Related
I'm looking for a case for my Nook Color so my 2 year old daughter can hold it without getting her fingers on the screen and messing up the games she's trying to play. (She loves Angry Birds but can't ever make them go because she's got her thumb on the screen from holding the NC. Basically I want to turn the nice small bezel and thin NC into something big and grippy for a toddler. Any increase in drop resistance/durability would be a plus but not needed. Has anyone seen anything like that?
Thanks in advance,
- Aerlock
tried the otterbox
I have the Trident case and my 4 year old plays Angry Birds on it. It's very durable.
I took a look at the Otterbox and Trident case and while they both appear sturdy they don't look to be big enough for a kid to hold and use the Nook easily.
This is exactly what I'm after, but sized for a Nook. Something that gives a good solid grip that she can grab onto without getting her thumb/fingers on the screen and messing with the touch detection. I already emailed their support and they have no plans for a Nook version. Any one seen anything like this from other places?
- Aerlock
I've not seen anything like that for the NC, but I will tell you, the Trident Aegis case makes it plenty chunky and "grippy". Add a screen protector and you should be pretty good to go.
At least my 2 yr old cousin works well with this combo.
danvee said:
I've not seen anything like that for the NC, but I will tell you, the Trident Aegis case makes it plenty chunky and "grippy". Add a screen protector and you should be pretty good to go.
At least my 2 yr old cousin works well with this combo.
Click to expand...
Click to collapse
+1
Tridents case makes it very durable and easy to grip
Sent from my NookColor using XDA
All the cases look like they won't hold the device well, they all look not very well made and very bulky
found this if anyone is looking for a lower profile fit case that covers the back
http://www.amazon.com/gp/product/B008GFHP5O/ref=oh_details_o01_s00_i00
I bought that and a tablet stand to prop it up when i need.
Yeah, I haven't seen any cases worth buying. The only one I like is the official Google case, but it lacks a kickstand.
Not impressed, if I get one of the current selection, it would be a compromise and only if it's dirt cheap for the meantime..
So far there is only 1 case that I would pull the trigger on. I am having reservations because there have been concerns over the manufactorer's costumer service and their dealays/lack of updates regarding shipping but if nothing similiar comes out soon then I will gamble on it and pull the trigger.
I hate that the official case is not available at the launch of the device, especially when you have so many people reporting that they've already scratched their screens. There isn't even an ETA.
I agree, don't like any of the cases...i spent many hours looking through the forums and amazon and don't like any of them even the official one. I ended up ordering this one: http://www.amazon.com/gp/product/B008GFHO6Y/ref=oh_details_o00_s00_i00 not sure if I'll be happy with it, assuming it's temporary until something better and slimmer comes along. I was going to order a moko case but the right side of the nexus seems exposed when closed and I didn't want to wait until the 25th: http://www.amazon.com/MoKo-Slim-fit...=UTF8&colid=SSJ5KLBELNZ0&coliid=ICUJNDX8PNE5B
What about these?
http://www.amazon.com/gp/product/B008D2Q8RG/ref=oh_details_o01_s00_i00
http://www.amazon.com/gp/product/B008F05Q2E/ref=oh_details_o00_s00_i00
Didn't like much of the cases either. Liked Biz-E-Bee's cases with the Android mascot on them but it lacked a stand, so I bought this http://www.amazon.co.uk/gp/product/B008GSMRAY until something better comes along.
th3drow said:
All the cases look like they won't hold the device well, they all look not very well made and very bulky
found this if anyone is looking for a lower profile fit case that covers the back
http://www.amazon.com/gp/product/B008GFHP5O/ref=oh_details_o01_s00_i00
I bought that and a tablet stand to prop it up when i need.
Click to expand...
Click to collapse
yes i also hate all the current cases i've seen. I'll probably end with a leather sleeve, my wife wants something just like her nook, can't even find something like that (basically snaps in and looks like a book (http://www.barnesandnoble.com/p/turquoise-quote-cover/23751364?ean=9780594296362).
I don't want elastic bands to hold it in, I dont want something too bulky, and don't want to have to unclip it to stand it up
I would like it to have some sort of standing property and smart cover feature, is that soo hard, slim profile?
