Related
I recieved my tilt from Amazon roughly aweek ago. Everything was going fine up until not to long ago. The screen stopped registering any screen taps from the stylus or my finger while everything else worked just fine. I reset the unit a few times hoping to resolve the issue. Nothing. THEN I made the big mistake of hard resetting the unit. Now i get to the calibration screen and no further. Anyone got any ideas? Any idea where I can take this to get looked at? i was contemplating sending it to Amazon as defective but ive already flashed the HTC Rom to it shortly after recieving it. Am I completely screwed? Help!!
hollowground said:
I recieved my tilt from Amazon roughly aweek ago. Everything was going fine up until not to long ago. The screen stopped registering any screen taps from the stylus or my finger while everything else worked just fine. I reset the unit a few times hoping to resolve the issue. Nothing. THEN I made the big mistake of hard resetting the unit. Now i get to the calibration screen and no further. Anyone got any ideas? Any idea where I can take this to get looked at? i was contemplating sending it to Amazon as defective but ive already flashed the HTC Rom to it shortly after recieving it. Am I completely screwed? Help!!
Click to expand...
Click to collapse
you could try reflashing the original ROM
Yeah, I tried that shortly after making my original post. Still nothing. I'm curious if the cable for the digitizer came loose somehow (no idea how though) or if it is an actual hard ware issue.
I thought something was wierd when it was working though. When I used the stylus the taps were very inaccurate recently. More so towards the upper hight hand corner of the screen. Calibrated it a few times hoping to correct it but it was always slightly off still. Then it just stopped working all together.I thought it had something to do with my screen protector but after removal was still a no go.
Luckily I am still able to make phone calls thanks to the slide out keyboard. Not sure if it rings or anything when I recieve one though. Still stuck at the calibration screen Any other ideas?
What size star key is needed to disassemble the tilt/tytn II? I may try taking a look inside to see whats up.
hollowground said:
Yeah, I tried that shortly after making my original post. Still nothing. I'm curious if the cable for the digitizer came loose somehow (no idea how though) or if it is an actual hard ware issue.
I thought something was wierd when it was working though. When I used the stylus the taps were very inaccurate recently. More so towards the upper hight hand corner of the screen. Calibrated it a few times hoping to correct it but it was always slightly off still. Then it just stopped working all together.I thought it had something to do with my screen protector but after removal was still a no go.
Luckily I am still able to make phone calls thanks to the slide out keyboard. Not sure if it rings or anything when I recieve one though. Still stuck at the calibration screen Any other ideas?
What size star key is needed to disassemble the tilt/tytn II? I may try taking a look inside to see whats up.
Click to expand...
Click to collapse
If you're stuck at the calibration screen after a hard reset, how are you able to receive calls? Surely the reset hasn't completed?!?
Also, if you have reflashed to the original ROM, and thats now stuck also, then it has least got the correct ROM image on the device, thus allowing you to return it for a replacement.
Still a little confused about how you're able to use it at all though...
i honestly though it wierd myself. after flashing back to the original rom. at the calibration screen if i slide out the keyboard, press the talk button , close then reopen the keyboard, it lets me dial out using the number keys on the keyboard.
I can actually make out the home page behind the calibration screen as the screen reorientates itself.
edited Well I've no idea what just happened but the screen just stared working again out of the blue. My dog jumped on the bed n stepped on it ant the cursor moved. Very weird. Damn I'm lucky. lol Thanks for the input guys. Lets just hope it doesn't happen again XD
return it ..
kash04 said:
return it ..
Click to expand...
Click to collapse
I agree, sounds like a loose connection somewhere
Could be grit between the screen and frame
One of my friends had an XDA Orbit and he had this problem. It turned out it was a crumb or piece of grit wedged between the frame of the phone and the screen causing the screen to be permanently pressed at that point. He used some fine implement (maybe a pin - can't remember) to dig it out. If this was the problem with your phone that may explain why it suddenly started working viz the bit of grit became dislodged by itself.
