Hello,
I have a Galaxy tab p1000 which is bricked (I think).
I get this menu when it boots up: (I'm new here and posting links is not alowed for me )i.imgur.com/1a0unwF.jpg
None of the options work.
I can't get my pc to recognize the device though. So flashing something with Odin or Heimdall doesn't seem to work.
Do you think this is fixable?
Help will be much appreciated,
Thanks
Can you boot to download mode?
(From off state, hold Vol-Down arrow, then press power button until the screen lights up. Then let go of power but hold on to Vol down).
In download mode, if Odin/heimdall detects, then flash stock rom.
For example, use Overcome method linked to in my signature.
Make sure yours is P1000 for that to work.
priyana said:
Can you boot to download mode?
(From off state, hold Vol-Down arrow, then press power button until the screen lights up. Then let go of power but hold on to Vol down).
In download mode, if Odin/heimdall detects, then flash stock rom.
For example, use Overcome method linked to in my signature.
Make sure yours is P1000 for that to work.
Click to expand...
Click to collapse
I can put the tab in download mode. When I open Heimdall -Utilities- Detect Device->Detect
It says Device detected. But Odin doesn't detect it.
Reinstall USB driver that is for Odin
Sent from my GT-N7100 using xda app-developers app
Ok. So Odin recognizes the tablet now. I tried to flash stock rom but it didn't work. The tablet restarted and the same menu popped up.
That is Odin with PIT file and repartition.
Sent from my GT-P1000 using xda app-developers app
I tried reflashing several times with Odin 1.7, gt-p1000_mr.pit in pit and the
P1000XWJQ8_P1000PROJQ1_P1000XXJPZ_HOME.tar.md5 file in pda
I keep getting the same error E: failed to mount /data
Okay. So I reflashed it this time using your GB-Stock-Safe-v5 files and it worked.
I can't believe it. Thank you so much for this.
Related
so I installed a custom kernel and it the voltage app said my kernel wasn't compatible so I shut it off to try a reboot. Now when I turn it on its stuck on the Samsung splash screen. If I press and hold volume down and power I can get to the "downloading screen but when I try to flash the zip aligned and deodexed tar for Verizon Odin errors and shuts down. I am using the P1 pit. Any help would be appreciated
When using ODIN, just flash the pda file. No pit file or anything. See if that works.
I finally fixed it I guess HEIMDALL is vary picky when it comes to what USB port you use
Sent from my SCH-I800 using Tapatalk
I'm in a similar situation. Battery ran out during Odin process. Now it won't acknowledge the Tab when plugged in. I've put it on charge but still nothing.
Is there any way I can solve this? When I push the power button and down, nothing happens.
Whats the best way to obtain root with out using ODIN??? Right now I cant get into ODIN because the power button is not functional. I tried to use the one click root but they didnt work. Kept getting stuck at step 7. I want root so I can use quick boot to reboot in to download mode. I tried to use the modifed 3e recovery but the batch kept giving me a fail. The thread said I didnt need to be rooted but when it looked for root it would just hang. So that didnt work either. Kind of stuck at this point of how to obtain root w/o odin. Its using offical ATT OTA 2.3.5 update. Never been rooted before. Thanks for the help.
To root gingerbread, you need to use the fugu kernel swap method. A simple search/looking through stickies will point you in the right direction. You will be using Odin, but you don't need to touch the power button. With the phone powered off,hold down both volume buttons and plug in a USB cable. You should be in download mode at that point
Sent from my CM9 ICS i897 Captivate
you dont need root to get into download mode... we dont use quick boot on captivate...
cant get into odin because no power button??? WTF... odin is on your computer. no power button required...
download mode.... no power button required...
so why do you THINK you need root?
korockinout13 said:
To root gingerbread, you need to use the fugu kernel swap method. A simple search/looking through stickies will point you in the right direction. You will be using Odin, but you don't need to touch the power button. With the phone powered off,hold down both volume buttons and plug in a USB cable. You should be in download mode at that point
Sent from my CM9 ICS i897 Captivate
Click to expand...
