I flashed the last update of Rebased MIUI, do a wipe data, cache and dalvik but it boot back the previoius rom force closing all the system apps, for sure its an error.
Do I have to flash a previous version before the update. Flashed with 4ext.
did u select format all partitions except sdcard ?
try that ...
demonicjas said:
did u select format all partitions except sdcard ?
try that ...
Click to expand...
Click to collapse
Well to be honest I didnt that part I will try
That was the missing step, phone rebooted and up
Sent from my Incredible S using Tapatalk 2
Me first flash it on pc fastboot flash boot boot.img the erase data / cache etc then install. Its works fine to me
Sent from my HTC Incredible S using xda premium
Instal ViperIncs just perfect rom!
Orange|Rus said:
Instal ViperIncs just perfect rom!
Click to expand...
Click to collapse
Please do not post irrelevant info. The guy asked for help flashing MIUI, not what you believed was the perfect ROM. -_-
072665995 said:
Please do not post irrelevant info. The guy asked for help flashing MIUI, not what you believed was the perfect ROM. -_-
Click to expand...
Click to collapse
Orange|Rus said:
Instal ViperIncs just perfect rom!
Click to expand...
Click to collapse
For that comment is a post on general "What is the best Rom"
Sent from my Incredible S using Tapatalk 2
Prufta said:
I flashed the last update of Rebased MIUI, do a wipe data, cache and dalvik but it boot back the previoius rom force closing all the system apps, for sure its an error.
Do I have to flash a previous version before the update. Flashed with 4ext.
Click to expand...
Click to collapse
can u flash the rom 3.1.18 with clean flah? i cant do that, stuck in htc logo... have to flash it via 3.1.11..
sorry OOT..
kidykido said:
can u flash the rom 3.1.18 with clean flah? i cant do that, stuck in htc logo... have to flash it via 3.1.11..
sorry OOT..
Click to expand...
Click to collapse
First of all install the latest version of 4ext touch, if you are coming from previous version just do a wipe cache & dalvik and format all partitions except sd card and it boot up.
I have the problem flashing .25, flashed it with 4ext normal recovery, upgraded it and my problem resolved.
Prufta said:
I flashed the last update of Rebased MIUI, do a wipe data, cache and dalvik but it boot back the previoius rom force closing all the system apps, for sure its an error.
Do I have to flash a previous version before the update. Flashed with 4ext.
Click to expand...
Click to collapse
Prufta said:
First of all install the latest version of 4ext touch, if you are coming from previous version just do a wipe cache & dalvik and format all partitions except sd card and it boot up.
I have the problem flashing .25, flashed it with 4ext normal recovery, upgraded it and my problem resolved.
Click to expand...
Click to collapse
now im on 3.2.1. but i cant flashing it cleanly, stuck at htc logo.. have to make a dirty flash to make it work... try that with the original rom from miui, still got no luck.. im using 4ext recov touch.. many complaints that they have the same prob..
Try flash unofficial cm 10 by dla then flash the miuu.
Sent from my Incredible S using xda premium
Related
my hero is stuck bootlooping on every rom i try to flash. What can i do to resolve this
Did you do a wipe before flashing roms? Also wipe/clear devlik cache in recovery along with wiping system, data, and cache. Then flash rom again. This should help.
cordell12 said:
Did you do a wipe before flashing roms? Also wipe/clear devlik cache in recovery along with wiping system, data, and cache. Then flash rom again. This should help.
Click to expand...
Click to collapse
i did all that but it said flash via adb for the devlik cache
If you are trying to flash an overclocked ROM your phone may not be able to handle it. Try to flash a stable rom such as CM6 and see what happens.
And please post your questions in the thread of the rom you are flashing or on the Q&A board.
I had the same problem and i was that i need to install a Kernel.
First we need to know what rom do you want to install.
http://www.xda-developers.com/announcements/a-reminder-from-the-xda-moderator-team/
PLEASE READ THIS FULLY!
