Database Develop

[Q] What to do, keeps rebooting?

my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me

When phone switched off:
Home Button + Power - open recovery
Wipe Data and Cache, reboot

You could try Recovery mode and wipe.
keki92 said:
my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me
Click to expand...
Click to collapse
Your might want to try PWR + HOME to get into Recovery Mode screen, then Wipe Data (Factory Reset), when done remove battery, wait 10 sec., then insert battery and boot normally... has worked for me on the orphaned S5830D SGAce w/ DTLKI4 f/w. BUT, be aware, all user settings and installed apps are vaporized !!! Stuff on /SDCARD is safe.
Cheers,

help please
donACEsko said:
When phone switched off:
Home Button + Power - open recovery
Wipe Data and Cache, reboot
Click to expand...
Click to collapse
but my buttons vol down and vol up doesn't work

lgo51 said:
Your might want to try PWR + HOME to get into Recovery Mode screen, then Wipe Data (Factory Reset), when done remove battery, wait 10 sec., then insert battery and boot normally... has worked for me on the orphaned S5830D SGAce w/ DTLKI4 f/w. BUT, be aware, all user settings and installed apps are vaporized !!! Stuff on /SDCARD is safe.
Cheers,
Click to expand...
Click to collapse
yes i know that wiping all data works again but my keys Vol + or Vol - doesn't work it's any way to do it via SDK or ADB

RTFM !
keki92 said:
yes i know that wiping all data works again but my keys Vol + or Vol - doesn't work it's any way to do it via SDK or ADB
Click to expand...
Click to collapse
The keys needed are: POWER and HOME
The keys not used are: VOLUME +/-

keki92 said:
my problem is that i used to have Cm9 (beta 8) but i wanted to return to my operator stock ROM so i flash it with Odin, One package, but now it keeps rebootng i can see samsung logo and then Telcel (splash screen o boot animation) it keeps doing it again and again i cant go to Download Mode via Home-vol down-power because my volumen key doesn't work (i brake it), i just need to know what to do? can i go to download mode via ADB or what help me
Click to expand...
Click to collapse
One package? Aren't you supposed to use the one with the 5 different files and not just one? To make a completely clean stock rom install, I mean. If that's what you want.

I think he(or she) want a stock rom only. You need to do a full wipe after flash with odin. Maybe touch recovery helps you, but i cant find any . You can go to download mode by "adb reboot download" , i think it cant success without wipe.
Or maybe try to flash a rom with 5 files as SuperAce609 said.

No. You can't flash 2.3.6 directly.
You need to flash 2.3.3 first , then 2.3.4 and last 2.3.6 using Odin.
Sent from my impulses.

yeowwwai said:
No. You can't flash 2.3.6 directly.
You need to flash 2.3.3 first , then 2.3.4 and last 2.3.6 using Odin.
Sent from my impulses.
Click to expand...
Click to collapse
no need for that bro !!!!
@OP
just go to recovery > factory reset(wipe data)
and then reboot......Ur done
so simple.....

lol. u guys didnt even try to understand what his problem in the first place. atleast read the first post properly before giving suggestions.
the poor guy had his vol up and down button broke, and u suggest him to wipe data in recovery.
thing is his vol up and downn button doesnt work! so how can he navigate in recovery? lol
btw op, u said that u flashed onepackagee file via odin. so how did u manage to go into download mode in the first place when your vol down button is busted?
if u managed to go into download mode again, this time flash the full package instead.

