Database Develop

fix bricked cappy

i had to do the 3 resisitor home made trick to get the download shovel guy back but what do i wipe it with to put new rom on?

Wipe it with ODIN. This will get you back to stock AT&T build. You can then follow the steps on this tutorial to install a new ROM:
http://forum.xda-developers.com/showthread.php?t=884364
The download for ODIN is in that page.

Frank the Funkasaurus Rex said:
Wipe it with ODIN. This will get you back to stock AT&T build. You can then follow the steps on this tutorial to install a new ROM:
http://forum.xda-developers.com/showthread.php?t=884364
The download for ODIN is in that page.
Click to expand...
Click to collapse
odin first hung forever at processing files then finaly 1 time it finaly went past that and said looking at pit files and sat there forever i unplugged usb now when i plug back in pc doesnt see it or odin or anything but the shovel guy is still on screen

are you using ODIN 1 click or the original ODIN where you have to select the PIT and PDA files you want to flash?
are you starting ODIN first, before you plug in your phone and running as admin?

just tried as admin with odin execution v1.00 plugged in after odin was open no go

no go as in ODIN doesn't recognize your phone?

From what I understand, you tried the first flash and it got to the PIT file and then you unplugged it once it froze. Since then, you haven't rebooted your phone.
One thing first: You cannot plug your phone in after it is in Download mode and have Odin work. You must put your phone into Download mode after both Odin is open and the phone is plugged in.
Now; to get your phone into download mode.
Unplug the phone from the computer and remove the battery, SIM, and external SD if there is one.
1. Open Odin one click.
2. Plug the phone in (without the battery in the phone). Do not press any buttons, especially the power button.
3. Press and hold the volume rocker (holding down both volume up and down).
4. Insert the battery while holding the volume rocker.
5. The phone should boot into download mode. You can then let go of the volume rocker.
Now wait 30 seconds (if you press "Start" too soon, it will not work). Then press "Start" and your flash should finish.

im in downloader mode now but on captivate all in one or just odin exeuction 1.00 it hangs at examing files

dont ask me how, because im not even sure how i did it but after much trial and error im back in the saddle again, flashed back to stock, then put paragon 6 on so im all set again...

[Q] [Galaxy s I9000] After root with kernel CF-Root > BOOT LOOP!!

I tryed this guide to root the phone [Galaxy s I9000]
androidgalaxys.net/guide-modding-galaxy-s/guida-root-sicuro-galaxy-s-gingerbread/
It seem working but it restart continusly.
What can be the problem?
Here's the screenshot of ODIN process.

Can't find screenshot!
Probably u took the kernel for the wrong firmware....
Inviato dal mio SGS con XDA

diegalax said:
I tryed this guide to root the phone [Galaxy s I9000]
androidgalaxys.net/guide-modding-galaxy-s/guida-root-sicuro-galaxy-s-gingerbread/
It seem working but it restart continusly.
What can be the problem?
Here's the screenshot of ODIN process.
Click to expand...
Click to collapse
Do the following and after that root your phone using cf root xxjw4 kernel from Odin. Check in cf root for galaxy gti9000 thread .
gcuchiha said:
Maybe its a bootloop maybe.Switch off your phone and check if download and recovery mode is available(see next paragraph)
If so follow the steps mentioned.
First of all download xxjw4 firmware for galaxy gt-I9000 from
http://www.hotfile.com/dl/150483619/708026d/I9000XXJW4_I9000OXAJW4_XEU.zip.html
1) Put your phone into Recovery mode (Vol up + Home + Power button) and perform a Wipe data/Factory reset, then a Wipe cache. When done pull the battery out for around ten seconds then re-insert.
(If recovery isn't working ignore this step)
2) Put the phone into Download mode (Vol down + Home + Power button)
3) Unzip the JW4 firmware folder you've downloaded to your Desktop.
4) Launch Odin and click on the button that says PDA and navigate to the PDA file you've just unzipped to your desktop and select it.
5) Connect your phone to your PC via USB. Odin will say Added and a box will turn yellow to indicate it has recognised your phone.
6) Click the start button in Odin and sit back and wait for Odin to flash your phone. When it's finished it will take a few minutes longer for the phone to reboot than is usual so please don't panic. The phone will reboot.
7) When the phone has rebooted, remove the USB cable and you now have the latest 2.3.6. It might be a good idea to repeat step 1 to make sure nothing of the old firmware is left behind.
And that's it, seven steps to 2.3.6 JW4 Value Pack and TouchWiz 4.
In case you want more info about flashing go to this site
http://www.theandroidsoul.com/galaxy-s-gets-official-value-pack-firmware-xxjw4-includes-touchwiz-4/
Enjoy
Click to expand...
Click to collapse

