Database Develop

HELP!!! MiniCM7 or CM7.2

hey
one of my friends asked to install a custom rom on his x8. i found minicm7 or cm7 (im currently running cm7.2 on my sgm)
1. which is the best rom of the two.?
2. it is safe to open the bootloader if the phone has got simlock.? (I DONT WANT NETWORK UNLOCK!!!)
3. how to install cwm.?
4. how to revert to stock.?
5. how to check this 11w38 or wtf version number. (the build no and baseband is ok for minicm7D)
Sent from my GT-S5570 using xda premium

There's a FAQ for every question you have. Consult that thread and don't open new ones that have already been answered. And always search!
Sent from my X8 using XDA

geri268 said:
hey
one of my friends asked to install a custom rom on his x8. i found minicm7 or cm7 (im currently running cm7.2 on my sgm)
1. which is the best rom of the two.?
2. it is safe to open the bootloader if the phone has got simlock.? (I DONT WANT NETWORK UNLOCK!!!)
3. how to install cwm.?
4. how to revert to stock.?
5. how to check this 11w38 or wtf version number. (the build no and baseband is ok for minicm7D)
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
As our dear RC , Chris , mentioned. Use Search next time.
Anyways , to answer your questions :
1. I found CM7 ROMS like GingerDx/PrimeHD the best of all I tried. But I recommend you to try both ROMS as user experience is different for everyone.
2. It is safe to unlock bootloader if your phone code is before 11W29. I am almost sure simlock status does NOT matter in unlocking bootloader.
3. Root the X8. Flash CWM. Flash ROM
4. To flash back stock , use PCC/SEUS. You'll get back to stock eclair.
5. The code is under the battery (but not on the battery)

thx. these are the steps in the good no.?
1. root
2. unlock bootloader
3. flash kernel
4. flash cwm (how to flash it?)
5. install zip n wipe data cache
.???
Sent from my GT-S5570 using xda premium

the cwm comes with the custom kernel

geri268 said:
thx. these are the steps in the good no.?
1. root
2. unlock bootloader
3. flash kernel
4. flash cwm (how to flash it?)
5. install zip n wipe data cache
.???
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
4. flash cwm (how to flash it?)
Click to expand...
Click to collapse
enter to CMW
how?
turn off your phone..turn on again
when show a bootanimation, press back button until show CMW mode

thanx everybody i successfully installed gingerdx on my friends x8
Sent from my GT-S5570 using xda premium

Please hit the thanks button bro....don't just say thanks in comment but hit the button;-)
Sent from my chooper using xda premium

RudzLong said:
Please hit the thanks button bro....don't just say thanks in comment but hit the button;-)
Sent from my chooper using xda premium
Click to expand...
Click to collapse
Well said, this is the purpose of the button, to hit when sb help you..and they help you!!!!!
Sent from my X8 using xda premium

stamatis16 said:
Well said, this is the purpose of the button, to hit when sb help you..and they help you!!!!!
Sent from my X8 using xda premium
Click to expand...
Click to collapse
no no no
the words were too harsh if you said that

RudzLong said:
no no no
the words were too harsh if you said that
Click to expand...
Click to collapse
Oops sorry if I hurt your feelings lol
Sent from my X8 using xda premium

stamatis16 said:
Oops sorry if I hurt your feelings lol
Sent from my X8 using xda premium
Click to expand...
Click to collapse
stttttttt.........
lol

I dont know much but the network bootloader is different from the system? bootloader... is it?

t81 said:
I dont know much but the network bootloader is different from the system? bootloader... is it?
Click to expand...
Click to collapse
????
Sent from my chooper using xda premium

Cant Flash JOYOS ROM

While flashing it has p970 product error... helppp
Sent from my LG-P970 using xda premium

Take out the battery, press volume + and plug it to the pc > smartflash while in S/W mode

ErnuB said:
Take out the battery, press volume + and plug it to the pc > smartflash while in S/W mode
Click to expand...
Click to collapse
I did not brick it. I have the knowledge to rewind. So my question is, whats the problem with the zip?? Other roms are free of flashing probs...
Tried re downloading.
Sent from my LG-P970 using xda premium

Do you have stock or touch cwm?