The treegloo ones are nice, a little bulky for me, but my wife would probably like it, but i'm not paying $80 for a case (https://www.treegloo.com/)
Yup, haven't seen a single one i've liked besides the official case.
not a fan of any case yet either,
i had a yoomee neoprene case that i got for $3.50 shipped from amazon (prime), unfortunately they no longer offer prime shipping on that item without more in your cart, so that's doing the part for now...it'll do until a better one pops up with wake/sleep at a decent price
The Blurex case here is very nice. Blurex makes amazing cases in my opinion. So if this is your type of case you needn't worry about the quality.
I'm holding out for an Apple smart cover type thing, though it doesn't have the metal back or sides for the magnets to work.
I don't really feel like the back needs to be covered, I just want the screen covered and I want it to function as a stand as well.
blaine.hale said:
I'm holding out for an Apple smart cover type thing, though it doesn't have the metal back or sides for the magnets to work.
I don't really feel like the back needs to be covered, I just want the screen covered and I want it to function as a stand as well.
Click to expand...
Click to collapse
Same here, if anything u can add the magnet yourself
Me too, I want a nice hard backed "snap on" type cover with a smart front cover which also acts like a stand like this http://www.amazon.co.uk/Swees-Ultra...X9DG/ref=sr_1_3?ie=UTF8&qid=1342463463&sr=8-3 which my housemate has for his iPda, just got a simple slip cover for it for now!
blaine.hale said:
I'm holding out for an Apple smart cover type thing, though it doesn't have the metal back or sides for the magnets to work.
I don't really feel like the back needs to be covered, I just want the screen covered and I want it to function as a stand as well.
Click to expand...
Click to collapse
Same here. All those faux-leather cases are bulky and lack any style.
I really want something simple like the apple smart cover, which doubles as a stand.
I might just wait for a Dodocase.
ejkeebler said:
yes i also hate all the current cases i've seen. I'll probably end with a leather sleeve, my wife wants something just like her nook, can't even find something like that (basically snaps in and looks like a book (http://www.barnesandnoble.com/p/turquoise-quote-cover/23751364?ean=9780594296362).
I don't want elastic bands to hold it in, I dont want something too bulky, and don't want to have to unclip it to stand it up
I would like it to have some sort of standing property and smart cover feature, is that soo hard, slim profile?
The treegloo ones are nice, a little bulky for me, but my wife would probably like it, but i'm not paying $80 for a case (https://www.treegloo.com/)
Click to expand...
Click to collapse
Yeah, I want something that looks like a book. The style of your wifes nook case is nice but with different coloring and a white elastic band, it woudl be perfect. I want the treegloo case except Id prefer if the frame wasn't made out of wood but there's nothing else like it on the market for the N7 and the base price just went down $5. I pretty much want a FieldFolio case (fieldfolio.com) but for the N7.
Same. Holding out for better case
Sent from my SGH-T989 using xda app-developers app
Here's an awesome Belkin case I posted about in another thread. Picked it up this morning from Fry's Electronics. It's gorgeous and holds my tablet perfectly, even if it's made for the Galaxy Tab 7".
clockcycle said:
Not impressed, if I get one of the current selection, it would be a compromise and only if it's dirt cheap for the meantime..
Click to expand...
Click to collapse
This. I've been looking for days for a slim-profile, rotating case. I've found nothing, not even among the Kindle Fire cases, that would fit that criteria and the Nexus 7. Even if I wanted to compromise and get an interim case, most decent cases start at $30 - far too much for such a case.
Sent from my Nexus 7 using xda app-developers app
Its an accessories related question and i hope its ok to ask here. I just received my Nexus 7 32GB and loving it! As what i would do usually, I immediately started looking for back cases / covers / pouches for this lovely device and then I tought, does it really need one? The material at the back doesnt look like the one that could easily be scratched. But then I see so many cases around and people using them. Maybe to better protect the device when/if it falls? I dont like folio cases anyway and only buying a back case looks like a waste.
Any suggestions?
Sent from my GT-N7100 using xda premium
It can get scratched. I have mine in a case almost all the time and I found a scratch on mine somehow
While it's not essential, I'd still go with a case, because you just never know what may befall your new shiny tablet. Since a lot of cases on the market appear to be cheap and ugly, buy something that is well built and from quality materials. This may set you back $50 or more, but trust me, it's well worth it. The tablet will just feel better in your hand, more secure, and you won't have to worry about the screen being scratched or it getting dinged on the side.