Click to collapse
Yes I read that the power button is not required but when I hold the volumes down it doesn't go into download mode. It goes in yo Android recovery (3e). Not sure what I'm doing wrong but I've been getting the same responses.. One click root don't work. Also when I pull battery ( to turn off phone) and pit it back in and hold the volumes up and down that's when I get in to the 3e recovery. Odin doesn't detect so I can't flash using Odin in this recovery. Thanks for the help but this phone was hard to root or get in download mode with the power button not working..he got an upgrade maybe I'll tell him to just get the galaxy note
Sent from my SCH-I510 using XDA
TRusselo said:
you dont need root to get into download mode... we dont use quick boot on captivate...
cant get into odin because no power button??? WTF... odin is on your computer. no power button required...
download mode.... no power button required...
so why do you THINK you need root?
Click to expand...
Click to collapse
Ppl keep saying that but hasn't worked for me. That combo just gets me into Android recovery 3e..i have read somewhrre that you should still beale to flash but Odin doesn't recognize so that's not an option...thanks for help anyway
Btw: the phone doesn't stay powered off. As soon as I put the battery in it turns on. With the cord in the phone and pressing the volume combo during that boot up it takes me recovery 3e
Sent from my SCH-I510 using XDA
How about using "adb reboot download"?
Or maybe one of these other method:
http://samsungcaptivate.wikia.com/wiki/Putting_the_Phone_into_Download_Mode
Sent from my SAMSUNG-SGH-I897 using XDA
jager420 said:
.i have read somewhrre that you should still beale to flash but Odin doesn't recognize so that's not an option.
Click to expand...
Click to collapse
recovery cannot be used as download mode. the soft brick screen can... PHONE /!\ PC screen.
when you updated your phone to gingerbread did you flash the captivate bootloaders or the i9000 bootloaders????
i9000 bootloaders could be your problem. download mode button combo uses power and vol dn
jager420 said:
Yes I read that the power button is not required but when I hold the volumes down it doesn't go into download mode. It goes in yo Android recovery (3e). Not sure what I'm doing wrong but I've been getting the same responses.. One click root don't work. Also when I pull battery ( to turn off phone) and pit it back in and hold the volumes up and down that's when I get in to the 3e recovery. Odin doesn't detect so I can't flash using Odin in this recovery. Thanks for the help but this phone was hard to root or get in download mode with the power button not working..he got an upgrade maybe I'll tell him to just get the galaxy note
Sent from my SCH-I510 using XDA
Click to expand...
Click to collapse
Not sure if you've tried this, but take out the battery, hold volume buttons, insert usb, then insert battery.
It would seem that the problem is in the broken power button...it's pressed all the time, so when using the correct button combo for download mode, it doesn't work because of the power button always being pressed.
Op, rooting your phone won't fix your power Button.
You could install Android sdk, and use adb to boot into download fwiw....
You should check out mobiletechvideos.com they offer a power button replacement service.
my Galaxy s1 doesn't power up !
When i power it up he show the logo and then turn off
video:
youtube.com/watch?v=h5bX9LksF3k
Can you get it into download mode without it turning off? (Hold volume down + home button + power) Or recovery? (Hold volume up + home button + power?) Is it rooted with clockwork mode?
Sent from my GT-I9000 using xda premium
Maybe its a boot loop. Switch off your phone and check if download and recovery mode is available(see next paragraph).
If so follow the steps mentioned.
First of all download xxjw4 firmware for galaxy gt-I9000 from
http://www.hotfile.com/dl/150483619/708026d/I9000XXJW4_I9000OXAJW4_XEU.zip.html
1) Put your phone into Recovery mode (Vol up + Home + Power button) and perform a Wipe data/Factory reset, then a Wipe cache. When done pull the battery out for around ten seconds then re-insert.
(If recovery isn't working ignore this step)
2) Put the phone into Download mode (Vol down + Home + Power button)
3) Unzip the JW4 firmware folder you've downloaded to your Desktop.
4) Launch Odin and click on the button that says PDA and navigate to the PDA file you've just unzipped to your desktop and select it.
5) Connect your phone to your PC via USB. Odin will say Added and a box will turn yellow to indicate it has recognised your phone.
6) Click the start button in Odin and sit back and wait for Odin to flash your phone. When it's finished it will take a few minutes longer for the phone to reboot than is usual so please don't panic. The phone will reboot.
7) When the phone has rebooted, remove the USB cable and you now have the latest 2.3.6. It might be a good idea to repeat step 1 to make sure nothing of the old firmware is left behind.
And that's it, seven steps to 2.3.6 JW4 Value Pack and TouchWiz 4.
