Got a fake Flipcover? - Galaxy Note II Accessories

Hey
I am just about to get a Note II, so I already bought accesories for it.
Today the "original" flipcover shipped.
So it kinda irritated me when the box was all in chinese but didn't really care for it until I checked the quality of the cover.
So see yourself for the build quality of this one, sharp and "dirty cut" edges, not really smooth, kinda grungy all over.
The typography is sometimes not even filled correctly, so you can see white spots within the letters (as if there was not enough color used to print the typo).
So anyone having the original, could check if this one is fake, as I don't really believe in it being just a "chinese original".
Such crappy build quality from an original Samsung accessory which usually retails at 34,99€ at Samsung? I don't think so...
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

It looks real to me. I dont know for sure though.
Verstuurd van mijn GT-N7100 met Tapatalk

Post # 500. YAY me!
The lettering and earpiece look terrible to me in your pictures, like its been used or chewed on
It seems as though the NFC antenna has been removed and replaced before since you can see the creases in the top right corner of the antenna. Also, the plastic molding where the flap on the left side connects to the battery door is different... similar, but different. It may be a different batch and/or a returned product (I see tons of use blemishes), but I say it's a good knock off.
The four flip covers I own all came in perfect condition with perfectly cut earpiece and perfect lettering. They also had the same exact mold lines on the inside of the battery door.
Here you can see the NFC antenna looks different and has a smooth surface, not wavy or bumpy like in your picture, and you can see the plastic mold lines are different then yours where the cover connects to the door.
Here you can see that the ear cutout is precise and the lettering isn't faded at all.
More pictures

How much did you buy it for?
Sent from the Rabbit Hole

Nayb said:
Hey
I am just about to get a Note II, so I already bought accesories for it.
Today the "original" flipcover shipped.
So it kinda irritated me when the box was all in chinese but didn't really care for it until I checked the quality of the cover.
So see yourself for the build quality of this one, sharp and "dirty cut" edges, not really smooth, kinda grungy all over.
The typography is sometimes not even filled correctly, so you can see white spots within the letters (as if there was not enough color used to print the typo).
So anyone having the original, could check if this one is fake, as I don't really believe in it being just a "chinese original".
Such crappy build quality from an original Samsung accessory which usually retails at 34,99€ at Samsung? I don't think so...
View attachment 1652823
View attachment 1652824
View attachment 1652825
View attachment 1652826
View attachment 1652833
View attachment 1652834
View attachment 1652835
Click to expand...
Click to collapse
From my understanding thats the packaging fakes come in.
Sent from my SCH-I605 using Tapatalk 2

Unfortunately I have to agree with Randpost. It's definitely fake. I have the OEM white cover direct from Samsungs website and mine looks exactly like randposts with a weaves pattern in the material and the NFC antenna isn't like your picture. It's a good knockoff though. How much did you pay?

AFAngryWarrior said:
Unfortunately I have to agree with Randpost. It's definitely fake. I have the OEM white cover direct from Samsungs website and mine looks exactly like randposts with a weaves pattern in the material and the NFC antenna isn't like your picture. It's a good knockoff though. How much did you pay?
Click to expand...
Click to collapse
I paid 17€ for it, has been advertised as "original".
So I sent a complaint to the seller and have been refunded all my money, so basically he even offered for me to go to a retail store and send him the invoice, so he will pay the retail price since he said he offered it as original.
But the fake flipcover is still for sell as original, so I don't know if he just tried to satisfy me because he's afraid I could report this to eBay.
But now I ordered an original one directly from amazon for most likeley the same price, but with amazon I am on the safe side.
I don't know what to do with the fake cover tho, since the seller told me to send it back, so I either report it to eBay or send it back to him.
As my Note II has been shipped today, I hope I will have it with me on monday, can't wait as I'm using some old samsung E1170 right now, gave away my nexus 4 to my wife :highfive:

It looks like a real one that just didn't get past the inspection line. At least you don't pay $40. If it is a fake it's a great fake. Most fake ones don't have the nfc chip or the indentation for the home button. I have a fake white one and yours looks alot better. I only paid $4 so that's probably why.
Sent from my Amazing Galaxy Note 2!

looking at the photo's it's a fake, just looking at the speaker hole, you see it's fake.

No way that is real cover from Samsung, or a defected one.. The jagged edges alone is the red flag but also look how the letters don't run parallel with the bottom of the cover. My white one looks much better built Imo.
At least the seller is being very respectful and giving you no problems. I would report him to ebay as he/she is selling falsely advertised items.. I wish the "gold"batteries would get yanked off as well.

I got the same case from eBay, only without the NFC contacts, which was my first clue it was fake, but otherwise it was pretty hard to tell. The seller refunded me and said to keep the case. It is amazing how fast Chinese counterfeits come out for popular products, but I guess it's logical, since most of the originals are also made in China (maybe even in the same factory). Usually there's a way to distinguish, especially if you have an original to compare it to, like a slight difference in font size, missing NFC, etc.

kat3k said:
I got the same case from eBay, only without the NFC contacts, which was my first clue it was fake, but otherwise it was pretty hard to tell. The seller refunded me and said to keep the case. It is amazing how fast Chinese counterfeits come out for popular products, but I guess it's logical, since most of the originals are also made in China (maybe even in the same factory). Usually there's a way to distinguish, especially if you have an original to compare it to, like a slight difference in font size, missing NFC, etc.
Click to expand...
Click to collapse
In most cases yes, you are correct, but for samsung product, optional accessories are usually made in korea, with the exception of batteries and power accessories.
From what I gathered, all original S3 and note 2 flip covers are all made in korea.

