Hi everybody!
I've a Samsung galaxy mini. I tried to recovery when I did a soft brick. But now, any firmware that I have downloaded work. I have tried with 10 diferents firmware from sammobilet but nothing. I can open the download mode and Odin Multidownloader can recognize my device.
When I charge and new firmware the mobile try to start but always it is the same situation with display saying SAMSUNG SAMSUNG.
I don't know what I can do.
Please Help!
you will need to flash a four package firmware
what it means is pda phone modem csc all must be filled with relevant file
flash the firmware
let it boot
it will go into recovery and will do some processing
and in no time you would be at your homescreen
boot into recovery (turn phone off then hold down middle button and power) then clear cache and data... reboot and see if that works.
I cann't go into the recovery mode just into download mode....
pryerlee said:
boot into recovery (turn phone off then hold down middle button and power) then clear cache and data... reboot and see if that works.
Click to expand...
Click to collapse
I cann't go into the recovery mode just into download mode....
And I have tried in with this two ways in a file and with 4 files but with the same result
Two ways
dheeraj (dhlalit11) said:
you will need to flash a four package firmware
what it means is pda phone modem csc all must be filled with relevant file
flash the firmware
let it boot
it will go into recovery and will do some processing
and in no time you would be at your homescreen
Click to expand...
Click to collapse
I have tried over this two ways and with the same result. On the other hand, I tried to entry into recovery mode and doesn't work.
And my final test was downloaned clock mod recovery and any positive result
Related
my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me
When phone switched off:
Home Button + Power - open recovery
Wipe Data and Cache, reboot
You could try Recovery mode and wipe.
keki92 said:
my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me
Click to expand...
Click to collapse
Your might want to try PWR + HOME to get into Recovery Mode screen, then Wipe Data (Factory Reset), when done remove battery, wait 10 sec., then insert battery and boot normally... has worked for me on the orphaned S5830D SGAce w/ DTLKI4 f/w. BUT, be aware, all user settings and installed apps are vaporized !!! Stuff on /SDCARD is safe.
Cheers,
help please
donACEsko said:
When phone switched off:
Home Button + Power - open recovery
Wipe Data and Cache, reboot
Click to expand...
Click to collapse
but my buttons vol down and vol up doesn't work
lgo51 said:
Your might want to try PWR + HOME to get into Recovery Mode screen, then Wipe Data (Factory Reset), when done remove battery, wait 10 sec., then insert battery and boot normally... has worked for me on the orphaned S5830D SGAce w/ DTLKI4 f/w. BUT, be aware, all user settings and installed apps are vaporized !!! Stuff on /SDCARD is safe.
Cheers,
Click to expand...
Click to collapse
yes i know that wiping all data works again but my keys Vol + or Vol - doesn't work it's any way to do it via SDK or ADB
RTFM !
keki92 said:
yes i know that wiping all data works again but my keys Vol + or Vol - doesn't work it's any way to do it via SDK or ADB
Click to expand...
Click to collapse
The keys needed are: POWER and HOME
The keys not used are: VOLUME +/-
keki92 said:
my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me
Click to expand...
Click to collapse
One package? Aren't you supposed to use the one with the 5 different files and not just one? To make a completely clean stock rom install, I mean. If that's what you want.
I think he(or she) want a stock rom only. You need to do a full wipe after flash with odin. Maybe touch recovery helps you, but i cant find any . You can go to download mode by "adb reboot download" , i think it cant success without wipe.
Or maybe try to flash a rom with 5 files as SuperAce609 said.
No. You can't flash 2.3.6 directly.
You need to flash 2.3.3 first , then 2.3.4 and last 2.3.6 using Odin.
Sent from my impulses.
yeowwwai said:
No. You can't flash 2.3.6 directly.
You need to flash 2.3.3 first , then 2.3.4 and last 2.3.6 using Odin.
Sent from my impulses.
Click to expand...
Click to collapse
no need for that bro !!!!
@OP
just go to recovery > factory reset(wipe data)
and then reboot......Ur done
so simple.....
lol. u guys didnt even try to understand what his problem in the first place. atleast read the first post properly before giving suggestions.
the poor guy had his vol up and down button broke, and u suggest him to wipe data in recovery.
thing is his vol up and downn button doesnt work! so how can he navigate in recovery? lol
btw op, u said that u flashed onepackagee file via odin. so how did u manage to go into download mode in the first place when your vol down button is busted?
if u managed to go into download mode again, this time flash the full package instead.
SuperAce609 said:
One package? Aren't you supposed to use the one with the 5 different files and not just one? To make a completely clean stock rom install, I mean. If that's what you want.
Click to expand...
Click to collapse
I am having the same problem.
The phone keeps rebooting on startup. The phone can go in download mode but can't go in recovery mode.
