Related
had stock rom 4.04 XXLRB, than i wanted to root using http://forum.xda-developers.com/showthread.php?t=1329360
here i saw this :
Using CWM.zip (temporary/Touch recovery)method to root is said to be unsafe by entropy, and till safe release don't use it
Read This http://forum.xda-developers.com/show....php?t=1810954 and i clicked on last link and via Odin installed CF Root kernel CF-Root-SGN_XX_DBT_LRQ-v5.6-CWM5.zip , i done that and later install TriangleAway v1.95.
Than wanted to install ROM LiquidSmooth » JellyBean RC 3 » 29th Sept, and i wanted to do via CWM mode, and all goes good untill i saw on display : Erasing the system.....i wasnt near phone 1 minutes and display was black/turned off. I aited some 20 minutes, and nothing. Than i decided to try to turn on, nothing, dead. I leave battery out for some time, put back battery....nothing happened. PC cant see phone via USB.
I guess this is hard bricked phone or maybe not. I googled for solution, nothing. Maybe someone have expirience how to fix this?
put the phone in download mode by pressing vol down +power +home
Sent from my GT-N7000 using xda premium
tried already few times, nothing, still dead
Try a difference battery or keep it in charging for a while. may be the battery is dead
Sent from my GT-N7000 using xda premium
---------- Post added at 03:40 AM ---------- Previous post was at 03:40 AM ----------
different* damn auto correct
Sent from my GT-N7000 using xda premium
will try, but battery was full just before starting rooting...thanks for replies man, will let you know
Press vol down, power house 20 seconds, Vol up later. Connect your phone to your computer and see if the phone detects PCOdin.
If it detects three file upload stock ROM GB.
tried all that, nothing happened. Battery is charging when i connect charger, i can feel phone is hot.
still dead
PC Odin does not see your phone? And the computer when connected to the phone seems a sound?
odin cant see my phone, no sound when connecting phone to PC via USB
You probably do not have the Samsung drivers installed on your computer.
Download Kies network and install the drivers off Kies. Start Odin and try again later steps in my first message. Do not worry about the black phone screen. It is important that Odin saw the phone
he installed cf root kernel via Odin so drivers should be there right?
Sent from my GT-N7000 using xda premium
Gregs5 said:
You probably do not have the Samsung drivers installed on your computer.
Download Kies network and install the drivers off Kies. Start Odin and try again later steps in my first message. Do not worry about the black phone screen. It is important that Odin saw the phone
Click to expand...
Click to collapse
now i am updating Kies, and i guess will install drivers. You said Press vol down, power house 20 seconds, Vol up later....whats mean Vol up later ? sorry but need to ask steps....there is a hope
nokiamodeln91 said:
he installed cf root kernel via Odin so drivers should be there right?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
yes, installed via Odin cf root kernel
Yes same thing happened to me but i landed in a soft brick. It says erasing system and self restarts the phone after which i was stuck at samsung boot logo. I was on stock rom, rooted it, install hydracore kernel, flash cm10 then i flashed liquid smooth. But during flashing some symbol art appear with a message system erasing and then it restarted.
Sent from my GT-N7000 using xda app-developers app
#Greg5 , nothing happened, same thing, black dead display
now there seems to be scare options
1 usb jig
2 jtag
3 samsung service
Sent from my GT-N7000 using xda premium
U need a usb jig. That will definitely work.
Sent from my GT-N7000 using xda app-developers app
i see its something to cut cable, micro usb and resistors !?!?! uffff......
tanzemyu said:
i see its something to cut cable, micro usb and resistors !?!?! uffff......
Click to expand...
Click to collapse
yeah
Sent from my GT-N7000 using xda premium
need to buy resistors tomorrow, and to make this technological bullet....
I installed a rom called Eaglesblood from ROM Manager.
When it was all installed, the phone just loops and won't start. The only thing that is showing is the Eaglesblood logo. I tried to boot ROM Manager, but it wont start since the LG logo is not showing.
Is there anything I can do?
One more thing, I tried to connect it to the computer and it is charing, but it does not show as any device on the computer though.