SuperAce609 said:
One package? Aren't you supposed to use the one with the 5 different files and not just one? To make a completely clean stock rom install, I mean. If that's what you want.
Click to expand...
Click to collapse
I am having the same problem.
The phone keeps rebooting on startup. The phone can go in download mode but can't go in recovery mode.
Do you know any good link to download multi file package? I can't seem to find it anywhere

which Rom You were using and which firmware do you want?

keki92 said:
which Rom You were using and which firmware do you want?
Click to expand...
Click to collapse
My phone was running 2.2.1 Froyo. I tried to upgrade it to 2.3.6 using process mentioned here. http://androidadvices.com/update-gal...wktm-firmware/
The Odin completed successfully and restarted the phone. But the phone was running spanish language. I was getting an alert after every 3-4 seconds. But i could not read it as it was spanish. I restarted the phone and it went in boot loop. The phone keeps rebooting every 2 seconds.
I can't get into recovery mode but I can get to download mode.
I have tried flashing many ROMs from sammobile.com but none of them is working.

Samsung Galaxy S

I installed I897UCJF6-final-CSO REV0 it is Odin3 One-Click downloader and I started it on the PC and USB cable for mobile in PC and installed it. Everything went great and now when I want turn on the phone show me pictures of the "at&t world phone" and mobile phone constantly restarts... not impossible at all turned on. Does anyone know what should I do?

Hi , if you can get into recovery try reflashing ....if you cannot get into recovery you will probably have to get into download mode and flash a stock rom .

imgibby123 said:
Hi , if you can get into recovery try reflashing ....if you cannot get into recovery you will probably have to get into download mode and flash a stock rom .
Click to expand...
Click to collapse
But how to get in download mode? volume down+middle button+power? If is that... this not work Mobile is again restarting.... Can I get on other way to download mode?

rigzrk said:
But how to get in download mode? volume down+middle button+power? If is that... this not work Mobile is again restarting.... Can I get on other way to download mode?
Click to expand...
Click to collapse
you will have to buy a usb jig(ebay £2) this will force download mode.

As long as it boots up, there is no problem. Try the following (you will need some help):
1. Pull the battery
2. Press Volume down+Homebutton+Power at the same time
3. Let a friend put the battery back into the phone while you are pressing the buttons.
Maybe the phone will go into DL mode so you can flash a new ROM. I advise you to flash a clean stock ROM from sammobile.
If this doesn't work, you will need a JIG.
Cheers!

Reboot Loop

Heys guys ive got a problem with my S5830i, i wanted to flash AceCream v1 for the second time but at some point i failed, (i flashed it succesfully first time)
now my phone is Rebooting everytime and black brick appears on the screen covering 4/5 of the Galaxy ace logo
whenever i try to go into CWM, it just reboots.
I've tried odin, won't even connect to the phone.
Does anyone know how o fix that? Help would be really appreciated.

You're able to go to download mode?

jraquino said:
You're able to go to download mode?
Click to expand...
Click to collapse
I can't go to recovery mode, and dunno what Download mode is
is it battery with loading circle on it?

download mode: vol up + vol down + power button
recovery mode: vol up + power + menu.
in order to connect your phone and use odin you should go to download mode.

jraquino said:
You're able to go to download mode?
Click to expand...
Click to collapse
jraquino said:
download mode: vol up + vol down + power button
recovery mode: vol up + power + menu.
in order to connect your phone and use odin you should go to download mode.
Click to expand...
Click to collapse
Yes i can, and it didnt reboot, so it means my phone isn't hard bricked

yes maybe just a soft one. You do know how to use Odin, right? You can flash a stock firmware, there's one thread who has stock firmware just follow the instructions from there. try this. Hope you fix your ace in no time :good:

jraquino said:
yes maybe just a soft one. You do know how to use Odin, right? You can flash a stock firmware, there's one thread who has stock firmware just follow the instructions from there. try this. Hope you fix your ace in no time :good:
Click to expand...
Click to collapse
when i connect my phone to the pc it says failed to install the drivers or something like that, and because of that odin wont recognize my phone
@edit dont need that anymore, just had to reboot the downloader

Qnrx said:
when i connect my phone to the pc it says failed to install the drivers or something like that, and because of that odin wont recognize my phone
Click to expand...
Click to collapse
Try installing the Samsung drivers yourself, I think there is one in Sammobile.com. Not sure though, or just try visiting samsung's website and download the drivers.