Cheers,
Ashley
hollowground said:
i My dog jumped on the bed n stepped on it ant the cursor moved. Very weird. Damn I'm lucky. lol Thanks for the input guys. Lets just hope it doesn't happen again XD
Click to expand...
Click to collapse
Thats doggone lucky!! Just another reason to have a dog around...
My Xperia is messed up....
Has NO damage... No water damage, hasnt been dropped, overheated or anything...
Last night I was going to respond to a text and slid out the keyboard and the screen went blue... okay...weird... slid it back, still blue. So I restarted it. Heard the "ding" for the power off button. Turned it off. Turned it back on. Started to respond again. Slid it out... No blue screen, just had black and white lines, then went black, but it would never come back to the regular screen.
I have NO idea what triggered this. NONE. I've had no problems with my phone whatsoever.
What I've dont to try and fix it:
-Turn it on and off (obviously, to get the screen back on)
-battery pull
-sim pull
-hard reset
I bought the phone off of EBay. Has no warranty. I got a warranty with Squaretrade for my fiance's cell phone and when he needed to make a claim (it would power off when it was clammed shut...no damage to it. Also you couldnt hear out of the phone at all)) they said they couldnt do anything. I decided that was worthless and that I'm not going to get a warranty with them. Smart move not getting one period, but Ive had bad expierences with them anyways...
What else can I do? I'm @ a total loss... I don't know what else I can do since I've dont the hard reset. I'm trying to avoid taking it to a cell phone repair place b/c I have a hard time trusing people with electronics now (long story) unless I know you.
Thanks for reading and helping if you can!!
Erinc2005 said:
My Xperia is messed up....
Has NO damage... No water damage, hasnt been dropped, overheated or anything...
Last night I was going to respond to a text and slid out the keyboard and the screen went blue... okay...weird... slid it back, still blue. So I restarted it. Heard the "ding" for the power off button. Turned it off. Turned it back on. Started to respond again. Slid it out... No blue screen, just had black and white lines, then went black, but it would never come back to the regular screen.
I have NO idea what triggered this. NONE. I've had no problems with my phone whatsoever.
What I've dont to try and fix it:
-Turn it on and off (obviously, to get the screen back on)
-battery pull
-sim pull
-hard reset
I bought the phone off of EBay. Has no warranty. I got a warranty with Squaretrade for my fiance's cell phone and when he needed to make a claim (it would power off when it was clammed shut...no damage to it. Also you couldnt hear out of the phone at all)) they said they couldnt do anything. I decided that was worthless and that I'm not going to get a warranty with them. Smart move not getting one period, but Ive had bad expierences with them anyways...
What else can I do? I'm @ a total loss... I don't know what else I can do since I've dont the hard reset. I'm trying to avoid taking it to a cell phone repair place b/c I have a hard time trusing people with electronics now (long story) unless I know you.
Thanks for reading and helping if you can!!
Click to expand...
Click to collapse
Search the forum?
All I can find is if the screen is already dead or whatnot....I've already searched before I posted. I didnt want to post a worthless thread.
how long have you own the phone..?
and what rom do you use?...
Arju007 said:
how long have you own the phone..?
and what rom do you use?...
Click to expand...
Click to collapse
Since about March of this year, and ROM--WM 6.1
Go to the service centre and maybe ask them to quote a price, i had this problem
dadeadman said:
Go to the service centre and maybe ask them to quote a price, i had this problem
Click to expand...
Click to collapse
Did yours just happen for no reason?...Out of the blue?
I have this problem on one of mine also....it appears the flexribbon has gone bad...lcd is good....but when the keyboard slides out the screen goes black...tried another board and lcd in the phone problem still persists...this only leaves the ribbon as the culprit.
Regards,
WC
Wild Child said:
I have this problem on one of mine also....it appears the flexribbon has gone bad...lcd is good....but when the keyboard slides out the screen goes black...tried another board and lcd in the phone problem still persists...this only leaves the ribbon as the culprit.