You must wipe your phone before installing a new rom, otherwise you can get bootloops, try it good luck
Sent from my Optimus 2X using xda app-developers app
Itaka06 said:
You must wipe your phone before installing a new rom, otherwise you can get bootloops, try it good luck
Click to expand...
Click to collapse
How do I wipe the phone?
pankie91 said:
How do I wipe the phone?
Click to expand...
Click to collapse
search around, there's a few very good guides on this and other forums.
You must reboot in cwm and there you can wipe the phone... in option advanced are mire wipe option, best way to install a custom rom is making a fullwipe.. whatch in xda there are many guides for this.
Sent from my Optimus 2X using xda app-developers app
Itaka06 said:
You must reboot in cwm and there you can wipe the phone... in option advanced are mire wipe option, best way to install a custom rom is making a fullwipe.. whatch in xda there are many guides for this.
Click to expand...
Click to collapse
I tried to access the CWM by holding the Power and -Vol on the phone. The phone just boot up and doesn't even go into the cwm. The Eaglesblood logo just repeats all over.
I can take pictures if you like, if it is easier to understand.
Is there anyway to access the phone by USB? I can't even find it on the PC when I plug it in, it just charges itself
Hold down the buttons longer
Sent from my LG-P990 using xda app-developers app
Neefy said:
Hold down the buttons longer
Click to expand...
Click to collapse
I gave this a try before, in like 10 minutes. It doesn't do anything, just the EaglesBlood logo is flashing in a loop.
Hold down the volume down key and the power button, this have to work..
Sry dont see that you tryed this already, try to recovery with nvflash
Sent from my Optimus 2X using xda app-developers app
pankie91 said:
I gave this a try before, in like 10 minutes. It doesn't do anything, just the EaglesBlood logo is flashing in a loop.
Click to expand...
Click to collapse
Try volume key up
Using A5
Sent by XDA Premium
If you are unable to recover your phone you can always use NVflash. It will flash one of the first Froyo versions on your phone. Then you can root it, install ClockworkMod and install any ROM you like.
http://forum.xda-developers.com/showthread.php?t=1007825
It's low level flashing so use it only when there is no other option.
Itaka06 said:
Hold down the volume down key and the power button, this have to work..
Click to expand...
Click to collapse
Done this a few times, isn't there any other way to wipe the phone?
coolprateek.kumar said:
Try volume key up
Click to expand...
Click to collapse
Tried this, with the power on. Nothing happens, just the continuous loop.
BlackDragonPL said:
If you are unable to recover your phone you can always use NVflash. It will flash one of the first Froyo versions on your phone. Then you can root it, install ClockworkMod and install any ROM you like.
http://forum.xda-developers.com/showthread.php?t=1007825
It's low level flashing so use it only when there is no other option.
Click to expand...
Click to collapse
Thanks! But I still have an error trying to connect my phone to the computer. The USB is charing the phone, but the computer won't recognize the device. It doesn't even popup anything.
I have windows 8 on my desktop, and I tried to plug it in the laptop aswell, but it doesn't do anything. And yes, I have the LG drivers installed already.
If you remove battery and you push vol down key and power button and you connect to usb then you get into recovery mode?
Sent from my Optimus 2X using xda app-developers app
Itaka06 said:
If you remove battery and you push vol down key and power button and you connect to usb then you get into recovery mode?
Click to expand...
Click to collapse
No, it doesn't. The LG logo is just flashing then it turns black and repeats itself like that.
However, i tried only to hold down the vol-down button and plugged the USB in and then it starts something saying:
"S/W Upgrade please wait while upgrading..." but it does not show up on the PC as if it was connected.
Yes, so try to reflash cwm.. look at the guids in the section android development..
Sent from my Optimus 2X using xda app-developers app
---------- Post added at 07:29 PM ---------- Previous post was at 07:22 PM ----------
Last idea i have is to reflash stock and then to start new.. try this tutorial, original rom you find in xda
http://forum.xda-developers.com/showthread.php?t=1008070
Sent from my Optimus 2X using xda app-developers app
Itaka06 said:
Last idea i have is to reflash stock and then to start new.. try this tutorial, original rom you find in xda
http://forum.xda-developers.com/showthread.php?t=1008070
Click to expand...