Just Google for Samsung mobile usb driver, i have just downloaded it few hours ago.
Sent from my GT-S5830i using xda app-developers app

search SAMSUNG_USB_Driver_for_Mobile_Phones

Stuck after data factory reset.

I'm running streak droid honeycomb. I did a factory data reset through the settings menu and the device reboooted, appeared to be resetting but no I'm stuck on a screen with the android character and a triangle with a red exclamation.
I rooted and installed this so long ago that I'm lost. I mostly mess around with my phone. Any help is appreciated. Thanks

Did you try to get into recovery after charging it? You could reflash that way or nvflash it again.
But WHY THE RUM?!!!

Follow the instructions here:
Streak 7 Flashing Guide
to get into Recovery Mode. Then select option 3; "Factory Reset (User data and Internal tablet storage".
That'll get you back to bone stock assuming all you really did was root it. Done this a bunch of times. It'll work.

joeaux said:
Follow the instructions here:
Streak 7 Flashing Guide
to get into Recovery Mode. Then select option 3; "Factory Reset (User data and Internal tablet storage".
That'll get you back to bone stock assuming all you really did was root it. Done this a bunch of times. It'll work.
Click to expand...
Click to collapse
I hope it's alright I jump in...as I have the same problem. Stock HoneyComb 3.2 not rooted. Would boot up fine, but was unable to get into recovery or fastboot so performed a factory reset through privacy setting and now stuck on the logo. I was (don't know now able to see connect using nvflash but unable to locate any clear instructions on how to flash a ROM (either a new one or stock). Hence the factory reset.
Any help would be greatly appreciated. Thanks...
Jacqueline

JacquiG said:
I hope it's alright I jump in...as I have the same problem. Stock HoneyComb 3.2 not rooted. Would boot up fine, but was unable to get into recovery or fastboot so performed a factory reset through privacy setting and now stuck on the logo. I was (don't know now able to see connect using nvflash but unable to locate any clear instructions on how to flash a ROM (either a new one or stock). Hence the factory reset.
Any help would be greatly appreciated. Thanks...
Jacqueline
Click to expand...
Click to collapse
NVFlash back to 2.2 using this link: http://d-h.st/iXc
After that using its stock recovery, using the factory Update.pkg, update to HC again. All can be found using links from this starting page: http://forum.xda-developers.com/wiki/Dell_Streak_7

wptski said:
NVFlash back to 2.2 using this link: http://d-h.st/iXc
After that using its stock recovery, using the factory Update.pkg, update to HC again. All can be found using links from this starting page: http://forum.xda-developers.com/wiki/Dell_Streak_7
Click to expand...
Click to collapse
Thanks wptski.
Using nvflash I got back to 2.2 but the problem remains that I can't boot into either stock recovery or fastboot in order to install an update.pkg.
I can connect in AXP mode but haven't found any instructions of how I can use it to perform an update or install a custom recovery. It's a problem on the tablet - all the drivers are installed on pc and I've never had any problem in the past, as long as I could get the phone into recovery or fastboot. The symptoms are soft keys light up, battery light flashes 4-5 times and then it shuts down. I can boot up normally into 2.2
I should probably find another forum for my 'new'/old problem...as I'm not stuck at Dell logo anymore :silly:
Jacqui

JacquiG said:
Thanks wptski.
Using nvflash I got back to 2.2 but the problem remains that I can't boot into either stock recovery or fastboot in order to install an update.pkg.
I can connect in AXP mode but haven't found any instructions of how I can use it to perform an update or install a custom recovery. It's a problem on the tablet - all the drivers are installed on pc and I've never had any problem in the past, as long as I could get the phone into recovery or fastboot. The symptoms are soft keys light up, battery light flashes 4-5 times and then it shuts down. I can boot up normally into 2.2
I should probably find another forum for my 'new'/old problem...as I'm not stuck at Dell logo anymore :silly:
Jacqui
Click to expand...
Click to collapse
Okay, to get into the stock recovery and /or Fastboot mode you are holding the up/down volume button and the power ON button at the same time, correct? It does take a 2-3 seconds for either to come up on the screen.
You can't installing anything from APX mode or get into recovery mode from it either.