Regards,
WC
Click to expand...
Click to collapse
Ill be sure to tell the people @ the service center what the problem could be. That helps alot. Upsets me that I had to do a hard reset for no reason and mess my phone all up, oh well!
Erinc2005 said:
Did yours just happen for no reason?...Out of the blue?
Click to expand...
Click to collapse
Yup out of the blue
same problem here wildchild is correct its the rigid flex ribbon. unfortunately it will take a month before the parts arrive since its not readily available at Sony Ericsson service centers...
Unfortunately i just got this problem yesterday.
Suddenly, when i slide out the keyboard, screen fades and goes black.
When i slide it back screen is still on but black.
To bring it back i just click power button twice to put it to sleep and wake it up again. I assume this is the same problem and the ribbon cable is loose, correct ??
I was thinking of following one of the disassembly vids to try and open it and make sure the cable is connected correctly.
What do you guys think ? Give it a shot or too risky?
I am not sure if the ribbon cable is damaged and am assuming its just loose because the screen works fine without the keyboard out.
Any advice would be appreciated.
P.S - had the xperia 3 weeks now, bought it used (about 6 months) with no warranty, Its X1i running Energyrom 3.0 (05/08) build.
A month?? Man, that's a long time... geeee wiz. I asked them asn they said about 7-10 busimess days, so we will see... but I trust it'll be about a month since you said they don't have the parts. I shipped it off Friday, put insurance on it, and said a prayer. I hate my Quickfire, its my backup phone... HATE, LOATHE.... DIEEEEE lol.
Ive been searching for other phones to replace this one if i continue to have other problems... but i cant find one I like. i Love WM, the QWERTY, and touch. Felt like i was send my child off to school or something.
I was actually able to find the flex ribbons on ebay took 6 days to get them from china, bought two of them since I have 2 sitting here with the same exact issue....they were about 60 dollars a piece and are here already...will report back after I repair the phones....
Regards,
WC
hey man.. i got the same thing happened to my phone also.. slice keyboard out screen gose black... but phone is still running... why dont chu try the black card in ur box... give them a ring they should help u out... i bought my from ebay also... but lucky is a x1a so in melb which telstra sale it... check urs if is a x1a or not.. it should come with a warranty for 12 months... hope this can help...
I have this also, my pghone is 5 months old. Senrt it away and they didnt have parts. After 3 weeks Sony sent an exchange unit. Opened up the box but the exchange unit is broken! The optical pad doesnt work at all and when I make calls no one can hear me at all..
I had exactly the same problem, besides the regulary cracks
So ive send it in, and a week later ill got a new one. Even with a second battery lol.
The flex cable fixed my issue....so to confirm this is the issue....repaired mine this evening, working perfect, abit tricky to get it all apart but is doable....
Regards,
WC
I got my phone back from Sony on the 9th. They said there was a loose part. I sent it off on Aug 28, and got there on Sept 2, so it didnt take long at all like I thought it would. I was so tired of the other phone. Sad when a phone runs your life haha.
That was such a nice day...went and got fitted for contacts for the first time as well as a getting a new vision rx, came home with perfect vision and what was on my door step, my beloved X1i. I smiled sooooo big. I didnt expect it for a month! They said it should be 7-10 days at the service center though when I called them.
It was still under factory warranty, so I did'nt have to pay for the repair, but I sure would have paid if I had to... lol.
sigh having the same problem now
i used to be excited to put my treo 750 to sleep before when i changed to x1. but apparently i keep taking it out of the box again everytime i have to get my x1 repaired
i just got it back 2 weeks ago when i got fed up with the keyboard button problem.
now it seems i have to bring it back once again since the screen goes blank on me when i slide out the keyboard
hopefully they can fix it on the spot, maybe just a loose connection as compared to a broken ribbon.
was hoping to use the GPS when i go out of the country, paid and got the needed maps already. but i have only a week before i leave. hopefully itll get fixed by then
I only discovered the touchscreen issue yesterday doing the test of the other thread. So, i would like to every z1 owner to answer this pool to know how bad things are and if we can try to find a solution, since i think Sony won't.
