Has anyone else bought this? I'm a bit disapointed in it. XDA has turned off search so I couldn't search for similar threads.
On Amazon they picture the buckle fitting like this. Clearly reaching out and over the entire edge and holding on tight from under.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Mine, fits like this. It's as snug as a bug in the case and no more pressure or pushing is going to make it any better. The buckle just doesn't clasp correctly
I have that case, and it only happens for me when the lower corners are not fully seated (depressed) in their holders. I know you said it is snug as a bug, and if that is the case, yours is definitely made different as mine clasps as in the first photo.
Thanks.. It's clearly defective.
I opened the case up and just put the N10 on it so there is 0% chance of anything keeping it from closing how it was intended.
It clearly is made wrong. There is no way that is clasping no matter what. Pisses me off. $15 product and they know most people won't go through the trouble of going somewhere to ship it back, paying for shipping (and then waiting for them to credit you back) and hope they get it right the second time.. It still holds, especially with the little elastic strap but I'd prefer that extra little security.. Oh well..
I have no luck with cases. My Moko case for the N7 had the magnet improperly placed and the smart cover feature never worked. (it did work though I tested it with a magnet)
Looks like that clasp isn't bent enough. The rigid material underneath is probably plastic whereas metal could perhaps be bent a little more to adjust the fit. Bummer.
I massaged down strip of foam that runs on that edge there and it's sliding over better. Not like in their photo but it's more than it originally was.. It's usable and think once the foam softens up a bit more it'll be even better.
It stays shut and is protected ... Others have complained about the same thing in reviews: http://www.amazon.com/gp/product/B00A6X3ZM6/ref=oh_details_o00_s00_i00
I see the complaints you're talking about. I'd send a picture of mine, but it's at home. I have to sort of flex the cover down while pulling up a bit on the hook to get it closed. The fit is rather tight, so I am trying to lessen the wear of repeated use. When closed the lid dips down just slightly at the hook. It would be a hassle to return. Maybe they would acknowledge a quality control problem and send a free replacement under the 3-year warranty? You're certainly not alone as Amazon attests.
I'm sorry to hear that. Mine fits perfectly. Smart Cover works pretty well to although I'm not used to it yet. My only complain is that while playing with it, the device gets hotter than usual.
I remember that in the beginning the inner tabs were very tight so I bent them to be able to remove the device more easily. I know it's difficult with that tab particularly. You can try using a heater if it's in fact plastic.
Silly question, did you move the elastic band so it's on the outside when closing the case?
Just ordered my Nexus 10 this morning and seriously considering this case...Should I do it? How reliable is their warranty if the case starts peeling or something? Should I worrya bout the tablet getting scratched while putting it on or getting it in kickstand mode so I can type on it in class?
Thanks!
In my modest opinion, the case is awesome. I own mine for about two months now. To be honest, I don't care about the warranty for a 15$ thing except if you have to return it because it's clearly defective.
I like the case, but I found another one in Amazon that I might like better. If I find it again I'll tell you.
Master Ramy said:
Just ordered my Nexus 10 this morning and seriously considering this case...Should I do it? How reliable is their warranty if the case starts peeling or something? Should I worrya bout the tablet getting scratched while putting it on or getting it in kickstand mode so I can type on it in class?
Thanks!
Click to expand...
Click to collapse
I'd say do it. I wasn't going to use a case at all, but I realized I needed one for travel. I really liked that this one didn't have a bezel. I thought I'd use it just for travel, but I've never taken it off.
I mean, I mainly use the nexus without it, especially for gaming. But exactly, I need it for carrying it in the backpack. And the stand functionality is awesome fit browsing. This is the third case I have of this type. I use another one with my note 2 and with the transformer before if this tablet.
Related
Hi all,
just wondering if anyone has come across a protective case for the XDA. The sort of thing I want is rubber not leather............
any ideas
Thanks
I saw some in an outdoor shop and will probably get myself one as soon as I can find the time to go there again.
They were meant to be used for digital cameras or portable audio players I think. They were at least rainproof, (one even claimed to be submergible!) I think they would provide the shelter required for carrying the device around in everyday use. The only problem is that you'll have to get the XDA out of the case to actually use it.
Martin
Thanks
Hi Martin, thanks for the reply.
I have found a case similar to what you have described at www.ruggedpeak.com. they seam a little expensive bur probably cheaper than a new XDA !!
