Database Develop

[Q] [Galaxy s I9000] After root with kernel CF-Root > BOOT LOOP!!

I tryed this guide to root the phone [Galaxy s I9000]
androidgalaxys.net/guide-modding-galaxy-s/guida-root-sicuro-galaxy-s-gingerbread/
It seem working but it restart continusly.
What can be the problem?
Here's the screenshot of ODIN process.

Can't find screenshot!
Probably u took the kernel for the wrong firmware....
Inviato dal mio SGS con XDA

diegalax said:
I tryed this guide to root the phone [Galaxy s I9000]
androidgalaxys.net/guide-modding-galaxy-s/guida-root-sicuro-galaxy-s-gingerbread/
It seem working but it restart continusly.
What can be the problem?
Here's the screenshot of ODIN process.
Click to expand...
Click to collapse
Do the following and after that root your phone using cf root xxjw4 kernel from Odin. Check in cf root for galaxy gti9000 thread .
gcuchiha said:
Maybe its a bootloop maybe.Switch off your phone and check if download and recovery mode is available(see next paragraph)
If so follow the steps mentioned.
First of all download xxjw4 firmware for galaxy gt-I9000 from
http://www.hotfile.com/dl/150483619/708026d/I9000XXJW4_I9000OXAJW4_XEU.zip.html
1) Put your phone into Recovery mode (Vol up + Home + Power button) and perform a Wipe data/Factory reset, then a Wipe cache. When done pull the battery out for around ten seconds then re-insert.
(If recovery isn't working ignore this step)
2) Put the phone into Download mode (Vol down + Home + Power button)
3) Unzip the JW4 firmware folder you've downloaded to your Desktop.
4) Launch Odin and click on the button that says PDA and navigate to the PDA file you've just unzipped to your desktop and select it.
5) Connect your phone to your PC via USB. Odin will say Added and a box will turn yellow to indicate it has recognised your phone.
6) Click the start button in Odin and sit back and wait for Odin to flash your phone. When it's finished it will take a few minutes longer for the phone to reboot than is usual so please don't panic. The phone will reboot.
7) When the phone has rebooted, remove the USB cable and you now have the latest 2.3.6. It might be a good idea to repeat step 1 to make sure nothing of the old firmware is left behind.
And that's it, seven steps to 2.3.6 JW4 Value Pack and TouchWiz 4.
In case you want more info about flashing go to this site
http://www.theandroidsoul.com/galaxy-s-gets-official-value-pack-firmware-xxjw4-includes-touchwiz-4/
Enjoy
Click to expand...
Click to collapse

First of all I feel your pain. If your issue hasn't been solved by the above post I would recommend these two step by step guides to fixing your issue.
http://forum.xda-developers.com/showthread.php?t=1494493
I have personally used the above process without a problem, best of all it includes all the files you need to not only get back to stock but also to then get you back to ICS.
http://forum.xda-developers.com/showthread.php?t=1139050 This process I haven't used but a cursory search pulled it up. The first link is better and I can vouch for it but variety is the spice of life..
Hope this helps.

hi , i did the data/ffactory reset but now it just turns on, where the S appears and then it comes out the t mobile ad and just come out a black screen and the home key buttons remain on wat can i do to fixed it

[Q] Boot loop, can't enter recovery mode.

So this morning I was using my phone as normal when it froze. Then I rebooted and it just stays bootlooping. I'm using a recent nightly of CM9 and I can't enter recovery mode to reflash the phone. How do I install CM9 using Odin? Is there any other software for that? I can enter download mode just fine.

gcuchiha said:
Maybe its a boot loop. Switch off your phone and check if download and recovery mode is available(see next paragraph).
If so follow the steps mentioned.
First of all download xxjw4 firmware for galaxy gt-I9000 from
http://www.hotfile.com/dl/150483619/708026d/I9000XXJW4_I9000OXAJW4_XEU.zip.html
1) Put your phone into Recovery mode (Vol up + Home + Power button) and perform a Wipe data/Factory reset, then a Wipe cache. When done pull the battery out for around ten seconds then re-insert.
(If recovery isn't working ignore this step)
2) Put the phone into Download mode (Vol down + Home + Power button)
3) Unzip the JW4 firmware folder you've downloaded to your Desktop.
4) Launch Odin and click on the button that says PDA and navigate to the PDA file you've just unzipped to your desktop and select it.
5) Connect your phone to your PC via USB. Odin will say Added and a box will turn yellow to indicate it has recognised your phone.
6) Click the start button in Odin and sit back and wait for Odin to flash your phone. When it's finished it will take a few minutes longer for the phone to reboot than is usual so please don't panic. The phone will reboot.
7) When the phone has rebooted, remove the USB cable and you now have the latest 2.3.6. It might be a good idea to repeat step 1 to make sure nothing of the old firmware is left behind.
And that's it, seven steps to 2.3.6 JW4 Value Pack and TouchWiz 4.
In case you want more info about flashing go to this site
http://www.theandroidsoul.com/galaxy-s-gets-official-value-pack-firmware-xxjw4-includes-touchwiz-4/
Enjoy
Click to expand...
Click to collapse
Follow this brother!