FAKE
I can easily tell by the sub-par plastic in the packaging. Samsung uses a much more rigid plastic and the materials inside do nothing for the structure (they are just a facade)

It's a knock-off and not a very good one. Look at the shape of the "v" around the speaker on yours and how different it is from the real one.

I bought a $9 imitation flip case from eBay and wasn't expecting too much. Was pleasantly surprised when it was nicely packaged, fit was perfect and the feel and material was very good. On closer inspection, the A in the logo is not as sharp as the original and the plastic is slightly thicker than the original as well.
I've used it now for more than a week and it's slightly scuffed though wear but still holding up well. The NFC works well and I'd recommend it.
Have attached pics and comparison with my original back cover, apologies for the low quality.
Sent from my GT-N7100 using xda app-developers app

Knock off flip cases are plenty available here in India. ..they cost 400 rupees (7 $)..... looks and fits okay. .
Packaging and looks are similar
scribbled from my note 2 (N7100)

I can get fakes in china for about 3-4 USD

SenK9 said:
I bought a $9 imitation flip case from eBay and wasn't expecting too much. Was pleasantly surprised when it was nicely packaged, fit was perfect and the feel and material was very good. On closer inspection, the A in the logo is not as sharp as the original and the plastic is slightly thicker than the original as well.
I've used it now for more than a week and it's slightly scuffed though wear but still holding up well. The NFC works well and I'd recommend it.
Have attached pics and comparison with my original back cover, apologies for the low quality.
Sent from my GT-N7100 using xda app-developers app
Click to expand...
Click to collapse
Nice fake. Do you have a link to the seller?
Sent from my SGH-T889 using xda premium

jlczl said:
Nice fake. Do you have a link to the seller?
Sent from my SGH-T889 using xda premium
Click to expand...
Click to collapse
It's ended now, but here's something similar: http://www.ebay.com.au/itm/200859431390

Related

Tuff-Luv Leather Case for Dell *NEW*

cant post links, but check ebay uk, search for tuff luv dell streak, or even amazon uk, the case looks amazing, anyone tried it? plz post a review...i bought an otterbox, made phone too huge, n sticky to remove from pocket, think leather is the way to go with the streak...any advise will be much appreciated
Nice find, they look a lot like the PDair cases. I'm having this one just for the leather! http://www.amazon.co.uk/Tuff-Luv-Sa...r_1_2?s=gateway&ie=UTF8&qid=1286040721&sr=8-2
mate from ebay the brown leather 1 is a couple quid cheape (because of free delivery)...i would have bought it straight away and reviewed it (the black one, dont like brown, they both genuine leather btw)..but since i bought the otterbox (i hate it!) really cant afford to throw anymore money on something i might not like lol, so someone else plz take the plunge and post a review, wanna see how thick the phone gets, hope not too much, and does the magnet (if any) mess around with gps or compass thing? pics of your dell in the case would be amazing, cheers
Looking at the images on the Amazon link there, it looks like they've missed out putting cut outs for the proximity sensor (other side of earpiece from front camera).
That's going to cause problems so I wouldn't recommend this case until they fix the design...
damn i knew i should have waited for a review, the buy it now button on ebay was too tempting...i clicked ...oh well i guess il have to do without the proximity sensor thing or get out the scissors n try cutting it
Photopuppet said:
Looking at the images on the Amazon link there, it looks like they've missed out putting cut outs for the proximity sensor
Click to expand...
Click to collapse
An oversight for sure, but easily fixed, my streak is on a data only contract so the proximity sensor is not something I use.
what does the proximity sensor do? is it the thing that switches off the screen wen phone held to your ear? if its permanently blockd by the case wont the phone screen be permanently switched off? :s
Something like that I think. But there's two of them so possibly some movement is also required.
have you ordered one as well? do post a review with pics if possible, il also post a review when mine arrives but dont have another camera and cant take a pic with the streak in the case using the streak lol, so no pics with my review...i have a good feeling abt this case though, lets hope it doesnt disappoint
Yes, I've ordered the saddleback brown version, actually it will be a race to see which turns up first since I've also got a PDair case on order.
Sent from my Dell Streak using XDA App
thats great, so other people can also know from your experience which of the 2 is better, (m hoping its the tuff-luv 1 lol)
Well my leather Tuff Luv case arrived today and I'm impressed with the quality and finish of it, the stitching is good and the cutouts are nicely rounded off. The Streak fits neatly inside, there's just enough tension to hold it in place which means that anything thicker than a vinyl skin would be too big to fit. I've posted some pictures below. The case came in a self seal plastic bag with some generic Tuff Luv instructions and guarantee, in a padded bag.
As you can see I chose the Saddleback brown version, I prefer the workmanlike style over the shiny poser black although the inside is polished leather the outside is not. The case closure is a pop stud not magnetic
The more observant among you might notice a small design flaw in the first image, for those who use the streak as a phone there needs to be an extra opening below the earpiece for the proximity sensors. My Streak is data only so I don't know how much of a problem that might be.
There's a metal stud/socket thing on the back which might be for a belt clip or m/clip (tuff luvs earphone holder) but nothing came with the case to fit it.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The inside of the flap, double thickness for strength.
Openings for the buttons along the top edge
Aluminium speaker grill and camera opening on the back
I emailed Tuff Luv this morning through amazon about the missing cut out and got this reply just now. Pretty good I'd say.
"Thanks for alerting us of this design flaw! We are looking into
fixing the ones we have in-stock here, so that we may get you a
replacement as fast as possible. Would you prefer to receive a fixed
case in exchange for your current one? You can send your present one
back to us at no charge, after you receive the fixed one, if you
like. Please let us know if you would like us to do this.
Thanks again for your help!
-C.M.Rogers
Design/Development Tuff-Luv"
Nice Case and Fantastic service
Dear simplydata,
Thank you for your message. We have indeed fixed these cases with cutouts so that the proximity sensor is no longer blocked.
kind regards
- i-nique_usa
Click to expand...
Click to collapse
Thay have fixed the problem and Ebay listing picture looks different now. Just order one last Friday. Thanks for the review and pictures.
simplydata said:
Thay have fixed the problem and Ebay listing picture looks different now. Just order one last Friday. Thanks for the review and pictures.
Click to expand...
Click to collapse
Mine just arrived after 7 days. They have indeed fixed the problem. I ordered mine directly from i-nique website and got a discount of 15% using coupon code twitterA145. it's so much better than the premium case from dell, imho.
Don't mean to resurrect an old thread, however, just wanted to see how owners of this case is enjoying it and two, I would like to drill a hole and put a belt clip in it, something like this. Just want to know if anyone sees that there may be an issue with the fit of the phone after doing this.
anybody? I'm also interested in this case with a CLIP
2devnull said:
Don't mean to resurrect an old thread, however, just wanted to see how owners of this case is enjoying it and two, I would like to drill a hole and put a belt clip in it, something like this. Just want to know if anyone sees that there may be an issue with the fit of the phone after doing this.
Click to expand...
Click to collapse
The Monaco Leather case has a clip. It will only hold a naked phone, even a TPU case won't let it close. More Pics
My Tuff Luv case is still going strong and is the only one I use.
To those thinking of belts clips, my advice would be forget it, imo the Streak is too big and too heavy to trust to a belt clip of any kind. Buy trousers with cargo pockets instead

