Problem in jellybam 4.1.0 installation - LG Optimus Black

Hey guys,
I am trying to install Jellybam http://forum.xda-developers.com/showthread.php?t=2019968
i started phone in recovery and did wipe/factory reset
then selected install zip
my phone shows error saying
-- Installing: /sdcard/jellybam-4.1.0_p970.STABLE.zip
Finding Update package
Opening Update package
E:Can't open /sdcard/jellybam-4.1.0_p970.STABLE.zip(bad)
Installation aborted.
Tried previous versions of jellybam ROM but same result.
But Zeus ROM installed correctly after same method.
Please help....

maybe zip file is damaged, try to download again ...

Sv: Problem in jellybam 4.1.0 installation
Yepp, bad download..
Cheers

Not working
My thought was the same...
I re-downloaded. jellybam-4.1.0_p970.STABLE
even tried other release
jellybam-4.0.0_p970.STABLE
Same result..
Is it because of older version of CWM. Do I need to upgrade?
mine is v5.8.1.3
If so, please share the link...
thanks ...

Weird, it only happens with Jellybam ROM ?

Yeah only jellybam ROMs, even when I upgraded my CWM to v6.0.1.4.
Installed CM10 ultrasound today.
Looks like my phone doesn't like jellybam..

If anyonne has other way to do this, please post...
Thank u

Solved
LOLz...
Finally it turned out to be bad download as n1980 and Romwiz guessed.
I downloaded the zip 4 times and found MD5 sum was different all the times.
Its just that direct link leaves file <=310 MB and still download completes.
I downloaded from goo.im and got it right..
Thank u guys...
Got Jellybam on my phone now..

Related

[Q] Trying To Root (Installation Aborted) Error

Im Am Trying To Root My Samsung Galaxy Ace gts5830 And Everytime i try to install the zip file provided by the forum I Keep Getting Error
E:Error In /tmp/sideload/package.zip Installation Aborted .............PLZ Help
What firmware are you running? If its ktq there's a previous step (cuz that firmwares system is full). There's a thread on that.
Other than that, which zip are you trying to flash (maybe link to post)?
How are you trying to flash it?
It Is Android Version 2.3.4......Baseband s5830dtlki4..........kernel 2.6.35.7-perf-cl568978 [email protected] #1.
Build Gingerbread.dtlki4
I Went into Recovery mode And Tried root.zip and update.zip wich i cant remember exact thread but both were of the forum
And Ive Read Lots And Cant figure it out
There's one called AceGingerRoot.zip, same stuff, go ro recovery (stock recovery, not cwm recovery) install zip from sd card. Then just update the superuser app from the market and its binary:
http://db.tt/e33J6E1P
Good luk
Thank U So Much It Worked ......
I am having the same problem, root.zip gives 'installation aborted'. I went to the link you gave for AceGingerRoot.zip and google chrome said 'malicious code and has blocked it'.
neuronetv said:
I am having the same problem, root.zip gives 'installation aborted'. I went to the link you gave for AceGingerRoot.zip and google chrome said 'malicious code and has blocked it'.
Click to expand...
Click to collapse
Which recovery mode are you using to install root- Stock or CWM?
mahithm said:
Which recovery mode are you using to install root- Stock or CWM?
Click to expand...
Click to collapse
thanks for your response but I've solved it now by doing the full /root/internal memory/ flash thing, I now have jellybean running on my SGA and lots more internal memory.
neuronetv said:
thanks for your response but I've solved it now by doing the full /root/internal memory/ flash thing, I now have jellybean running on my SGA and lots more internal memory.
Click to expand...
Click to collapse
:good:

How to install CWM ? (solved)