Click to collapse
I'm very thankful for linking me this, but the problem still exist that I can't find my device on Windows. If i remember correctly, the USB connection to the phone stoped to work when I fixed root access to the phone and the CWM.
Is there anything I can do to fix this USB connection issue?
Try this, you can get to the stock via s/w upgrade and smartflash this must work, there is a completr tutorial how to get on stock via smartflash. I hope i can help
http://android.stackexchange.com/qu...-lg-optimus-2x-p990-back-to-stock-lg-software
Sent from my Optimus 2X using xda app-developers app
Have you tried a different USB cable? My LG cable went bad on me and I could still charge with it but I have to use another cable for connecting to the computer.
His cable works, otherwise he can't get to s/w mode.. try the tutorial with smartflash i send you in the last post
Sent from my Optimus 2X using xda app-developers app
Hello I am new here ;P
Yesterday my phone won't boot anymore so I kinda had a problem. The software I had installed was:
http://www.theandroidsoul.com/android-4-0-4-ics-for-galaxy-s-i9000/
I was trying to get my phone back working and looked up some guides online. I tried to use the same guide I used before ( up here) but that won't work. So I kept looking to get my phone back working and found this:
http://forum.xda-developers.com/showthread.php?t=1300843
I picked this one:
I897UCKJ3 Android 2.3.5 Gingerbread
And just put my phone in download mode and installed it.
My phone booted again and I was able to use it but now I have some major issues..
- My home button is not working anymore.
- My back button works like a home button and closes all my apps
- The volume buttons don't work anymore
- When i plug it in my computer or the outlet to power it, it turns off. So I can't take things of it to my computer
Also my 3G isn't working anymore. I can't use it anymore now and I have no idea how to fix this :S IF anyone has a solution that would be great.
Otherwise I will try to bring it to the store..
Use this Odin or Heimdall i897ucKK4 One Click. It will do a full wipe and will get u back to Stock GB 2.3.5
http://forum.xda-developers.com/showthread.php?p=18370912
(Your capacitive buttons are messed up because u flashed i9000 firmware on ur i897 Captivate.)
Sent from my SAMSUNG-SGH-I777 using xda premium
But I can't get into download anymore since my buttons aren't working properly :S
Also I can't seem to charge my phone anymore and the battery is low atm..
U got a Jig ? If not, see my signature link below for a link on where to buy or how to make one.
U could also try to clean out the micro usb port and try a different cable.
Sent from my SAMSUNG-SGH-I777 using xda premium
Timeehz said:
But I can't get into download anymore since my buttons aren't working properly :S
Also I can't seem to charge my phone anymore and the battery is low atm..
Click to expand...
Click to collapse
Have you tried only using the down volume for recovery?
Sent from my SGH-I777 using xda premium
Yep. Good call ko. .... Since he flashed i9000 firmware and it may have included bootloaders (i didn't look at the link that close)...
Download = power button and volume down together.
Recovery = power button and volume up together.
Sent from my SAMSUNG-SGH-I777 using xda premium
If I hold the power button + volume down it shows me the At&T logo and then just starts up my phone without getting into download mode! :S
Try the above download method with ur phone powered off if u didn't already. If a no go then try below...
Open Odin or Heimdall (whichever u decide to use), Pull battery, replace it and cover, connect usb end of ur cable to the pc (not in a hub, but preferably a port in the back of the pc), hold both volume up and down together and then insert micro usb into phone. Does ur phone go into Download mode ? If so, proceed.
Sent from my SAMSUNG-SGH-I777 using xda premium
---------- Post added at 11:42 AM ---------- Previous post was at 11:35 AM ----------
Should have asked earlier but......what model # is ur phone ???
Sent from my SAMSUNG-SGH-I777 using xda premium
My model number is SGH-I897
I'm gonna try what you said now
EDIT:
Okay I did what u said and my phone got into download mode!
I downloaded this file :
I897UCKK4 Odin One Click - Stock, CONTAINS Bootloaders, Re-partition, Full Wipe
And Odin found my phone and I pressed Start
It now says SetupConnection.. for about 5 minutes
How long do I have to wait?
If still no progress...U can stop Odin and completely start over as i outlined. Try a different port and/or different cable.
