Hi guys,
My Xperia ZR started behaving abnormally some days back, I put "screentouchtest" app and found that there were random inputs on the phone which made the phone go useless... Check the screen shot attached.
So I tried to make an app that will disable only that part on my screen and I was successful at it... Check screenshot attached. I could then at least use my phone to some extent.
But now the frequency of these random touch inputs have increased and that has made it again go unusable...
Problem is that I made this app as a floating app and whenever user touches other part of the phone , touch below the unblocked area is activated.
SO now I wanted to disable the touch completely over this area...any help will be appreciated.
Sony says it is due to water logging in the motherboard and no warranty will be given.
You are not alone!
Having the same problem here. Random touch inputs on the top right corner of device. I can assure you it's not because of water log of any sorts because i have opened ,checked, dried and even tested the touch display. Its a software related issue I guess which I am not able to pinpoint or understand. I wish someone from the forum helps with it.
water logging? did your phone get wet some time? its waterproof phone and no warranty given? :laugh: screw sony in consumer court
highevolutionary said:
Having the same problem here. Random touch inputs on the top right corner of device. I can assure you it's not because of water log of any sorts because i have opened ,checked, dried and even tested the touch display. Its a software related issue I guess which I am not able to pinpoint or understand. I wish someone from the forum helps with it.
Click to expand...
Click to collapse
If you think its a software problem, i'll try putting some custom ROM.
sourabhp said:
water logging? did your phone get wet some time? its waterproof phone and no warranty given? :laugh: screw sony in consumer court
Click to expand...
Click to collapse
Yeah I know Its waterproof. My brother was using it so not sure if there was water logging. But when we went to customer service the condition of the mobile was not good(Plastic that covers charging port was loose) so couldnt fight actually.
Custom rom doesn't help
Engic0 said:
If you think its a software problem, i'll try putting some custom ROM.
Yeah I know Its waterproof. My brother was using it so not sure if there was water logging. But when we went to customer service the condition of the mobile was not good(Plastic that covers charging port was loose) so couldnt fight actually.
Click to expand...
Click to collapse
Sorry to say unfortunately custom ROM doesn't help either. After I installed one just to see if the problem persists, To my surprise it didn't! But after a week or so the pendulum was back to square one. So I had to roll back. I really don't know how to go about this problem I think the problem is because of a bug of some sorts which causes the chip to send signals to the display addressing that its being touched or whatever. Anyway this is just my guess. You can try installing a custom ROM for your device and see if the issue ceases. In that case my problem would be just device specific. Do share your results after you install a custom ROM :good:.
highevolutionary said:
Sorry to say unfortunately custom ROM doesn't help either. After I installed one just to see if the problem persists, To my surprise it didn't! But after a week or so the pendulum was back to square one. So I had to roll back. I really don't know how to go about this problem I think the problem is because of a bug of some sorts which causes the chip to send signals to the display addressing that its being touched or whatever. Anyway this is just my guess. You can try installing a custom ROM for your device and see if the issue ceases. In that case my problem would be just device specific. Do share your results after you install a custom ROM :good:.
Click to expand...
Click to collapse
May be there is a problem with the touch digitizer under the LCD panel which is misbehaving. No software can fix it. You will need to replace the touch digitizer along with LCD screen as they are sold as single unit. Check online if you can find the parts and ask any local mobile repairer to replace it. :good:
NO Luck with Custom ROM
I put Android Lollipop (CM12 Port) and there have been no change. Looks like the problem is with digitizer, last time I told local repair shop to replace the screen they said they cant separate the screen and had no clue. But I searched and found out from youtube videos that it can be done. Now all I have to do is buy Screen+Digitizer.
As you can see the random touch strip have moved little upwards from my earlier screenshots. That happened months back. If anyone wants the app I made then let me know. It helps me to some extent.
Engic0 said:
I put Android Lollipop (CM12 Port) and there have been no change. Looks like the problem is with digitizer, last time I told local repair shop to replace the screen they said they cant separate the screen and had no clue. But I searched and found out from youtube videos that it can be done. Now all I have to do is buy Screen+Digitizer.
As you can see the random touch strip have moved little upwards from my earlier screenshots. That happened months back. If anyone wants the app I made then let me know. It helps me to some extent.