Case Mate case Official

Looks like case mate made official their case for the samsung focus (other than just by the AT&T store: http://www.case-mate.com/Samsung-Focus-Cases/Case-Mate-Samsung-Focus-Pop-Cases.asp
EDIT (on 11-01-2010):
Just received the black version from case-mate. The reason for the case being 30$-ish, it includes a screen protector kit. I can defenitively tell that the black version looks slicker than the red one. But that's a mater of personal taste. I mean it's slicker in a way that it look like it's more *part* of the phone, meaning its less obvious that you have a case on it. Anyway that's my 2 cents
Pretty nice, but 35 bucks??? lol Otterboxes go for that much.
ITDRAGON said:
Pretty nice, but 35 bucks??? lol Otterboxes go for that much.
Click to expand...
Click to collapse
I have the red version (ordered on ebay) and it's really great, not too soft and harder in the back, I don't mind paying that much for a case, when I paid several hundreds for my phone.
I've got a red one on order... What do you think of it? I have seen a video review but it sucks...
jessiethe3rd said:
I've got a red one on order... What do you think of it? I have seen a video review but it sucks...
Click to expand...
Click to collapse
I really like it, it's really great and makes handing the phone better (grip is better).
It does makes the phone a little bit heavier and bulkier, but I mean thats normal it's a case
I can take some shot of it if you want!
35 bucks....
$90 can you say RAPE?
http://cgi.ebay.com/New-Red-Black-C...Accessories&hash=item43a40cab56#ht_3922wt_905
I purchased the red pop case when i bought the phone and it was a nice case. Very sturdy but an extremely tight fit. So tight that when I tried to pry out my phone one day a small platic piece right under the micro usb cutout broke. The phone certainly pops out when you pullllllll it out. Either way iam dissapointed I wasted $35 bucs on that case but very content with my body glove snap case.
On a side note how efffed up is it that otterbox make a case the dell venue, which by the way hasnt had a wide release, and hasnt made one the the focus? Makes no sense...
punkcell said:
$90 can you say RAPE?
http://cgi.ebay.com/New-Red-Black-C...Accessories&hash=item43a40cab56#ht_3922wt_905
Click to expand...
Click to collapse
Wow msrp is 35.. wth lol
http://cgi.ebay.com/Samsung-Focus-Windows-7-i917-POP-Case-Case-Mate-RED-/330502923353?pt=PDA_Accessories&hash=item4cf3826459
This guy is selling them for about 22.00 has 275 of them lol
How do you guys like the way the buttons stick up? Are you hitting them by accident? Does it help in preventing hitting the camera or power button by accident?
I bought the Red case-mate on Cyber Monday when they were 50% off from AT&T site. I couldn't resist taking advantage of this deal and I needed some decent protection for my Focus. Although I kinda like the case, I might get the Otterbox when it comes out . My setup right now is this case with a Zagg InvisibleShield. I use Cat Crap paste lens cleaner to keep the screen clean and slick. Any case you buy is going to be a balance of form, fit, function, and price.
Form - This is a area of taste for most and differs widely between people. In general, I'd say this case provides reasonable protection at a relatively slim design and light weight. It feels good in your hand and is attractive. Not being a big fan of colored cases, the red is actually attractive (can't believe I'm saying that). Had the black one been available at the time, I would have definitely gone with that one. But the red is masculine and I can live with it. Agree with cubanaso about the delicacy of the small plastic strip between microusb port and front of phone (screen). This went under extreme stress when I put the phone in and I thought I was going to break it (most likely because I didn't put it in the best way). Thankfully it flexed but didn't break. My suggestion would be to pay the most attention to this area when installing phone. Because of the shape of the phone, the natural instinct is to put the bottom side in the case first. Might want to try putting the top side in first and flex the bottom instead .
Fit - snug fit and definitely isn't going anywhere. Feels like a part of the phone. I actually removed it to instal microusb card, then put it back it. It is a challenge, but not impossible. Like I stated before, you have to be super sensitive to the case's thin plastic strip near microusb port. Overall fit is excellent if you don't plan on taking it on and off.