Ever since I got my Norever leather case I like the way my N7 feels way more than it does without it.
If you're only interested in a "back case" then I would consider the Incipio Feather. Here's my review. The Feather did come with a screen protector, but I'm with the others in this thread and I would just go with a full case to protect the whole thing.
FULL DISCLOSURE: The Feather was provided to me by Incipio for the purpose of review. I do not receive any compensation for my reviews.
Protection required
I would have to agree that i enjoy having my nexus out of a case . I like the feel of the back and for me it would not get scratched as im careful.. But I use it while im out and about all the time.. I have almost dropped it a few times.I think if you drop this device and it hits the edge of bezel The screen will crack.So i recommend having a nice case . For me i have the bobjgear silicone case . It does add bulk and the nice look of the device . But it provices alot of protection.
Happy Nexus Owner
Erica Renee
I am thinking of a simple plain matte black slim tpu case. Let's see if I can find one.
Sent from my Nexus 7 using xda premium
Well, having dropped my N7 twice, I can attest to getting a case for the Nexus lol. Both drops were from at least 3 feet and the first one went down rolling to the sidewalk from my truck in my Treegloo case. The N7 came unscathed but the Treegloo had an indentation that could barely notice. The second fall was in the garage cement floor. This time the fall was straight down back side down and went SPLAT. I freaked!:silly: and immediately took it out and found it turned on fine and the glass was uncracked. So I went inside and put the N7 down but noticed the cover didn't sit flush like it normally did, so I took the N7 out of the case and saw the backing corners were coming undone and I had to press down to re-snap them back into the corners again.
Now the treelgoo has been semi-retired now that I have the Seidio Active case on. It works because I now also use the Kropsson Aero modded universal car mount and using the treegloo wouldn't work in that case.
Simply... Yes
as in the title yes, I have had a couple of small falls and one or two larger ones, and having the stock official ASUS ones may have saved it a lot of times, so getting any that will have some bump protection is a definite go ahead
call it insurance
I like the naked feel of the N7 in my hand. It's just right. The options available are all over the map. Those folding contraptions remind me of the old paper maps that I could never get right. The armored ones look like two handers and you are going to drop test it because it's a job just to handle all that bulk. I'm going with a leather YooMee pouch [correction: they call it a sleeve] for transport purposes and working the N7 raw.
Noticed Otterbox just announced the Defender series for the N7.
I like Otterbox but $70 is too expensive for a plastic case. Hell, you get a hand made leather Noreve case for $72.
xips said:
I like the naked feel of the N7 in my hand. It's just right. The options available are all over the map. Those folding contraptions remind me of the old paper maps that I could never get right. The armored ones look like two handers and you are going to drop test it because it's a job just to handle all that bulk. I'm going with a leather YooMee pouch for transport purposes and working the N7 raw.
Noticed Otterbox just announced the Defender series for the N7.
Click to expand...
Click to collapse
I think this would be good. I am not too worried about dropping it but more want to protect it from scratches. A nice leather pouch is what I need. Thanks! Off to eBay
Sent from my Nexus 7 using xda premium
I only use a case outside of my house, otherwise for reading and such I go caseless. I have carpet everywhere and even with a couple drops it's not damaged. It's pretty solid.
ynrozturk said:
I like Otterbox but $70 is too expensive for a plastic case. Hell, you get a hand made leather Noreve case for $72.
Click to expand...
Click to collapse
You're right about that. I figure once things settle down they'll run in the $50 neighborhood. Still, as much as I love Otterbox, I'm afraid it will add too much bulk and that's entirely too much for a stand.
I've had all sorts of adventures with my nexus 7, and to be honest back plate is as good as new, the silver border however is a different story.
I went with a Cruzerlite TPU case $19 doesn't add any bulk really comes in all colors with cool design on the back (they are the androids)
I know I don't have a lot of posts, but I've been a long time lurker and have been assisted a great deal by these forums(Hince the screen name: Got the original Droid X on pre-order).
I'm having a difficult time finding accesories for my new Note II (just received it Wednesday). I want to get this protected ASAP as this one will be with me for a long time. I need something that could give it a chance to survive a fall from a table to a concrete floor. Obviously I'll be as careful as possible, but I need to prepare for the worst.