Click to expand...
Click to collapse
LCD with digitizer is around INR 4000
Which app did you make? What does it do?
sourabhp said:
LCD with digitizer is around INR 4000
Which app did you make? What does it do?
Click to expand...
Click to collapse
Where can I buy 1? Online? Link Please...
Since there are random touches on my phone, I made app that blocks this touch... Check the screenshots, I have "Show Touches" Option ON from Developer Settings. This makes all the touches show white marker... So I made app that floats over the screen and wont show any response when there are touches over that area. "Semi Transparent Area" in the screenshot - Touch wont work over that part. App wont completely disable the touch though, if we press other part of screen for that time app gets disabled...
Engic0 said:
Where can I buy 1? Online? Link Please...
Since there are random touches on my phone, I made app that blocks this touch... Check the screenshots, I have "Show Touches" Option ON from Developer Settings. This makes all the touches show white marker... So I made app that floats over the screen and wont show any response when there are touches over that area. "Semi Transparent Area" in the screenshot - Touch wont work over that part. App wont completely disable the touch though, if we press other part of screen for that time app gets disabled...
Click to expand...
Click to collapse
https://www.google.co.in/?gfe_rd=cr&ei=8BTTVIDzOc6AuASH8oCQCQ&gws_rd=ssl#q=sony+xperia+zr+lcd
Use google with different keywords
sourabhp said:
https://www.google.co.in/?gfe_rd=cr&ei=8BTTVIDzOc6AuASH8oCQCQ&gws_rd=ssl#q=sony+xperia+zr+lcd
Use google with different keywords
Click to expand...
Click to collapse
lol Okay
SOLUTION!!
Engic0 said:
lol Okay
Click to expand...
Click to collapse
Finally, a solution. Time for a digitizer+screen. Thank you guys.
Hey what is the app you made? I'm in the same boat but can't really afford a new digitizer....
Yep i need it too. It will be greatly appreciated if you share your app here. Thanks in advance.
Sent from my Sparkle V using Tapatalk
sorry guys for late reply!
I am attaching the apk here...
I have this problem too but it only happens if the phone screen get wet
Some time it happen randomly but when i press on the screen at bottom and on led gently it disappear and back to normal
Thank you!
The Float APK solved the major issue of my faulty touch screen in my Nexus 4. There are two lines in my screen where the touch is not working anymore. One of them is having several crazy clicks making my phone somehow useless. By using this app, I can prevent that, which is great!
Two issues I've got:
- the textbox to set the distance from the top is located exactly in the first dead line! So I need to turn my phone sideways to be edit to click there and edit its value.
- when using the phone in horizontal mode, blocked zone turns as well, but the faulty zone is fixed there.
I'm wondering if you might share with us the source code or maybe you consider to make some improvements on it?
Thank you so much for sharing this app here!
thanks for this app solution.
I too have problem of ghost touches. This app definately helps with that and makes the phone somewhat usable again.
The only problem is that some ghost touches are continous (it's like someone presses their finger on the screen and keeps holding it there). This makes action by other touches unresponsive.
Maybe we can find a solution for this in the float app?
Source code for the app
Finally since many of you requested, here is the source code! - Stop Touch - Source Code
Related
Hi there. I picked up an important call whilst in the shower. Very little water fell on my Kaiser but I belive that this caused the screen to stop working. Or I have dropped it as well.
Now I tried the business card remove dust particle trick. Didn't work. So I disabled cube / Touchflo. Then I reinstalled my ROM. Basically, I can't align the screen... I tried using the Remote Screen Alignment tool as well.
What's weird is that when you leave the phone for a couple of seconds, the battery conservation feature kicks, and when I touch the screen, the screen powers back up. So I know the screen works but just not properly.
Do I have to replace my screen (or just the TOUCH component of it)? I'm not too good with hardware but can I take it apart and fix the problems?
EDIT: For those facing similar problems, use the trial version of SOTI Pocket Controller to work on your Kaiser remotely.
I'm sure someone knows what to do... please help.
I had the exact same issues you were having, I had to send it in finally so I hope it is warrantied.
jallenclark said:
I had the exact same issues you were having, I had to send it in finally so I hope it is warrantied.