Could you give me a link to download ODIN? All links are broken and I don't have the program in my PC anymore.

http://dl.dropbox.com/u/13986183/I9003_Odin3 v1.82.exe

snapper.fishes said:
http://dl.dropbox.com/u/13986183/I9003_Odin3 v1.82.exe
Click to expand...
Click to collapse
Thanks.
But Odin doesn't recognize my phone, even after installing drivers.

frenadol said:
Thanks.
But Odin doesn't recognize my phone, even after installing drivers.
Click to expand...
Click to collapse
try different USB port. Or different USB cable. Or other computer.

[Q] Bricked or not

Hey guys,
I been looking for past few hours in this forum to find answers but cant.
Here is my problem.
Samsung Galaxy Note will not power on
It will go to download mode by pressing Vol down+home button and Power button.
I tried flashing few roms with Odin, seems to be all goes fine, but as soon phone restarts it stays on Samsung Galaxy Note screen. Also I get USB Not recognised on my PC when phone stack Samsung Galaxy Note screen.
Can please someone kindly explain to me step by step what to do to get it working.

bakili said:
Hey guys,
I been looking for past few hours in this forum to find answers but cant.
Here is my problem.
Samsung Galaxy Note will not power on
It will go to download mode by pressing Vol down+home button and Power button.
I tried flashing few roms with Odin, seems to be all goes fine, but as soon phone restarts it stays on Samsung Galaxy Note screen. Also I get USB Not recognised on my PC when phone stack Samsung Galaxy Note screen.
Can please someone kindly explain to me step by step what to do to get it working.
Click to expand...
Click to collapse
Flash abyss kernel. Get into abyss kernel by reboot into recovery and do a full wipe (wipe data/factory reset, wipe cache and wipe dalvik) then flash a rom of your choice.

Thanks
Can you give me link to abyss kernel please :good:

Sorry, also how to flash kernel
Sorry for many questions, i am new to this, but learning fast

If you are flashing in Odin bare in mind there are 2 pit files one for the 16gb and one for the 32gb versions of the phone. It wont boot if youve used the wrong pit file
Sent from my GT-N7000 using xda premium

I tried every possible option
Flashed abyss kernel
Flashed stock firmware
Flashed pit file
Still same as soon it boots in Galaxy Note screen i get error USB not recognised, cant access in to recovery also

It is same as mine....but after installing stock rom i just went to the phone recovery mode and wipe data & all that....then my phn restarted well...so i suggest u the same....;-)
Sent from my GT-S5570 using Tapatalk 2

Which stock firmware r u loading?
Sent from my GT-N7000 using xda premium

Rohan Pujari said:
It is same as mine....but after installing stock rom i just went to the phone recovery mode and wipe data & all that....then my phn restarted well...so i suggest u the same....;-)
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
I cant still enter in recovery mode
can enter download but not recovery

This what i flashed
CODE_N7000XXLC1_CL1003701_REV02_user_low_ship.tar
Dont know what to do with this files?
GT-N7000-MULTI-CSC-OXALC1.tar
MODEM_N7000XXLB2_REV_05_CL1106002.tar

bakili said:
I tried every possible option
Flashed abyss kernel
Flashed stock firmware
Flashed pit file
Still same as soon it boots in Galaxy Note screen i get error USB not recognised, cant access in to recovery also
Click to expand...
Click to collapse
Power off your Note.
Hold Volume down & Home & press Power button. Then when you see the Samsung logo, let go of the Power button. Your phone will boot into Odin/download mode. Press Volume up when asked to. Now you are in download mode.
Connect your phone with usb cable to your computer.
On your computer, run PC Odin. You should see a yellow highlighted COM sign. If you don’t, download Samsung Kies and install it. Then plug-out and plug-in the micro-USB cable to your Galaxy Note and you should see it.
Then click on PDA, and select the pit file then press start.

Sir my advice go to dr ketans thread find pre rooted gb rom for your country start from the begining flash it via pc odin be patient read everything carefully... It is described there...
Sent from my GT-N7000 using xda premium

tknguyencsu said:
Power off your Note.
Hold Volume down & Home & press Power button. Then when you see the Samsung logo, let go of the Power button. Your phone will boot into Odin/download mode. Press Volume up when asked to. Now you are in download mode.
Connect your phone with usb cable to your computer.
On your computer, run PC Odin. You should see a yellow highlighted COM sign. If you don’t, download Samsung Kies and install it. Then plug-out and plug-in the micro-USB cable to your Galaxy Note and you should see it.
Then click on PDA, and select the pit file then press start.
Click to expand...
Click to collapse
Bit confused buddy, as i cant see any pit files when click on PDA
I can see pit files only when I click on PIT

If its helps
In download mode
On top left corner it says
Product Name: GT-N7000
Custom Binary Download:No
Current Binary:Samsung Official