wptski said:
Okay, to get into the stock recovery and /or Fastboot mode you are holding the up/down volume button and the power ON button at the same time, correct? It does take a 2-3 seconds for either to come up on the screen.
You can't installing anything from APX mode or get into recovery mode from it either.
Click to expand...
Click to collapse
Correct re: stock recovery/fastboot - lights flash shuts down. I can get into APX mode, that's how I got 2.2 on it. I can't find instructions though on how to do anything else with APX - like get into recovery mode The link giveen provided me in another post has a prewritten batch file I used - so my thanks goes to the author.

JacquiG said:
Correct re: stock recovery/fastboot - lights flash shuts down. I can get into APX mode, that's how I got 2.2 on it. I can't find instructions though on how to do anything else with APX - like get into recovery mode The link giveen provided me in another post has a prewritten batch file I used - so my thanks goes to the author.
Click to expand...
Click to collapse
Just to be clear, you are pressing and holding those buttons at the same time for several seconds?

wptski said:
Just to be clear, you are pressing and holding those buttons at the same time for several seconds?
Click to expand...
Click to collapse
correct - left vol button + pwr or right vol button + power: lights flash, turns off - both left and right w/usb connect for apx successful

JacquiG said:
correct - left vol button + pwr or right vol button + power: lights flash, turns off - both left and right w/usb connect for apx successful
Click to expand...
Click to collapse
Have you tried to NVFlash 2.2 again? From your other post, you were on 3.2 before so I'd retry the NVFlash again, at least. It seems that you got into stock recovery mode before so the buttons did work before although I have heard of them getting stuck with both ON.

wptski said:
Have you tried to NVFlash 2.2 again? From your other post, you were on 3.2 before so I'd retry the NVFlash again, at least. It seems that you got into stock recovery mode before so the buttons did work before although I have heard of them getting stuck with both ON.
Click to expand...
Click to collapse
Thanks so much for your help wptski!
I re -nvflash'd 2.2 with the same result....successful flash and can boot into OS. Still unable to get into stock recovery or fastboot. The buttons don't feel stuck - but? Can I use nvflash to get anything other than 2.2 on to it? This all started with wanting nothing more than a 'simple' root Since I"m broken, any chance I can use nvflash to to get TWRP and ICSB4 on it - nothing to lose at this point
Another thought: would moving to a linux machine open up more possibilities?

JacquiG said:
Thanks so much for your help wptski!
I re -nvflash'd 2.2 with the same result....successful flash and can boot into OS. Still unable to get into stock recovery or fastboot. The buttons don't feel stuck - but? Can I use nvflash to get anything other than 2.2 on to it? This all started with wanting nothing more than a 'simple' root Since I"m broken, any chance I can use nvflash to to get TWRP and ICSB4 on it - nothing to lose at this point
Click to expand...
Click to collapse
Here's a test to see if your buttons are stuck since you have the NVFlash drivers installed, with the S7 OFF just plug into your PC, if you hear the normal audio sound when you plug in something into your USB port, they are stuck. Not sure if it would boot normally with stuck buttons.

wptski said:
Here's a test to see if your buttons are stuck since you have the NVFlash drivers installed, with the S7 OFF just plug into your PC, if you hear the normal audio sound when you plug in something into your USB port, they are stuck. Not sure if it would boot normally with stuck buttons.
Click to expand...
Click to collapse
no sound when turned off and plugged into usb

JacquiG said:
no sound when turned off and plugged into usb
Click to expand...
Click to collapse
Only one last suggestion is to redownload 2.2 and flash again.

wptski said:
Only one last suggestion is to redownload 2.2 and flash again.
Click to expand...
Click to collapse
Thanks, I'll try that. Is there maybe another download I should try with md5 check? Or just use the same one I have?
Third time's a charm?! :fingers-crossed:
Update: unfortunatley, no change. I guess for now my Streak is stuck on 2.2 and I'll use it as an alarm clock
Thanks so much for your help!