Click to expand...
Click to collapse
nope, its out of warranty. I'm thinking of using pocketpctechs or some other similar service. Any suggestions?
I would just order a new screen and replace it yourself.
jallenclark said:
I would just order a new screen and replace it yourself.
Click to expand...
Click to collapse
Did they replace the entire screen or jus the TOUCH component? I heard that the TOUCH surface is way cheaper.
Also, I'm not too sure how to replace it myself.
when my tilt was in warranty they just gave a new device but on the call they said the screen was dead even though it displayed and had minimal responce.
I could be wrong but I don't think it would be easy (if even possible) to replace just the touch surface of the screen.
Yesterday when i take my milestone out of my pocket I noticed that the Settings touch button(second from left) wasn't working, every other "bar" button was working fine, except that one. Then I noticed there's a vertical line, that goes from the Setting button to the top of the phone that doesn't work. It simply stopped working... Some1 Help me pliz. It' s a Software or Hardware problem, and if it's a Software problem this thing will solve my problem??
globaldirectparts.com/Motorola-A855-Digitizer-p/mot1032930.htm
Thanks Very Much!!
Sounds like your problem is similar to mine:
http://forum.xda-developers.com/showthread.php?t=916527
Lesiroth said:
Sounds like your problem is similar to mine:
http://forum.xda-developers.com/showthread.php?t=916527
Click to expand...
Click to collapse
Are u already solved the problem?
fpatrik17 said:
Yesterday when i take my milestone out of my pocket I noticed that the Settings touch button(second from left) wasn't working, every other "bar" button was working fine, except that one. Then I noticed there's a vertical line, that goes from the Setting button to the top of the phone that doesn't work. It simply stopped working... Some1 Help me pliz. It' s a Software or Hardware problem, and if it's a Software problem this thing will solve my problem??
globaldirectparts.com/Motorola-A855-Digitizer-p/mot1032930.htm
Thanks Very Much!!
Click to expand...
Click to collapse
same with my phone, may be digitizer was broken
Are u using a custom Rom or the Original ? My touchscreen had a similar issue, and reflashing the ROM solved it. It took 2 flashes, but the issue is gone.
Dont know if yours is the same, but if the issue still remains, atleast it can confirmed that its a hardware issue and not a software one.
shreyas99 said:
Are u using a custom Rom or the Original ? My touchscreen had a similar issue, and reflashing the ROM solved it. It took 2 flashes, but the issue is gone.
Dont know if yours is the same, but if the issue still remains, atleast it can confirmed that its a hardware issue and not a software one.
Click to expand...
Click to collapse
I have used CM6 on my phone, but when i got this issue, i made my phone back to 2.1. The problem is still standing.
uh oh. Looks like a Hardware issue then. U still might wanna take to the store and get it verified. Is it still under warranty ? Any possibility of an exchange ?
shreyas99 said:
uh oh. Looks like a Hardware issue then. U still might wanna take to the store and get it verified. Is it still under warranty ? Any possibility of an exchange ?
Click to expand...
Click to collapse
No warranty... :/ I really love this phone..
link: cgi.ebay.com/NEW-Touch-Screen-Digitizer-Motorola-Milestone-A855-/370476035985?pt=PDA_Accessories&hash=item564217af91#ht_997wt_1200[/url]
This may solve my problem??
Havent seen any such issues.. Thanks god..
it's similar to my problem, I had the back button through the top of the screen not working..
I have tried flashing, factory resets, and whatever I can do, but still no changed,, so I tried to ask the closest customer service and they said that it's the touchscreen panel must be thrown away to get the new one..
is it really true ?
please share this problem,,
thanks,,
fckndrmr said:
it's similar to my problem, I had the back button through the top of the screen not working..
I have tried flashing, factory resets, and whatever I can do, but still no changed,, so I tried to ask the closest customer service and they said that it's the touchscreen panel must be thrown away to get the new one..
is it really true ?
please share this problem,,
thanks,,
Click to expand...
Click to collapse
I have bought a new touchpanel today.. now waiting for the shipping.
I will write here, when i replaced it what will happen 2 me.
See u later!