In case you want more info about flashing go to this site
http://www.theandroidsoul.com/galaxy-s-gets-official-value-pack-firmware-xxjw4-includes-touchwiz-4/
Enjoy
idon't have a recovery the phone isn't root and but i can get to the download mod !
still i tried what you said with the odin and it doesnt work
the phone wasn't root before and had a stock from the operator
If its a boot loop try this thread http://forum.xda-developers.com/showthread.php?t=984140
If not download the files from sammobile (2.3.6 xxjw4) put the .tar file in the PDA and 512 pit file in the pit section make sure the repartition is ticked then if it still in a boot loop search for the cfs root and flash that then get the file off the thread I gave you then flash that to the phone as instructed on the thread then your phone should work edit* you need to put your phone into download mode before plugging in and flashing
Sent from my GT-I9000 using xda premium
calum96 said:
If its a boot loop try this thread http://forum.xda-developers.com/showthread.php?t=984140
If not download the files from sammobile (2.3.6 xxjw4) put the .tar file in the PDA and 512 pit file in the pit section make sure the repartition is ticked then if it still in a boot loop search for the cfs root and flash that then get the file off the thread I gave you then flash that to the phone as instructed on the thread then your phone should work edit* you need to put your phone into download mode before plugging in and flashing
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
yeah i know the basics ! but stil it doesnt work ! can it be a hardware problem? and if it right how can i fix it ?
Did you try that method? And when did it start turning off, did you try mpding it or did it just start doing it? Does it he a knock when it turns off or is it at the same place everytime? If it stays turned on in download mode its probably software related also make sure the drivers are installed using kies
Sent from my GT-I9000 using xda premium
yizhak722 said:
idon't have a recovery the phone isn't root and but i can get to the download mod !
still i tried what you said with the odin and it doesnt work
the phone wasn't root before and had a stock from the operator
Click to expand...
Click to collapse
Does Odin recognize your phone (com12 or something like that in yellow)
If not then try different USB port or also different cable and computer.
According to my experience if you are able to go to download mode then there is always a way to fix the problem
Hey guys,
I been looking for past few hours in this forum to find answers but cant.
Here is my problem.
Samsung Galaxy Note will not power on
It will go to download mode by pressing Vol down+home button and Power button.
I tried flashing few roms with Odin, seems to be all goes fine, but as soon phone restarts it stays on Samsung Galaxy Note screen. Also I get USB Not recognised on my PC when phone stack Samsung Galaxy Note screen.
Can please someone kindly explain to me step by step what to do to get it working.
bakili said:
Hey guys,
I been looking for past few hours in this forum to find answers but cant.
Here is my problem.
Samsung Galaxy Note will not power on
It will go to download mode by pressing Vol down+home button and Power button.
I tried flashing few roms with Odin, seems to be all goes fine, but as soon phone restarts it stays on Samsung Galaxy Note screen. Also I get USB Not recognised on my PC when phone stack Samsung Galaxy Note screen.
Can please someone kindly explain to me step by step what to do to get it working.
Click to expand...
Click to collapse
Flash abyss kernel. Get into abyss kernel by reboot into recovery and do a full wipe (wipe data/factory reset, wipe cache and wipe dalvik) then flash a rom of your choice.
Thanks
Can you give me link to abyss kernel please :good:
Sorry, also how to flash kernel
Sorry for many questions, i am new to this, but learning fast
If you are flashing in Odin bare in mind there are 2 pit files one for the 16gb and one for the 32gb versions of the phone. It wont boot if youve used the wrong pit file
Sent from my GT-N7000 using xda premium
I tried every possible option
Flashed abyss kernel
Flashed stock firmware
Flashed pit file
Still same as soon it boots in Galaxy Note screen i get error USB not recognised, cant access in to recovery also
It is same as mine....but after installing stock rom i just went to the phone recovery mode and wipe data & all that....then my phn restarted well...so i suggest u the same....;-)
Sent from my GT-S5570 using Tapatalk 2
Which stock firmware r u loading?
Sent from my GT-N7000 using xda premium
Rohan Pujari said:
It is same as mine....but after installing stock rom i just went to the phone recovery mode and wipe data & all that....then my phn restarted well...so i suggest u the same....;-)
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
I cant still enter in recovery mode
can enter download but not recovery
This what i flashed
CODE_N7000XXLC1_CL1003701_REV02_user_low_ship.tar
Dont know what to do with this files?