First of all I feel your pain. If your issue hasn't been solved by the above post I would recommend these two step by step guides to fixing your issue.
http://forum.xda-developers.com/showthread.php?t=1494493
I have personally used the above process without a problem, best of all it includes all the files you need to not only get back to stock but also to then get you back to ICS.
http://forum.xda-developers.com/showthread.php?t=1139050 This process I haven't used but a cursory search pulled it up. The first link is better and I can vouch for it but variety is the spice of life..
Hope this helps.

hi , i did the data/ffactory reset but now it just turns on, where the S appears and then it comes out the t mobile ad and just come out a black screen and the home key buttons remain on wat can i do to fixed it

[Q] Need A Genius ! my Galaxy s1 doesn't power up !

my Galaxy s1 doesn't power up !
When i power it up he show the logo and then turn off
video:
youtube.com/watch?v=h5bX9LksF3k

Can you get it into download mode without it turning off? (Hold volume down + home button + power) Or recovery? (Hold volume up + home button + power?) Is it rooted with clockwork mode?
Sent from my GT-I9000 using xda premium

Maybe its a boot loop. Switch off your phone and check if download and recovery mode is available(see next paragraph).
If so follow the steps mentioned.
First of all download xxjw4 firmware for galaxy gt-I9000 from
http://www.hotfile.com/dl/150483619/708026d/I9000XXJW4_I9000OXAJW4_XEU.zip.html
1) Put your phone into Recovery mode (Vol up + Home + Power button) and perform a Wipe data/Factory reset, then a Wipe cache. When done pull the battery out for around ten seconds then re-insert.
(If recovery isn't working ignore this step)
2) Put the phone into Download mode (Vol down + Home + Power button)
3) Unzip the JW4 firmware folder you've downloaded to your Desktop.
4) Launch Odin and click on the button that says PDA and navigate to the PDA file you've just unzipped to your desktop and select it.
5) Connect your phone to your PC via USB. Odin will say Added and a box will turn yellow to indicate it has recognised your phone.
6) Click the start button in Odin and sit back and wait for Odin to flash your phone. When it's finished it will take a few minutes longer for the phone to reboot than is usual so please don't panic. The phone will reboot.
7) When the phone has rebooted, remove the USB cable and you now have the latest 2.3.6. It might be a good idea to repeat step 1 to make sure nothing of the old firmware is left behind.
And that's it, seven steps to 2.3.6 JW4 Value Pack and TouchWiz 4.
In case you want more info about flashing go to this site
http://www.theandroidsoul.com/galaxy-s-gets-official-value-pack-firmware-xxjw4-includes-touchwiz-4/
Enjoy

idon't have a recovery the phone isn't root and but i can get to the download mod !
still i tried what you said with the odin and it doesnt work
the phone wasn't root before and had a stock from the operator

If its a boot loop try this thread http://forum.xda-developers.com/showthread.php?t=984140
If not download the files from sammobile (2.3.6 xxjw4) put the .tar file in the PDA and 512 pit file in the pit section make sure the repartition is ticked then if it still in a boot loop search for the cfs root and flash that then get the file off the thread I gave you then flash that to the phone as instructed on the thread then your phone should work edit* you need to put your phone into download mode before plugging in and flashing
Sent from my GT-I9000 using xda premium

calum96 said:
If its a boot loop try this thread http://forum.xda-developers.com/showthread.php?t=984140
If not download the files from sammobile (2.3.6 xxjw4) put the .tar file in the PDA and 512 pit file in the pit section make sure the repartition is ticked then if it still in a boot loop search for the cfs root and flash that then get the file off the thread I gave you then flash that to the phone as instructed on the thread then your phone should work edit* you need to put your phone into download mode before plugging in and flashing
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
yeah i know the basics ! but stil it doesnt work ! can it be a hardware problem? and if it right how can i fix it ?

Did you try that method? And when did it start turning off, did you try mpding it or did it just start doing it? Does it he a knock when it turns off or is it at the same place everytime? If it stays turned on in download mode its probably software related also make sure the drivers are installed using kies
Sent from my GT-I9000 using xda premium

yizhak722 said:
idon't have a recovery the phone isn't root and but i can get to the download mod !
still i tried what you said with the odin and it doesnt work
the phone wasn't root before and had a stock from the operator
Click to expand...
Click to collapse
Does Odin recognize your phone (com12 or something like that in yellow)
If not then try different USB port or also different cable and computer.
According to my experience if you are able to go to download mode then there is always a way to fix the problem