Do you know any good link to download multi file package? I can't seem to find it anywhere
which Rom You were using and which firmware do you want?
keki92 said:
which Rom You were using and which firmware do you want?
Click to expand...
Click to collapse
My phone was running 2.2.1 Froyo. I tried to upgrade it to 2.3.6 using process mentioned here. http://androidadvices.com/update-gal...wktm-firmware/
The Odin completed successfully and restarted the phone. But the phone was running spanish language. I was getting an alert after every 3-4 seconds. But i could not read it as it was spanish. I restarted the phone and it went in boot loop. The phone keeps rebooting every 2 seconds.
I can't get into recovery mode but I can get to download mode.
I have tried flashing many ROMs from sammobile.com but none of them is working.
my Galaxy s1 doesn't power up !
When i power it up he show the logo and then turn off
video:
youtube.com/watch?v=h5bX9LksF3k
Can you get it into download mode without it turning off? (Hold volume down + home button + power) Or recovery? (Hold volume up + home button + power?) Is it rooted with clockwork mode?
Sent from my GT-I9000 using xda premium
Maybe its a boot loop. Switch off your phone and check if download and recovery mode is available(see next paragraph).
If so follow the steps mentioned.
First of all download xxjw4 firmware for galaxy gt-I9000 from
http://www.hotfile.com/dl/150483619/708026d/I9000XXJW4_I9000OXAJW4_XEU.zip.html
1) Put your phone into Recovery mode (Vol up + Home + Power button) and perform a Wipe data/Factory reset, then a Wipe cache. When done pull the battery out for around ten seconds then re-insert.
(If recovery isn't working ignore this step)
2) Put the phone into Download mode (Vol down + Home + Power button)
3) Unzip the JW4 firmware folder you've downloaded to your Desktop.
4) Launch Odin and click on the button that says PDA and navigate to the PDA file you've just unzipped to your desktop and select it.
5) Connect your phone to your PC via USB. Odin will say Added and a box will turn yellow to indicate it has recognised your phone.
6) Click the start button in Odin and sit back and wait for Odin to flash your phone. When it's finished it will take a few minutes longer for the phone to reboot than is usual so please don't panic. The phone will reboot.
7) When the phone has rebooted, remove the USB cable and you now have the latest 2.3.6. It might be a good idea to repeat step 1 to make sure nothing of the old firmware is left behind.
And that's it, seven steps to 2.3.6 JW4 Value Pack and TouchWiz 4.
In case you want more info about flashing go to this site
http://www.theandroidsoul.com/galaxy-s-gets-official-value-pack-firmware-xxjw4-includes-touchwiz-4/
Enjoy
idon't have a recovery the phone isn't root and but i can get to the download mod !
still i tried what you said with the odin and it doesnt work
the phone wasn't root before and had a stock from the operator
If its a boot loop try this thread http://forum.xda-developers.com/showthread.php?t=984140
If not download the files from sammobile (2.3.6 xxjw4) put the .tar file in the PDA and 512 pit file in the pit section make sure the repartition is ticked then if it still in a boot loop search for the cfs root and flash that then get the file off the thread I gave you then flash that to the phone as instructed on the thread then your phone should work edit* you need to put your phone into download mode before plugging in and flashing
Sent from my GT-I9000 using xda premium
calum96 said:
If its a boot loop try this thread http://forum.xda-developers.com/showthread.php?t=984140
If not download the files from sammobile (2.3.6 xxjw4) put the .tar file in the PDA and 512 pit file in the pit section make sure the repartition is ticked then if it still in a boot loop search for the cfs root and flash that then get the file off the thread I gave you then flash that to the phone as instructed on the thread then your phone should work edit* you need to put your phone into download mode before plugging in and flashing
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
yeah i know the basics ! but stil it doesnt work ! can it be a hardware problem? and if it right how can i fix it ?
Did you try that method? And when did it start turning off, did you try mpding it or did it just start doing it? Does it he a knock when it turns off or is it at the same place everytime? If it stays turned on in download mode its probably software related also make sure the drivers are installed using kies
Sent from my GT-I9000 using xda premium
yizhak722 said:
idon't have a recovery the phone isn't root and but i can get to the download mod !
still i tried what you said with the odin and it doesnt work
the phone wasn't root before and had a stock from the operator
Click to expand...
Click to collapse
Does Odin recognize your phone (com12 or something like that in yellow)
If not then try different USB port or also different cable and computer.
According to my experience if you are able to go to download mode then there is always a way to fix the problem
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
If you can get into download mode (power off, hold V+/V-, insert USB), you can try flashing a ROM via Heimdall. Apex 12.5 has a package you can flash from Heimdall.
You can also try Mosaic 9, as that has an Odin-based installer package.