GT-N7000-MULTI-CSC-OXALC1.tar
MODEM_N7000XXLB2_REV_05_CL1106002.tar
bakili said:
I tried every possible option
Flashed abyss kernel
Flashed stock firmware
Flashed pit file
Still same as soon it boots in Galaxy Note screen i get error USB not recognised, cant access in to recovery also
Click to expand...
Click to collapse
Power off your Note.
Hold Volume down & Home & press Power button. Then when you see the Samsung logo, let go of the Power button. Your phone will boot into Odin/download mode. Press Volume up when asked to. Now you are in download mode.
Connect your phone with usb cable to your computer.
On your computer, run PC Odin. You should see a yellow highlighted COM sign. If you don’t, download Samsung Kies and install it. Then plug-out and plug-in the micro-USB cable to your Galaxy Note and you should see it.
Then click on PDA, and select the pit file then press start.
Sir my advice go to dr ketans thread find pre rooted gb rom for your country start from the begining flash it via pc odin be patient read everything carefully... It is described there...
Sent from my GT-N7000 using xda premium
tknguyencsu said:
Power off your Note.
Hold Volume down & Home & press Power button. Then when you see the Samsung logo, let go of the Power button. Your phone will boot into Odin/download mode. Press Volume up when asked to. Now you are in download mode.
Connect your phone with usb cable to your computer.
On your computer, run PC Odin. You should see a yellow highlighted COM sign. If you don’t, download Samsung Kies and install it. Then plug-out and plug-in the micro-USB cable to your Galaxy Note and you should see it.
Then click on PDA, and select the pit file then press start.
Click to expand...
Click to collapse
Bit confused buddy, as i cant see any pit files when click on PDA
I can see pit files only when I click on PIT
If its helps
In download mode
On top left corner it says
Product Name: GT-N7000
Custom Binary Download:No
Current Binary:Samsung Official
Then i suggest u to go to the service centre...;-)
Sent from my GT-S5570 using Tapatalk 2
There are lots of videos on youtube about pc odin
Shows what to do exactly try it
Sent from my GT-N7000 using xda premium
bakili said:
Bit confused buddy, as i cant see any pit files when click on PDA
I can see pit files only when I click on PIT
Click to expand...
Click to collapse
I think its because of selection there about partition or something like that
Sent from my GT-N7000 using xda premium
Will try later flash GB Rom
Bit strange , no errors when flashing , only when restarts after Odin flash my pc won't recognise usb drives
How to flash stock recovery?
Thanks for advice guys.
Sent from my GT-I9300 using Tapatalk 2
Tried GB stock rom, same installs fine through odin, but when phone restarts Samsung Galaxy Note starts up few seconds later get error on my pc that USB device not recognised
Also when connected with usb to pc, i have empty battery image on phone with circle in the middle
bakili said:
Tried GB stock rom, same installs fine through odin, but when phone restarts Samsung Galaxy Note starts up few seconds later get error on my pc that USB device not recognised
Also when connected with usb to pc, i have empty battery image on phone with circle in the middle
Click to expand...
Click to collapse
Change USB port, if not try having another cable.
Still not working? Hope phone's port is ok and not broken.
Sent from my GT-N7000 using Tapatalk 2
Hello everyone,
I've been using this community for a while, but this is my first post. One or two months ago I successfully rooted my Samsung Galaxy Ace S5830 and installed Imaginary ICS Final along with CWM Recovery 5.0.2.6. Everything worked fine but today I decided to update to a 4.4 custom rom. I installed CM 11 from this post http://forum.xda-developers.com/showthread.php?t=2659269, but after selecting my language a popup apeared which said "The setup aplication has stopped working", so I looked for another ROM. I found this one http://forum.xda-developers.com/showthread.php?t=2684893, but it required TWRP Recovery to be installed. I downloaded it, copied it to my SD and tried to install it form CWM 5.0.2.6.
Now, my phone goes into a blue screen whether I try to boot normally or into the recovery menu and I don't now how to solve it. Since I can boot into download mode, I've tried using Odin, but it doesn't recognize my phone. Can anyone help me, please? Thanks a lot in advance.
PS: I'm using Windows 8.1 x64.
EDIT: Now Odin recognizes it, but it gets stuck in "<1> setup connection...".