[Q] No recovery mode after failed OTA - Note N7000

Hi guys - I have had a mini disaster with my Note and desperate for some expert advice.
Basically last night I ran the official ICS OTA it downloaded great, I left it plugged into the power and ran the update as I slept. I woke up this morning to find the battery flat, guessing a charging issue I used my external charger to charge the battery. Now, the phone is stuck in some kind of boot loop - It passes the Samsung splash screen to a black screen with the Android Robot with it's belly full of spiraling triangles. That hangs for 30 seconds then it restarts and does the same thing over and over again.
I can not enter recovery mode - vol up + home + power doesn't work but I can enter the download ODIN screen.
Any ideas what I can do?

redbarra1 said:
Hi guys - I have had a mini disaster with my Note and desperate for some expert advice.
Basically last night I ran the official ICS OTA it downloaded great, I left it plugged into the power and ran the update as I slept. I woke up this morning to find the battery flat, guessing a charging issue I used my external charger to charge the battery. Now, the phone is stuck in some kind of boot loop - It passes the Samsung splash screen to a black screen with the Android Robot with it's belly full of spiraling triangles. That hangs for 30 seconds then it restarts and does the same thing over and over again.
I can not enter recovery mode - vol up + home + power doesn't work but I can enter the download ODIN screen.
Any ideas what I can do?
Click to expand...
Click to collapse
simply flash the rom once again.. if you can manage to enter recovery then do a full a wipe and reflash the rom

Mayank Chandwani said:
simply flash the rom once again.. if you can manage to enter recovery then do a full a wipe and reflash the rom
Click to expand...
Click to collapse
Thanks Mayank - do you know of a tutorial to take me through this process - I am a complete novice very nervous of screwing it up.

redbarra1 said:
Thanks Mayank - do you know of a tutorial to take me through this process - I am a complete novice very nervous of screwing it up.
Click to expand...
Click to collapse
1. Go to sammobile.com and download latest firmware.
2. Search for pc odin and download and install it on your laptop or computer.
3. Unzip the firmware to get a md5 tar file.
4. Put ur note in download mode and connect it to ur pc.
5. Pc odin should show ur phone connected in yellow or orange logo. Make sure u have kies installed before this.
6. Click on pda in odin and select the unzipped file and hit start.
7. Wait untill the phone reboots

Mayank Chandwani said:
1. Go to sammobile.com and download latest firmware.
2. Search for pc odin and download and install it on your laptop or computer.
3. Unzip the firmware to get a md5 tar file.
4. Put ur note in download mode and connect it to ur pc.
5. Pc odin should show ur phone connected in yellow or orange logo. Make sure u have kies installed before this.
6. Click on pda in odin and select the unzipped file and hit start.
7. Wait untill the phone reboots
Click to expand...
Click to collapse
That's awesome - just one final question: you say I need kies, what part does that play? For the life of me I have never got it talking with my Note.

redbarra1 said:
That's awesome - just one final question: you say I need kies, what part does that play? For the life of me I have never got it talking with my Note.
Click to expand...
Click to collapse
without kies..odin won't recognize the device.. kies is the driver for the device

you can also use Samsung USB drivers
http://developer.samsung.com/android/tools-sdks/Samsung-Andorid-USB-Driver-for-Windows

[TUT] How to root and un-root GT-I9305 on KitKat 4.4.4.

