Hi,
I've searched around and found another topic in wich the user had the same problem, but I couldn't figure out what he did.
http://forum.xda-developers.com/showthread.php?t=1634870
I flashed my phone with the JB official update and it is working fine. But after that I was trying do enable root on my phone, wich requires some recovery mode installed on the phone.
But when I try to access the stock recovery mode, I only get a Samsung Galaxy S Advance logo screen and that's it, it gets stuck.
I can access the Download mode though (The user in the other post I mentioned couldn't).
After trying to access the stock recovery mode I tried to flash the TWRP recovery mode as explained in this topic (http://forum.xda-developers.com/showthread.php?t=1873119), but all I get is the Samsung Galaxy S Advance logo screen again.
Is there a way to flash the stock recovery mode?or a way to flash the Clockwork recovery? I searched a lot and couldn't find any ways of doing thaht.
Thank you.
there is a temporary CWM,check in development section,it needs recovery.
or
have you tried waiting in recovery lets say 1-2 min?
mj111996 said:
there is a temporary CWM,check in development section,it needs recovery.
or
have you tried waiting in recovery lets say 1-2 min?
Click to expand...
Click to collapse
Hi, thanks for answering!
This one? http://forum.xda-developers.com/showthread.php?t=1987313
I've seen it before, but I need to use the stock recovery mode to install it, wich I can't access.
and yes, I gave it up to 5 min to initialize the stock recovery mode and nothing =/
did you try factory reset?
at settings-backup and reset?
or
flash firmware again and try.
mj111996 said:
did you try factory reset?
at settings-backup and reset?
or
flash firmware again and try.
Click to expand...
Click to collapse
Did these things you said and it worked!! Thanks, man!
Related
I bought that phone 3 months ago i changed to CyanogenMod and when i want to change it back to original firmware because it keeps repeating the vodaphone screen every time. GT-S6500T Locked to Australia Vodaphone
You have to wipe data in recovery
xfim said:
You have to wipe data in recovery
Click to expand...
Click to collapse
Thank you very much for your answer but i've got another problem that appears is that i cannot open recovery mode i tried. to give you a specific screen of the problem from the moment that i uninstall cyanogenmod10 and tried to install original firmware that i download it from sammobile.com then the problem appeared. when i am swiching on the phone it loads vodaphone screen and just repating vibrating phone doesn't do anything else.
Recovery combination is vol down+vol up+home+power. Hold until samsung logo
You must install recovery again, wipe data and cache and then flash stock firmware via odin.
djangovu said:
You must install recovery again, wipe data and cache and then flash stock firmware via odin.
Click to expand...
Click to collapse
Thank you for your answer i do need though to install recovery again, but i have no idea where to find recovery can you provide me the links will be very handy
Cheers!
deathsubber said:
Thank you for your answer i do need though to install recovery again, but i have no idea where to find recovery can you provide me the links will be very handy
Cheers!
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=2156194
here you go, you have download link there and download cwm 6.0.3.3
Thank you very much guys for the links. really appreciate. i haven't fixed it up yet but i will soon
deathsubber said:
Thank you very much guys for the links. really appreciate. i haven't fixed it up yet but i will soon
Click to expand...
Click to collapse
complete tutorial here. Flashing back to Stock
Hello,
my Galaxy Note GT-N7000 became unbootable after installing latest Cyanogenmod 10.1 update.
I use it to organize myself and I need it back as fast as possible.
I need your help and googeling was unsuccessful.
I hope it is possible to rescue my phone because I dont have much money to buy another phone.
Thanks a lot!
XXY
TheXXY said:
Hello,
my Galaxy Note GT-N7000 became unbootable after installing latest Cyanogenmod 10.1 update.
I use it to organize myself and I need it back as fast as possible.
I need your help and googeling was unsuccessful.
I hope it is possible to rescue my phone because I dont have much money to buy another phone.
Thanks a lot!
XXY
Click to expand...
Click to collapse
can you access recovery mode (volume up+home+power), or download mode (volume down+power+home button)?
I had the exactly same problem like him. But..
treacherous_hawk said:
can you access recovery mode (volume up+home+power), or download mode (volume down+power+home button)?
Click to expand...