JacquiG said:
Thanks, I'll try that. Is there maybe another download I should try with md5 check? Or just use the same one I have?
Third time's a charm?! :fingers-crossed:
Update: unfortunatley, no change. I guess for now my Streak is stuck on 2.2 and I'll use it as an alarm clock
Thanks so much for your help!
Click to expand...
Click to collapse
I can put my copy in DropBox and give you the link if you want?
Here's a link to my copy: https://dl.dropboxusercontent.com/u/21386595/Restore to 2.2.rar

Help me , my phone doesn't start !!!

Hello everybody, my phone doesn't start.
He starts just on mode downloading after branch in USB.
Help me please.
Sorry for my English.

if download mode works, try install stock rom through odin then u can do whatever u want

MariusiK31 said:
if download mode works, try install stock rom through odin then u can do whatever u want
Click to expand...
Click to collapse
I have already tried him and when he gives restart on Odin, my telephone does not start.

enzoo96 said:
Hello everybody, my phone doesn't start.
He starts just on mode downloading after branch in USB.
Help me please.
Sorry for my English.
Click to expand...
Click to collapse
try to take out battery for a minute then put it back and switch on

enzoo96 said:
I have already tried him and when he gives restart on Odin, my telephone does not start.
Click to expand...
Click to collapse
u mean bootloops or doesn't start at all ? can u enter cwm ?

MariusiK31 said:
u mean bootloops or doesn't start at all ? can u enter cwm ?
Click to expand...
Click to collapse
He does not start, and I can not enter it cwm

Hard brick?
If so, sending it to a Samsung Center is your best bet.
Sent from my CM7 GT-S5570I

NightRaven49 said:
Hard brick?
If so, sending it to a Samsung Center is your best bet.
Sent from my CM7 GT-S5570I
Click to expand...
Click to collapse
+1 it's hard bricked

same thing happen to me
I experience that too last 6months to be exact, as long as you can access download mode and it is readable by your laptop/computer you can fix it, download any ONE PACKAGE stock room in firmware.com then flash it via Odin after that process finish
go to cwm
just power button + home button
then reset and wipe
please feedback as soon as you do my tips thanks!
goodluck! :good::good:

grimmjowjak said:
I experience that too last 6months to be exact, as long as you can access download mode and it is readable by your laptop/computer you can fix it, download any ONE PACKAGE stock room in firmware.com then flash it via Odin after that process finish
go to cwm
just power button + home button
then reset and wipe
please feedback as soon as you do my tips thanks!
goodluck! :good::good:
Click to expand...
Click to collapse
I flashed and I can not go to cwm

enzoo96 said:
I flashed and I can not go to cwm
Click to expand...
Click to collapse
how about normal booting after flashing via odin?

grimmjowjak said:
how about normal booting after flashing via odin?
Click to expand...
Click to collapse
It's doesen't start

Blank Screen
I installed the wrong cwm on mine and when I tried to boot into recovery all I got was a blank screen, so I waited for a bit, then pulled the battery, turned phone on and nothing but a blank screen, tried getting into DL mode and nothing, but when I plug it into the PC, it wants to recognize as a modem instead. I think its toast, I even made a jig, tried getting into DL mode and nothing, the phone is on just no screen, it charges the battery when plugged into usb port but nothing on the screen. It had worked until I flashed cwm on it...

go to stock recovery
why don't you just enter into stock recovery and factory reset the phone , you can also flash the stock rom with odin after puting your phone in download mode . to go to recovery vol+ and vol- and power on the phone at te same time

Didn't you read? He has neither download nor recovery mode.
Sent from my CM7 GT-S5570I