Function - I've actually dropped it from about 5 feet and it was fine. No damage to case of phone. I'd say the protection level is above average but not Otterbox Defender level. It is probably comparable to the Otterbox commuter series. Minor scratches to back of phone, but still looks relatively new after a month. As far as the buttons go, the case-mate setup actually works quite well. The protrude just the right amount to where you know where they are without having to look at the phone. I can feel the correct orientation of my phone and upright it without looking at it. Big plus. But they take just enough intentional push to where I have yet to accidentally turn off the phone. Not even once. The execution of the buttons (and the side grip as a whole) is probably the biggest plus of the case-mate Pop! Case. Who knows, if Otterbox takes to long, I just may stick with the Pop! Case. I'm not a huge fan of a Red case (by any manufacturer), but this one is actually a good one and is starting to grow on me.
Price - As of right now, I wouldn't pay retail for this case. There was a time when this was the only decent case imo and it was only offered on AT&T site. This is not the situation anymore. Here is another site where it is discounted:
http://www.mrhit.com/POP_Case_RED_Samsung_Focus_i917_Windows7_Case_Mate_p/mh-22674.htm
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310284312222
Forget $90. Forget $22. How about $10????? Free Shipping too.
Seems like a legit seller.
That's a deal right there.
wildbilll said:
http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=310284312222
Forget $90. Forget $22. How about $10????? Free Shipping too.
Seems like a legit seller.
Click to expand...
Click to collapse
i hope he sells the black ones soon
Got in the $10 red one today by USPS.
Pardon the lousy photos.
What I need now is a leather belt case that will hold it and close fully since it now measures 129mm x 69mm x 15.5mm with this case on it. My original size was 123mm x 65mm x 10mm.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Nice!!! I just got the black one. I love the case
wildbilll said:
Got in the $10 red one today by USPS.
Pardon the lousy photos.
What I need now is a leather belt case that will hold it and close fully since it now measures 129mm x 69mm x 15.5mm with this case on it. My original size was 123mm x 65mm x 10mm.
Click to expand...
Click to collapse
i broke off the thin red strip where the micro usb slot is...this allows you to take the case off and put it back on with ease...case will still retain its tighness on the phone
chizzwhizz said:
i broke off the thin red strip where the micro usb slot is...this allows you to take the case off and put it back on with ease...case will still retain its tighness on the phone
Click to expand...
Click to collapse
In the process of taking a picture of the sd card for another thread here on the focus site under general, I took off the case to get to the memory card.
When I was putting the Case Mate back on, one end of the thin part broke. This is definitely a weak spot in the design.
Did you remove it (the red strip) completely, and if so did you cut away the rubber gasket or leave that?
wildbilll said:
In the process of taking a picture of the sd card for another thread here on the focus site under general, I took off the case to get to the memory card.
When I was putting the Case Mate back on, one end of the thin part broke. This is definitely a weak spot in the design.
Did you remove it (the red strip) completely, and if so did you cut away the rubber gasket or leave that?
Click to expand...
Click to collapse
i left the rubber there. The thin red strip makes it so hard to remove the case but without it, the rubber there can expand for easy removal.
AngelSpirit said:
Looks like case mate made official their case for the samsung focus (other than just by the AT&T store: http://www.case-mate.com/Samsung-Focus-Cases/Case-Mate-Samsung-Focus-Pop-Cases.asp
EDIT (on 11-01-2010):
Just received the black version from case-mate. The reason for the case being 30$-ish, it includes a screen protector kit. I can defenitively tell that the black version looks slicker than the red one. But that's a mater of personal taste. I mean it's slicker in a way that it look like it's more *part* of the phone, meaning its less obvious that you have a case on it. Anyway that's my 2 cents
Click to expand...
Click to collapse
Which shipping option did you choose and how long did it take to get to Canada? Thx.
sabesh said:
Which shipping option did you choose and how long did it take to get to Canada? Thx.
Click to expand...
Click to collapse
just the USPS one (the cheapest), got it within about 5-6 business days (I'm in Montreal)

Caseable Custom Case Review [Pics]