I have a mililar problem, right side of screen wont work... flash to 2.1 dont slove this problem
Hi all!
I was having the same problem with the column of numbers 3, 6, 9 of dialpad. Looking for the solution in google, I have read that this problem is probably caused due to the moisture... so yesterday I turned of my milestone, removed the battery, SIM and SD cards and left it inside an enviromental chamber @ +70 celsius degress for 1 hour and guess what? Problem solved!
I hope that it works for anyone that are having the same problem!
Regards
Lucas
lfsupino said:
Hi all!
I was having the same problem with the column of numbers 3, 6, 9 of dialpad. Looking for the solution in google, I have read that this problem is probably caused due to the moisture... so yesterday I turned of my milestone, removed the battery, SIM and SD cards and left it inside an enviromental chamber @ +70 celsius degress for 1 hour and guess what? Problem solved!
I hope that it works for anyone that are having the same problem!
Regards
Lucas
Click to expand...
Click to collapse
where do you suggest one gets an environmental chamber?
environmentalchambers R'US of course
xploited said:
where do you suggest one gets an environmental chamber?
Click to expand...
Click to collapse
I have had good success with a combo of rice (inside a ziplock bag) to absorb humidity and/or a toaster over at the lowest bake setting.
Worked on MANY electronic devices over the years.
Sent from my Milestone using XDA Premium App
Same problem here. I've solved it by changing the digitizer (ebay 25 euros). Works fine now but in the mean time I change for a Desire HD... good by Milestone !
If you decide to change the digitizer, be patient, fixing th Milestone is not an user friendly task But if you take your time it's ok !
ive the same problem, and i believe that's because of moisture. because every time when its raining except the problem with right side of screen im not even able to use the phone touch screen doesn't work at all and the phone just does something by itself! this issue started with small vertical bar from right side of screen and it growing everyday now im not able to use right side of screen till home button.
i want to know do i have to replace touchscreen or i can fix it with something to absorb humidity?
thanks in advance
I only discovered the touchscreen issue yesterday doing the test of the other thread. So, i would like to every z1 owner to answer this pool to know how bad things are and if we can try to find a solution, since i think Sony won't.
So, please answer the poll and post any useful information. I'll start.
My phone model is C6943, I currently don't use case and I'm using a screen protection. I can do the xperia touchscreen test without touching the phone body without problem and also doesn't have problem with pattern password.
ffp. said:
I only discovered the touchscreen issue yesterday doing the test of the other thread. So, i would like to every z1 owner to answer this pool to know how bad things are and if we can try to find a solution, since i think Sony won't.
So, please answer the pool and post any useful information. I'll start.
My phone model is C6943, I currently don't use case and I'm using a screen protection. I can do the xperia touchscreen test without touching the phone body without problem and also doesn't have problem with pattern password.
Click to expand...
Click to collapse
Pool? I think you mean "poll"
My 6902 is completely screwed. At first I used a screen protector and the problem wasn't too bad. Then I removed it when I took the phone in to get another issue fixed and soon after that the problem got very bad. I was traveling so couldn't go back to the service center. Now it's a bit better, randomly works and randomly doesn't. When I was home in cold weather though it seemed a lot worse than it is now that I'm back in India where it's warm. Not sure if temperature is a factor, or could be conscience. But a few weeks ago it was so bad you couldn't type even a two letter word using Swype.
Also, I now have a part of my screen in the form of a horizontal line where touch doesn't work at all. No single touch and no drag. Completely dead. Taking it to the service center soon.
You should vote on the first option, then
Guys, check my post "News from whats is causing touch screen problem" to see if is your case!
ghostman2 said:
Guys, check my post "News from whats is causing touch screen problem" to see if is your case!
Click to expand...
Click to collapse
It's not.
I got problem unlocking with patterns, scrolling pages and when I play some games after few minutes it stop working so I voted the first option. My phone is back to Sony, I hope they know what to do and at last it's Made in China.
Please, post if you use case and screen protections too. This could help understanding the problem.