Hi,
I've rooted my phone. I've installed ROM Manager. The latest version is "ClockWorkMod 2.5.1.2". Root permissions are OK. When I reboot in recovery with ROM Manager he tells me that :
Code:
-- Installing package...
Finding update package...
Verifying update package...
E:failed to verify whole file signature
E:signature verification failed
Installation aborted.
This installation is about CWM am I right ? How can I install CWM without getting an error ?
Thanks.
Edit : sorry but can someone move this in the right place ? I made a mistake...
I'm in Android 2.3.4 and I want to install CyanogenMod 10. For that I need CWM Recovery.
When I click on "Flash CWM Recovery" I choose my device and there's something downloading and tells me "Successfully downloaded CWM Recovery" but when I click "Reboot to recovery" I have an error (the one in my first post).
I had that problem 2 when I started. Turned out to be a recovery bug. With some batches of our phone it seems that you can only enter android recovery v3 and not cwm after rooting. Most kernels are not compatible with v3 only 2.
Just read & follow the steps in my post in this thread
http://forum.xda-developers.com/showthread.php?t=1993937
Is that compatible with all Galaxy S ? I have a French (European maybe) device.
I have i9000 im from Holland. Its an open europe rom. U can flash it No problem.
Done flashing rom. Flash the cf root from my post
Sorry for the late. It's working, I'm now running with CyanoGenMod 10.
Thanks for your help.
Help!!
Donovan662 said:
I had that problem 2 when I started. Turned out to be a recovery bug. With some batches of our phone it seems that you can only enter android recovery v3 and not cwm after rooting. Most kernels are not compatible with v3 only 2.
Just read & follow the steps in my post in this thread
http://forum.xda-developers.com/showthread.php?t=1993937
Click to expand...
Click to collapse
Hello Donovan662, sorry for opening this one up again - i have exactly this problem too, except im on Android 2.3.6 JW4. I too have been searching for hours trying to find a remedy and have stumbled upon this - should i follow the same file download for my version or is that just for JVT as per the linked thread? thanks in advance.
geoffjac10 said:
Hello Donovan662, sorry for opening this one up again - i have exactly this problem too, except im on Android 2.3.6 JW4. I too have been searching for hours trying to find a remedy and have stumbled upon this - should i follow the same file download for my version or is that just for JVT as per the linked thread? thanks in advance.
Click to expand...
Click to collapse
Flash this
http://download.chainfire.eu/155/CF-Root/SGS/CF-Root-XX_OXA_JW4-v4.4-CWM3RFS.zip
Or follow my previous post meaning flash the JVT rom & the cf root
Donovan662 said:
Flash this
Or follow my previous post meaning flash the JVT rom & the cf root
Click to expand...
Click to collapse
OK thanks. Are you suggesting i go back to JVT from JW4, then flash that CWM root file? Only i flashed the file above and it still comes up with this error! That is btw the same file (name) i had already flashed from andriodadvices
(As you can probably tell im a noob to this and trying to follow all this and im not succeeding very well)
can you clarify please. tvm.
geoffjac10 said:
OK thanks. Are you suggesting i go back to JVT from JW4, then flash that CWM root file? Only i flashed the file above and it still comes up with this error! That is btw the same file (name) i had already flashed from andriodadvices
(As you can probably tell im a noob to this and trying to follow all this and im not succeeding very well)
can you clarify please. tvm.
Click to expand...
Click to collapse
Ok then flash JVT rom & the root file. U can follow my first post in this thread yes
Donovan662 said:
Ok then flash JVT rom & the root file. U can follow my first post in this thread yes
Click to expand...
Click to collapse
Nice one Donovan662, ive now got JVT and rooted, thanks very much!
Now i just need to choose a decent Jellybean ROM, but at least i can get in to CWM Recovery now to work from.
Although im a bit confused about terminal emulators and downloading to the sdcard bit. here goes another couple of hours research!
Just one question tho; do i need to get back to JW4 now?
geoffjac10 said:
Nice one Donovan662, ive now got JVT and rooted, thanks very much!
Now i just need to choose a decent Jellybean ROM, but at least i can get in to CWM Recovery now to work from.
Although im a bit confused about terminal emulators and downloading to the sdcard bit. here goes another couple of hours research!
Just one question tho; do i need to get back to JW4 now?
Click to expand...
Click to collapse
No u can flash a jelly bean rom of your choice now. Most time u have to flash custom more than once

