my IMEI in *#06#is Null/Null
Click to expand...
Click to collapse
Hmm that's not good your efs folder is corrupted or deleted :/
Paul Koty said:
Hi,
I have bought one i8190N with Not read sim card. There was i8190 firmware and custom flash counter:2. I have flashed stock i8190N and with triangel away deleted counter for zero. Now is in CWM all right, I have always problem with no read sim card. If I try go to service menu by *#197328640# there is up on display ServiceMode, and black screen. Can You help me with this problem?
Thanks
EDIT: Now I see my IMEI in *#06#is Null/Null
Click to expand...
Click to collapse
Not much you can do to fix it yourself without a backup of your EFS, sadly. If its recently bought (still within warranty period), you might try flashing stock firmware via Odin followed by resetting the flash counter using (for both) the Unified Android Toolkit (from SkipSoft):
Code:
h ttp://skipsoft.net/?wpdmpro=wpdmpro&download=28
and then send the device back for warranty.
Your stock firmware info is:
Model: GT-I8190N
Model name: GALAXY S III mini
Country: Czech Republic (O2C)
Version: Android 4.1.2
Changelist: 1281031
Build date: Thu, 04 Jul 2013 04:59:27 +0000
Product Code: O2C
PDA: I8190NXXAMG1
CSC: I8190NO2CAME1
MODEM: I8190NXXAMG1
and can be found and downloaded here:
Code:
h ttp://sammobile.com/firmwares/3/?download=20962
ImproAptoVictum said:
Not much you can do to fix it yourself without a backup of your EFS, sadly. If its recently bought (still within warranty period), you might try flashing stock firmware via Odin followed by resetting the flash counter using (for both) the Unified Android Toolkit (from SkipSoft):
Code:
h ttp://skipsoft.net/?wpdmpro=wpdmpro&download=28
and then send the device back for warranty.
Your stock firmware info is:
Model: GT-I8190N
Model name: GALAXY S III mini
Country: Czech Republic (O2C)
Version: Android 4.1.2
Changelist: 1281031
Build date: Thu, 04 Jul 2013 04:59:27 +0000
Product Code: O2C
PDA: I8190NXXAMG1
CSC: I8190NO2CAME1
MODEM: I8190NXXAMG1
and can be found and downloaded here:
Code:
h ttp://sammobile.com/firmwares/3/?download=20962
Click to expand...
Click to collapse
Tryed, not help, varranty is gone, displchenged, semms be not original
I want try flash multiple firmware with csc, boot, pda, pit files but I cant find. all was on not exist Hotfile.com
Paul Koty said:
Tryed, not help, varranty is gone, displchenged, semms be not original
I want try flash multiple firmware with csc, boot, pda, pit files but I cant find. all was on not exist Hotfile.com
Click to expand...
Click to collapse
Try [GUIDE] Recover your IMEI in 9 steps.
ImproAptoVictum said:
Try [GUIDE] Recover your IMEI in 9 steps.
Click to expand...
Click to collapse
Thanks for post guide. I tested it. But after finish I have problem now with always on display this
Paul Koty said:
Thanks for post guide. I tested it. But after finish I have problem now with always on display this
Click to expand...
Click to collapse
I see, do you get your IMEI code when you dial *#06#? (dont post your IMEI code!)
ImproAptoVictum said:
I see, do you get your IMEI code when you dial *#06#? (dont post your IMEI code!)
Click to expand...
Click to collapse
I see always my imei is null/null
Paul Koty said:
I see always my imei is null/null
Click to expand...
Click to collapse
Your baseband is still showing as "unknown", try flashing stock rom (this one) with Odin, but be cautious if youre not 100% sure how to.
ImproAptoVictum said:
Your baseband is still showing as "unknown", try flashing stock rom (this one) with Odin, but be cautious if youre not 100% sure how to.
Click to expand...
Click to collapse
Yes. Odin 3.04 unrar package from Your link by PDA and flash
Paul Koty said:
Yes. Odin 3.04 unrar package from Your link by PDA and flash
Click to expand...
Click to collapse
Usb debugging enabled in settings, boot into recovery mode (hold power + volume up + home button) and wipe data / factory reset, boot into download mode (hold power + volume down + home button) confirm with volume up, flash stock rom with Odin as PDA, making sure only "Auto Reboot" and "F.Reset Time" are ticked/selected.