Caseable Nexus 7 Case Review
Ordered: 7/24
Received: 8/2
Previous Cases Owned:
Blurex Ultra Slim Folio [Smart Cover]
Belkin Folio Cover for Kindle Fire [No Smart Cover]
Images:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
The Good:
- Made Entirely from Recycled Materials
- Totally customizable
- Holds case firmly
- Elastic Strap holds firm
- Internal pocket for storage
- Buttons mostly accessible
The Bad:
- Made Entirely from Recycled Materials
- Adds a surprising bit of bulk (far less than the Blurex, but more than the Belkin)
- The Design Process vs. final product (more on that in a bit)
- Not a smart cover
The Unknown:
- Durability
Review:
I love the XDA forums around the time of a device launch. Yeah, you get an influx of short term users and forum complaints, but the place overall reflects the unadulterated joy of geek-fanboy-ism in a primarily positive way. Moreso than most of the internet.
As we all watched accessories roll in, I decided this would be the "pricier" case I decided to take the plunge on in hopes it would be my "final" case. I am an obsessive customizer/tinkerer, so it was a pretty easy decision. I decided on a pretty simple design that I thought would compliment my overall device theme (at least for the time being).
This is largely where my biggest complaint comes in, which I think is demonstrated by the screenshot below:
It is important to note that I chose to have the order altered to incorporate the black strap (as opposed to the white), however the overall base color is simply not similar. I didn't agonize over the design, and used stock background as opposed to a provided image file, so I definitely did not take full advantage of the customization - but still feel the colors don't match up particularly well.
That said, the print is high quality (especially given that all the imagery I provided had a fair degree of transparency to it, I wasn't sure it would turn out the greatest), the sturdy feeling recycled neoprene has a nice worn texture to it, and in general I still think it is an incredibly attractive case.
The fill seems to be some sort of either recycled cardboard, pressboard, or plastic. It does flex easily, but doesn't feel bent easily (if that makes sense). Overall, this is an area where only time will tell, but I'd say I'm leaning on the optimistic side. It certainly does not feel as though it's about to fall apart, and the stitching on the neoprene is absolutely top of the line. Incredibly well done.
The lack of smart cover functionality is a bit disappointing, however, I had no expectation it would have one when I ordered it. There was no mention of it on the site, anywhere, and I did not choose to clarify. I had purchased the Blurex smart case immediately on ordering my N7, and when I ordered this case decided if necessary, I would do a bit of surgery with an exacto knife to extract the magnet. I will update this thread with my success to this end, but it is certainly encouraging to have the pocket sewn inside already, as I'm fairly certain it will be simple to stitch the magnet into this case.
tl;dr aka Final Thoughts:
At $40, this was not necessarily a cheap case, but in my opinion very reasonably priced. Turnaround time was definitely satisfactory, and my interactions with their customer service department were very prompt and courteous. It holds very comfortably in the hand.
While it would be foolish to estimate how it will wear over time, I feel like it's going to hold up just fine for my use.
Looks nice! For $40 that didn't sport a smart cover/magnet option....kinda suXors IMO
But I do like the look and it doesn't look very bulky at all. I'd be on the fence on this one but because of the lack of the smart cover, that would be a pass on my book. But I know some who don't like the smart cover option, this may appeal to them.
kpjimmy said:
Looks nice! For $40 that didn't sport a smart cover/magnet option....kinda suXors IMO
But I do like the look and it doesn't look very bulky at all. I'd be on the fence on this one but because of the lack of the smart cover, that would be a pass on my book. But I know some who don't like the smart cover option, this may appeal to them.
Click to expand...
Click to collapse
In reality, it's not that bulky - I just feel like adding any bulk to sleeker devices like this kind of ruins the form factor - so it's not just this case, I struggle with almost all of them.
The smart cover will likely be a deal breaker for a lot of people. My advice to anyone considering ordering one of these is simply to contact them and see if they have any plans on implementing the magnet in future designs. They replied to my email within 24 hours, were very courteous, and I imagine it's something they more than likely do plan on implementing. I'm just an early adopter
And I don't mind hacking my own together. We've got a sewing machine, fabric, and a magnet already - why not? :laugh:
If you want a smart cover, just download an app to do the job.
Troute said:
If you want a smart cover, just download an app to do the job.
Click to expand...
Click to collapse
True, that's an option, but I prefer the reliability of a hardware solution, particularly when I already have the hardware.
I know someone who used to work at Caseable. I got a free custom Touchpad case (technically iPad case, but it fits the same) because of it. Never used it though. As much as I liked my custom design, it wasn't really a 'case'. Just a book-like cover, and a strap in each corner to secure it. I'd rather have something that snaps onto the back of the device like most cases.
I am waiting for mine to arrive, I thought the corners were rounded? It looks nothing like in the pictures on their site!
Sent from my Nexus 7 using xda app-developers app
Solange82200 said:
I am waiting for mine to arrive, I thought the corners were rounded? It looks nothing like in the pictures on their site!
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
http://www.caseable.com/custom-google-nexus-7-case
Looks pretty close to me?
Yeah it does there... When I ordered mine there were different pictures in that spot, showing a blue and orange one, as well as the pink colorful one I ordered, and those looked narrower across and with more rounded corners, the way it does in the image where you choose the pattern. I still can't wait to get mine though, I'm sure ill still like it (and will add my own magnet of course)
Sent from my Nexus 7 using xda app-developers app
Solange82200 said:
Yeah it does there... When I ordered mine there were different pictures in that spot, showing a blue and orange one, as well as the pink colorful one I ordered, and those looked narrower across and with more rounded corners, the way it does in the image where you choose the pattern. I still can't wait to get mine though, I'm sure ill still like it (and will add my own magnet of course)
Sent from my Nexus 7 using xda app-developers app
Click to expand...
Click to collapse
I think I know the shot you are talking about - maybe was on there around day one?
Definitely a bit different, and way different than the design app makes it look for sure.
On playing with it throughout the day, though, I definitely think I am pretty happy. My gripes are largely superficial to this point.
Sent from my Nexus 7 using xda premium

Has anyone tried this specific "smart cover" case?