Error installing CM10 rom

got a question probably a stupid one, is it possibile that i cant install CM10 rom on my Galaxy s+ coz im trying to install it from the internal sd card (internal phone memory) coz i dont have an external sd card.... when im trying to install it in recovery mod it gives me the following error:
e:Error in /emmc/cm-10-20121125-ivendor-alpha5-ariesve.zip status7 installation aborted ... i guess its becose im trying to install it from the internal sd card but it worked also like this with other roms i tried, so is there a way i can install the rom in odin without having to use the recovery mode or any other way i can solve this problem?
Napster4 said:
got a question probably a stupid one, is it possibile that i cant install CM10 rom on my Galaxy s+ coz im trying to install it from the internal sd card (internal phone memory) coz i dont have an external sd card.... when im trying to install it in recovery mod it gives me the following error:
e:Error in /emmc/cm-10-20121125-ivendor-alpha5-ariesve.zip status7 installation aborted ... i guess its becose im trying to install it from the internal sd card but it worked also like this with other roms i tried, so is there a way i can install the rom in odin without having to use the recovery mode or any other way i can solve this problem?
Click to expand...
Click to collapse
Hi,
not sure, but have you flashed twice?
moreover, check this thread - probably might give you an answer: http://forum.xda-developers.com/showthread.php?t=2046400
BTW internal card should be ok...
Napster4 said:
got a question probably a stupid one, is it possibile that i cant install CM10 rom on my Galaxy s+ coz im trying to install it from the internal sd card (internal phone memory) coz i dont have an external sd card.... when im trying to install it in recovery mod it gives me the following error:
e:Error in /emmc/cm-10-20121125-ivendor-alpha5-ariesve.zip status7 installation aborted ... i guess its becose im trying to install it from the internal sd card but it worked also like this with other roms i tried, so is there a way i can install the rom in odin without having to use the recovery mode or any other way i can solve this problem?
Click to expand...
Click to collapse
Flash the latest CWM for Galaxy S Plus and try again.
This is how to flash it:
Download Odin Multidownloader 4.43.
Download AriesVE.ops.
Download recovery-clockwork-6.0.1.9-ariesve.tar.md5.
Than follow these steps:
Turn off the phone and make sure it is disconnected from the PC.
Boot the phone into Download Mode. To do so, press and hold down the Volume Down, Home, and Power buttons until the screen turns on and an Android icon in yellow appears.
Close Samsung Kies Process from Task Manager.
Double-click Odin3 v4.43.exe to open Odin on your PC.
Connect the phone to your PC.
You should see a message that says “Added” in Odin. If not, there might be a problem with your drivers.
Click on the OPS button and select the AriesVE.ops file.
Click the PDA button and select the recovery-clockwork-6.0.1.9-ariesve.tar.md5 file.
Click the Start button to begin installation. Once installation is done, you should see a PASS message. You’re now free to unplug the phone from the PC.
I hope it helps.
@nameh: what do u mean by have u flashed twice? i flashed the stock rom before then i installed the recovery 1.2 with odin and then i installed the broodROM Business Edition v1.2 rom with the recovery mode... now i wanted to try cm10 but im getting this strange error
@educk: i already installed the recovery clockwork and i installed the broodROM Business Edition v1.2 with it and it works but when im trying to install cm10 im getting that error
Mostly you get this error message when you're flashing a Rom with different partition layout from the existing one.
Just flash again the Rom and you will succeed. Sometimes it will take 3 flashes to finish it.
Good luck.
Sent from my GT-I9000 using xda app-developers app
Napster4 said:
@nameh: what do u mean by have u flashed twice? i flashed the stock rom before then i installed the recovery 1.2 with odin and then i installed the broodROM Business Edition v1.2 rom with the recovery mode... now i wanted to try cm10 but im getting this strange error
Click to expand...
Click to collapse
I remember from the day I flashed for the first time (CM9) I received the same error message. When I searched I realized that most troubleshooting says you have to flash twice the same ROM. So you flash it once, then again into recovery mode and flash again (the same ROM).
When I did that everything was solved and working fine.
so basiclly i have to flash the stock rom twice then reinstall the recovery mode 1.2 and try it again? or can i also flash the broodROM Business Edition v1.2 rom again and try if it works?
I would try the second part -
Napster4 said:
....flash the broodROM Business Edition v1.2 rom again and try if it works?
Click to expand...
Click to collapse
nope flashed the same rom twice and tried to install cm10 rom but im still getting the same error ;(
Napster4 said:
nope flashed the same rom twice and tried to install cm10 rom but im still getting the same error ;(
Click to expand...
Click to collapse
I see... Could you try reverting back and trying from scratch? Or does CM10 works fine being alone on the phone?
dont have cm10 installed now coz i cant install it (getting that error) right now i flashed the cranium rc9 rom and it works fine... ill try to flash that twice to and then try to flash cm10... if that dosnt work ill try to flash the factory rom and then try from the start... dont know what else i could do
Napster4 said:
dont have cm10 installed now coz i cant install it (getting that error) right now i flashed the cranium rc9 rom and it works fine... ill try to flash that twice to and then try to flash cm10... if that dosnt work ill try to flash the factory rom and then try from the start... dont know what else i could do
Click to expand...
Click to collapse
One more idea - could you try to install CM9 and from there go on to CM10?
good idea ill try that to... thx for your fast answers
tried flashing factory rom reinstalling recovery mode 1.2 and then flashing cm10 but im still getting the same error *_* seems i wont be able to try the cm10 rom but its strange coz most of the other roms work and i can install them
Napster4 said:
tried flashing factory rom reinstalling recovery mode 1.2 and then flashing cm10 but im still getting the same error *_* seems i wont be able to try the cm10 rom but its strange coz most of the other roms work and i can install them
Click to expand...
Click to collapse
I would say that the problem might be related to different partition scheme CM10 uses. Have you tried the CM9->CM10?
nameh said:
I would say that the problem might be related to different partition scheme CM10 uses. Have you tried the CM9->CM10?
Click to expand...
Click to collapse
i did when trying to install cm9 im getting the same error
Napster4 said:
i did when trying to install cm9 im getting the same error
Click to expand...
Click to collapse
Could you try reverting to stock, then to CM9 and then to CM10. Just plain ROMs?
nameh said:
Could you try reverting to stock, then to CM9 and then to CM10. Just plain ROMs?
Click to expand...
Click to collapse
not really coz i cant find the cm9 and cm10 as .tar to install them with odin i can only find them as .zip to install them with recovery 1.2
Napster4 said:
not really coz i cant find the cm9 and cm10 as .tar to install them with odin i can only find them as .zip to install them with recovery 1.2
Click to expand...
Click to collapse
If you a) revert back to stock with odin, then b) get into the stock ROM, you should be able to c) copy the zip files into the phone and d) install them from the recovery, cant you?
nameh said:
If you a) revert back to stock with odin, then b) get into the stock ROM, you should be able to c) copy the zip files into the phone and d) install them from the recovery, cant you?
Click to expand...
Click to collapse
u mean installing the stockrom but then not install the revovery 1.2 but trying to install the roms with the stock recovery mode?