I'm familiar with Otterbox, and while this was my knee-jerk reaction of a choice, I want something that might be at least a little different and maybe have a little style without looking like I'm going to a rave with how much neon is thrown on it. Plus I've read all of the reviews on the built in screen protector being garbage, and I don't want to be forced to buy a screen protector with a case that provides one because the built in one is garbage.
I saw that UAG is coming out with one, but their design is disappointing now that they went with the 'iPad' design as opposed to the iPhone/GS3 design (this would probably be my pick if they did).
I like the idea of the Sweet Armor case, but $70 is a bunch of money for a bumper. I have been looking around, and I think if I could find something like LunaTik's Taktik case, I would probably jump all over it.
Any and all help with a direction towards a case that will be tough enough to handle a warehouse floor and a toddler would be great. Thank you in advance!
Wat for dbacases ultra case to come out. It is a tpu with an x shaped poly carbonate shell that goes over tpu to protect corners.
Sent from my GT-N7100
@rbiter said:
Wat for dbacases ultra case to come out. It is a tpu with an x shaped poly carbonate shell that goes over tpu to protect corners.
Sent from my GT-N7100
Click to expand...
Click to collapse
Do you (or anyone else reading this) have the GS3 version that can speak to it's durability?
TopherDX said:
Do you (or anyone else reading this) have the GS3 version that can speak to it's durability?
Click to expand...
Click to collapse
I assume @rbiter is talking about the Complete Ultra dba case -- the ultra case is a normal tpu style case w/o the exoskeleton cross-member.
In that case (no pun intended) you can find a whole bunch of pictures/opinions from S3 owners of that case in this thread:
http://forum.xda-developers.com/showthread.php?t=1919350&highlight=dba
I got it for my gf's S3 and she loves it.
She has never dropped the phone though.
I saw you mentioned that you don't want to go with Otterbox, and one of the reasons was that you didn't want to deal with the screen-protector -- that others didn't like.
Otterbox makes a "Commuter" case, that, unlike the "Defender", does not include the built in screen-protector, or come as a two piece install. But, it does come with a seperate screen protector. You can check out a thread here:
http://forum.xda-developers.com/showthread.php?t=2036565
However, I guess that doesn't solve the problem of "style"....
I'll agree there; the Otterbox line has become stale, but is still an extremely viable solution for protection.
Brad.S. said:
I assume @rbiter is talking about the Complete Ultra dba case -- the ultra case is a normal tpu style case w/o the exoskeleton cross-member.
In that case (no pun intended) you can find a whole bunch of pictures/opinions from S3 owners of that case in this thread:
http://forum.xda-developers.com/showthread.php?t=1919350&highlight=dba
I got it for my gf's S3 and she loves it.
She has never dropped the phone though.
I saw you mentioned that you don't want to go with Otterbox, and one of the reasons was that you didn't want to deal with the screen-protector -- that others didn't like.
Otterbox makes a "Commuter" case, that, unlike the "Defender", does not include the built in screen-protector, or come as a two piece install. But, it does come with a seperate screen protector. You can check out a thread here:
http://forum.xda-developers.com/showthread.php?t=2036565
However, I guess that doesn't solve the problem of "style"....
I'll agree there; the Otterbox line has become stale, but is still an extremely viable solution for protection.
Click to expand...
Click to collapse
Thanks for the suggestions Brad.
I had a Commuter on my Droid X. It may end up being the one I go with, but I figured there we be so much more of an evolution since then on cases for 'premium' phones. I wouldn't mind spending the money for a good looking case that would also provide superior protection. I'm not going the folio route because I just don't like the idea on a phone that I use as a camera regularly (work and home).
I've got the sweet armor case. It's disappointing. The GPS suffers a bit though I didn't notice a reduction in phone signal. 2 big disappointments were the feel. It has very sharpe edges which makes holding it uncomfortable and the top edge hurt my ear when talking. The second issue is it makes the phone wider which combined with the sharp edges makes the phone harder to use 1 handed. For the money it's not worth it at all.
Get the commuter. Best case in my opinion.
gpgalanis said:
Get the commuter. Best case in my opinion.
Click to expand...