Additional data : Z1 is being handled in a leather case, back and screen protector removed ( not the one with the logo, the plastic ones that makes your camera blurry )
Touchscreen problem seen in the game Alien Shooter, after some playing, the touch screen becomes less and less responsive ( i tap a button to shoot and use some onscreen joystick to move ) - both become unresponsive/less responsive as you play and the phone gathers some heat ( you can feel the touchscreen becoming hotter )
i have a simple tpu case, i had a bit of problem when playing all touch-based games (not ones with gyro like asphalt).
ever since i got the case it's better, i have the ASF and nillkin matte screen protector
ffp. said:
Please, post if you use case and screen protections too. This could help understanding the problem.
Click to expand...
Click to collapse
I did not use any case just a chip screen protector. Anyway on a good healthy touch screen the screen protector should not influence the touch screen respond.
Hey guys, I have also this touchscreen issue, and I would appreciate if you give a feedback about warranty service, if sony accepted the problem and replaced a touchpanel or not, and also if the replaced touchscreen is better or not. I´m also thinking about sending it back for warranty repair.
I have also found that my phones touch screen is temperature sensitive, when it get cold or warm it just refuses to detect touch actions. Try it yourself put the phone into cold/hot water for 5 second, take it out, quickly clean the display from water and test the touchscreen. I first tought this behavior is normal and I didn´t cared until I started to play games. After 15minutes of playing the touchscreen bug every time appears. But also after a while its randomly disappears. So this thing is strange. (the bug appears identically also when I have my phone in a plastic case)
Vippo321 said:
Hey guys, I have also this touchscreen issue, and I would appreciate if you give a feedback about warranty service, if sony accepted the problem and replaced a touchpanel or not, and also if the replaced touchscreen is better or not. I´m also thinking about sending it back for warranty repair.
I have also found that my phones touch screen is temperature sensitive, when it get cold or warm it just refuses to detect touch actions. Try it yourself put the phone into cold/hot water for 5 second, take it out, quickly clean the display from water and test the touchscreen. I first tought this behavior is normal and I didn´t cared until I started to play games. After 15minutes of playing the touchscreen bug every time appears. But also after a while its randomly disappears. So this thing is strange. (the bug appears identically also when I have my phone in a plastic case)
Click to expand...
Click to collapse
For me the warranty worked perfectly, i changed the phone 3 times until get a working one, i called Sony, discribed my problem and they changed for me, only 2 days for the change. BUT i recorded the problem and sent to them, so they accept the change.
Vippo321 said:
Hey guys, I have also this touchscreen issue, and I would appreciate if you give a feedback about warranty service, if sony accepted the problem and replaced a touchpanel or not, and also if the replaced touchscreen is better or not. I´m also thinking about sending it back for warranty repair.
I have also found that my phones touch screen is temperature sensitive, when it get cold or warm it just refuses to detect touch actions. Try it yourself put the phone into cold/hot water for 5 second, take it out, quickly clean the display from water and test the touchscreen. I first tought this behavior is normal and I didn´t cared until I started to play games. After 15minutes of playing the touchscreen bug every time appears. But also after a while its randomly disappears. So this thing is strange. (the bug appears identically also when I have my phone in a plastic case)
Click to expand...
Click to collapse
Same here. I sent my phone back last week to the store where I bought it 2 months ago. They will send the phone to Sony Center but the time for repair or replace the device will not be 2 or 3 days but from 2 weeks to no eta. When the phone will come back to the store they will send the phone to me. I will post if the problem persist or not.
The problem is if they return a phone with the same problem.
ffp. said:
The problem is if they return a phone with the same problem.
Click to expand...
Click to collapse
They should be aware about this issue even on the new device so at this time they probably will check that but if they return a phone with the same problem, I will send it back again like many did. Someone had to replace the phone 3 times and I will do the same.
IYeah, you will be a long time without your phone though. I think I'll wait a bit since i rarely get the error and actually only when i try to reproduce it. How bad was yours?
ffp. said:
IYeah, you will be a long time without your phone though.
Click to expand...
Click to collapse
What I can do, I want a fully working Z1, I paid for it.
ffp. said:
I think I'll wait a bit since i rarely get the error and actually only when i try to reproduce it. How bad was yours?
Click to expand...