Click to collapse
...But , i could access to Download Mode *(Volume Down+Power+Home) , I couldn't get access to Recovery Mode only *(it turns Black Screen & keep me waiting so long) .
I thought problem solves if I couldn't change another Custom Rom , but i can't even BOOT into recovery mode.
THANKS Brothers for solving here, THanks THanks. (I'm urgent for it too..)
Current Rom I hooking is:
Carbon0825
treacherous_hawk said:
can you access recovery mode (volume up+home+power), or download mode (volume down+power+home button)?
Click to expand...
Click to collapse
Download mode: yes
Recovery mode: no
If i had had access to the Recovery mode i wouldnt have startet this thread...
Im absolutly helpless and i cant find a guide which tells me how to reset my phone only with the download mode...
Thanks for replying!
XXY
TheXXY said:
Download mode: yes
Recovery mode: no
If i had had access to the Recovery mode i wouldnt have startet this thread...
Im absolutly helpless and i cant find a guide which tells me how to reset my phone only with the download mode...
Thanks for replying!
XXY
Click to expand...
Click to collapse
Flash philz kernel (.tar) from pc odin while in download mode (latest version). See if you can get into recovery, if you can, download and put the CM rom+gapps on external sd card, flash without any wipes from recovery or if you did take any nandroid backup you can restore that from philz kernel.
treacherous_hawk said:
Flash philz kernel (.tar) from pc odin while in download mode (latest version). See if you can get into recovery, if you can, download and put the CM rom+gapps on external sd card, flash without any wipes from recovery or if you did take any nandroid backup you can restore that from philz kernel.
Click to expand...
Click to collapse
ok... i read though these threads but i dont know how to install philz kernel...
i tried flashing it with odin but the only thing i noticed was that the binary counter increased...
can you tell me step by step what i have to do?
i know that is awful to do...
if you dont whant to write and tell it me than add me in skype: xxyababx12345
Thanks!
XXY
after you have flashed Philz kernel... power off the device... and try to boot into recovery.
TheXXY said:
ok... i read though these threads but i dont know how to install philz kernel...
i tried flashing it with odin but the only thing i noticed was that the binary counter increased...
can you tell me step by step what i have to do?
i know that is awful to do...
if you dont whant to write and tell it me than add me in skype: xxyababx12345
Thanks!
XXY
Click to expand...
Click to collapse
Why should he write it in private? I bet there are several people (including me) sitting in threads like this waiting for a clear answer from people who know what to do.
TheXXY said:
ok... i read though these threads but i dont know how to install philz kernel...
i tried flashing it with odin but the only thing i noticed was that the binary counter increased...
can you tell me step by step what i have to do?
i know that is awful to do...
if you dont whant to write and tell it me than add me in skype: xxyababx12345
Thanks!
XXY
Click to expand...
Click to collapse
download philz kernel from:
http://forum.xda-developers.com/showthread.php?t=1901191
download the one that says .tar instead of .zip. put the phone into download mode. Open PC odin, connect phone to pc, COM ID should light up in yellow with some number. click on PDA and choose the .tar file and click on start. once it is finished, reboot into recovery and see if it works. You can fix the counter and yellow triangle later with Triangle away application.
treacherous_hawk said:
download philz kernel from:
http://forum.xda-developers.com/showthread.php?t=1901191
download the one that says .tar instead of .zip. put the phone into download mode. Open PC odin, connect phone to pc, COM ID should light up in yellow with some number. click on PDA and choose the .tar file and click on start. once it is finished, reboot into recovery and see if it works. You can fix the counter and yellow triangle later with Triangle away application.
Click to expand...
Click to collapse
Is the Kernel version essential? Since Philz v5.11.2 has several Kernels you can choose from, where as you cannot check which one you have running since the phone does not boot anymore.
correct , you're right!
diwako said:
Why should he write it in private? I bet there are several people (including me) sitting in threads like this waiting for a clear answer from people who know what to do.
Click to expand...
Click to collapse
still waiting for a clear answer to proceed the steps.
Philz Kernel may need a LINK here. maybe URL ?