Cyanogyn mod.....cm6
Sent from my PC36100 using XDA App
What kernel should I flash
Sent from my PC36100 using XDA App
aquarinard said:
What kernel should I flash
Click to expand...
Click to collapse
Check if UncappedKernel-Brainfuct-691 works
Each and every cm rom bootloops on my ace...
I have tried a no. of cm roms but no change...they all bootloop...stock roms work flawlessly....
Roms tried...
-cm 9 maclaws rom
-cm 9 s3 evolution
-cm 7 apocalypse
-cm 7 miracle v4
-cm 10 maclaws rom
(all install successfully but they they restart again and again...tried wiping evrything before and after flashing a rom )
I am currently on s'perience rom and has used stocklite v7.1 before it and they both work flawlessly....
Any useful advice is REALLY APPRECIATED!
Thanks in advance!!
Wow, this is weird..
Sorry, i can't help u a lot, but i can provide my step to flash those ROM:
1. Make sure your device is rooted and CWM 5 is installed
2. Place ROM in your SD card
3. Boot to CWM, wipe data, wipe dalvik cache
4. Select install from SD card
6. Then wipe data and wipe dalvik cache once again
7. Reboot your phone
Hope this is useful.
Ated said:
Wow, this is weird..
Sorry, i can't help u a lot, but i can provide my step to flash those ROM:
1. Make sure your device is rooted and CWM 5 is installed
2. Place ROM in your SD card
3. Boot to CWM, wipe data, wipe dalvik cache
4. Select install from SD card
6. Then wipe data and wipe dalvik cache once again
7. Reboot your phone
Hope this is useful.
Click to expand...
Click to collapse
I do all the steps but no use! :thumbup:
Manvendra05 said:
I do all the steps but no use! :thumbup:
Click to expand...
Click to collapse
Before you flash the rom.. recovery>mount and storage>format system then flash..(do also the other wipes)
Also format /system, /data and /cache from mounts and storage before flashing the rom.
Sent from my GT-S5830
Toni5830 said:
Before you flash the rom.. recovery>mount and storage>format system then flash..(do also the other wipes)
Click to expand...
Click to collapse
I tried doing all the three wipes (data/cache/dalvik) and all the other /format options from mounts and storage before and after flashing but it was of no use! Any other advice pls! :beer:
ayush29k said:
Also format /system, /data and /cache from mounts and storage before flashing the rom.
Sent from my GT-S5830
Click to expand...
Click to collapse
Did all of them...didnt help! :beer::beer:
Are you sure you have CWM 5 and not CWM 4?
Sent from my GT-S5830 using Tapatalk 2
galaxyace152 said:
Are you sure you have CWM 5 and not CWM 4?
Sent from my GT-S5830 using Tapatalk 2
Click to expand...
Click to collapse
Yes...it is cwm based recovery 5.0.2.6! :beer:
Owh, sadly, i don't what happen with ur device.
Are this problem related to Galaxy Ace type?
are u sure you are on S5830? its likely that u are since non-cm roms for s5830 worked on ur phone.
Try this make the 3 wipes before and after flashing the rom, sometimes i face bootloop because of not wiping after installing the rom. If this fails then how abt chnging ur SD card, although thats far fetched it might just fix the problem.
1-Stock based roms work?
2-Did you try doing "mount system" before flashing?
3-Does it say installation successful/finished/etc or are there problems??
Manvendra05 said:
I tried doing all the three wipes (data/cache/dalvik) and all the other /format options from mounts and storage before and after flashing but it was of no use! Any other advice pls! :beer:
Click to expand...
Click to collapse
Are you saying that you format system, cache and data after flashing??
You just have to wipe dalvik, cache and factory reset after flashing, and even that is also not a compulsary step.