Click to collapse
I was able to reproduce the problem in many ways, Touch Screen Test, Opening the phone with Patterns, Scrolling Pages or with Launcher instead of switch the page it was opening the applications and at last when I was gaming at one point the touch stopped working and I had to wait, so this made my mind to send it back. On daily use was all ok but in some circumstances was frustrating.
i had the problem with cm11. and when I retored to stock then the problem was gone:S
I'm on stock and I got the problem.
Today for the first time I got the problem when writing on handrite. So I thought about using my phone warranty to get anotehr one. But it don't always fails when i do the method to reproduce it. So, how do you test if your new phone is working and how do you prove that it isn't? I mean what if i take the phone to warranty and it works?
And for you who already changed phone, it is working?
ffp said:
'm on stock and I got the problem.
Today for the first time I got the problem when writing on handrite. So I thought about using my phone warranty to get anotehr one. But it don't always fails when i do the method to reproduce it. So, how do you test if your new phone is working and how do you prove that it isn't? I mean what if i take the phone to warranty and it works?
And for you who already changed phone, it is working?
Click to expand...
Click to collapse
For me after the 3rd change is working now, here is what i did: i recorded the error and send it togheter with the phone. They saw the video and changed imediately.
Sent from my C6943 using xda app-developers app
Did youu made the method to reproduce and it didn't failed? For how long do you have the 3rd phone?
Hello guys, so I recently received an MI5 I ordered on Gearbest, in the 64gb international version (MIUI Global 8.2.2.0).
From day one, the touchscreen had the bad habit of going unresponsive randomly, meaning i have to struggle to swipe/click. Using hard keys (home, power) somehow fixes the issue for a few minutes but that's all. I unlocked the bootloader with Mi Unlock, and tried the latest build of LineageOS, and even flashed next the latest MIUI international developper build (29/06). On all of these 3 ROMs, the issue persists (and I went full wipe each time).
At the phone start, it is generally OK for a bunch of minutes, and then randomly becomes unresponsive.
I searched on the internet and did not find fixes, and i'm still unsure whether it's software or hardware related, even though I fear its the second option.
Would any of you have any more information on this subject?
To rule out any possible software issues, I'd flash the latest stable ROM.
Give that a shot and then see if the problem persists.
Well, the phone came new with the latest MIUI Global ROM (8.2.2.0), and since first start the problem was here. In the beginning I thought that it was just the phone lagging while setting up, but as time passed it was still there, no matter which ROM I flashed.
So, is there a potential software fix, or is this an hardware issue?
I am having the same issue, i hope its not hardware related :/
vlatko98 said:
I am having the same issue, i hope its not hardware related :/
Click to expand...
Click to collapse
Unfortunately, I'm starting to think it is, considering what I found on the internet. I'm kinda deceived by Xiaomi, which I thought was great value for the price. There is not even an official statement about this, even though many users reported the issue.
damien2702 said:
Unfortunately, I'm starting to think it is, considering what I found on the internet. I'm kinda deceived by Xiaomi, which I thought was great value for the price. There is not even an official statement about this, even though many users reported the issue.
Click to expand...
Click to collapse
Sadly thats the problem with Chinese phones,some of us that will face this problem's have no protection,we cant return the phone and get a new one,its better for us just to buy a new screen off aliexpress for 20euros than to wait 2 month's to ship it back and wait for it to be fixed and then returned and you pay the shipping costs and also the repair costs,but thats the risk we accept when we want the best bang for the buck.
Also poor quality control on the products to cut the costs is the real reason behind the problems we face
Had the same problem, it got fixed in the latest developer 7.6.29.
mundano said:
Had the same problem, it got fixed in the latest developer 7.6.29.
Click to expand...
Click to collapse
Hi, I indeed tried this solution, even thought it worked for a few hours.. But it came back soon enough
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Griha3212 said:
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Click to expand...
Click to collapse
please can you make video this help a lot
Hey guys, thanks to Griha3212 I found out on my Mi 5 it's the screw in the top middle part of the phone, the one with warranty sticker. Just loosen it a bit. It works fine after I loosen it. Tried tightening it too and the problem came back.
mi5 unresponsive
mundano said:
Had the same problem, it got fixed in the latest developer 7.6.29.
Click to expand...