So, please answer the poll and post any useful information. I'll start.
My phone model is C6943, I currently don't use case and I'm using a screen protection. I can do the xperia touchscreen test without touching the phone body without problem and also doesn't have problem with pattern password.
ffp. said:
I only discovered the touchscreen issue yesterday doing the test of the other thread. So, i would like to every z1 owner to answer this pool to know how bad things are and if we can try to find a solution, since i think Sony won't.
So, please answer the pool and post any useful information. I'll start.
My phone model is C6943, I currently don't use case and I'm using a screen protection. I can do the xperia touchscreen test without touching the phone body without problem and also doesn't have problem with pattern password.
Click to expand...
Click to collapse
Pool? I think you mean "poll"
My 6902 is completely screwed. At first I used a screen protector and the problem wasn't too bad. Then I removed it when I took the phone in to get another issue fixed and soon after that the problem got very bad. I was traveling so couldn't go back to the service center. Now it's a bit better, randomly works and randomly doesn't. When I was home in cold weather though it seemed a lot worse than it is now that I'm back in India where it's warm. Not sure if temperature is a factor, or could be conscience. But a few weeks ago it was so bad you couldn't type even a two letter word using Swype.
Also, I now have a part of my screen in the form of a horizontal line where touch doesn't work at all. No single touch and no drag. Completely dead. Taking it to the service center soon.
You should vote on the first option, then
Guys, check my post "News from whats is causing touch screen problem" to see if is your case!
ghostman2 said:
Guys, check my post "News from whats is causing touch screen problem" to see if is your case!
Click to expand...
Click to collapse
It's not.
I got problem unlocking with patterns, scrolling pages and when I play some games after few minutes it stop working so I voted the first option. My phone is back to Sony, I hope they know what to do and at last it's Made in China.
Please, post if you use case and screen protections too. This could help understanding the problem.
Additional data : Z1 is being handled in a leather case, back and screen protector removed ( not the one with the logo, the plastic ones that makes your camera blurry )
Touchscreen problem seen in the game Alien Shooter, after some playing, the touch screen becomes less and less responsive ( i tap a button to shoot and use some onscreen joystick to move ) - both become unresponsive/less responsive as you play and the phone gathers some heat ( you can feel the touchscreen becoming hotter )
i have a simple tpu case, i had a bit of problem when playing all touch-based games (not ones with gyro like asphalt).
ever since i got the case it's better, i have the ASF and nillkin matte screen protector
ffp. said:
Please, post if you use case and screen protections too. This could help understanding the problem.
Click to expand...
Click to collapse
I did not use any case just a chip screen protector. Anyway on a good healthy touch screen the screen protector should not influence the touch screen respond.
Hey guys, I have also this touchscreen issue, and I would appreciate if you give a feedback about warranty service, if sony accepted the problem and replaced a touchpanel or not, and also if the replaced touchscreen is better or not. I´m also thinking about sending it back for warranty repair.
I have also found that my phones touch screen is temperature sensitive, when it get cold or warm it just refuses to detect touch actions. Try it yourself put the phone into cold/hot water for 5 second, take it out, quickly clean the display from water and test the touchscreen. I first tought this behavior is normal and I didn´t cared until I started to play games. After 15minutes of playing the touchscreen bug every time appears. But also after a while its randomly disappears. So this thing is strange. (the bug appears identically also when I have my phone in a plastic case)
Vippo321 said:
Hey guys, I have also this touchscreen issue, and I would appreciate if you give a feedback about warranty service, if sony accepted the problem and replaced a touchpanel or not, and also if the replaced touchscreen is better or not. I´m also thinking about sending it back for warranty repair.