XDA Hard Case
O2 sell a hard case for the XDA - It's a metal case lined with foam, that clips over the XDA and makes it pretty much shock proof - I have one, and it's GREAT!
Link: http://www.o2.co.uk/productsservices/xda/accessories5/0,,170,00.html
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Hope that helps!
Ben
its made by proporta.com bluddy ace case my old metal case but scrapes on my ols 32mb xda but this proporta case it fits nicely on the xda and holds it in wicked + u can answer the phone without having to undo it and you can even use the conectors and charge aswell
what if i have the external battery? do they make one that fit such a thicker device? i LOVE the way this case looks... alot nicer than that other aluminum case i found on ebay.
Paul Jones said:
Hi all,
just wondering if anyone has come across a protective case for the XDA. The sort of thing I want is rubber not leather............
any ideas
Thanks
Click to expand...
Click to collapse
I think this page might help, there is a phone number there for you to cal, lifetime warranty as well I think.
http://www.databuild.co.uk/../TopMenu/news.htm
Hi people Ive found a cheap and very strong case for our device.
See this link here http://www.outdoortrends.de/index.html?d_DE_39622_700_Deuter_Handytasche_Phone_Case_M6646.htm
Ive used the s model(antanna hanging out) for 1 year but its a tight fit thus heavy pulling of the zip every time to close it and it has survived a year of this treatment and still not a tear and only some paint came off the zipper.
They now have the M model which fits the Xda perfectly totally enclosing it. It offers no protection but the thing I like about this case is I can wear it horizontally on my belt with the screen facing inward and thats very comfortable.
If you see it in an outdoor store give it a try its cheap enought
Hey guys...i bought a similar case on ebay... Similar to This. The concept was great, it is lined with a nice padded feltish. materal but the closing latch did a huge number on my phone. Luckily (Ironicly) my screen $hit the bed, and T-Mo is replacing the phone for me.. My words of advice, find out what their return policy is on the merchandise and if you don't like it see if you could exchange it for something different. I didn't do that and I am stuck with my case
I would be willing to sell it for $25 (buyer pays shipping) to someone that deoesn't have paint on their XDA. I didn't like it because I like my stuff always looking new. anyone interested PM me.
is that the case which doesnt have button holes and covers the whole phone with the airel sticking out the hole at the top.
i had one of these on my 1st xda and ti made a horrible mark near my ariel and the catch scuffed up all the side and it kept popping open and all.
the PROPORTA one is a hell of a lot better that kept my 64mb XDA mint as and still looks mint today not a scrach on it just fingerprtints all over the screen and sides lol.
get the proporta one much better then that other metal case.
gaz
I totaly agree the Proporta case is a little gem they on eBay I expect thats where I picked mine up from
So I decided to make my own book cover...
I bought a hardcover book at goodwill and cut out all the pages. Bought some liner paper at a local fabric store, along with thin cardboard sheets. I cut the cardboard sheets to fit inside the book and covered the cardboard with the liner paper. Hot glued some elastic and long story short here you go:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
If anyone wants one made send me a PM. I have one extra made with extra space for a pen and note pad. And can make more upond request.
well,...case closed...
Wow, that looks awesome. I love that the nook is inside what looks like a very dated book!
Does it hold it ok? Looks like it will fall out.
flyboypr said:
Does it hold it ok? Looks like it will fall out.
Click to expand...
Click to collapse
Holds great. Its been with me all day, very sturdy. How does it look like it will fall out?
I did something similar
Your's looks pretty cool. I like the exposed book. The book I used was really old so I had to cover it.
Woah! You're both very, very good! Time to go into business! I do wonder about the durability of elastic bands holding the NC corners though. I suppose if you get good quality ones and fix them well, they should last for quite a while.
Anyone else with diy book covers to inspire us?
Awesome work fellas! =)
afroken3130 said:
Your's looks pretty cool. I like the exposed book. The book I used was really old so I had to cover it.
Click to expand...
Click to collapse
Awesome work! Your DIY was what originally made me want to make one, but couldn't find it once I started working on it. Great work.
Contra1971 said:
well,...case closed...
Click to expand...
Click to collapse
YYYEEEEEEEEEEEEEEAAAAAAAAAAH!
afroken3130 said:
Your's looks pretty cool. I like the exposed book. The book I used was really old so I had to cover it.
Click to expand...
Click to collapse
Do yo have a step by step log showing how you did that? Looks great!