Sent from my GT-S5830
same here. i have never ever wiped anything AFTER flashing.
another idea:
full wipe => flash rom => start => get again to cwm => flash same rom again (no wipe or anything)
dont know if this has eny effect, but i heard sometimes flashing twice fixes some problems. might work for you to
ayush29k said:
Are you saying that you format system, cache and data after flashing??
You just have to wipe dalvik, cache and factory reset after flashing, and even that is also not a compulsary step.
Sent from my GT-S5830
Click to expand...
Click to collapse
No only data cache and dalvik after flashing...!!
CJCord said:
same here. i have never ever wiped anything AFTER flashing.
another idea:
full wipe => flash rom => start => get again to cwm => flash same rom again (no wipe or anything)
dont know if this has eny effect, but i heard sometimes flashing twice fixes some problems. might work for you to
Click to expand...
Click to collapse
Ohkaay...i flashed apocalypse rom twice as u said but its bootlooping again! (
1-Stock based roms work? <br />
2-Did you try doing "mount system" before flashing?<br />
3-Does it say installation successful/finished/etc or are there problems??
Click to expand...
Click to collapse
Yes i have tried mounting system/ and data/ before flashing but its of no use...and yes it always shows complete and successful installation!
Ated said:
Owh, sadly, i don't what happen with ur device.
Are this problem related to Galaxy Ace type?
Click to expand...
Click to collapse
No its only related to my phone
zeeshanhassan said:
are u sure you are on S5830? its likely that u are since non-cm roms for s5830 worked on ur phone.
Try this make the 3 wipes before and after flashing the rom, sometimes i face bootloop because of not wiping after installing the rom. If this fails then how abt chnging ur SD card, although thats far fetched it might just fix the problem.
Click to expand...
Click to collapse
Yes it is GT-S5830 only...and i have tried all wipes and changing sd card also!
You'v got a very stubborn phone mate
Have you tried a fresh flash, flash a stock firmware through Odin and then flash the CM rom over it.
ayush29k said:
You'v got a very stubborn phone mate
Have you tried a fresh flash, flash a stock firmware through Odin and then flash the CM rom over it.
Click to expand...
Click to collapse
Ohkaay...i will try this too...will tell u the progress...after maybe a week(busy!!) :thumbup:
Ohkaay here's the new status...
Flashed stock rom from odin and trird a new fresh start but no use!
ALL CM ROMS STILL BOOTLOOP! :'(
Can sending a logcat be helpful...
Can logcat while installing rom be created ? :beer:
PLS HELP!!!
This is THE LAST JUG OF BEER !!
Define your restart.....at the boot splash ? Or the bootanimation ?
Sent from a Samsung Galaxy Ace
HI, my gnote is stuck in samsung logo while restarting,
if i should Reflash stock ROM with ODIN which ROM i should select, pls help me out
gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI, KERNEL- SPEEDMOD
Hi there,
Are you still able to go CWM? if you are still able to, make a Nandroid backup, wipe dalvik cache and cache partition and reboot recovery and system and check if your phone's able to bypass the Samsung log after. Give it a time as well to wait.. perhaps 10 mins or so.
By the way I'm just curious, what did you do to make your phone stuck to it's samsung logo in the first place?
still same prob
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Can you post call recorder thread link you tried to flash?
Sent with L0VE
baz77 said:
Can you post call recorder thread link you tried to flash?
Sent with L0VE
Click to expand...
Click to collapse
i dont have the link but i can give u the file attached
sunilkm77 said:
Thanks for the quick reply yes im still able to go to cwm 1. wiped dalvik 2. wiped cache partition 3. rebooted recovery and system
still phone's unable to bypass the Samsung logo
i just flashed call recorder zip from cwm after that im facing this problem pls help me
Click to expand...
Click to collapse
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
ok, I am not pro enought to figure out what's happening in zip.
Id recommend factory reset on safe kernel, or reflashing rom, then reflash safe kernel.
