Hello
I have a problem with Wifi tethering : it can connect but I only have the upper arrow on the notification bar icon. So I can't load webpages.
I tried a lot of roms : latest jelly bear 2.55, CM 10.1, Utacka's PA 2.57 011013, imilka's PA 2.55...
It only worked with imilka's PA 1.99 of August.
Someone has an idea?
Sent from my Nexus 10
http://forum.xda-developers.com/showthread.php?t=1373728
The problem is that almost no one go and see the Q&A section. Last time I asked a question there, I had no answer....
Sent from my Nexus 10
I've just tried jellybam 5.0.0, jellybam 4.1.0 and asylum 10.1 without any success so far
Sent from my Nexus 10
I'm using stock ICS 4.0.4 and have no issue with WiFi tethering. Although there are times it fails, but it really depends on your network connection.
Sent from my GT-N7000
is there a general tethering problem on custom, or jelly bean roms?
would be a reason not to upgrade, for me..
It really works well with cm 9 and PA 1.99.
It should work with cm 10.1 since most of the people out there report it working but it doesn't with me :/
Sent from my Nexus 10
I've tried with new AOSPA and I can report a new thing : bluetooth tethering works with Wifi connected. But as soon as I am on the mobile network, it doesn't work.
Sent from my Nexus 10
Related
Hi!
I have decided to test JB on my Gtab P1000 (GSM) french model. It was running previously under CM9, thanks to the very good job of all the developpers!
I have installed CM10 by cdesai but I have some troubles with the UI: the icons are below the search bar and notification bar. I have search various option without luck. Furthermore, the unlock screen (I used schema) is duplicate with still the slide unlock screen which does not deactivate.
I have then test SAPIR which exhibit the same problems.
I precise I have restocked the GTab before applying new ROM o start from a clean tab.
Humberos ROM is the one which gives the best UI but there it is not very clear to me how various tablet options are working, with some unexpected "UI has stopped" when playing with "toggle status bar" from the system menu.
Is there somewhere some kind of "how-to" for UI configuration on JB?
I have to admit that there is so many info available that I'm lost in understanding various ROM differences...
Which ROM could be considered as the most "stable" and "stock"?
Thanks for your support!
Hi,
I'm running the latest HumberOs 20121021 rom and I have to say I have no problems at all with the tablet mode.
you just select it from the options and I works fine for me.
Another possibility is to reduce the DPI to something about 132-120.
The problem is that everything gets too small for my taste.
I hope it helps.
Brgds
I'm using Alroger cm10 20121108 and it works like a charm.
Cheers
Fiber7
Sent from my GT-P1000 using xda app-developers app
Hi there,
today i've flashed my SGS+ with CyanogenMod 10 by ivendor (alpha2 & 3). First thing i noticed was that the device didn't show up my ad-hoc from my pc with wlan-stick. After restoring my old stable backup (cm9 beta3) all works fine. I've tested this with AOKP JellyBean Alpha 1 too, but same thing. Is this a generally bug in the new jb's alpha for SGS+?
Thanks for your help.
U can copy wpa suppliciant from ivendorr ics over jb. And u will see ad-hoc wifi hotspot. But u need castagnal kernel. Without castagnL kernel you will stuck on obtaining ip adress..
Sent from my GT-I9001 using xda premium
Hi, actually i have two questions :
First: i am using a JB Leak XXLSC ( Ultimate 5.1 In particular), the rom is awseome but
when it come to mobile data connection its disappointing. When the mobile date is connected
to any gsm (2g) network the connection is stable and does not drop but when i connect to any
wcdma (3g) network the connection is awful it just keep connection for 10 20 seconds maximum
then drop for while and reconnect again and the same happens always. I changed the modem and
used XXLSC XXLRK DDLR1. Note that when using any aosp rom with DDLR1 i have perfect 3g
connection. any one faced the problem may help me with a solution ?
Second: I've noticed that all tw based roms connects to HSPAP (H+) network which have the highest
speed (20mb/s), but when using any aosp rom (cm9,cm10,aokp,cna,slimbean) the maximum speed
i get is HSDPA (12mb/s), so why is that? anyone care to explain
UP ....................
simply flash a stock ics rom if you can't live in rom with bugs it's a leak version of official jb not a official stable one my friend
Sent from my GT-N7000 using Tapatalk 2
abhinav quietly brilliant said:
simply flash a stock ics rom if you can't live in rom with bugs it's a leak version of official jb not a official stable one my friend
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
I Know that, but I want to know if everyone else experiencing the same issue or is it just me?
Up again ...
Hi, I am using a CM 10.2 based rom and I am having several problems. My wifi doesn't work, even after a clean flash. Is there a fix for that, what should I do ?
Is this issue only with cm10.2? Try other rom and check whether problem persists
Sent from my AweSoMe ?♥Note2♥?
mannyvinny said:
Is this issue only with cm10.2? Try other rom and check whether problem persists
Sent from my AweSoMe ?♥Note2♥?