Sent from my SAMSUNG-SGH-I777 using xda premium
---------- Post added at 12:06 PM ---------- Previous post was at 12:01 PM ----------
Be sure to have a constant power source and a reliable cable when flashin bootloaders. During the few seconds it takes to flash the boot.bin and sbl.bin, u don't want to loose power or usb/micro usb connection.
Sent from my SAMSUNG-SGH-I777 using xda premium
Okay I did that and I manged to install that one click i897uckk4.
It installed the new software and all my apps are gone again but still the home button is not working and the back button still closes all my apps.
And for future reference, once u have these bootloaders flashed that r included with the kk4, there should be no need to flash back to stock with bootloaders again. If u ever need to flash stock i897 firmware again, just use one without bootloaders.
Sent from my SAMSUNG-SGH-I777 using xda premium
---------- Post added at 12:13 PM ---------- Previous post was at 12:10 PM ----------
Timeehz said:
Okay I did that and I manged to install that one click i897uckk4.
It installed the new software and all my apps are gone again but still the home button is not working and the back button still closes all my apps.
Click to expand...
Click to collapse
Yes. That was a full wipe firmware.
Not sure why ur home button is not working and back button acts like home button ??? May be capacitive hardware issue ??
Sent from my SAMSUNG-SGH-I777 using xda premium
I have no idea why these buttons are doing so weird but I'm pretty sure it's not a hardware problem because only when I installed this they stopped working. Are there any other versions I can try like the one I had before or would that totally destroy my phone?
I was trying to follow this tutorial to get it back running again but since I couldn't get into download mode I never did that:
http://www.theandroidsoul.com/android-4-1-galaxy-s-i9000-install-remics-jb-rom/
Can I just follow that guide now or would that get into trouble with the stuff I just installed?
^
U don't need to flash that stuff in the guide u linked, because that is only for i9000.
There are other firmwares u can try to flash in that thread where the kk4 is located. Just use the ones without bootloaders.
Sent from my SAMSUNG-SGH-I777 using xda premium
It now says:
"Firmware upgrade fail!
Try using recovery mode"
When I try to get it into download to install another version without bootloaders o;
Is there any way to just get it back to factory settings? I just want it to work that's all
Use that as a download mode screen.
See this....http://forum.xda-developers.com/showthread.php?p=33227557
Sent from my SAMSUNG-SGH-I777 using xda premium
I installed the one without bootloader but still same problem with the buttons. And what do you mean that I can't follow the tutorial because it's for the I9000. I have a I9000 right?
U said u have an i897. That is a Captivate. I9000 is not the Captivate.
Sent from my SAMSUNG-SGH-I777 using xda premium
It says i897 on my phone but maybe that's the software I installed because I looked up the Samsung captivate on google and that's not the phone I have. I have a I9000 ( samsung galaxy S )
Maybe that's why the buttons are not working?
Any idea what to install for the i9000?
Btw 6 months ago i installed this:
http://www.theandroidsoul.com/android-4-0-4-ics-for-galaxy-s-i9000/
And that worked all the time and that's also for the i9000?
EDIT:
I manged to install Semaphore 2.7.4 for the Samsung Galaxy S and my buttons are working now!
Any idea what the best software is to install for the Galaxy S?
Thanks for all the help so far btw I didn't thought I was able to get it running again
Timeehz said:
It says i897 on my phone but maybe that's the software I installed because I looked up the Samsung captivate on google and that's not the phone I have. I have a I9000 ( samsung galaxy S )
Maybe that's why the buttons are not working?
Any idea what to install for the i9000?
Btw 6 months ago i installed this:
http://www.theandroidsoul.com/android-4-0-4-ics-for-galaxy-s-i9000/
And that worked all the time and that's also for the i9000?
EDIT:
I manged to install Semaphore 2.7.4 for the Samsung Galaxy S and my buttons are working now!
Any idea what the best software is to install for the Galaxy S?
Thanks for all the help so far btw I didn't thought I was able to get it running again
Click to expand...