Considering I have no clue on zip, a clean install might be called for. On safe kernel and safe kernel recovery a format system/data might be needed to fully clean this stuff out. But I am not sure about that.
Why do you need call recording anyway?
edit: all at own risk ofc
Sent with L0VE
Moon2 said:
Try installing the main rom you had without doing "wipe data/factory reset", but with dalvik cache and cache wipe.
Click to expand...
Click to collapse
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
sunilkm77 said:
can u pls provide me the link for Main rom
hone info- gt- n7000, ROOTED, ics 4.0.4, base- N7000DDLRI,
Click to expand...
Click to collapse
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
letters_to_cleo said:
you can go to this thread: http://forum.xda-developers.com/showthread.php?t=1424997, courtesy of our good 'ol doc ketan.
Click to expand...
Click to collapse
Thanks for the link but im confused which ROM to install coz there are so many,
sunilkm77 said:
Thanks for the link but im confused which ROM to install coz there are so many,
Click to expand...
Click to collapse
hmm....which region or country are you in by the way?
letters_to_cleo said:
hmm....which region or country are you in by the way?
Click to expand...
Click to collapse
India
Flash kl3 india from post #2 of above said thread(first line on my signature is same)
After flashing successfully you may face force closes, dont worry and just reboot in recovery and wipe cache and data. It shiuld b solved.
Sent from my GT-N7000 using xda premium
i tried http://forum.xda-developers.com/showpost.php?p=29846310&postcount=2
now my phone is fine time to install all software's :") thanks a lot
I have to use pc odin to fix the problem
I think i wipe too many time while flashing.
Like 2 times wipe cache and 2 times wipe battery stats etc
Sent from my GT-N7000 using xda premium
i was using android revolution HD since 7.1,and 4 days ago i flashed android revolution 10.0 and the the camera app on my phone does not work anymore,i can still open the camera app but it doesnt response and close itself after a few seconds, then i tried the trickdroid 6.0.1,still the same. seems like i am the only on who have this problem, i think maybe i flash it wrong, could you guys help me find out which step i did wrong? and how to fix the camera app. thanks!
Did you flash kernels after you installed the ROMs? Looks like a kernel issue to me.
ArmedandDangerous said:
Did you flash kernels after you installed the ROMs? Looks like a kernel issue to me.
Click to expand...
Click to collapse
No, i didnt, because mike said not to.
KenHu1993 said:
No, i didnt, because mike said not to.
Click to expand...
Click to collapse
try clearing the camera app data
skinsfanbdh said:
try clearing the camera app data
Click to expand...
Click to collapse
tried, still doesn't work,and i also tried factory reset.
KenHu1993 said:
tried, still doesn't work,and i also tried 他和factory reset.
Click to expand...
Click to collapse
might want to try clearing data for gallery also. other than that maybe a bad download bad flash
skinsfanbdh said:
might want to try clearing data for gallery also. other than that maybe a bad download bad flash
Click to expand...
Click to collapse
tried, doesn't work, and i downloaded trickdroid 7.0 and flashed it, even the AOSP camera and QR scanner are not working, do you think it is a hardware problem?
KenHu1993 said:
tried, doesn't work, and i downloaded trickdroid 7.0 and flashed it, even the AOSP camera and QR scanner are not working, do you think it is a hardware problem?
Click to expand...
Click to collapse
i doubt it
did you wipe data,cache,davlik before you flashed
one more thing download rom manager and use the fix permissions script included in the app
I had this problem, But i wiped everything and flashed Android Revo 10 again and it worked again.
skinsfanbdh said:
i doubt it
did you wipe data,cache,davlik before you flashed
one more thing download rom manager and use the fix permissions script included in the app
Click to expand...