RomWiz said:
Do you have stock or touch cwm?
Click to expand...
Click to collapse
My info:
SUPRESSED V7.5
TANTRUMS TOUCH CWM 5.0.8.6
Sent from my LG-P970 using xda premium

SoulExertz said:
My info:
SUPRESSED V7.5
TANTRUMS TOUCH CWM 5.0.8.6
Sent from my LG-P970 using xda premium
Click to expand...
Click to collapse
Install CWM regular recovery image using CWM Manager (easiest) or by injecting the appropriate recovery image from here.
Tantrums and CWM touch recovery images have a few flashing issues, which are only minor and isolated problems, but none the less the have them (i don't know why).

CWM Touch 6.0.1.5 flashable zip

Hi,
I made a flashable zip that flashes CWM Touch 6.0.1.5 based on civato's method. It is the easiest method to get CWM Touch for free. I have tested it and it fully works. Only for ROMs that use the gingerbread partion layout I think, I have not tested it on the new stock ICS layout.
Simple installation ,
-Put the recovery update zip on your phone (externalSD if you got it) , go into CWM , select it and flash.
-FIRST REBOOT YOUR PHONE (not into recovery) !!!!!!!!!!!!!!!!!!!!!!!!
-After full reboot now you can go to recovery and enjoy !!!!!!!!!
Click to expand...
Click to collapse

Reserved

For the stock or the CM?

orbital_71 said:
For the stock or the CM?
Click to expand...
Click to collapse
It's for the gingerbread partion layout. So it will work both on stock and CM but only with the Gingerbread partion layout.
Sent from my LG-P990 using xda app-developers app

Lord Inglip said:
It's for the gingerbread partion layout. So it will work both on stock and CM but only with the Gingerbread partion layout.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
I think u need to add in ur op for it as we know there are new one for stock..:beer:

orbital_71 said:
I think u need to add in ur op for it as we know there are new one for stock..:beer:
Click to expand...
Click to collapse
Done :thumbup:
Sent from my LG-P990 using xda app-developers app

[Q] From ICS Stock to CM mod

Guys i rooted my ICS stock room and over Cloclwok mod wanted to put 10.1 CM and i did it. The problem is when i do all u need to do to install Cm after that when phone boot i still have 4.0.4 stock rom. Someone know what to do?

Blinker7 said:
Guys i rooted my ICS stock room and over Cloclwok mod wanted to put 10.1 CM and i did it. The problem is when i do all u need to do to install Cm after that when phone boot i still have 4.0.4 stock rom. Someone know what to do?
Click to expand...
Click to collapse
Try CM10 on ICS bootloader or any
Other ICS roms..
Sent from my LG-P990 using xda app-developers app

Jishnu Sur said:
Try CM10 on ICS bootloader or any
Other ICS roms..
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
How to do that?

Are you using the recovery from Pengus
Read this thread the special recovery is required http://forum.xda-developers.com/showthread.php?t=2058231
Then this is my fav at the mo for 4.2.1 http://forum.xda-developers.com/showthread.php?t=2062573
Still quite buggy tho cm10 by pengus is currently perfect.

Blinker7 said:
How to do that?
Click to expand...
Click to collapse
Flash the special recovery. Then reboot recovery, flash the ROM.
Sent from my LG-P990 using xda app-developers app

Jishnu Sur said:
Flash the special recovery. Then reboot recovery, flash the ROM.
Sent from my LG-P990 using xda app-developers app
Click to expand...
Click to collapse
Thanks, it worked

[Q] Help a newbie out

Evenin' xda!
I'm the proud owner of a non-rooted SGSA and I am having a couple issues I couldn't get my head around so I was hoping that you guys could give me a hand.
My phone's csc was MTL (not my country's csc) and since I couldn't find any JB version made especially for this csc I flashed one released for my country (COA). It ran really smooth for a couple of weeks but every once in a while my systemUI keeps freezing ,or I get some really annoying lag spikes while performing easy tasks like messaging through the stock app or browsing my contact list.
Now, should I flash some other version of JB , a more stable one, if there is such thing, or should I go ahead and root my device?
Would rooting help me out, and by that I'm asking you to tell me whether there are any stable custom ROMs and/or kernels that I could use? (this is where my inner noob kicks in, I'm pretty helpless )
Thanks a bunch !
P.S. I did try to search for answers but I couldn't find anything useful.