Click to collapse
If i'm going with that, I have to find a Best Buy around me that still has one in stock. I have 2 Reward Zone Certs. I need to use. I may have to track one of those down or the Defender just as an expensive carry over until another one of the suggested is available.
I ordered my cases from amazon.co.uk and amazon.de since I live in Europe. They are also available in amazon.com.
I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
dengood1 said:
I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
Click to expand...
Click to collapse
http://www.amazon.com/Duzign-Sentin...1378141878&sr=8-3&keywords=duzign+case+note+2
This case has been discussed by many on this forum and it has good reviews. It is definitely protective and grippy. You can even tell from the back rubbery design. If you want something slim, with a soft matte feel, i'd get the Six Abundant Case: http://www.amazon.com/DBA-Cases-Abu...=1378141992&sr=8-1&keywords=six+abundant+case
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dengood1 said:
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
You're very welcome
opasha said:
You're very welcome
Click to expand...
Click to collapse
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
From all the reviews and things I have heard about it, it seems to be in the middle. A hard rubber. So it's good for shock absorption. Definitely not a soft rubber because that would wear out very easily. However, from what everyone in the forums have said and from the amazon reviews, it seems like it will stay in place without issue. Also, it's only $10 and from amazon. If you don't like it, you can ship it back the same day for a full refund without any cost to you. Just keep the original box/packaging.
Here's a quote from someone who has it: "The back part of the case (the black exterior) feels more like silicone than plastic which gives it a nice look and grip. I have dropped my phone once on this case and I have to say that this case does a very good job on absorbing impact."
dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Brad.S. said:
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Click to expand...
Click to collapse
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
opasha said:
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
Click to expand...
Click to collapse
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Brad.S. said:
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Click to expand...
Click to collapse
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
opasha said:
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
Click to expand...
Click to collapse
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Brad.S. said:
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Click to expand...
Click to collapse
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
opasha said:
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
Click to expand...
Click to collapse
I never printed any cases for my Note 2, just the inserts for the UAG case with lettering and glow in the dark filament etc. I did make four cases for my gf's S3 but in the end she moved to a pink folio wallet case (which would take too much time to make haha). I've since then had two dead SD cards.. So I've lost a lot of pictures (backups are my priority every 24hrs now..). The cases were more of a "wow factor" type of thing. Everywhere we went people asked more about her case than my huge phone lol.. Lead to a lot of explanations of what a 3D printer is.. But After a few times on/off of the case they'd get weak and start to crack at random layers of which the printer printed it (our printer has a resolution of 0.001mm).
Started sanding the area of the Sentinel case today that I hacked out with the razor to make it smoother. Only had about ten minutes with some 1600grit paper, so I got one side pretty smooth!
I wanted to pledge money to the kreyos smart watch but got worried that I'd be stuck with money in the air for it and no item on my wrist until next summer.. The galaxy gear is definitely going to be watched (pun intended)! As long as it stays within $200-300..
As you can tell, it's hard for me to commit to some purchases lol!
To op: I remember seeing some peel & stick grip strips for phones. They were just thin clear gel-type adhesive strips. Been looking for them but can't find the review. Honestly, I'd also like a grippy case..
Edit: found it! www.egrips.com/ check it out.
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
dengood1 said:
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Try the DBA Cases Ultra protection cases very good quality and good feel
http://www.dbacases.com/samsung.html
I have the UAG case. I have used the UAG line of cases for all my phones and they are solid. They have the bevel in the front so if it drops face down you wont shatter your screen and it has extra cushion on the corner bumpers. They are only $30 - $35 online. They fit on my OEM samsung dock with spare batttery charger.
The reason why I trust all my phones in the UAG case is that my wife's nephew through my note down the escalator at the mall. My heart stopped as I saw it tumble and bounce off every step. When I went to get it, the phone and case didnt have a scratch on it. The otterboxes are great but they are way too big. Especially for our note.
I am using a cheap eBay tpu. Smoke clear and it is rubber. It works great and protects just fine. Best of all it was only a buck and a half! Rubber does a pretty decent job of keeping it from sliding around unless it is on something very slick. keeps good in the hand too
Sent from my kraken (Note2) using xda app
I have the body glove from sprint.
I feel it offers the best for daily use and it has pocketablility which is nice. It doesn't get hung up as it has a glossy surface at the bottom of the phone.