I looked around for smart covers on ebay and found the cover below. It doesn't fold around like this case does and in general looks more stable judging by the pictures (they could be wrong though).
Have any of you tried it? I have not found a review of it yet but I figured it might be worth asking.
http://www.ebay.com/itm/Black-Smart...ase-Cover-Google-nexus-7-Tablet-/280999623067
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Good question. I've been thinking about getting this case too. Anyone actually got it?
Looks cool, but it would have to be much more stable than it looks to me.
Sent from my Nexus 7 using Tapatalk 2
chacalau said:
Good question. I've been thinking about getting this case too. Anyone actually got it?
Click to expand...
Click to collapse
Yes I have this case, I tell you its a beautiful case to hold and look at. There are other colour variants available which I got the red one.
Its very sleek, doesn't add much weight or bulk to the device.
The sleep functions works brilliantly, and doesn't lock the device when you fold it over to hold like a book, which some do.
ONE DOWNSIDE!!!! - The stand is very hard to figure out (i have not yet figured how to fold it to make it stand up haha !)
Hope this helps answer your questions.
And I genuinly recommend this case as its ace ! (that rhymes weee)
Wilks3y said:
Yes I have this case, I tell you its a beautiful case to hold and look at. There are other colour variants available which I got the red one.
Click to expand...
Click to collapse
Have you got a link for any of the other colours? The ones I see in multiple colours are the ones with the wrap-around magnetic closure in the back (which I have, I'd like to have one that just lies over the screen for use at home).
formicae said:
Have you got a link for any of the other colours? The ones I see in multiple colours are the ones with the wrap-around magnetic closure in the back (which I have, I'd like to have one that just lies over the screen for use at home).
Click to expand...
Click to collapse
You're right mate, asif
Yeah the coloured variants have a lip that does go round the back, but its not noticeable and surely you want this to keep it nicely closed and secure?
Wilks3y said:
Yeah the coloured variants have a lip that does go round the back, but its not noticeable and surely you want this to keep it nicely closed and secure?
Click to expand...
Click to collapse
I think it's noticeable, especially when I have that extra flap to fold back over when I'm using the N7 in my hand.
I want to keep it closed and secure, sure, when it's in a bag or something. But my N7 spends most of its time on my coffee table or bar; I'd love to have a slim case with just a flap over the screen to keep the dust out. That doesn't cost $30+ like the Poetics or Portenzos of the world.
Wilks3y said:
Yes I have this case, I tell you its a beautiful case to hold and look at. There are other colour variants available which I got the red one.
Its very sleek, doesn't add much weight or bulk to the device.
The sleep functions works brilliantly, and doesn't lock the device when you fold it over to hold like a book, which some do.
ONE DOWNSIDE!!!! - The stand is very hard to figure out (i have not yet figured how to fold it to make it stand up haha !)
Hope this helps answer your questions.
And I genuinly recommend this case as its ace ! (that rhymes weee)
Click to expand...
Click to collapse
So do you have this exact case or not? I've seen the other ones and I'm not interested in them after reading the reviews. That's why I started a new thread about this one. If you do have this one, some pictures would be great.
I went and ordered one of these, but likely won't have it for a couple of weeks since it's coming from China. Will post my impressions when it arrives.
formicae said:
I went and ordered one of these, but likely won't have it for a couple of weeks since it's coming from China. Will post my impressions when it arrives.
Click to expand...
Click to collapse
there's a video review from youtube titled "Nexus 7 - Cheap eBay "Smart Cover" Review"
brickedman said:
there's a video review from youtube titled "Nexus 7 - Cheap eBay "Smart Cover" Review"
Click to expand...
Click to collapse
That's a different case, with the wrap-around flap on the right side. I already have that one.
look, heres the deal, that case may look pretty but any case like that wont stay closed. for it to be closed, there would have to be magnets along the edges like the portfolio. any case maker that says the case will stay closed without magnets on the border is lying.
I own one and its awesome. Buy it.
Sent from my Nexus 7 using XDA Premium HD app
I have got 1, build quality feels nice and it doesn't add much bulk to the device and also looks pretty sweet.
Sent from my Nexus 7 using xda app-developers app
I have to admit, I never really liked these cases... but after seeing that YouTube review online, I'm curious enough to give it a shot.
I'm absolutely in love with this Speck case, but I do have a minor concern with it. I use my Nexus 7 frequently, very frequently, and not only that but I use it for work. I'm continually walking up and down the hall at work going from one problem to another, using my N7 along the way. As a result, I'm concerned I may wear out the clip on the Speck case quite a bit. This only became a thought when I realized the clipping mechanism is significantly easier now than it was when I bought it. Broken in? Maybe. Will it get even softer? Very possible. This case ensures that won't happen since the magnets of course don't have physical contact to wear like that. While the higher stand up position seems a bit easy to topple over, the other one with the N7 (one I'd likely prefer anyway) looks a bit better in terms of stability.
At any rate, ah, I bought one just now - we'll see what happens when it gets here.
Edit - for what it's worth the one I ordered did indeed have the magnetic flap that goes around back to ensure it stays shut. I'm not sure I'd consider one without...
Case arrived today, so far I like it, the cover lies flatter than the eBay case with the extra flap, and it feels slimmer. Only downside so far is that it sometimes puts the tablet to sleep when I fold it back. We'll see if it gets better over time. I'll try to take pictures when I have a chance.
formicae said:
Case arrived today, so far I like it, the cover lies flatter than the eBay case with the extra flap, and it feels slimmer. Only downside so far is that it sometimes puts the tablet to sleep when I fold it back. We'll see if it gets better over time. I'll try to take pictures when I have a chance.
Click to expand...
Click to collapse
maybe slip something to block the magnet on the back? not sure what can maybe help on that front, but maybe a little thickness might be enough.
Side note, anyone have this and the poetic slimline case? I got the first case they had for my uncle, but it's a bit difficult for him to open. I'd get him a portenzo like mine, but it might actually add more bulk than I'd want for him.