I'M NOT RESPONSIBLE IF YOUR PHONE GOT BRICKED, DO THIS AT YOUR OWN RISK!
ROOTING (CUSTOM RECOVERY + SUPERSU)​
MAKE SURE YOUR PHONE’S 80% CHARGE OR ABOVE!!!
1) Download Odin.
LINK: https://www.dropbox.com/s/fivpr9btf6667hr/Odin 3.07.rar?dl=0
Download “philz_touch_6.26.6-i9305.tar”
LINK: http://goo.im/devs/mskip/recovery/samsung_galaxy_s3/philz_touch_6.26.6-i9305.tar.md5/
2) Unzip Odin to your desktop.
Copy the “philz_touch_6.26.6-i9305.tar” to the same directory.
3) Make sure your phone is in DOWNLOAD MODE.
Power OFF your phone if you haven't done so.
Press Volume Down + Home Button + Power Button.
You will see a screen saying “Warning!”
Just ignore what it says and PRESS the Volume Up button.
4) Now, connect the phone to your Windows computer/laptop.
Connect the USB cable to your phone first then to your computer.
Let it detect your phone.
5) If Kies is running on your pc shut it down.
6) Open the Odin application.
7) In the Message Box (located at the bottom left corner of Odin), you should see "Added!!" there.
8) Choose PDA button and select the "philz_touch_6.26.6-i9305.tar".
9) Now, click on START. Your phone will be flashed and reboot when it is finished.
10) After rebooting, copy “UPDATE-SuperSU-v2.02” to your SD Card.
LINK: http://download.chainfire.eu/452/SuperSU/UPDATE-SuperSU-v2.02.zip
11) Power it off again.
12) Put the phone in recovery mode.
Hold down Power, Volume Up and Home when the device is turned off and unplugged and release once you see the Samsung logo.
13) After that you can flash the “UPDATE-SuperSU-v2.02” to be ROOTED to any firmware.
UN-ROOTING USING PC ODIN​
MAKE SURE YOUR PHONE’S 80% CHARGE OR ABOVE!!!
1) Make sure your phone is in DOWNLOAD MODE.
Power OFF your phone if you haven't done so.
Press Volume Down + Home Button + Power Button.
You will see a screen saying “Warning!”
Just ignore what it says and PRESS the Volume Up button.
2) Now, connect the phone to your Windows computer/laptop.
Connect the USB cable to your phone first then to your computer.
Let it detect your phone.
3) Extract both files (Odin & Stock Rom) to your Desktop.
Double-click on the Odin executable file and it’ll launch.
4) In the Odin, click on PDA tab and select the Stock Firmware file you extracted to your Desktop.
5) Make sure only Auto Reboot and F. Reset Time boxes are checked in the Odin.
6) Click on Start button in the Odin and leave the rest of the work on the tool.
Your device should reboot once flashing’s done.
7) You have successfully un-rooted your S3!
USING MOBILE ODIN​
1) Ensure you’re having root access using “Root Checker”.
2) Copy the Stock Firmware file to your SD Card.
3) Install Mobile Odin APK and open it.
4) Choose “Open File…”
5) Navigate to where you put the Stock Firmware and choose it.
6) Now scroll down till you see “Ever Root” and uncheck it.
7) Now tap “Flash Firmware”, you’re phone will restart and start flashing.
8) After flashing is done it’ll reboot.
9) You have successfully un-rooted your S3!
Credit goes to @SeyMedia for original aid, I just made this into a tutorial. Good Luck!:good:

root/recovery won't work that way for 4.4
as soon as you let the phone reboot into system after flashing custom recovery, it will get overwritten by original one; so after you turn the phone off and reboot manually then, don't be surprised to see stock recovery

After flashing custom recovery don't turn the phone on. Just return with 3combo to recovery and flash su. This is how worked for me

Regarding the rooting process:
- just untick F. Reset Time in Odin when you flash philz_touch_6.26.6-i9305.tar;
- when flashing is done, disconnect phone from pc and pull up the battery for a few seconds;
- put back the battery;
- enter in recovery mode (you will enter in Philz Touch);
- flash UPDATE-SuperSU-v2.02.
This will do the trick!

SeyMedia said:
Regarding the rooting process:
- flash UPDATE-SuperSU-v2.02.
This will do the trick!
Click to expand...
Click to collapse
I downloaed SuperSU 2.02 two times from official site, but it didn't want to flash...
I think it is corrputed. After that i downloaded 1.96 and it worked.
yozo

yozotheboss said:
I downloaed SuperSU 2.02 two times from official site, but it didn't want to flash...
I think it is corrputed. After that i downloaded 1.96 and it worked.
yozo
Click to expand...
Click to collapse
I used this downloaded from official site a few months ago and it worked.

Why you use “philz_touch_6.26.6-i9305.tar” and not more new "philz_touch_6.48.4-i9305.tar"?

psychok9 said:
Why you use “philz_touch_6.26.6-i9305.tar” and not more new "philz_touch_6.48.4-i9305.tar"?
Click to expand...
Click to collapse
I used this and i didn't checked if is a new version when i talked with Yousef Khashaba.

Do you have to use a custom recovery to root kk 4.4.4 or can I just use CF-auto root and triangle away with the stock recovery?

going to test .. any one know chainfire cf-root works for i9305 or not ?

afraaa said:
going to test .. any one know chainfire cf-root works for i9305 or not ?
Click to expand...
Click to collapse
Yes it works pefectly

Raistlin1158 said:
Yes it works pefectly
Click to expand...
Click to collapse
i mean .. chainfire has i9305N for kitkat 4.4.4 ... we have i9305 no N no T ... just 9305 .. can i use 9305N for root ? they are sharing same CPU . different is software build number .. what do u suggest man .. appreciate your answer and w8 for your answer
---------- Post added at 10:44 PM ---------- Previous post was at 10:44 PM ----------
PS : sry thanks button reach limit will give it tomorow . do u suggest i use chainfire or this method ?

i guess above question answer is no ...
about this OPS method : confirming root on GT-i9305 model running kitkat 4.4.4 ?