Click to collapse
There's isn't a ''Best'' Software per say. It goes to user preference but I highly recommend AOKP or AoCP (Both on Jelly Bean).
hello
i have Galaxy Note running ICS ROM based on samsung rom
this is what i do
1-download JELLYBAM ROM
2-copy JELLYBAM ROM to the SD CARD
3- wipe date (factory reset)
4-after i accept installing the rom my galaxy note freeze
i pull out the battery then i pull it in again and tunt it on but he won't turn on !!
sorry for my english
So you made a factory reset on a stock ICS. This might result in a bricked device. But let's hope it didn't.
Can you start the recovery or the download mode? (pressing three buttons at the same time: Home, Vol up or down (recovery or download) and then Power button. Hold it until you see recovery or download mode)
If so you can use PC Odin for installing a new Rom
ThaiDai said:
So you made a factory reset on a stock ICS. This might result in a bricked device. But let's hope it didn't.
Can you start the recovery or the download mode? (pressing three buttons at the same time: Home, Vol up or down (recovery or download) and then Power button. Hold it until you see recovery or download mode)
If so you can use PC Odin for installing a new Rom
Click to expand...
Click to collapse
it was running custom rom based on samsung ics rom .. i can't turn it on
AW: Galaxy note dead !! Help !!
Please more precisely
You cannot turn on or you cannot switch to download mode?
Was your battery fully charged?
Sent from my GT-N7000 using xda premium
ThaiDai said:
Please more precisely
You cannot turn on or you cannot switch to download mode?
Was your battery fully charged?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
i can't turn it on .. it was like %15
-juanito- said:
i can't turn it on .. it was like %15
Click to expand...
Click to collapse
This isn't good. Never install Roms when battery is under 50%. So I guess you didn't read so much before trying to install a Custom Rom.
First try to charge your battery (outside of the device) in another Note or with a charger.
Then try it again.
ThaiDai said:
This isn't good. Never install Roms when battery is under 50%. So I guess you didn't read so much before trying to install a Custom Rom.
First try to charge your battery (outside of the device) in another Note or with a charger.
Then try it again.
Click to expand...
Click to collapse
i just tried it .. Nothing new
Sent from my Nexus 4 using Tapatalk 2
Does your note enter download mode with USB jig ?
He won't turn on ever .. I click & hold power button but nothing happen .. Even with power +volume up+home button
Sent from my Nexus 4 using Tapatalk 2
You have to recharge your battery first!
-juanito- said:
hello
i have Galaxy Note running ICS ROM based on samsung rom
this is what i do
1-download JELLYBAM ROM
2-copy JELLYBAM ROM to the SD CARD
3- wipe date (factory reset)
4-after i accept installing the rom my galaxy note freeze
i pull out the battery then i pull it in again and tunt it on but he won't turn on !!
sorry for my english
Click to expand...
Click to collapse
BRICK. :laugh:
try this: http://forum.xda-developers.com/showthread.php?t=1667886
---------- Post added at 11:12 PM ---------- Previous post was at 11:10 PM ----------
Or maybe just try to charge ur battery, flash HYdracore kernel and u will be very happy if that works.
If not read my first post to u. :highfive:
Sale_zg said:
BRICK. :laugh:
try this: http://forum.xda-developers.com/showthread.php?t=1667886
---------- Post added at 11:12 PM ---------- Previous post was at 11:10 PM ----------
Or maybe just try to charge ur battery, flash HYdracore kernel and u will be very happy if that works.
If not read my first post to u. :highfive:
Click to expand...
Click to collapse
the device won't turn on ever
Sent from my Nexus 4 using Tapatalk 2
Milz an Grosshirn:
You have to charge your battery outside the Note first!
ThaiDai said:
Milz an Grosshirn:
You have to charge your battery outside the Note first!
Click to expand...
Click to collapse
+1 :highfive:
---------- Post added at 07:04 PM ---------- Previous post was at 07:00 PM ----------
-juanito- said:
the device won't turn on ever
Sent from my Nexus 4 using Tapatalk 2
Click to expand...
Click to collapse
:laugh:
This is one of my post to one of u "never tried to read maniacs":
Quote:
Originally Posted by Tobias H.
I was already downloading the 4.0.4. ROM. Because I read somewhere it´s not possible to go from ICS to Gingerbread.
The download just finished right after you answered and I tried. I am 100% sure i got the right ROM.