THanks ALL ! feel that solutions are near now.
as you cannot check, you can download the one for your region, check on sammobile.com/firmwares for which one is for your region and i already gave the link to the philz kernel, i wont post the direct url for the file.
Basically got my phone to boot, CWM is still broken, anyway to work with this?
http://i.imgur.com/LahUi87.png
diwako said:
Basically got my phone to boot, CWM is still broken, anyway to work with this?
http://i.imgur.com/LahUi87.png
Click to expand...
Click to collapse
read from last post here and continue:
http://forum.xda-developers.com/showthread.php?t=2386292&page=27
One problem: i dont know which kernel i have...
and i dont understand this:
http://forum.xda-developers.com/showpost.php?p=31911656&postcount=2
where can i find my kernel id?
Thanks!
XXY
TheXXY said:
One problem: i dont know which kernel i have...
and i dont understand this:
http://forum.xda-developers.com/showpost.php?p=31911656&postcount=2
where can i find my kernel id?
Thanks!
XXY
Click to expand...
Click to collapse
It doesn't matter which kernel you flash, you're just flashing to give you recovery and then you can flash cm and gapps. It won't boot, it's not supposed to.
Sent from my GT-N7000 using XDA Premium 4 mobile app
SpyderTracks said:
It doesn't matter which kernel you flash, you're just flashing to give you recovery and then you can flash cm and gapps. It won't boot, it's not supposed to.
Sent from my GT-N7000 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
ok... i flashed the kernel: PhilZ-cwm6-DDLSC-ODD-5.11.2.tar.md5
and tried to boot into recovery mode.
the samsung logo with triangle flashed up for a half a second and i released my fingers from the keys
and then the logo show up again and nothing else happened...
is it possible to reset my phone completely? i only need a bootable phone for now...
Thanks!
XXY
Not sure I'm in the same boat...
is anyone seeing the same as I am - I also can't boot into Recovery since nightly 20130824. I can boot into Download mode... and... I can still boot into my current CM10.2 nightly (20130824)!!!
I've tried reflashing CWM using ROM Manager, even a few times... but nothing changes. Trying to get into recovery using VolUp+Home+Pwr doesn't work (after Samsung GT-N7000 white text... blackscreen (which I can see is still 'on'). If I try to boot into recovery using Rom Toolbox or similar, it behaves the same and I can only get it to reboot into the ROM once I've pulled the battery out and then put it back in and connected to a charger so the battery charging icon shows... which somehow clears the 'boot into recovery' flag somewhere.
Very concerned... saw something in the changelogs back at 20130824 about recovery fixes and wondered if this might happen. The first time I got it to boot back into the ROM something wasn't quite right with the internal/external SD mounts... all my ringtones and alerts etc. were reset to just numbers (e.g. 40125) which actually happens more often than I expect... but this time I couldn't find the ones I usually use in the selection list.
I rebooted with SD card out... then re-inserted it... and then things went back to how they should be and I could see and select my preferred tones again.
Have tried booting into Recovery via app, via hw keys... with SD card in, SD out... SIM card in... SIM out... both SD and SIM out... there's just no way into recovery.
Using ROM Manager I also tried to setup the alternative Recovery (TWRP) but that also gets stuck with the message 'ROM Manager has been set up to use your existing recovery installation'. but same behaviour when trying to boto into recovery.
I've also used Android Root Toolkit to try save/protect Root... Restore Root.. etc. but to no avail.
Any ideas... please?
EDIT: Thanks for the Odin3 / PhilZ Kernel advice - that seemed to work.
Question: Now that I've got back to recovery and updated to nightly of 20130826, did I overwrite PhilZ kernel?
yes
Yes,
ideas:
Read the rom thread, fixes there
So yeah i bricked my phone, its stuck in a damn bootloop and i cannot enter recovery no matter which one i install.
I even flashed stock rom via odin and tried both flashing twrp and cwm, none worked, whichever rom is installed i still get in a damn bootloop and i cannot boot into recovery (blank screen).
Is there anything i can do for my phone?
Thank you all in advance
Try to flash Dorimanx Kernel using Odin (v9.34 for JB Roms, v8. for Stock Roms)
I will upload a guide tomorrow for people facing problems with their recovery. I will edit this when its finished.