Click to collapse
still fixed at these days? now after screen replacement and an update, the touch becomes unresponsive
Griha3212 said:
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Click to expand...
Click to collapse
This is still working. Thx for help. Saved my phone after screen replacement.
Which Screws`?
I have the same Problem with my Mi5. Is there anyone who has a Picture for me, which Srews i have to loosen? Thanks
hotdogg1979 said:
I have the same Problem with my Mi5. Is there anyone who has a Picture for me, which Srews i have to loosen? Thanks
Click to expand...
Click to collapse
Hi Guys, I hope my solution helps to solve your problem. It is definitely about the screws. For me, I have found out that one screw is very slightly thinner than the others (of course the one with warranty stick should go to the centre and there is one silver metal going top left). This thinner screw should go up middle. That worked for me.
Does the screws trick work on your phone? Plz tell me.
Griha3212 said:
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Click to expand...
Click to collapse
Thank you, you saved my Gemini :good:
Doesn't work for me. I tried with all screws.
Sent from my MI 5 using Tapatalk
screw solution works !!
I tried this solution with Redmi 2 and its the exact same screw which is the problem ie the screw right in the middle of the phone.
i loosed it slightly and now no more screen freezes. :good:
Hi I'm attaching an image with the screws numbered.
Griha3212 said:
Guys,hello! I have a good news for you,i hope so. Ok. 1st of all I defeated the error with the screen off.
Here is my story.
I just wanted a black mi5. After some time found on ebay. I bought it, he arrived, after two days the touchscreen stopped working absolutely randomly.
The seller said that everything will do. I sent, he did nothing! Sent me. It all happened twice. Exactly twice I sent my mi5 from Russia to China! I read all the messages and tried everything. Nothing helped.
That's what I tried and that does not exactly work.
1. It does not depend on the version of miui or linegeOS.
2.This does not depend on time.
3.This does not depend on temperature.
I experimented, heated it, lay in the refrigerator. I clicked on the screen / body.
In the end, I understood the reason-static electricity.
HOW TO FIX IT!
1.Remove the back cover.
2. Twist the screws in the center and bottom, possibly a pair on the right side.
3. Try so far without the lid closed.
4.If the screen stops responding, try unscrewing the other screws.
5.Repeat, until you find the right combination and the touchscreen will work constantly.
Guys, I really helped it.
I hope this also solves your problem with the screen. Good luck!
I cant add a picture as a new user(((
Red squares-deleted screws on my configurations.
Green rounds-screws which i left without any changes.You can write me:[email protected]
or call me Skype: Griha3212
if you dont understand something in my instruction.
Click to expand...
Click to collapse
It would be nice if you post which numbers have you tried.
Richardyii said:
Hey guys, thanks to Griha3212 I found out on my Mi 5 it's the screw in the top middle part of the phone, the one with warranty sticker. Just loosen it a bit. It works fine after I loosen it. Tried tightening it too and the problem came back.
Click to expand...
Click to collapse
Did you mean that, when loosen it, the problem dissapears immediately without rebooting? Because I've tried it and it does not work immediately.
Mamihla said:
Hi Guys, I hope my solution helps to solve your problem. It is definitely about the screws. For me, I have found out that one screw is very slightly thinner than the others (of course the one with warranty stick should go to the centre and there is one silver metal going top left). This thinner screw should go up middle. That worked for me.
Click to expand...
Click to collapse
I think your explaination is a little bit confusing. Did you mean that the thinner screw (the number 1 on the image attached) has to be swapped with the number 2? Or with the one with the warranty (number 5)?
Please if any other one found a combination that works, post it using the numbers of my attachment as reference. I have been tried several combinations amd no one seem to work.
Hello Guys !
I have a big massive Problem with my Note 8 SM-N950F.
I was watching Youtube and my Phone has worked fine no Problem no Green Screen till suddendly my Screen went full Green Flickering mode and I dont know what the Reason is. I restarted the Phone and it worked again no problem for 30min then it went back to Green flickering screen.
I have try : Restore the Phone as New completly Wipe out / Result = Negative
Installed a Custom Rom / Result = Negative
I did not dropped the Phone nor does it has a Water Damage.
The Green Flickering screen only comes when Im in the System but while I am on TWRP it never shows up so I think it has something to do with the system and not Hardware.