I have also found that my phones touch screen is temperature sensitive, when it get cold or warm it just refuses to detect touch actions. Try it yourself put the phone into cold/hot water for 5 second, take it out, quickly clean the display from water and test the touchscreen. I first tought this behavior is normal and I didn´t cared until I started to play games. After 15minutes of playing the touchscreen bug every time appears. But also after a while its randomly disappears. So this thing is strange. (the bug appears identically also when I have my phone in a plastic case)
Click to expand...
Click to collapse
For me the warranty worked perfectly, i changed the phone 3 times until get a working one, i called Sony, discribed my problem and they changed for me, only 2 days for the change. BUT i recorded the problem and sent to them, so they accept the change.
Vippo321 said:
Hey guys, I have also this touchscreen issue, and I would appreciate if you give a feedback about warranty service, if sony accepted the problem and replaced a touchpanel or not, and also if the replaced touchscreen is better or not. I´m also thinking about sending it back for warranty repair.
I have also found that my phones touch screen is temperature sensitive, when it get cold or warm it just refuses to detect touch actions. Try it yourself put the phone into cold/hot water for 5 second, take it out, quickly clean the display from water and test the touchscreen. I first tought this behavior is normal and I didn´t cared until I started to play games. After 15minutes of playing the touchscreen bug every time appears. But also after a while its randomly disappears. So this thing is strange. (the bug appears identically also when I have my phone in a plastic case)
Click to expand...
Click to collapse
Same here. I sent my phone back last week to the store where I bought it 2 months ago. They will send the phone to Sony Center but the time for repair or replace the device will not be 2 or 3 days but from 2 weeks to no eta. When the phone will come back to the store they will send the phone to me. I will post if the problem persist or not.
The problem is if they return a phone with the same problem.
ffp. said:
The problem is if they return a phone with the same problem.
Click to expand...
Click to collapse
They should be aware about this issue even on the new device so at this time they probably will check that but if they return a phone with the same problem, I will send it back again like many did. Someone had to replace the phone 3 times and I will do the same.
IYeah, you will be a long time without your phone though. I think I'll wait a bit since i rarely get the error and actually only when i try to reproduce it. How bad was yours?
ffp. said:
IYeah, you will be a long time without your phone though.
Click to expand...
Click to collapse
What I can do, I want a fully working Z1, I paid for it.
ffp. said:
I think I'll wait a bit since i rarely get the error and actually only when i try to reproduce it. How bad was yours?
Click to expand...
Click to collapse
I was able to reproduce the problem in many ways, Touch Screen Test, Opening the phone with Patterns, Scrolling Pages or with Launcher instead of switch the page it was opening the applications and at last when I was gaming at one point the touch stopped working and I had to wait, so this made my mind to send it back. On daily use was all ok but in some circumstances was frustrating.
i had the problem with cm11. and when I retored to stock then the problem was gone:S
I'm on stock and I got the problem.
Today for the first time I got the problem when writing on handrite. So I thought about using my phone warranty to get anotehr one. But it don't always fails when i do the method to reproduce it. So, how do you test if your new phone is working and how do you prove that it isn't? I mean what if i take the phone to warranty and it works?
And for you who already changed phone, it is working?
ffp said:
'm on stock and I got the problem.
Today for the first time I got the problem when writing on handrite. So I thought about using my phone warranty to get anotehr one. But it don't always fails when i do the method to reproduce it. So, how do you test if your new phone is working and how do you prove that it isn't? I mean what if i take the phone to warranty and it works?
And for you who already changed phone, it is working?
Click to expand...
Click to collapse
For me after the 3rd change is working now, here is what i did: i recorded the error and send it togheter with the phone. They saw the video and changed imediately.
Sent from my C6943 using xda app-developers app
Did youu made the method to reproduce and it didn't failed? For how long do you have the 3rd phone?
Hi guys,
My Xperia ZR started behaving abnormally some days back, I put "screentouchtest" app and found that there were random inputs on the phone which made the phone go useless... Check the screen shot attached.