EDIT: Here it is: http://forum.xda-developers.com/showthread.php?t=2441940
Sent from my GT-I9100 using xda app-developers app
Hit Thanks please
OverkillSRB said:
So yeah i bricked my phone, its stuck in a damn bootloop and i cannot enter recovery no matter which one i install.
I even flashed stock rom via odin and tried both flashing twrp and cwm, none worked, whichever rom is installed i still get in a damn bootloop and i cannot boot into recovery (blank screen).
Is there anything i can do for my phone?
Thank you all in advance
Click to expand...
Click to collapse
can you tell me what did you do to caused that ? or do you have download mode ?
anyway it seems to me a hard break . probably you messed your boot . you got two options:
1.use "RescuePDA" (you can find the thread and every thing in galaxy mini II development)
2.take it to a service center
dlb4all said:
can you tell me what did you do to caused that ? or do you have download mode ?
anyway it seems to me a hard break . probably you messed your boot . you got two options:
1.use "RescuePDA" (you can find the thread and every thing in galaxy mini II development)
2.take it to a service center
Click to expand...
Click to collapse
Download mode is the only thing that works, as i said recovery wont boot and any rom i install is getting into a bootloop. ((
I used triangle away, the problems started after that. I had cwm and cm 10.1 08/18
Is there any way to factory reset using odin?
I have the same exact problem.
I follow the discussion with interest.
zeruel857 said:
I have the same exact problem.
I follow the discussion with interest.
Click to expand...
Click to collapse
Zeruel, i seem to have somehow fixed the problem, however not entirely.
I downloaded some random recovery rom, flashed it with odin and wiped everything (cache, factory reset, dalvik cache), and reinstalled cm 10.1.
Then i flashed back the thewhisp's recovery and booted into cm with no problem.
However now i cannot boot into recovery using volume+- and home and power button, i have to boot to it from the cm.
That i dont know how to solve, but at least my phone works fine
Thank you, but I think to have solved the problem with RescuePDA.
A big thanks go to dlb4all, thank you a lot mate.
zeruel857 said:
Thank you, but I think to have solved the problem with RescuePDA.
A big thanks go to dlb4all, thank you a lot mate.
Click to expand...
Click to collapse
no problem man . my pleasure :good:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
http://theunlockr.com/2012/10/22/how-to-root-the-samsung-galaxy-s-i9000-cf-kernel-method/
Click to expand...
Click to collapse
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Hello!
Can you get into download or recovery mode?
If you can go to recovery try wipe cache and if it doesnt work try wipe data but remember it deletes all apps!!
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Don't worry, it is just a digestion problem (bootloop). CF-root doesn't work with every firmware. If yours wasn't compatible, bootloop is normal reaction. Check my last thread and there you can find step-by-by step guide how to unbrick it.
BeNdErR said:
Hi everyone,
I was trying to root my Samsung GALAXY S GT-I9000 to install some custom roms. I followed this tutorial to install ClockWork via Odin:
everything went fine in Odin, no error messages, but my phone is stuck on the initial loading screen (that one with the samsung logo) and it's not loading properly.. I tried to wait like 10 minutes, but nothing changed..
How can I restore everything as it was before? Or flash properly a new rom??
Please help, I'm afraid I broke it..
Thank you in advance for any advice
Click to expand...
Click to collapse
Here you go!!!
Don't worry. It is just a little thing.
Read my post here in the below given link. The solution is given in easiest steps.
forum.xda-developers.com/showthread.php?p=47034690#post47034690
Thank you so much guys it's working now, (even though I put the original one)!
I'll try to root it again asap!
tetakpatak said:
If yours wasn't compatible, bootloop is normal reaction.
Click to expand...
Click to collapse
How do I know if it's compatible or not? What should I check?
_Flasher_ said:
Can you get into download or recovery mode?
If you can go to recovery try wipe cache and if it doesnt work try wipe data but remember it deletes all apps!!
Click to expand...
Click to collapse
Sorry for the late reply: anyway no, the only thing I could do was watch the phone reboot and reboot and reboot and reboot and, finally, reboot
Thank you again!
BeNdErR said:
Thank you so much guys it's working now.
How do I know if it's compatible or not? What should I check?