EDIT 2: I've solved it flashing through Odin with a PC running a clean installation of Windows 7.
de1mos said:
Hello everyone,
I've been using this community for a while, but this is my first post. One or two months ago I successfully rooted my Samsung Galaxy Ace S5830 and installed Imaginary ICS Final along with CWM Recovery 5.0.2.6. Everything worked fine but today I decided to update to a 4.4 custom rom. I installed CM 11 from this post http://forum.xda-developers.com/showthread.php?t=2659269, but after selecting my language a popup apeared which said "The setup aplication has stopped working", so I looked for another ROM. I found this one http://forum.xda-developers.com/showthread.php?t=2684893, but it required TWRP Recovery to be installed. I downloaded it, copied it to my SD and tried to install it form CWM 5.0.2.6.
Now, my phone goes into a blue screen whether I try to boot normally or into the recovery menu and I don't now how to solve it. Since I can boot into download mode, I've tried using Odin, but it doesn't recognize my phone. Can anyone help me, please? Thanks a lot in advance.
PS: I'm using Windows 8.1 x64.
EDIT: Now Odin recognizes it, but it gets stuck in "<1> setup connection...".
Click to expand...
Click to collapse
You usually get the "setup connection" error when you are in the Emergency Download Mode instead of Download Mode. You go to Emergency Download Mode by holding down Volume Up + Volume Down + Home Button + Power Button in which it loads a screen that says "Emergency Download Mode" and you go to Download mode by holding down Volume Down + Home Button + Power Button in which it does load the correct download screen with the yellowish message that say "Downloading…". Please make sure you are going to the Download Mode. Then try to flash again. Do post the result. Hope I Helped
Phone should detect in odin if you've Installed proper drivers for your phone.
Try this guide,
http://forum.xda-developers.com/showthread.php?t=2609021
Sent from my Galaxy Ace GT-S5830 using xda app-developers app
mahithm said:
You usually get the "setup connection" error when you are in the Emergency Download Mode instead of Download Mode. You go to Emergency Download Mode by holding down Volume Up + Volume Down + Home Button + Power Button in which it loads a screen that says "Emergency Download Mode" and you go to Download mode by holding down Volume Down + Home Button + Power Button in which it does load the correct download screen with the yellowish message that say "Downloading…". Please make sure you are going to the Download Mode. Then try to flash again. Do post the result. Hope I Helped
Click to expand...
Click to collapse
You're right, I was entering Emergency Download Mode (the one which says ARM9 mode). However, if I enter the normal download mode and plug my phone, Odin doesn't recognize it and Windows shows a message in the traybar which says "Can't recognize USB device".
brijeshep said:
Phone should detect in odin if you've Installed proper drivers for your phone.
Try this guide,
http://forum.xda-developers.com/showthread.php?t=2609021
Sent from my Galaxy Ace GT-S5830 using xda app-developers app
Click to expand...
Click to collapse
I've followed it step by step and Odin still doesn't recognize my phone.
de1mos said:
You're right, I was entering Emergency Download Mode (the one which says ARM9 mode). However, if I enter the normal download mode and plug my phone, Odin doesn't recognize it and Windows shows a message in the traybar which says "Can't recognize USB device".
I've followed it step by step and Odin still doesn't recognize my phone.
Click to expand...
Click to collapse
Try this link on how to install stock rom using odin along with all firmwares. Go to the "Preparation" section where you will find all the necessary downloads including the drivers.
Flash stock rom on Samsung Galaxy Ace S5830 using odin
Do post the result. Hope I Helped
Thanks a lot, but I've solved it flashing through Odin with a PC running a clean installation of Windows 7.
de1mos said:
Thanks a lot, but I've solved it flashing through Odin with a PC running a clean installation of Windows 7.
Click to expand...
Click to collapse
Glad to hear that buddy
try updating ur drivers online first, go to the download mode by pressing the vol up, down and the power button simultaneously, and then odin vud recognise it..
when u have successfully installed the stock rom from Odin, go to recoverymode, then to clockworkmod, remove cahe and dalvik data and then install the rom that u want.
This shud do as it worked for me..
Hit the "Thanks" button if it helped..
ShardulS. said:
try updating ur drivers online first, go to the download mode by pressing the vol up, down and the power button simultaneously, and then odin vud recognise it..
when u have successfully installed the stock rom from Odin, go to recoverymode, then to clockworkmod, remove cahe and dalvik data and then install the rom that u want.
This shud do as it worked for me..
Hit the "Thanks" button if it helped..
Click to expand...
Click to collapse
Bro, this question is solved. See "Edit 2" in the question where the author has specified what he did to solve this problem.