[REVIEW] Aluminium Bumper

Today I took receipt of a grey Aluminium Bumper for the GT-N7100 Galaxy Note.
I bought them from eBay for about £14 from a UK seller, there are cheaper ones from China but I thought getting one from the UK would be quicker to get a hold of, in terms of delivery.
This is the first bumper like this I've ever owned, I had heard stories of people scratching their devices whilst installing the phone into these things, but I had no such issue. There wasn't a mark on the protector caused by the installation and, considering the screen protector is going to be much softer than the glass, thus easier to damage, so if there was going to be any damage, you'd see it on that.
On the note of installation, it was quick and easy. The phone sits nicely inside, there isn't any play as such but, when you "try" to move it around you can feel movement, but I think this is something of a good thing, for absorption purposes in case of a fall.
What I was surprised about, was the fact the back of the case sits almost flush with the back of the phone itself, offering no (extra) protection for the camera when you put it backside down, this fortunately is not the case for the front, the case adds about a 2mm edge to the screen, and so does get protection when you place it screen down on a table etc...
You can see that it comes well packaged, perhaps not as well as the Nillkin case I reviewed last month, but better than just being loose in an envelope.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
There are pads on the inside of the case that the phone actually sits on (not on the bare metal itself.)
To use the buttons on the phone, it has it's own raised buttons on the case, they work really well and are quite rigid.
It's very precisely cut, the mic holes are correct and inline.
And the original Samsung cable fits just fine too.
All-in-all I'm quite impressed, I don't think It's worth the £14 I paid, but It's the just one of the cons of wanting it quick, as opposed to waiting for a delivery from China.
Also, to dispel any reports/myths, that it out makes the signal worse, the phone and other internal radios haven't been affected by the case in anyway.
There are plenty of sellers on eBay selling them for you to buy from, but here is the seller I bought mine from http://www.ebay.co.uk/itm/281008440...eName=STRK:MEWNX:IT&_trksid=p3984.m1439.l2649
Update:
Due to the concerns I have about damage to the camera lens that this and, other cases that don't fully surround the phone don't protect against, when placed on a table for example, I have simply cut a piece of a screen protector, from a protector for a phone I no longer own, and placed it over the lens.
This has not affected image quality, or affected the way the auto focus works or the speed off it in anyway. With this in place, I am no longer worried about minor scratches that could be caused by putting the phone down on a desk/table. In my opinion, this is a suitable solution not just for this case, but just to have in general, regardless of what case (if any at all) you choose to use
I really like the looks of this case!
How close is the fit? Does the phone wiggle around at all inside the bumper?
One of the other Ebay listings for this has a video showing installation, for anyone interested: Oops... not enough posts.
You can search Youtube for "Aluminum Bumper Metal Alloy case for SAMSUNG Galaxy Note 2 (GT-N7100) / Note 2 LTE (GT-N7105)"
Roundabouts said:
I really like the looks of this case!
How close is the fit? Does the phone wiggle around at all inside the bumper?
One of the other Ebay listings for this has a video showing installation, for anyone interested: Oops... not enough posts.
You can search Youtube for "Aluminum Bumper Metal Alloy case for SAMSUNG Galaxy Note 2 (GT-N7100) / Note 2 LTE (GT-N7105)"
Click to expand...
Click to collapse
I did mention movement in the review
"The phone sits nicely inside, there isn't any play as such but, when you "try" to move it around you can feel movement, but I think this is something of a good thing, for absorption purposes in case of a fall. "
But to elaborate on it more, it fits tightly and there isn't any movement but, If you try to force movement you can tell that there is a bit of give, probably from the pads compressing. It's nothing bad and is probably good that it happens the way it does.
Ah, my brain skipped over that for some reason, sorry!
I noticed in the pictures and video that the pads don't seem to cover the entire inside. The corners are exposed, and I am worried about the phone contacting the unpadded parts when dropped. Also, it looks like the rear shots of the case show light between the bumper and sides of the phone.
Extra padding isn't hard to add, so I may give this a try.
Roundabouts said:
I read your post, but I wasn't clear on what I meant by wiggle.
I noticed in the pictures and video that the pads don't seem to cover the entire inside. The corners are exposed, and I was worried about the phone contacting the unpadded parts when dropped.
This is something I can easily fix on my own, if there's an issue, so I think I'm going to give this case a try!
Click to expand...
Click to collapse
Ahh, I know what you mean now. It'll be real easy to add some extra padding if needed, you'd just need to get some self adhesive foam and stick it where you want it.
Can you give a quick mention on the sliding cover peice, does it rub the edges of the screen? Someone said somewhere that the screen rubs on the peice that you slide back on to cover the top.
Thanks,
1FstYOTA said:
Can you give a quick mention on the sliding cover peice, does it rub the edges of the screen? Someone said somewhere that the screen rubs on the peice that you slide back on to cover the top.
Thanks,
Click to expand...
Click to collapse
From the first post:
"This is the first bumper like this I've ever owned, I had heard stories of people scratching their devices whilst installing the phone into these things, but I had no such issue. There wasn't a mark on the protector caused by the installation and, considering the screen protector is going to be much softer than the glass, thus easier to damage, so if there was going to be any damage, you'd see it on that."
Sent from my GT-N7100 using Tapatalk 2
Ok, now comes the question, since I'm looking at this and the hard case you reviewed, which do you prefer using as your daily case? Love the look of the aluminium bumper, but the back not being as protective as the front is what makes me dislike it...
Thanks.
sHaHiN786 said:
Ok, now comes the question, since I'm looking at this and the hard case you reviewed, which do you prefer using as your daily case? Love the look of the aluminium bumper, but the back not being as protective as the front is what makes me dislike it...
Thanks.
Click to expand...
Click to collapse
Well, I think I'm actually leaning towards the bumper I have a protector on the screen, and the back plate can be replaced if it gets mega scratched etc... I think the bumper just looks so much cooler than anything I've had before.
I have got a fully covering leather case for full protection when I know I'm going to be somewhere that I could cause some real damage if I dropped it, like when going out walking etc... but day-to-day the bumper is the route "I'd" take.
Sent from my GT-N7100 using Tapatalk 2
RavenY2K3 said:
From the first post:
"This is the first bumper like this I've ever owned, I had heard stories of people scratching their devices whilst installing the phone into these things, but I had no such issue. There wasn't a mark on the protector caused by the installation and, considering the screen protector is going to be much softer than the glass, thus easier to damage, so if there was going to be any damage, you'd see it on that."
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
ugh case of the Monday, well thanks man my should be here anyday now.
Thanks for the review can't wait to get mine.
Due to the concerns I have about damage to the camera lens that this and, other cases that don't fully surround the phone don't protect against, when placed on a table for example, I have simply cut a piece of a screen protector, from a protector for a phone I no longer own, and placed it over the lens.
This has not affected image quality, or affected the way the auto focus works or the speed off it in anyway. With this in place, I am no longer worried about minor scratches that could be caused by putting the phone down on a desk/table. In my opinion, this is a suitable solution not just for this case, but just to have in general, regardless of what case (if any at all) you choose to use
First post updated.
Sent from my GT-N7100 using Tapatalk 2
OMG thanks for the review!! ive been wanting one of these but havent found a good review for it online! you mentioned that this particular case doesnt offer protection for the camera since it is flush with the device. However on amazon i found this one:
http://www.amazon.com/ZuGadgets-Alu...391&sr=8-7&keywords=galaxy+note+2+bumper+case
it looks identical to the case you have, but in the pictures, it shows that the case is elevated slightly from the phone itself. do you think this could be different from the one you have?
thanks!
Good review
but I'm wondering whether this aluminium kind of bumper blocks the GPS signal or not when the phone is used as Navigation. Pls try to use the bumper and turn the GPS on. . Will there be any problem? thanx
There was another review on here regarding a metal bumper and according to him it did not affect the gps but it did affect the nfc..
TraktoR6666 said:
Good review
but I'm wondering whether this aluminium kind of bumper blocks the GPS signal or not when the phone is used as Navigation. Pls try to use the bumper and turn the GPS on. . Will there be any problem? thanx
Click to expand...
Click to collapse
This does not impact GPS/NFC. I have noticed roughly a one bar drop in cell signal but that's it. I've had mine for almost a month and no issues.
fadilkarim said:
OMG thanks for the review!! ive been wanting one of these but havent found a good review for it online! you mentioned that this particular case doesnt offer protection for the camera since it is flush with the device. However on amazon i found this one:
http://www.amazon.com/ZuGadgets-Alu...391&sr=8-7&keywords=galaxy+note+2+bumper+case
it looks identical to the case you have, but in the pictures, it shows that the case is elevated slightly from the phone itself. do you think this could be different from the one you have?
thanks!
Click to expand...
Click to collapse
It's just the camera angle, if I take a picture at the same angle, it will give the same illusion.
And regarding GPS signal, the case "does" affect it. I've been meaning to make a video showing exactly what happens, I'll try and make and upload one tomorrow.
Sent from my GT-N7100 using Tapatalk 2
Anyone find one similar to the element case for iphone and Galaxy S3. I like bumper cases but the idea of a snap together 2 piece one does not seem secure enough to me. The screw together case seems like it would be much better.
I ordered this exact case on Friday. Should be here this week.
Sent from my SPH-L900 using xda app-developers app
RavenY2K3 said:
It's just the camera angle, if I take a picture at the same angle, it will give the same illusion.
And regarding GPS signal, the case "does" affect it. I've been meaning to make a video showing exactly what happens, I'll try and make and upload one tomorrow.
Sent from my GT-N7100 using Tapatalk 2
Click to expand...
Click to collapse
Wow those clever dogs! lol damn im disappointed. and now that u mention it affecting gps signal i think ill get another case. Im glad i stumbled on your review!!
might go for an otterbox... lol
RavenY2K3 said:
And regarding GPS signal, the case "does" affect it.
Click to expand...
Click to collapse
Too bad, otherwise it would be a great bumper case.

Categories

Resources