So I tried to make an app that will disable only that part on my screen and I was successful at it... Check screenshot attached. I could then at least use my phone to some extent.
But now the frequency of these random touch inputs have increased and that has made it again go unusable...
Problem is that I made this app as a floating app and whenever user touches other part of the phone , touch below the unblocked area is activated.
SO now I wanted to disable the touch completely over this area...any help will be appreciated.
Sony says it is due to water logging in the motherboard and no warranty will be given.
You are not alone!
Having the same problem here. Random touch inputs on the top right corner of device. I can assure you it's not because of water log of any sorts because i have opened ,checked, dried and even tested the touch display. Its a software related issue I guess which I am not able to pinpoint or understand. I wish someone from the forum helps with it.
water logging? did your phone get wet some time? its waterproof phone and no warranty given? :laugh: screw sony in consumer court
highevolutionary said:
Having the same problem here. Random touch inputs on the top right corner of device. I can assure you it's not because of water log of any sorts because i have opened ,checked, dried and even tested the touch display. Its a software related issue I guess which I am not able to pinpoint or understand. I wish someone from the forum helps with it.
Click to expand...
Click to collapse
If you think its a software problem, i'll try putting some custom ROM.
sourabhp said:
water logging? did your phone get wet some time? its waterproof phone and no warranty given? :laugh: screw sony in consumer court
Click to expand...
Click to collapse
Yeah I know Its waterproof. My brother was using it so not sure if there was water logging. But when we went to customer service the condition of the mobile was not good(Plastic that covers charging port was loose) so couldnt fight actually.
Custom rom doesn't help
Engic0 said:
If you think its a software problem, i'll try putting some custom ROM.
Yeah I know Its waterproof. My brother was using it so not sure if there was water logging. But when we went to customer service the condition of the mobile was not good(Plastic that covers charging port was loose) so couldnt fight actually.
Click to expand...
Click to collapse
Sorry to say unfortunately custom ROM doesn't help either. After I installed one just to see if the problem persists, To my surprise it didn't! But after a week or so the pendulum was back to square one. So I had to roll back. I really don't know how to go about this problem I think the problem is because of a bug of some sorts which causes the chip to send signals to the display addressing that its being touched or whatever. Anyway this is just my guess. You can try installing a custom ROM for your device and see if the issue ceases. In that case my problem would be just device specific. Do share your results after you install a custom ROM :good:.
highevolutionary said:
Sorry to say unfortunately custom ROM doesn't help either. After I installed one just to see if the problem persists, To my surprise it didn't! But after a week or so the pendulum was back to square one. So I had to roll back. I really don't know how to go about this problem I think the problem is because of a bug of some sorts which causes the chip to send signals to the display addressing that its being touched or whatever. Anyway this is just my guess. You can try installing a custom ROM for your device and see if the issue ceases. In that case my problem would be just device specific. Do share your results after you install a custom ROM :good:.
Click to expand...
Click to collapse
May be there is a problem with the touch digitizer under the LCD panel which is misbehaving. No software can fix it. You will need to replace the touch digitizer along with LCD screen as they are sold as single unit. Check online if you can find the parts and ask any local mobile repairer to replace it. :good:
NO Luck with Custom ROM
I put Android Lollipop (CM12 Port) and there have been no change. Looks like the problem is with digitizer, last time I told local repair shop to replace the screen they said they cant separate the screen and had no clue. But I searched and found out from youtube videos that it can be done. Now all I have to do is buy Screen+Digitizer.
As you can see the random touch strip have moved little upwards from my earlier screenshots. That happened months back. If anyone wants the app I made then let me know. It helps me to some extent.
Engic0 said:
I put Android Lollipop (CM12 Port) and there have been no change. Looks like the problem is with digitizer, last time I told local repair shop to replace the screen they said they cant separate the screen and had no clue. But I searched and found out from youtube videos that it can be done. Now all I have to do is buy Screen+Digitizer.