That first case is very nice. I came across that layout after getting a notebook at Walgreens that was about the size of the Nook. It protected the screen, but I wanted more than that. I wanted something I could carry without worrying about smooshing and which could be an easel.
I wound up investing WAY too much time getting to where I am, but I like a lot of what I've got.
http://forum.xda-developers.com/attachment.php?attachmentid=537935&d=1299698667
The case is based on a canvas hardbound sketchbook (I just feel wrong killing a book to house an e-reader) and goes from there to build in a wood frame, a strong magnetic closure, and high-friction surfaces (velvet and corduroy) for the inside front and outside back covers to keep it from skidding off when laying down. There's a little velcro "tail" that can be used to support it like an easel in landscape mode, and a seatbelt to help it resist falling over. I'd hate to add velcro to the interior to hold it in place, but it could be done. I'm still thinking about how to do something more like a slide-in channel to really hold the device between the upper and lower posts.
http://forum.xda-developers.com/attachment.php?attachmentid=537936&d=1299698667
Total materials cost is pretty high, probably around 20 - 25 bucks. And build time is more manageable now, but it was off the hook when I started, of course.
I'm very pleased with the overall design.
The main thing I like about all the actual book book-based designs is that they don't scream "I have a fancy electronic toy."
Has anybody tried gluing some velcro strips on the back of the nook and on the cover to hold it instead of the elastic bands?
That would totally work. In my case, I decided that I wanted this case not to have that.
The old Handsprings had a manufacturer supplied cover that was very elegant - it snapped into a hardshell with "fangs" top and bottom to protect teh face. To use, remove from the fangs and face out. I had no problem putting velcro onto the cover, then putting that into a nice Body Glove zipper case.
Roger_H said:
Has anybody tried gluing some velcro strips on the back of the nook and on the cover to hold it instead of the elastic bands?
Click to expand...
Click to collapse
I was thinking of using some double sided acrylic foam tape from 3M. I have LOADS of that stuff at home. But i like the idea of being able to remove the Nook Color. The Velco would be the ideal way to go if you wanted to remove it, however to strong of a Velco and you'll end up bending the card board of the book cover....I think i might end up using the bands to hold it in place and some light duty velco to keep it from sliding around.
Anybody have an invisible shield installed on their Droid 3? I just got mine in the mail today and i tried putting it on but the corners on the back keep popping up...I really dont want to pull it up and try to reinstall because I already ran out of the solution they gave me and had to use some leftover from my Touch Pro2's install kit. Any advice is helpful Thanks
Yes I had the same problem. I think I fixed it by starting at one corner of the phone, holding it down for a few seconds and slowly moving all over the outer edge. There are a few spots that curl up but it looks good.
It sucks, I think it took me an hour to get it how I felt comfortable it would not peel off.
Just keep working at it. It feels like they rushed production and it does not fit the phone the correct way.
Sent from my DROID3
yeah for all my other phones the corners were cut so the side flap folded down and the top flap had an extra edge so u could fold it up and wrap the extra peice around the corner. it looks like this one the corners are just rounded...i tried the 'palming' method and it's working but still peels up after a while. I'm trying to be patient but it's still rather annoying.
If you ran out of the solution you can just fill it up with water, the manual says up to 3 times or so. Its just soap and water.
Sent from my DROID3 using XDA App
rda990 said:
If you ran out of the solution you can just fill it up with water, the manual says up to 3 times or so. Its just soap and water.
Sent from my DROID3 using XDA App
Click to expand...
Click to collapse
Wow, that's crazy haha. I guess I should practice reading the manuals more, after doing it so many times I just take out the plastic and start going to work. This was the first time i got a refillable bottle though, maybe it's something new they do?
On another note...
As an update, i ended up taking it to a zagg kiosk at the mall and i must say, I wish i had done that to begin with. I really didn't see how their installation could be so amazing but it was FLAWLESS...I kind of wish I had stayed and watched her do it instead of walking around the mall. Maybe I could have learned her secrets so I could make it look that good myself next time around haha.
These pics were taken within 5 minutes of leaving the mall. No bubbles at all, and all corners stayed down.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It cost $10 for the install but i think it was worth it. If it ever peels i can go get it replaced for free.
I was thinking about getting one of the invisible shields, but they seemed a bit expensive, and with a $10 applying fee (I doubt I'll be able to get it on) that's a lot for a protective film. Just wondering if other people think they're worth the price.