Root I would say is a much better answer to your problem.
Root your phone, flash cocore kernel and debloat your system ie remove unwanted files. This will definetely boost up your phones speed and your phone won't freeze.
If you want to.. you can also try CynogenMod 10.1
#IamNotResponsibleForAnyDamageToYourPhone

szzlgupta said:
Root I would say is a much better answer to your problem.
Root your phone, flash cocore kernel and debloat your system ie remove unwanted files. This will definetely boost up your phones speed and your phone won't freeze.
If you want to.. you can also try CynogenMod 10.1
#IamNotResponsibleForAnyDamageToYourPhone
Click to expand...
Click to collapse
This ^
Sent from my GT-I9070 using xda app-developers app

It might also imply a bad flash

Pls Gimme link to cm 10.1 download nd installation steps
Sent from my GT-I9070 using xda app-developers app

mannulko said:
Pls Gimme link to cm 10.1 download nd installation steps
Click to expand...
Click to collapse
CM10.1 thread - http://forum.xda-developers.com/showthread.php?t=2108362
Installation steps:
1.Download the ROM from the link below
2.Download gapps on http://goo.im/gapps
3.Put the zip files on your SDCard
4.Reboot on Recovery
5.Wipe Data / Factory Reset
6.Select "Install the Zip from External Storage"
7.Choose CM zip file
8.Choose GApps zip file
9.Reboot to system
Click to expand...
Click to collapse
Download latest nightly 09.09.2013: http://goo.im/devs/diegoch/janice/cm-10.1/nightly/cm-10.1-20130909-NIGHTLY-janice.zip
Download gapps link: http://goo.im/gapps/gapps-jb-20130812-signed.zip

R_a_z_v_a_n said:
CM10.1 thread - http://forum.xda-developers.com/showthread.php?t=2108362
Installation steps:
Download latest nightly 09.09.2013: http://goo.im/devs/diegoch/janice/cm-10.1/nightly/cm-10.1-20130909-NIGHTLY-janice.zip
Download gapps link: http://goo.im/gapps/gapps-jb-20130812-signed.zip
Click to expand...
Click to collapse
Do we need to install custom recovery ?
Sent from my GT-I9070 using xda app-developers app

Yep.
Flash kernel with custom recovery, like cocore or thunderzap and after that go to CM10.1.
Here the guide, start from B) point : http://forum.xda-developers.com/showthread.php?t=2198341

R_a_z_v_a_n said:
Yep.
Flash kernel with custom recovery, like cocore or thunderzap and after that go to CM10.1.
Here the guide, start from B) point : http://forum.xda-developers.com/showthread.php?t=2198341
Click to expand...
Click to collapse
Pls give me link to download temp cwm recovery. Link on above page is not working
Sent from my GT-I9070 using xda app-developers app

mannulko said:
Pls give me link to download temp cwm recovery.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1987313

I have installed cwm nd cocore pls see the screen pic if it is ok
Sent from my GT-I9070 using xda app-developers app

mannulko said:
I have installed cwm nd cocore pls see the screen pic if it is ok
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
Yes, CoCore is installed. If you want to install some ROM, charge battery. Now as I see you have 20-30%.
Послато са GT-I9070 користећи Тапаталк 4

Pls suggest stable vanilla rom based on 4.2 android.nd should i factory reset or any thing after flashing new kernel?
Sent from my GT-I9070 using xda app-developers app

Can we overclock s advance processor?
Sent from my GT-I9070 using xda app-developers app

Nope.

Pls recommend any power saving kernel.cocore is eating battery like hell
Sent from my GT-I9070 using xda app-developers app

Try Harsh jelly v2.1 with cocore 7.6 it works verry well.
Sent from my GT-I9070 using xda app-developers app

Phoneboot said:
Try Harsh jelly v2.1 with cocore 7.6 it works verry well.
Sent from my GT-I9070 using xda app-developers app
Click to expand...
Click to collapse
I tried this combination a few days ago and, lags was like hell!!
mannulko, I recommend cm10.1, cause aside from some annoying things such as low volume in call, it's very stable, but you could try some custom roms out there, you could try first version of harsh jelly with any of the cocore kernel, just try different versions and see which one suits you!!!

Shiningb said:
I tried this combination a few days ago and, lags was like hell!!
mannulko, I recommend cm10.1, cause aside from some annoying things such as low volume in call, it's very stable,
Click to expand...
Click to collapse
I installed CM couple of months ago and I had normal volume all the time.
Sent from my GT-I9070 using xda premium

Shiningb said:
I tried this combination a few days ago and, lags was like hell!!
mannulko, I recommend cm10.1, cause aside from some annoying things such as low volume in call, it's very stable, but you could try some custom roms out there, you could try first version of harsh jelly with any of the cocore kernel, just try different versions and see which one suits you!!!
Click to expand...
Click to collapse
Strange i didnt had that with Harsh,
Maybe you flashed it not the proper way.
Sent from my GT-I9070 using xda app-developers app