Click to expand...
Click to collapse
Great, mate- I'm glad it works again
CF-Root is made AMAIK for Gingerbread ROMs only, and if you have Froyo it is enough to flash SpeedMod root kernel that already features CWM recovery, Busybox and SU. You should always ready very carefully the first posts of the files you flash, so you will void many potential problems.
If you did it after my unbrick guide thread, backup your IMEI No as soon as you root your phone (described how to)
Just click "thanks" button beyond posts which were useful for you, it is our way to express it on this forum (and many us here are visiting the forum to help each other)
GT-I9000 blackout, can only go to download mode after Odin
I also tried rooting my GT-I9000 with Odin, I got a FAILED message and my phone will no longer boot, it can only go to download mode, so I tried restoring via Odin. Sometimes I get FAILED and 1 time got pass but the unit is still in the same condition, black out except to go into download mode. Please help.
jaysonuao said:
I also tried rooting my GT-I9000 with Odin, I got a FAILED message and my phone will no longer boot, it can only go to download mode, so I tried restoring via Odin. Sometimes I get FAILED and 1 time got pass but the unit is still in the same condition, black out except to go into download mode. Please help.
Click to expand...
Click to collapse
Which Odin version did you use and what exacactly did you try to flash? Which system / Android version is installed om the phone?
tetakpatalked from N7100
Hi Guys,
I have s3 GT-I9305, android version 4.1.2, baseband version I9305XXBLL5. Australian model for Optus.
I successfully rooted and installed Philz_Touch_6.19.3 _ After that I could do Nandroid online backup and confirm it is rooted.
When I tried to flash custom ROM today - I found I can't boot in CWM/Philz recovery mode. Then I tried to different version of Philz/CWM and TWRP but none worked. It keeps booting in stock recovery mode- I get message as shown in attached image.
PS: I have USB diagnosis checked but haven't unlocked boot loader?
to be specific: my phone works fine - boots fine - It is just I want to load custom rom and it won't go to custom recovery and I can't load custom ROM.
Thanks.
HELP!
can anyone please help me out here!
I kept searching and found some solution but none worked.
I used triangle away. - didn't work
Installed custom recovery without checking auto reset and started after pulling battery out. - didn't work
It still boot in odin mode and I can't go to custom recovery
i have the same problem too when i got my phone flashed 3rd recovery last year,
the stock recovery can automaticly restore itself after reboot~
but i found the solution here in xda,just flash a zip to unlock the self-protection of the stock recovery~
i will tell you the link and the attachment several hours later after my work,if you cannt wait, you can search it here,maybe you can find it yourself.
Sent from my GT-I9305
Aphirodite said:
i have the same problem too when i got my phone flashed 3rd recovery last year,
the stock recovery can automaticly restore itself after reboot~
but i found the solution here in xda,just flash a zip to unlock the self-protection of the stock recovery~
i will tell you the link and the attachment several hours later after my work,if you cannt wait, you can search it here,maybe you can find it yourself.
Sent from my GT-I9305
Click to expand...
Click to collapse
I had a quick search but couldn't find it. Will greatly appreciate if you can post link.
Thanks
even after you flash a custom recovery...your phone will automatically flash stock recovery every time it reboots...so that's why you will get into stock even if you flash CWM/TWRP or what you like.....
here is the solution: http://forum.xda-developers.com/gal...-cf-root-cwm-recovery-ported-supersu-t1914394
read at the end of the first post....WORKAROUND......
i used myself and worked....
ggmm2013123 said:
I had a quick search but couldn't find it. Will greatly appreciate if you can post link.
Thanks
Click to expand...
Click to collapse
the guy offered the post which included the solution.
try to flash the "Remove-boot-recovery.p.zip",it will work..
good luck
:fingers-crossed:
Done
Thanks guys.
Above solution didn't work for me but I got it working through rom manager App. I reboot to recovery through ROM Manager and it worked.
How ever After I installed Pacman rom, I couldn't use App as there were no Gapps and wouldn't boot to recovery. The workaround here was to press home, volume up and lock button simultaneously and release it after few second and it will go to custom recovery.
In the end, I am on Pacman Nightly 06/04/2014 with Philz touch recovery.