I think it's definitely worth the price IF you use your phone like me. I refuse to put it in a hard case and always keep in in my pocket, so it basically eliminates scratches and prevents drops because it adds a better grip/feel to the phone. Especially when taking it out of my pocket there's a chance of it slipping out of my fingers so the full body works for me. Even if you do use a case, though, the screen protector is probably a good idea. It's the best one but since it's thicker some people don't like it. I got used to it on my Touch Pro and since then i've never noticed it being hard to slide my finger on the screen. It's all up to preference basically, but there's a reason why you get multiple protectors with the cheaper versions vs. 1 with invisible shield. It just works.
Also search online for online coupons, i used Zagg20 to get a 20% discount, so all together with the install it was a little over $30. Either way you get a lifetime warranty, but if you don't get it installed by them you have to remove, ship, and reinstall the new invisible shield yourself (they reimburse for shipping) and I didn't want to struggle with the back again.
Anyone used this bumper?
The back cover is easily replaceable so I don't mind showing off the titanium texture on Note 2. A bumper fits this need. So anyone used this? It shows 20 sold, so hopefully at least someone is browsing xda.
Share your opinions :]
BTW, there's different codes of N7100 and the prices are different, e.g., BK, PK, TP, etc. What does that mean?
EDIT: UH.. nvm, seem to be color codes. BUT, same model, different prices ($20+ vs $10)????
EDIT: UH... nvm again, one is free shipping, one is $10 shipping. :facepalm:
EDIT: AND one is bid while the other is BIN. :double-facepalm:
WARNING: Based on further reading, this design is not acceptable. It scratches screen when installing/uninstalling, and possibly affects reception!!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
==========================================================================================================================================
I've also come across these
You can see that my main idea is to cover the sides, because I believe that it is still chrome like on the Note2 (mine hasn't arrived yet), and shows scratch more easily.
===========================================================================================================================================
Or do you guys think Galaxy Note™ II Protective Cover + from Samsung just looks better?
Only thing I'd be worried about is it interfering with the reception
-TeaM VeNuM Like A Boss
Ye, that's also my major concern. So I wanted to see if anyone tried it on xda. It comes from Hong Kong, so I really don't wanna waste time just to find it interferes with the reception :/
From this thread, looks like (hopefully) it won't interfere.
xCeejayy said:
It wouldn't suppress the signal since The Note isn't like the iPhone 4/4S where the antenna is on the sides. Our Antenna is on the bottom portion of our phone so this case does not interfere with signal.
Click to expand...
Click to collapse
Im very interested if anyone has tried one of these? Im waiting on my note 2 to come today and already ordered a tpu case just to get thru the first few days as thats normally when i drop a new from slipping out of my hand. adjusting to the size difference.
ksnexusone said:
Im very interested if anyone has tried one of these? Im waiting on my note 2 to come today and already ordered a tpu case just to get thru the first few days as thats normally when i drop a new from slipping out of my hand. adjusting to the size difference.
Click to expand...
Click to collapse
a buddy of mine has one on his s3 and has no problems. I am going to pass this link to him because when he asked if they were available for the note 2 they said no.. but that was a few weeks ago.
Just fyi guys, i updated in my OP that these bumpers will possibly scratch the screen when sliding in/out as well as interfering with signal strengths as i read in the other thread.
Try to avoid it or try to bear the risk.
There are plastic/soft bumper emerging on eBay. Search for them.
cswithxda said:
Just fyi guys, i updated in my OP that these bumpers will possibly scratch the screen when sliding in/out as well as interfering with signal strengths as i read in the other thread.
Try to avoid it or try to bear the risk.
There are plastic/soft bumper emerging on eBay. Search for them.
Click to expand...
Click to collapse
Dang it...I bought one yesterday...different one to the op but same sliding mechanism
Sent from my GT-N7100 using xda premium
I've had a black aluminium bumper on the titanium gray note 2 for a week, it looks badass especially with the notification led in red ahah. But it does add some bulk and removes the softness of the original design when you hold it ot shove it in your pocket, Guess that bugged me just because I used the note protection free for 2 weeks :/
No signal problem whatsoever.
Little video there, mine is the second one to prove another guy the case didn't intefere: http://www.galaxynote.fr/bumper-aluminium-t8200.html#p90815
I've ordered a second one from a different brand (with replacement buttons like in the original poster picture here instead of grip notches on the sides) in titanium gray color too I'll post a full good quality video of the case if I have some time.