As you can see the random touch strip have moved little upwards from my earlier screenshots. That happened months back. If anyone wants the app I made then let me know. It helps me to some extent.
Click to expand...
Click to collapse
LCD with digitizer is around INR 4000
Which app did you make? What does it do?
sourabhp said:
LCD with digitizer is around INR 4000
Which app did you make? What does it do?
Click to expand...
Click to collapse
Where can I buy 1? Online? Link Please...
Since there are random touches on my phone, I made app that blocks this touch... Check the screenshots, I have "Show Touches" Option ON from Developer Settings. This makes all the touches show white marker... So I made app that floats over the screen and wont show any response when there are touches over that area. "Semi Transparent Area" in the screenshot - Touch wont work over that part. App wont completely disable the touch though, if we press other part of screen for that time app gets disabled...
Engic0 said:
Where can I buy 1? Online? Link Please...
Since there are random touches on my phone, I made app that blocks this touch... Check the screenshots, I have "Show Touches" Option ON from Developer Settings. This makes all the touches show white marker... So I made app that floats over the screen and wont show any response when there are touches over that area. "Semi Transparent Area" in the screenshot - Touch wont work over that part. App wont completely disable the touch though, if we press other part of screen for that time app gets disabled...
Click to expand...
Click to collapse
https://www.google.co.in/?gfe_rd=cr&ei=8BTTVIDzOc6AuASH8oCQCQ&gws_rd=ssl#q=sony+xperia+zr+lcd
Use google with different keywords
sourabhp said:
https://www.google.co.in/?gfe_rd=cr&ei=8BTTVIDzOc6AuASH8oCQCQ&gws_rd=ssl#q=sony+xperia+zr+lcd
Use google with different keywords
Click to expand...
Click to collapse
lol Okay
SOLUTION!!
Engic0 said:
lol Okay
Click to expand...
Click to collapse
Finally, a solution. Time for a digitizer+screen. Thank you guys.
Hey what is the app you made? I'm in the same boat but can't really afford a new digitizer....
Yep i need it too. It will be greatly appreciated if you share your app here. Thanks in advance.
Sent from my Sparkle V using Tapatalk
sorry guys for late reply!
I am attaching the apk here...
I have this problem too but it only happens if the phone screen get wet
Some time it happen randomly but when i press on the screen at bottom and on led gently it disappear and back to normal
Thank you!
The Float APK solved the major issue of my faulty touch screen in my Nexus 4. There are two lines in my screen where the touch is not working anymore. One of them is having several crazy clicks making my phone somehow useless. By using this app, I can prevent that, which is great!
Two issues I've got:
- the textbox to set the distance from the top is located exactly in the first dead line! So I need to turn my phone sideways to be edit to click there and edit its value.
- when using the phone in horizontal mode, blocked zone turns as well, but the faulty zone is fixed there.
I'm wondering if you might share with us the source code or maybe you consider to make some improvements on it?
Thank you so much for sharing this app here!
thanks for this app solution.
I too have problem of ghost touches. This app definately helps with that and makes the phone somewhat usable again.
The only problem is that some ghost touches are continous (it's like someone presses their finger on the screen and keeps holding it there). This makes action by other touches unresponsive.
Maybe we can find a solution for this in the float app?
Source code for the app
Finally since many of you requested, here is the source code! - Stop Touch - Source Code
My phone's screen just went black suddenly while i was using the phone last night. Nothing i do will wake the screen up, i tried rebooting by holding the power button, tried power+volume down also to boot into recovery .. no response. However the phone seems to be functioning as i can hear the screen lock sound. I think im stuck on the pin screen (the one to pass the boot-up-encryption). theres some vibration and feedback when i randomly press on the screen too.
The device is running Stock 6.0.1 , unrooted , stock kernel. Has this ever happened to anyone else ? could it be a software issue ?
I believe the LCD panel just went dead ..