Click to collapse
i didn't wipe data,cache,davlik, becasue dont know how, the last time i flash a lot of rom on my phone is 2 years ago, and when i came from stock to android revolution HD i didnt wipe data,cache,davlik before i flash, could you please teach me how and i try flash again. in fact, every app need real facing camera doesn't work now.
in cwm wipe data/factory reset then wipe cache then go to advanced wipe davlik then flash rom then reboot
Peterboi said:
I had this problem, But i wiped everything and flashed Android Revo 10 again and it worked again.
Click to expand...
Click to collapse
in fact i dont know how to wipe everything, all i did is factory before i flash, could 有please teach me how?
skinsfanbdh said:
in cwm wipe data/factory reset then wipe cache then go to advanced wipe davlik then flash rom then reboot
Click to expand...
Click to collapse
it wont wipe my rom rar file? in old days it does..
KenHu1993 said:
it wont wipe my rom rar file? in old days it does..
Click to expand...
Click to collapse
no. it will only wipe user data,app data,and apps you have installed.
but if this is your first time using 4.2 you should backup your sd card to your computer and after you flash the rom and boot up boot back to recovery and wipe your sd card then reboot and restore backup from computer or you will think it wiped everything but it just moves things around for multiuser support
skinsfanbdh said:
no. it will only wipe user data,app data,and apps you have installed.
but if this is your first time using 4.2 you should backup your sd card to your computer and after you flash the rom and boot up boot back to recovery and wipe your sd card then reboot and restore backup from computer or you will think it wiped everything but it just moves things around for multiuser support
Click to expand...
Click to collapse
I just did the wipe data,cache,davlik and flashed again, and tried the rom manger,the camera still doesn't,work. how do i back up SDcard,or should i just delate all the stuff on my phone and only leave the rom rar on my phone and flash it?
what recovery are you using? and is the flash finishing to 100%?
skinsfanbdh said:
what recovery are you using? and is the flash finishing to 100%?
Click to expand...
Click to collapse
i am using CMW and yes, 100%
did you choose aosp camera in aroma? if so try doing it without choosing it
skinsfanbdh said:
did you choose aosp camera in aroma? if so try doing it without choosing it
Click to expand...
Click to collapse
the rom i choosed is android revolution hd,doesn't have that option..
try the stock 4.2 rom mike1986 posted. i was running ARHD 10.1 and camera worked im on trickdroid7.1 now and camera works also
i followed the instructions, flashes the kernel, install from zipcard.. and so on (im not a noob) but it wont load.. im stuck at Google animation.
I tried reinstalling, deleting cache, dalvic and so on.. but i cant get it to boot!!
anyone having the same issue??
pls respond.:crying:
do you have format /system /data and /cache?
Flash the kernel again.
Format /system,data,cache
Do factory reset/wipe data
Wipe cache partition, and dalvik cache.
After this flash the rom. :thumbup:
cdeox8 said:
Format /system,data,cache
Flash the kernel again.
Do factory reset/wipe data
Wipe cache partition, and dalvik cache.
After this flash the rom. :thumbup:
Click to expand...
Click to collapse
That should be enough.
Oh and make sure the ROM installs properly i.e. it's not a bad download.
JB
Having the same issue but it's bootlooping at nAa kernel logo, please help, i followed the instructions correctly, tried the solutions you posted, but still no luck...
It shouldn't bootloop at the kernel logo. If the ROM isn't installed properly, it should boot into CWM. Try reflashing kernel and ROM.
Alchemist32 said:
Having the same issue but it's bootlooping at nAa kernel logo, please help, i followed the instructions correctly, tried the solutions you posted, but still no luck...
Click to expand...
Click to collapse
are you using the correct kernel? it shouldn't bootloop. like sgt.meow said it should go to cwm if anything's wrong.