Then i suggest u to go to the service centre...;-)
Sent from my GT-S5570 using Tapatalk 2

There are lots of videos on youtube about pc odin
Shows what to do exactly try it
Sent from my GT-N7000 using xda premium

bakili said:
Bit confused buddy, as i cant see any pit files when click on PDA
I can see pit files only when I click on PIT
Click to expand...
Click to collapse
I think its because of selection there about partition or something like that
Sent from my GT-N7000 using xda premium

Will try later flash GB Rom
Bit strange , no errors when flashing , only when restarts after Odin flash my pc won't recognise usb drives
How to flash stock recovery?
Thanks for advice guys.
Sent from my GT-I9300 using Tapatalk 2

Tried GB stock rom, same installs fine through odin, but when phone restarts Samsung Galaxy Note starts up few seconds later get error on my pc that USB device not recognised
Also when connected with usb to pc, i have empty battery image on phone with circle in the middle

bakili said:
Tried GB stock rom, same installs fine through odin, but when phone restarts Samsung Galaxy Note starts up few seconds later get error on my pc that USB device not recognised
Also when connected with usb to pc, i have empty battery image on phone with circle in the middle
Click to expand...
Click to collapse
Change USB port, if not try having another cable.
Still not working? Hope phone's port is ok and not broken.
Sent from my GT-N7000 using Tapatalk 2

[Q] Flash CWM recovery on GT-19305?

Can it be done? How to do it?

through Odin. make sure it's for the i9305

The most recent CWM ported is in this thread, which also contains a link to Odin. Make sure Kies isn't running and that you have the right USB drivers, open Odin, put your phone in download mode (turn it off, then hold volume down + home while you turn it on again), connect your phone to your PC, and flash the .tar.md5 file as PDA.

1. First, download Odin from this link
Make sure you have the drivers for your phone installed. *If not download KIES from the Samsung site and install*
2. Plug your phone into the computer and start Odin.
3. Shutdown your phone and boot it in to download-mode by pressing Vol. down + home + power
4. Press the PDA-button in Odin and select your CWM-recovery file.
5. Make sure that Auto Reboot and F. Reset Time checkboxes are selected.
6. When flashing is done you will se a message "PASS" and your device should restart automatically.
Congratiulations, you now have CWM flashed on your phone
Here's a link to a CWM recovery flashable file if you not have one alreddy. LINK
Creds for the CWM-recovery file upload goes to codeworkx

I have flashed the cwm file through odin. It passed but when I go into recovery it is still the stock recovery and not cwm. Why?

I've gotten the same problem. So.. i flashed the recovery, but whej the phone restarted i shut it down without booting.(i removed the battery when the s3 lte screen showed up). Then i entered recovery and it worked. (S3 lte reflashes stock recovery and other stock things on stock kernel when booting). If you want permanent cwm recovery, flash a custom kernel! I hope this will help you!
Sent from my GT-I9305 using XDA Premium HD app

I used this one http://forum.xda-developers.com/showthread.php?t=2140681
Seems to work fine for me
Sean.

[Q] Bricked Galaxy tab p1000 ?

Hello,
I have a Galaxy tab p1000 which is bricked (I think).
I get this menu when it boots up: (I'm new here and posting links is not alowed for me )i.imgur.com/1a0unwF.jpg
None of the options work.
I can't get my pc to recognize the device though. So flashing something with Odin or Heimdall doesn't seem to work.
Do you think this is fixable?
Help will be much appreciated,
Thanks

Can you boot to download mode?
(From off state, hold Vol-Down arrow, then press power button until the screen lights up. Then let go of power but hold on to Vol down).
In download mode, if Odin/heimdall detects, then flash stock rom.
For example, use Overcome method linked to in my signature.
Make sure yours is P1000 for that to work.

priyana said:
Can you boot to download mode?
(From off state, hold Vol-Down arrow, then press power button until the screen lights up. Then let go of power but hold on to Vol down).
In download mode, if Odin/heimdall detects, then flash stock rom.
For example, use Overcome method linked to in my signature.
Make sure yours is P1000 for that to work.
Click to expand...
Click to collapse
I can put the tab in download mode. When I open Heimdall -Utilities- Detect Device->Detect
It says Device detected. But Odin doesn't detect it.

Reinstall USB driver that is for Odin
Sent from my GT-N7100 using xda app-developers app

Ok. So Odin recognizes the tablet now. I tried to flash stock rom but it didn't work. The tablet restarted and the same menu popped up.

That is Odin with PIT file and repartition.
Sent from my GT-P1000 using xda app-developers app

I tried reflashing several times with Odin 1.7, gt-p1000_mr.pit in pit and the
P1000XWJQ8_P1000PROJQ1_P1000XXJPZ_HOME.tar.md5 file in pda
I keep getting the same error E: failed to mount /data

Okay. So I reflashed it this time using your GB-Stock-Safe-v5 files and it worked.
I can't believe it. Thank you so much for this.