Before getting all these Problems, I wanted to get a CustomROM on my phone. Android 4.0.4 was installed at that point of time.
I rooted my phone and did a backup with CWM. Then i chose wipe data, while doing that I started to charge my phone (I don´t know if that matters). I didn´t see what happen exactly because i wasn´t looking at my phone all the time, but when i looked at it again there was only the charging sign shown. Then I tried to get into recoverymode again. This wouldn´t work. I tried to flash CWM with Odin which worked after some time. Then I tried to Wipe data and cache again. wipe data wouldn´t work. Wipe cache worked. I tried to install the backup. After waiting for more then 1 hour it looked like nothing happend and the installation was stuck. But the regular recovery of Android was installed.
Because flashing a ROM through CWM wouldn´t work, I tried to flash it through Odin. First time I tried with a Gingerbread Version. I was thinking, I don´t care which version as long as it works and try again to install a CustomROM from there on. Odin stopped at NAND Write Start!!. Tried it with the ICS Stock version. Same thing.
This is where I am at now
MY POST TO HIM:::::
Why did u buy SGN? To brick it?
Do you even read and search before doing something for the first time?
LOOK, READ AND LEARN THIS for stock ROMs and kernels, specialy for ICS:
- http://forum.xda-developers.com/show....php?t=1424997
-http://forum.xda-developers.com/showthread.php?t=1371007
-http://forum.xda-developers.com/showthread.php?t=1827394
To run ur device find something and READ.
Try leaked JB custom ROM and stock rooted kernel with safe emmc_cap_erase block (emmc bug fix) -Philz Kernel
READ and LEARN.
Have fun
P.S. Maybe you will need our friend hg42 and his famous .PIT files so here it is: http://forum.xda-developers.com/show....php?t=1667886
Just like the title says, I'm stuck in a bootloop on my tmobile note 4, this is what happened, I got sweat in my phone, screen went out, let the phone sit for a day, screen is back on but it says galaxy note 4 with the blue recovery at the top, I can get into download mode and I've tried all of the firmwares for this phone,the ank4 anj7 and the anih, it says passed but still never boots always bootloop at the galaxy note 4 screen with the blue recovery word in the top corner, but never goes into recovery, any help would be highly appreciated
cj28sc said:
Just like the title says, I'm stuck in a bootloop, this is what happened, I got sweat in my phone screen went out, let the phone sit for a day, screen is back on but it says galaxy note 4 with the blue recovery at the top, I can get into download mode and I've tried all of the firmwares for this phone, it says passed but still never boots always bootloop at the galaxy note 4 screen, any help would be highly appreciated
Click to expand...
Click to collapse
How much sweat did you get in your phone? I have had my phone in pouring rain, got water in the sensor, and rubbing alcohol the whole nine and my phone functions just like it came out the box. Are you running a custom recovery?
cj28sc said:
Just like the title says, I'm stuck in a bootloop, this is what happened, I got sweat in my phone screen went out, let the phone sit for a day, screen is back on but it says galaxy note 4 with the blue recovery at the top, I can get into download mode and I've tried all of the firmwares for this phone, it says passed but still never boots always bootloop at the galaxy note 4 screen, any help would be highly appreciated
Click to expand...
Click to collapse
More information will yield more answers.
What device, what rom, what recovery, what have you done so far.....we need a little more info than this....you tried all the firmwares? Say what?
What kind of sweat. Like gym sweat or sex sweat? Get replacement
BAD ASS NOTE 4
I flashed the ank4 firmware and that is what its doing, right when I put the battery in
tmobile note 4, I tried Odin with all firmwares for that model, the Anj7, ank4, and the anih
cj28sc said:
tmobile note 4, I tried Odin with all firmwares for that model, the Anj7, ank4, and the anih
Click to expand...
Click to collapse
@BACARDILIMON is correct, get it replaced!