Problem still there still need a Help
LuxyFlex said:
Problem still there still need a Help
Click to expand...
Click to collapse
A full wipe and flashing the latest official firmware usually solves non-hardware issues. If you tried that and the issue is still there, then it sounds like a hardware issue that would need repair (hopefully within warranty).
sefrcoko said:
A full wipe and flashing the latest official firmware usually solves non-hardware issues. If you tried that and the issue is still there, then it sounds like a hardware issue that would need repair (hopefully within warranty).
Click to expand...
Click to collapse
But how can it be a Hardware problem, i didnt drop nor does it have any Damage and if im on TMRW or Download mode i dont see the green flickering only after I boot
LuxyFlex said:
But how can it be a Hardware problem, i didnt drop nor does it have any Damage and if im on TMRW or Download mode i dont see the green flickering only after I boot
Click to expand...
Click to collapse
Motherboards can be faulty, etc. It doesn't have to be caused by the user. If you flash stock with full wipe and the issue persists then the only remaining variable is hardware. Either that or maybe you didn't do the full wipe when flashing latest firmware. Not sure what else to suggest beyond those two possibilities. Hope you get it working.
I had this also on my N950F. It happened very suddenly while I was using it:-
* Greenish tint
* Reduced brightness capability
* Flickering
* ~half-inch border of more intense tinting on all four sides
Cut a long story short - couldn't fix it with a complete factory reset.
Today, the problem has suddenly disappeared and the screen is perfect after four days with this issue. Just out of the blue - screen back to normal.
I'm guessing it was either a dodgy board connection which righted itself, or a temporary light sensor issue.
it is a hardware fault relating to the lcd. this is usually seen when the phone has been dropped. and is a broken lcd. i know its stated it wasnt dropped but that is the issue
galaxys2Tav said:
it is a hardware fault relating to the lcd. this is usually seen when the phone has been dropped. and is a broken lcd. i know its stated it wasnt dropped but that is the issue
Click to expand...
Click to collapse
Utter nonsense. It hasn't been dropped and it doesn't have an LCD screen. Know-it-alls spoil it for others by making unfounded comments.
aZooZa said:
Utter nonsense. It hasn't been dropped and it doesn't have an LCD screen. Know-it-alls spoil it for others by making unfounded comments.
Click to expand...
Click to collapse
unfortunatly i missed judged and put lcd as infact its an O-LED screen! my bad, and as i fix samsung screens on a daily basis weather they would be LCD or O-LED screens this is infact the fault. never sujested you had dropped it im saying that this is the probblem with it weather it has been dropped or become faulty. know-it-all spoil sports are here to help on xda and unfortunatly its not the right answer you are looking for but i posted the right answer to the question that was asked in the Q&A section. just thought i would help out but, but hey
Thread cleaned
Please keep it on topic
FSadino
galaxys2Tav said:
unfortunatly i missed judged and put lcd as infact its an O-LED screen! my bad, and as i fix samsung screens on a daily basis weather they would be LCD or O-LED screens this is infact the fault. never sujested you had dropped it im saying that this is the probblem with it weather it has been dropped or become faulty. know-it-all spoil sports are here to help on xda and unfortunatly its not the right answer you are looking for but i posted the right answer to the question that was asked in the Q&A section. just thought i would help out but, but hey
Click to expand...
Click to collapse
Yes, that's it, if not droped, then a faulty screen, just like that, many people wish that all problems can be fixed by some trick, clever app or hidden setting, but, in true, a very little number of troubles are fixed this way, so my advice would be to take the device to an authorized samsung service center
aZooZa said:
Utter nonsense. It hasn't been dropped and it doesn't have an LCD screen. Know-it-alls spoil it for others by making unfounded comments.
Click to expand...
Click to collapse
Be nice to people trying to help you.
There is two causes to this. Software or hardware. Next time it happens try screen capture. If appears on screen shot it's software buggy. Although highly unlikely but if it does usually a reboot or factory reset solves it.
Other more likely scenario is hardware. If you used a crt tv you'll know as its the same symtom of failing picture tube.
And it's definitely not connector issue.
Sent from my SM-N950F using Tapatalk