ImproAptoVictum said:
Usb debugging enabled in settings, boot into recovery mode (hold power + volume up + home button) and wipe data / factory reset, boot into download mode (hold power + volume down + home button) confirm with volume up, flash stock rom with Odin as PDA, making sure only "Auto Reboot" and "F.Reset Time" are ticked/selected.
Click to expand...
Click to collapse
Ok. I have small problem with custom recovery. There whan I want wipe data, there is for choose just No No No. Ther is not Yes for choose
Edit, I have flashed stock recovery yet. Now I can wipe data
Edit2: Now I use S3 Mini toolkit for flash stock ROM..
Paul Koty said:
Ok. I have small problem with custom recovery. There whan I want wipe data, there is for choose just No No No. Ther is not Yes for choose
Click to expand...
Click to collapse
There should be a YES by scrolling down a few lines.
ImproAptoVictum said:
There should be a YES by scrolling down a few lines.
Click to expand...
Click to collapse
now is done. I waiting for finish flashing...
Paul Koty said:
now is done. I waiting for finish flashing...
Click to expand...
Click to collapse
Note: Once Odin finishes flashing, the phone might boot into recovery mode (since you have custom recovery), in this case you might be aksed to update a package, where if you agree and press YES stock recovery will be installed, if you chose NO you will keep your custom recovery.
I tryed, can´t actualization software. I don´t know why- :crying:
Paul Koty said:
I tryed, can´t actualization software. I don´t know why- :crying:
Click to expand...
Click to collapse
What went wrong?
ImproAptoVictum said:
What went wrong?
Click to expand...
Click to collapse
I dont know. Just if I want upgrade by phone, phone tell me Can´t upgrade.... I don´t know why
Paul Koty said:
I dont know. Just if I want upgrade by phone, phone tell me Can´t upgrade.... I don´t know why
Click to expand...
Click to collapse
Can you make a photo from your phones display? so that we know whats the problem
I have got three files boot.emmc.win , and data also system but I dont know where to put them in the odin software could someone tell me please
Thanks Curtis.
dragoncurt said:
I have got three files boot.emmc.win , and data also system but I dont know where to put them in the odin software could someone tell me please
Thanks Curtis.
Click to expand...
Click to collapse
Why don't you just go to www.sammobile.com and download a complete stock firmware then flash it through ODIN in the PDA section
Thanks and I restored it with twrp .
Guys,
I need an urgent help. Here is my Story..
Using 9208 Note 5 model. After trying different custom roms i tried to flash stock firmware using Odin. Did everything correctly. Unfortunately i checked Nand Erase all option too. The result is my Note 5 stuck at Samsung DimDim logo. For almost 1 hour. Tried reflash several times but no luck..
So i flashed twrp and wipe data and factory reset and reboot. Its works. But problem with voLTE. No voLTE working. I know flashing JIO voLTE fix will solve this but i need a solution for this Odin. I dont want to flash voLTE fix.
Can someone help me pls.. How to bypass that Samsung logo without flashing Twrp.. ?
Rajeev said:
Guys,
I need an urgent help. Here is my Story..
Using 9208 Note 5 model. After trying different custom roms i tried to flash stock firmware using Odin. Did everything correctly. Unfortunately i checked Nand Erase all option too. The result is my Note 5 stuck at Samsung DimDim logo. For almost 1 hour. Tried reflash several times but no luck..
So i flashed twrp and wipe data and factory reset and reboot. Its works. But problem with voLTE. No voLTE working. I know flashing JIO voLTE fix will solve this but i need a solution for this Odin. I dont want to flash voLTE fix.
Can someone help me pls.. How to bypass that Samsung logo without flashing Twrp.. ?
Click to expand...
Click to collapse
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.
MrMike2182 said:
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.
Click to expand...
Click to collapse
Thanks bro. I found mine. So there is option to choose PIT in Odin ?
@MrMike2182
Thanks alot for saving me. Now everything works perfect. Thanks again..
Rajeev said:
Thanks bro. I found mine. So there is option to choose PIT in Odin ?