Seems like my phone doesn't accept any custom ROM, i tried flashing GingerCMX with Alps (wiped everything before doing that), tried reflashing kernel, roms, several times and its just not working, my xperia x8 is xxx29 (the sticker under the battery), rooted, unlocked BL and no luck... :'(
Alchemist32 said:
Seems like my phone doesn't accept any custom ROM, i tried flashing GingerCMX with Alps (wiped everything before doing that), tried reflashing kernel, roms, several times and its just not working, my xperia x8 is xxx29 (the sticker under the battery), rooted, unlocked BL and no luck... :'(
Click to expand...
Click to collapse
Did u flash the LibSensor patch?
Sent from my GT-I9100 using xda premium
Titan9119 said:
Did u flash the LibSensor patch?
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
that's not really required.
cascabel said:
that's not really required.
Click to expand...
Click to collapse
For Alfs, yes.
Sent from my GT-I9100 using xda premium
Titan9119 said:
For Alfs, yes.
Sent from my GT-I9100 using xda premium
Click to expand...
Click to collapse
i've used alfs for a couple of roms without that patch. no bootloops or any major bug.
@Titan9119
That libsensor patch is something required at ROM level i.e. after the device has booted up. And even without it, the device would be functional like @cascabel said.
I have the same problem.
I have kernel 2.0.32.61-nAa-06. I cleared the caches as required, flashed the kernel through flashtool and then flashed [ROM] | LiteCM10 | v1.0 | 09/07/2013 | JB 4.1.2 | nAa-06-kernel.
After flashing, I did a system reboot. The phone starts with the nAa kernel logo and then blacks out only to restart on the same. I've left it for a while and it keeps up the exercise. I can initiate the recovery with the back button. But nothing I've done has made a difference. Including repeated flashing.
There were no errors during the installations.
If anyone can help, I'd be most grateful.
aahd81 said:
I have the same problem.
I have kernel 2.0.32.61-nAa-06. I cleared the caches as required, flashed the kernel through flashtool and then flashed [ROM] | LiteCM10 | v1.0 | 09/07/2013 | JB 4.1.2 | nAa-06-kernel.
After flashing, I did a system reboot. The phone starts with the nAa kernel logo and then blacks out only to restart on the same. I've left it for a while and it keeps up the exercise. I can initiate the recovery with the back button. But nothing I've done has made a difference. Including repeated flashing.
There were no errors during the installations.
If anyone can help, I'd be most grateful.
Click to expand...
Click to collapse
full wipe, format data cache and system. flash rom.
cascabel said:
full wipe, format data cache and system. flash rom.
Click to expand...
Click to collapse
Already did that multiple times through the recovery mode. Wipes were completed without errors. The only thing I've not wiped is the SD Card.
aahd81 said:
Already did that multiple times through the recovery mode. Wipes were completed without errors. The only thing I've not wiped is the SD Card.
Click to expand...
Click to collapse
did you format the partitions i mentioned as well? if you did, try reflashing the kernel and rom after redownloading. might be a bad flash even if it looks like nothing went wrong.
No luck
You should go to minicm10 FAQ and look under 19 part.
Sent from my E15i running minicm7
cascabel said:
did you format the partitions i mentioned as well? if you did, try reflashing the kernel and rom after redownloading. might be a bad flash even if it looks like nothing went wrong.
Click to expand...
Click to collapse
I did the formats as well as the wipes. Downloaded the ROM and the kernel again and re-flashed. Now its getting stuck on the kernel after a vibration. Sometimes the mauve coloured light comes on and stays, at other reboots it turns off.. Can't get it into the recovery anymore
---------- Post added at 07:48 AM ---------- Previous post was at 07:31 AM ----------
Lukenda said:
You should go to minicm10 FAQ and look under 19 part.
Sent from my E15i running minicm7
Click to expand...
Click to collapse
Originally Posted by matmutant View Post
change in rom zip to *.61 for kernel version if you want the installation to complete (in META-INF/com/google/android/updater-script)
Click to expand...
Click to collapse
I did read this, and a lot of other posts, before posting. Unfortunately, I don't understand what he is asking me to do there. Which file/filename is being edited?