Alternative Bumper
I like this one because looks like thinner on front, shows side buttons and it's nice to hold to don't falls.
Where in Chinese sites can I found?
www . youtube . com / watch?v=Gguqnpckf0c&feature=youtube_gdata_player[/url]
chorus rtyprces
wooww..
I had the same one as in OP (aluminum frame) from eBay awhile ago, and it didn't fit the phone
Looks like a Triobump Clone.
The aluminum won't scratch the screen.
Well i have never been a fan of cases or so, i always normally used my phones naked, because i think im paying the design more than the inner stuff (nobody thinks of it hehehe), but this phone seems to be a bit more delicate than any other so i`ve been searching for cases or bumpers for this beauty and obviously keeping the design and elegance.
i own 3 cases and this, by far, the most that i liked. I´ll give you my opinion and a mini-review, also the link for anyone who is interested on buying it
First, as title says, its an aluminium bumper, but what a quality, its extremely well done and very esthetic.
This is how it comes in, from here you can tell the great quality product
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
It comes in two parts, and see the cutouts for the speaker grill, usb porting charge, and 3.5mm jack
and now, mounted on the phone, look the details
I picked up this color for a reason, as you can see my phone is the gold one so the bumper red, so i made a waaaaaay cheaper IRON MAN version
PROS:
-well done design made by high quality materials
-inner side has a protective layer to prevent of scratching the phone
-keeps the width phone and the thin edge line
-even i have no tested it yet, i think it will provide a bit of protection to the sides of the phone
CONS:
-to be very aesthetic, does not provide greater protection to the screen or the back, it comes flush
-maybe the headphone jack cut out won't fit all of you, it depends on each one (at least its not a problem to me)
In general, this is and excellent accessory for those how likes to brag the design and at the same time adding a bit of protection, buttons fells very straight, great assembly, nice painting, very sharp lines mimicking design`s phone this "effect" could be achieved even more picking up the same color as your phone, but the red one makes mine the Iron man hehe, but this is not for those how wants to extremely protect your phone
here the link, the price is nice, 10 bucks, free shipping and arrived in about 3 weeks
http://www.ebay.com/itm/181742117790...:MEBIDX:IT
Cheers pals
Is the phone comfortable to hold for long periods of time? Looks quite nice, my favourite colour is red
jadaress1 said:
Is the phone comfortable to hold for long periods of time? Looks quite nice, my favourite colour is red
Click to expand...
Click to collapse
It is for me, although the sides seems sharp, they are not so, grip is a bit better due to a wider sides, maybe if you hold the phone by placing your pinky finger at the bottom you could feel discomfort only if it's on the headphone jack cutout
Enviado desde mi S6 Edge Gold
Thanks for that, id have to get a protector for the back, obviously for protection and also to make the back a bit less slippy. Thanks.
I can confirm its a great case !
http://www.android-hilfe.de/thema/g...ema-taschen-cases.666786/page-15#post-9017896
No issues with transmitting
eltoffer said:
...
http://www.ebay.com/itm/181742117790...:MEBIDX:IT
Cheers pals
Click to expand...
Click to collapse
thats weird. it seems like the listing in your link you provided was removed.
Just type the item number and it will come up
http://www.ebay.com/itm/18174211779...l?_from=R40&_sacat=0&_nkw=181742117790&_rdc=1
very nice bumper, but all of these aluminum bumpers seem to degrade signal. Wish they made one in ABS plastic.
Here is mine.
yyy999deba said:
Here is mine.
View attachment 3406646
View attachment 3406647
View attachment 3406648
View attachment 3406649
Click to expand...
Click to collapse
ive had this case but immediately threw it out because i had to bend the left side to get it in and when its all put together its all warped because you have to bend it. and it scratched my phone as well. do not recommend this case at all.
What a pity. Someone recommended this case to me. When I applied this case on my phone. I followed the installation steps listed on their website.So I do not meet your issue.
FLUFFYMANGOES said:
ive had this case but immediately threw it out because i had to bend the left side to get it in and when its all put together its all warped because you have to bend it. and it scratched my phone as well. do not recommend this case at all.
Click to expand...
Click to collapse
I had similar experience. Even worse than the scratches, GPS signal is degraded, still functional...but takes longer to get a lock.