@MrMike2182
Thanks alot for saving me. Now everything works perfect. Thanks again..
Click to expand...
Click to collapse
It should be in the options tab.
MrMike2182 said:
It should be in the options tab.
Click to expand...
Click to collapse
Yea i fixed it bro. Thanks bro
How did you get your partitions back?
dallen5 said:
How did you get your partitions back?
Click to expand...
Click to collapse
That's what the PIT file does.
dallen5 said:
How did you get your partitions back?
Click to expand...
Click to collapse
Download PIT file for ur exact model number from Samsung website and flash it via ODI with Firmware.
MrMike2182 said:
Well that's because you erased everything including your partitions so now you need to find the .PIT file for your exact model and select it in odin while flashing the firmware again.
Click to expand...
Click to collapse
My S7 edge stuck in bootloop sometimes No Command and Fail to open recovery_cause (No such file or directory) after Android 8.0 update, i do the every solution provided on the internet but its not done. After watch your thread i understand what is happening with my phone and i want to do the Nand Erase & Re-Partition for the same.
please help me to find the .pit file for erase nand and re partition.
Your support will save my phone.
Millions of thanks.
Amolxp said:
My S7 edge stuck in bootloop sometimes No Command and Fail to open recovery_cause (No such file or directory) after Android 8.0 update, i do the every solution provided on the internet but its not done. After watch your thread i understand what is happening with my phone and i want to do the Nand Erase & Re-Partition for the same.
please help me to find the .pit file for erase nand and re partition.
Your support will save my phone.
Millions of thanks.
Click to expand...
Click to collapse
I need to know the firmware version that you were on before this problem started.. The PIT file is always inside of the firmware you download all you need to is unzip it from within the .zip..
MrMike2182 said:
I need to know the firmware version that you were on before this problem started.. The PIT file is always inside of the firmware you download all you need to is unzip it from within the .zip..
Click to expand...
Click to collapse
Thanks for your kind response, after update of the firmware current version is G935FXXS4ESC6 and before update G935FXXS3ERJ2 and i forgot the previous version of Android 7.0. Can downgrade of Android version will fix the same, if yes please let me know how to downgrade the android version.
Thanks you so much
Amolxp said:
Thanks for your kind response, after update of the firmware current version is G935FXXS4ESC6 and before update G935FXXS3ERJ2 and i forgot the previous version of Android 7.0. Can downgrade of Android version will fix the same, if yes please let me know how to downgrade the android version.
Thanks you so much
Click to expand...
Click to collapse
You can only downgrade if you have firmware that's bootloader version 4 because you're currently on bootloader version 4 and you cannot go back down to bootloader version 3 or earlier because that's been blocked by Sammy.. If you need the PIT file it's inside of the firmware that you downloaded you just need to extract it from the file. If you have the firmware G935FXXS4ESC6 then unzip it and then unzip them again and you'll find the PIT file in there.. It's usually inside of the CSC .tar file.
MrMike2182 said:
You can only downgrade if you have firmware that's bootloader version 4 because you're currently on bootloader version 4 and you cannot go back down to bootloader version 3 or earlier because that's been blocked by Sammy.. If you need the PIT file it's inside of the firmware that you downloaded you just need to extract it from the file. If you have the firmware G935FXXS4ESC6 then unzip it and then unzip them again and you'll find the PIT file in there.. It's usually inside of the CSC .tar file.
Click to expand...
Click to collapse
Thanks for your kind support, as per your suggestion after unzip the csc file i found the pit file . Now should i select Nand Erase & Re-Partition options after inserting the pit file. Is it safe to select these options?
I have flash so many time with same firmware, flashing was ok but still i'm facing same problem.
Millions of Thanks
Amolxp said:
Thanks for your kind support, as per your suggestion after unzip the csc file i found the pit file . Now should i select Nand Erase & Re-Partition options after inserting the pit file. Is it safe to select these options?
I have flash so many time with same firmware, flashing was ok but still i'm facing same problem.
Millions of Thanks
Click to expand...
Click to collapse
You can do that yes and if that doesn't fix your problem then there must be something wrong with the phone itself. For your information though you're asking for help in the Galaxy Note 5 thread but you're on a Galaxy S7 Edge.. I do think a moderator might end up moving this to the correct place.