Click to expand...
Click to collapse
Hello. I flashed the stock jb xxlsz and the issue still continues can this be a hardware issue?
please help - Galaxy Note N7000 almost dead
mannyvinny said:
Is this issue only with cm10.2? Try other rom and check whether problem persists
Sent from my AweSoMe ��♥Note2♥��
Click to expand...
Click to collapse
Hello,
I'm a newbie on rom flashing etc...
and recently I tried to update my Galaxy Note N7000 using this ROM : cm-10.2-20131108-NIGHTLY-n7000
and the wifi started to get crazy.
I experienced connexion issue.
WIFI was disconnected sudently, then I tried to revert to Stable version of Cyanogen mod 10.1
but wifi was off.
I tried to flash using different stock rom :
N7000XXLT9_N7000XXLT3_N7000OXXLT3
N7000XXLTA_N7000XXLT4_N7000VD2LT4
N7000XXLSZ_N7000XEFLS4_XEF
N7000XXLC1_N7000OXALC1_OXA
N7000XXLRI_N7000XEFLP2_XEF
and sometimes I don't knwo why or how the wifi cams back (not always even installing the same stock rom), but with connexion issues.
using this sequence I can get wifi connexion sometimes...
install :
1 - N7000XXLSZ_N7000XEFLS4_XEF
2 - philz kernel LSZ
3 - N7000XXLTA_N7000XXLT4_N7000VD2LT4
4 - Philz Kernel LTA
5 - XEU-N7000XXLT9-20130611091825
5 - Philz Kernel LT9
6 - Rom Radio XXLSC
7 - Kernel : speedmod-kernel-n7000-jb-k5-5-CWM
sometimes the wifi is not recognized, and the mac address is empty.
I'm bit lost, and I would like to know how to revert to a stable situation.
maybe this is due to the kernel.
I'm using Philz kernels aligned with the rom.
Hello,
back after many hours spent yesterday evening playing with different ROMs, Kernels.
in fact I'm currently using my phone as a tablet, without SIM card in it.
and it seems mandatory at least once to put a valid sim card in it.
I tried to put a valid SIM card with 3G data connexion,
no issue with the wifi during 3hours.
shutdown thephone
then remove the SIM and power on the Phone
miracle the phone connect on the wifi without issue!
so it is good to know that SAMSUNG Galaxy note requires at least once to connect on mobile data network.
SHORT VERSION: is there any stable rom for the i9305 that can also run banking apps that look at if your rooted? Or just a stable rom for i9305!? Or even a stock rom that has no bloat-ware (for i9305 of course and in uk)?
LONG:
So I started out a journey looking for a good stable rom and of course cyanogen caught my eye but I unfortunately swapped to a 4g service and swapped my phone right before embarking on this journey to a i9305 - crap!
I thought wow great 4g and 2gig ram it'll be perfect with cyanogen 11 so I waited and no M build for i9305 all year long argh! So I gave up and tried a nightly cyanogen 11 and it was buggy as hell. So gave up on that after a few weeks and trying different updates moved to carbon - again only nightly available even more bugs maybe I was just unlucky in timing but on to cyanogen 10.1 I was going backwards now not the most fun but it still has a few bugs but is way more stable and I loved the speed and camera was great but still it feels a bit old and I still prefer stock . So I am thinking now I either give up n get stock or go on to yet another one but im not confident now ...thanks!
i also like stock ROM...until now didn't found one which will have wi-fi working with stock kernel...so i will give it a try to rXTREME.JB.4.3-V5.1.1 with a custom kernel and see how it works...
spiderman07 said:
i also like stock ROM...until now didn't found one which will have wi-fi working with stock kernel...so i will give it a try to rXTREME.JB.4.3-V5.1.1 with a custom kernel and see how it works...
Click to expand...
Click to collapse
Hmm yes too many bugs in all the custom roms on this device wish I could try a cyanogen M build ...
if you want to install rXTREME you MUST make a full wipe....in instruction it says it is recommended....but in reality is a MUST...all kind of bugs...and freezes...just opened screen and tried to unlock it...light effect...instant freeze...had to reboot...
i also wanted a stable CM11....not with huge battery drain...and other force closes....
hi men ,
i used the slimKat rom on my gti9305 and it's the perfection for that
Try Pacman RC1 everything is working very very less Force closes though but I have flashed paranoid ROM gapps and Google play app is not connecting :/
Very less it works
Sent from my GT-I9305 using XDA Free mobile app
I flashed this recently. Its working PERFECT :good: :good:
(bloatware can be turned off)
performance improved, minimum ram usage, longer battery life (comparing to 4.3 stock rom)
NO PROBLEMS
[ 4.4.4] [ROM] [STOCK-Official] [I9305/I9305N]
http://forum.xda-developers.com/gal...ck-rom-4-4-4-gt-i9305n-i9305nxxufni4-t2886807