[Q] Status7 when flashing roms with CWM ??

Hello All
I really hope i can get some help here..
For a few days i have used Liquid smooth rom on my I9305
But i would like to try some others too..
So i downloaded the latest from Sentinel_v4_40_i9305 and the PARANOIDANDROID 3.15
both roms have i downloaded several times , just to be sure that the file is without errors
all the times is the file the right size..
So whats the problem when i try to flash them i got an error > /emmc/0/0/ and the status 7 - aborted
I have not an external sd card...
im using CWM v5.5.0.4
pls help
Update to latest recovery and it will be fixed!
Cundis said:
Update to latest recovery and it will be fixed!
Click to expand...
Click to collapse
Oh, i thought i have the latest one
thx
far from it
certainly does fix it thanks
used the rom manager app and had it done in moments
hit thanks to thank him

Failed to install cyanogen cm-11-2014*-icong.zip . Busted my Phone.. Help Urgent!

Hi, I read lots of posts here in xda on how to install custom ROM on my HTC Salsa, lot of times i felt bad as the posts always required my phone to be S-OFF. I couldn't find a nice and easy solution for this.
However somewhere i read that it is not mandatory to have S-OFF and which is when i just started experimenting on my phone.
I did unlock the bootloader from HTC dev . But i still have S-on.
I downloaded some *i9500 custom ROM and copied it to my downloads folder in sdcard. Tried to install the zip from sdcard from my CWM Recovery and it failed always. But then i thought that it could be the problem with image which i downloaded as it is not supported. So then i found one more post for HTC Salsa and downloaded the image from the link given in there.
Here is the link of that post : http://forum.xda-developers.com/showthread.php?t=2745185
Here is the link from where i downloaded the zip : http://download.androidarmv6.org/_builds/icong/
Here is the image which i downladed : cm-11-20140719-NIGHTLY-icong.zip
After getting into CWM Recovery i tried to install the same and at first it looked that it is going to install but in some time i get some error like
set_metadata_recursive.... error STATUS 7. INSTALLATION ABORTED.
Then i thought i was doing to wrong and as per some post .. i formatted all the /boot /system /sdcard ....partitions listed in CWM.
Now my sdcard is completely formatted .
After i copy my image there and try to install the same :
I get :
--Installing: /sdcard/cm-11-20140719-NIGHTLY-icong.zip
Finding update package...
Opening update package...
Installing update...
E: Error in .sdcard/cm-11-20140719-NIGHTLY-icong.zip
(Status 0)
Installation aborted.
I can't even reboot to my old ROM. .. Not sure if its lost completely. .. Need help urgently.
Please help me recover or reinstall any ROM just for my phone to come back to life again.
Please help
Please help!!!. I am not sure if my post will die here.
kingsdeb said:
Please help!!!. I am not sure if my post will die here.
Click to expand...
Click to collapse
If your using the new icong_g CM11 then you require the installation of the new cwm 6 recovery. if you follow the guides correctly then you won't have any issues.
can i ask why you thought about trying a different model phones software on this? it would only cause some serious issues lol.
and to answer the question when u wipe and clean of any data then it will leave the original OS in place unless you flash another then its that one that replaces it
BigBearEvo said:
If your using the new icong_g CM11 then you require the installation of the new cwm 6 recovery. if you follow the guides correctly then you won't have any issues.
can i ask why you thought about trying a different model phones software on this? it would only cause some serious issues lol.
and to answer the question when u wipe and clean of any data then it will leave the original OS in place unless you flash another then its that one that replaces it
Click to expand...
Click to collapse
Actually when i tried to install the icong_g CM11 i think it tried to flash but the installation aborted with error 7 as i mentioned earlier and so my old ROM was washed away i guess.
Somewhere i again read i need CWM 5.0.3 and so i tried that as well. Still getting the error.
Where can i find CWM recovery 6 for HTC Salsa.?
What are the mount/unmount options should i follow. Like /system, /data. Should they be mounted or unmounted before installing the zip.
Please help me solve the problem.
Why i am failing to install the cm-11*icong all the time with error 0. Do i really need to upgrade my CWM recovery from 5.0.3 to 6 ?
Also please help he flash my phone with manual steps.
I am using Fedora 20 for using fastboot and adb.
Got the link to download the latest recovery image ..Its 6.0.5 from the below link:
http://forum.xda-developers.com/devdb/project/?id=4865#downloads
Now i was able to install the custom ROM downloaded from here : http://download.androidarmv6.org/_builds/icong/
Atleast my phone came to life. Thanks to XDA developers.
But the graphics seem too bad. Can we do anything about it?
kingsdeb said:
Got the link to download the latest recovery image ..Its 6.0.5 from the below link:
http://forum.xda-developers.com/devdb/project/?id=4865#downloads
Now i was able to install the custom ROM downloaded from here : http://download.androidarmv6.org/_builds/icong/
Atleast my phone came to life. Thanks to XDA developers.
But the graphics seem too bad. Can we do anything about it?
Click to expand...
Click to collapse
as stated in other post, not a lot you can do about it, u can play with he screen res but it won't do much

Categories

Resources