Definetly leave out the sweat part. U plugged it in last night and when u woke up phone was off. You powered it up and u got a weird blue screen. Done
BAD ASS NOTE 4
Lets just say when I woke up the phone was under me, and its not a blue screen, it is saying Samsung galaxy note 4 with recovery in blue at the top, phone didn't work for a day, now it is at least doing that, but yeah maybe something is ruined on the board but thanks for all of u guys comments, positive and negative, that's what this site is for, people who voice their opinion so I will wait a few days to see what the phone does then eventually get another one, thanks again guys
cj28sc said:
Lets just say when I woke up the phone was under me, and its not a blue screen, it is saying Samsung galaxy note 4 with recovery in blue at the top, phone didn't work for a day, now it is at least doing that, but yeah maybe something is ruined on the board but thanks for all of u guys comments, positive and negative, that's what this site is for, people who voice their opinion so I will wait a few days to see what the phone does then eventually get another one, thanks again guys
Click to expand...
Click to collapse
So let me get this straight, you are in bootloop (phone not broken) and you have the tiny blue letter that says going to recover but you never go into recovery? Your recovery is messed up...
So when you ODIN, assuming you are doing it properly (bad wires can give false "passed" status and you will bootlop) If you have a bad Odin, you will bootloop.
Make sure to ODIN and uncheck "reboot" and once odin is done, try to go into recovery yourself and wipe your data.
I will suggest better wiring as well. A simple good ODIN will get you back on track my friend
I will try it tonight, thanks
MAKE SURE YOU FACTORY RESET BEFORE BOOTING THE NEWLY FLASHED FIRMWARE.
Sent from my SM-N910W8 using XDA Premium 4 mobile app
---------- Post added at 04:13 PM ---------- Previous post was at 04:11 PM ----------
http://forum.xda-developers.com/showthread.php?t=2957156
Sent from my SM-N910W8 using XDA Premium 4 mobile app
hi
thats the problem i was having when the bootlooping started, i used odin and it just bootloop, it says recovery at the top but never goes in
devynbf said:
MAKE SURE YOU FACTORY RESET BEFORE BOOTING THE NEWLY FLASHED FIRMWARE.
Sent from my SM-N910W8 using XDA Premium 4 mobile app
---------- Post added at 04:13 PM ---------- Previous post was at 04:11 PM ----------
http://forum.xda-developers.com/showthread.php?t=2957156
Sent from my SM-N910W8 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Can you flash a custom recovery like TWRP via odin and boot into that?
Sent from my SM-N910T using XDA Free mobile app
tried that tonight, still bootlooping, might just have to get another one in the near future, thanks
QUOTE=nosympathy;60035210]Can you flash a custom recovery like TWRP via odin and boot into that?
Sent from my SM-N910T using XDA Free mobile app[/QUOTE]
cj28sc said:
tried that tonight, still bootlooping, might just have to get another one in the near future, thanks
QUOTE=nosympathy;60035210]Can you flash a custom recovery like TWRP via odin and boot into that?
Sent from my SM-N910T using XDA Free mobile app
Click to expand...
Click to collapse
[/QUOTE]
Your recovery didn't stick. It shouldn't be a huge deal. You need to start over. Flash TWRP via ODIN. The phone won't let you boot into any ROM if it doesn't think a recovery is installed. By trashing to flash the stock firmaware it tried to flash the stock recovery over TWRP and it didn't work. If flashing TWRP in ODIN doesn't work, you may want to try to flash the stock recovery image by it self. My guess is that once you get a working recovery installed on the phone it will boot up just fine.
Sent from my SM-T900 using XDA Free mobile app
Your recovery didn't stick. It shouldn't be a huge deal. You need to start over. Flash TWRP via ODIN. The phone won't let you boot into any ROM if it doesn't think a recovery is installed. By trashing to flash the stock firmaware it tried to flash the stock recovery over TWRP and it didn't work. If flashing TWRP in ODIN doesn't work, you may want to try to flash the stock recovery image by it self. My guess is that once you get a working recovery installed on the phone it will boot up just fine.
Sent from my SM-T900 using XDA Free mobile app[/QUOTE]
This is my thought. I had this same exact mess happen, on the note 3 though, and it was from a borked recovery. Once I got that part corrected I had no more problems. Flashing a stock image didn't work but forcing TWRP to the recovery partition did. Took me a while to decide to go that route for whatever reason.
Sent from my SM-N910T using XDA Free mobile app
Use ODIN 3.09 or above, the other ones were giving problems. I read that somewhere.