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again :-(
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
yes you can, use the link below and download any of the latest rom with bootloader based on odin.
http://forum.xda-developers.com/showthread.php?t=1300843
Galaxy Grand Bricked
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
KrisjNoel said:
Hey there., ive got the same problem too., cant go to recovery mode and stuck in a bootloop.,
IS there a remedy ?? PLEASE HELP
Click to expand...
Click to collapse
Read above, the answer was given.
http://forum.xda-developers.com/showthread.php?t=1300843
same problem but on a different device its gt-i9070 by samsung I download ROMs already but cant flash them there is absolute no custom recovery for this model tried anything and everything on google and xda , any solution to apply ROM not using recovery
Is this file can use to flash i9300??? Where can i get custom rom for gt-i9300 that flash via odin...bcoz my s3 also cannot boot to recovery mode to hard reset
Hey,
I'm using samsung galaxy star s5282. I rooted this phone 2 days ago. Everything went good until today when i was i my class it suddenly switched off. When i rebooted it, it hang on the samsung logo.
I tried to boot into cwm recovery mode by pressing v+, home, power but it boots into default system recovery mode.
I again flashed cwm recovery many times using odin but it dosent work. Odin shows pass but when i reboot my phone in cwm recovery mode my phone enters in default system recovery mode.
What should i do please please please help.....
Note many devices will replace your custom recovery automatically during first boot. To prevent this, use Google to find the proper key combo to enter recovery. After typing fastboot reboot, hold the key combo and boot to TWRP. Once TWRP is booted, TWRP will patch the stock ROM to prevent the stock ROM from replacing TWRP. If you don't follow this step, you will have to repeat the install.
applies to all recoveries
cheers
bhavnoor singh
surendar1863 said:
Hi,
How could i flash Custom ROM with Odin..
Because
1. I am not able to go into recovery mode by holding Volume up+Volume Down+Power Buttons
2. I could not reboot into recovery mode using adb commands (stuck at at&t screen)
3. I could not reboot into recovery by flashing any kernel with CWM.. obviously i have to use volume up+Volume Down+Power Buttons again
I am able to flash stock ROM through ODIN 1 click downloader (currently on I897UCKI2)..and its the only way i could flash a ROM now..
So is there a way to install custom rom through ODIN ?
Please help...
Click to expand...
Click to collapse
Surenda 1863,
I had exactly the same problem and it took me almost one week of fiiddling and searching the Web to solve it.
The solution was in front me since day ONE : install ODIN on the PC !
In my case, I had I had accidentally wiped out the stock ROM and the tablet was hopelessly frozen on the download mode. I couldn't turn it off to boot it back with any of the usual buttons ( Volume , Home, Power)
I made the wrong assumption that since my PC didn't see the tablet, it couldn't connect to Odin either . I was wrong!
Here is what you have to do:
1. Install Odin on your PC. Connect the tablet to it. You will see that Odin sees the tablet because there will be a caption saying "added" on the top left.
2. Press the AP tab button at the right to go to the location where your Stock ROM is. The stock ROM file will have an MD5 ending.
3 Once the file is loaded (next to the AP button) just press Start. You will see the DOWNLOAD bar gradually filling up on the tablet and at the top left of ODIN.
4. When the operation is terminated, you will see a caption " PASSED" at the top left of he Odin screen and the tablet will automatically boot up to the HOME screen.
As simple as this! I didn't even have to worry about flashing the TWRP ( or CWR) recovery system, probably because the OS ROM was already wiped out. May be your case is different. I only know that in my case it worked like a charm.
Ittiandro
Hi guys, so i got a new Mini2, and... messed with it, pulled a firmware version from a dif zone by mistake... after i had cwm jena and clockworkz working, installed that asian firmware, and never got the phone to work again, tried several stock rom installs (17 and counting, with/without jena firmware download also), it just keeps doing the boot loop, and i can't access the Recovery menu (vol +/- home power buttons at start).
I've been reading all the meaningful threads here, tried doing button combination with battery, without and nothing seems to work.
Any and all help will be greatly appreciated.
Take it to samsung service senter if u got warranty and if isnt try to use another mini 2 battery but I think it may not work and try to press all butoms at same time for 2min and if nothing work buy or make a JTag
Sent from my GT-S6500D using xda app-developers app
go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot (ofc when samsung logo will appear don't hold keys). Try few times and it will work, if not 1st then another time. Do factory restet, reboot phone and take off battery. Turn on in download mode and install MD1 XEO stock and do again factory reset using trick from above (go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot.)
Worked...
brainscollector said:
go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot (ofc when samsung logo will appear don't hold keys). Try few times and it will work, if not 1st then another time. Do factory restet, reboot phone and take off battery. Turn on in download mode and install MD1 XEO stock and do again factory reset using trick from above (go to download mode and don't accept terms (up volume) and quick hold recovery combination when it will start to reboot.)