Thanks!
Have you hooked it up to a computer and tried to see if it's recognised by ADB?
moses992 said:
My phone's screen just went black suddenly while i was using the phone last night. Nothing i do will wake the screen up, i tried rebooting by holding the power button, tried power+volume down also to boot into recovery .. no response. However the phone seems to be functioning as i can hear the screen lock sound. I think im stuck on the pin screen (the one to pass the boot-up-encryption). theres some vibration and feedback when i randomly press on the screen too.
The device is running Stock 6.0.1 , unrooted , stock kernel. Has this ever happened to anyone else ? could it be a software issue ?
I believe the LCD panel just went dead ..
Thanks!
Click to expand...
Click to collapse
I had a nexus that had a faulty screen and randomly shut off or something half the screen will glitch out and one day it just stopped working but I could hear the lockscreen sounds. Your best bet would be to send it in for service maybe its a loose connecting or a hardware issue. When mine started acting up it was a loose connecting so if I hit the phone with my hand it would go back to normal and then it stopped working. Its a common issue if you do a google search many people have encountered this
That sounds to me like a return-under-warranty job. If you were in the UK you could quote the Sale of Goods Act, which specifies that an item must be of suitable quality and last a reasonable amount of time, but in my case when I returned my faulty N5 to Google after 18 months they were as good as gold, didn't quibble, simply replaced it with a refurbished one which appeared to me to be indistinguishable from brand new.
Since by definition your phone must be very close to its warranty period, depending on when you got it, I'd start with that. This is the link I used from the UK - maybe different if you're elsewhere, but you should find a link called "Get a call from a hardware specialist":
https://support.google.com/store/co...roid_help&cfnti=escalationflow.c2c&cft=5&rd=1
Didgeridoohan said:
Have you hooked it up to a computer and tried to see if it's recognised by ADB?
Click to expand...
Click to collapse
Havent done that yet. Only thing that would be good for is making sure its a hardware defect right ?
jazz995756 said:
I had a nexus that had a faulty screen and randomly shut off or something half the screen will glitch out and one day it just stopped working but I could hear the lockscreen sounds. Your best bet would be to send it in for service maybe its a loose connecting or a hardware issue. When mine started acting up it was a loose connecting so if I hit the phone with my hand it would go back to normal and then it stopped working. Its a common issue if you do a google search many people have encountered this
Click to expand...
Click to collapse
That makes sense. could be just a loose connector between the LCD panel and the MoBo ..
Problem is i live in Jordan and I got the phone from Dubai. Its still under warranty of the seller (Souq.com ; an online store .. kind of like Amazon of the middle east ), So i have to send my phone to Dubai to fix it. Now i could just go to a local phone repair shop and ask the guy to check the connectors, but im afraid that would void the warranty and not solve the problem ;( .
dahawthorne said:
That sounds to me like a return-under-warranty job. If you were in the UK you could quote the Sale of Goods Act, which specifies that an item must be of suitable quality and last a reasonable amount of time, but in my case when I returned my faulty N5 to Google after 18 months they were as good as gold, didn't quibble, simply replaced it with a refurbished one which appeared to me to be indistinguishable from brand new.
Since by definition your phone must be very close to its warranty period, depending on when you got it, I'd start with that. This is the link I used from the UK - maybe different if you're elsewhere, but you should find a link called "Get a call from a hardware specialist":
https://support.google.com/store/co...roid_help&cfnti=escalationflow.c2c&cft=5&rd=1
Click to expand...
Click to collapse
I submitted the form , although i live in Jordan which has no presence of Google whatsoever but what the heck !
thanks all for your suggestions.
Google is supposedly a global company...
Let us know how it goes, and good luck.
Well, if you figure out that it is just the screen, you can use this program for basic control with a lot of latency
http://forum.xda-developers.com/showthread.php?t=2786395
It's a little rough and confusing but, it's workable. If you need help setting it up feel free to shoot me a PM.