Click to expand...
Click to collapse
You sir... you are my new hero! key trick is pressing the recovery combination quick before logo appears and ... guess what i was holding the damn buttons so hard i was thinking they'd eventually lose pressure
My mini2 is alive :angel:
I'm glad to help you cheers
I have similar problem:
1. no recovery mode, only download mode
2. no matter what stock firmware I flash using odin I get bootloop
I tried the trick to go download mode > reject codition and then press the recovery mode combination but did not work
I wonder if there is a Cyanogen firmware in tar.md5 format so I can flash with odin ?
mihaivt said:
I have similar problem:
1. no recovery mode, only download mode
2. no matter what stock firmware I flash using odin I get bootloop
I tried the trick to go download mode > reject codition and then press the recovery mode combination but did not work
I wonder if there is a Cyanogen firmware in tar.md5 format so I can flash with odin ?
Click to expand...
Click to collapse
Did flash a incompatible kernel? Try flashing stock kernel, recovery adn ROM.
Hi,
First time working with a samsung phone, so im not very used to some samsung realted soft.
I'm doing a favor to a friend, he came to this problem where his phone woudnt boot up, He says one day he run out of battery and coudl never turn it on again.
when i turn it on, it gets stucked at boot image (first attached image), if i try to charge the battery image appears but with the loading logo (the loading logo is not moving), he told me that he also tried with another battery and the same appeared.
For what i've read there is a download mode besides recovery mode. I think i have no problem entering download mode (3rd pic), even though i don't know how to use it, pressing a button does nothing, and pluggin it to a pc (drivers installed it) seems the same.
So i wanted to enter recovery mode, and trying o factory reset it, but when i try to enter most of times nothing happens, the others i get weird screen like the one i attached.
I'm not pretty sure how to preceed now. The only thing that appears to be working is the download mode. If that's the case, how can i flahs the stock firmware on it?
Thanks for reading!
jisola said:
Hi,
First time working with a samsung phone, so im not very used to some samsung realted soft.
I'm doing a favor to a friend, he came to this problem where his phone woudnt boot up, He says one day he run out of battery and coudl never turn it on again.
when i turn it on, it gets stucked at boot image (first attached image), if i try to charge the battery image appears but with the loading logo (the loading logo is not moving), he told me that he also tried with another battery and the same appeared.
For what i've read there is a download mode besides recovery mode. I think i have no problem entering download mode (3rd pic), even though i don't know how to use it, pressing a button does nothing, and pluggin it to a pc (drivers installed it) seems the same.
So i wanted to enter recovery mode, and trying o factory reset it, but when i try to enter most of times nothing happens, the others i get weird screen like the one i attached.
I'm not pretty sure how to preceed now. The only thing that appears to be working is the download mode. If that's the case, how can i flahs the stock firmware on it?
Thanks for reading!
Click to expand...
Click to collapse
You would do the same thing as if it were custom firmware, goto http://www.sammobile.com/firmwares/, and download the stock firmware compatible with the device
Enter the device in download mode and flash the stock firmware with Odin
Instructions by SamMobile self:
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minute
dolphinman310 said:
You would do the same thing as if it were custom firmware, goto http://www.sammobile.com/firmwares/, and download the stock firmware compatible with the device
Enter the device in download mode and flash the stock firmware with Odin
Instructions by SamMobile self:
Extract (unzip) the firmware file
Download Odin v3.09
Extract Odin zip-file
Open Odin v3.09
Reboot phone in Download Mode (press and hold Home + Power + Volume Down buttons)
Connect phone and wait until you get a blue sign in Odin
Add the firmware file to AP / PDA
Make sure re-partition is NOT ticked
Click the start button, sit back and wait a few minute
Click to expand...
Click to collapse
thanks for the reply, i think i might be doing something wrong, ODIN failed, i attach a screenshot, any idea?
I cannot tell much from the screenshot to be honest, all i can point at would be a newer version of Odin as the instructions told: [LINK TO ODIN 3.09]
dolphinman310 said:
I cannot tell much from the screenshot to be honest, all i can point at would be a newer version of Odin as the instructions told: [LINK TO ODIN 3.09]
Click to expand...
Click to collapse
Same error as before
im downloading some other firmwares to try, but i dont think there is the problem :s
I've been having this issue for months now. It does that exact thing. Try removing the SIM card and starting the phone as normal and see what happens. If it starts then, we have the exact problem. Mine works perfectly WITHOUT the SIM card but....what's a phone without a SIM card right? I've tried putting the Stock ROM on to no avail as well. I think my thread about this is still somewhere around but I doubt anyone managed to solve the problem either.
If you do work something out post it back. Sorry I couldn't be much help.
E: just posting my thread http://forum.xda-developers.com/showthread.php?t=2778167