Database Develop

[HELP] galaxy ace, huge problem after cwm

I rooted my galaxy ace and was fine. I tried to install cwm but because i had to previous version i could not flash to zip so i tried to copy the files by my own. After the restart i could not boot to cwm and booted to my default android but with many bugs, i have no access to my settings or contacts. Any way to undo the damage? really need help... or giving me the default files of the system?

fotis12 said:
I rooted my galaxy ace and was fine. I tried to install cwm but because i had to previous version i could not flash to zip so i tried to copy the files by my own. After the restart i could not boot to cwm and booted to my default android but with many bugs, i have no access to my settings or contacts. Any way to undo the damage? really need help... or giving me the default files of the system?
Click to expand...
Click to collapse
Re-flash rom! with odin
Sent from my GT-S5830 using xda premium

any steps? i dont know how to work odin

fotis12 said:
any steps? i dont know how to work odin
Click to expand...
Click to collapse
Give me a bit i'll make u a tuturial
Sent from my GT-S5830 using xda premium
---------- Post added at 09:24 PM ---------- Previous post was at 08:59 PM ----------
Chech This
http://forum.xda-developers.com/showpost.php?p=23067283&postcount=5

check this post
http://forum.xda-developers.com/showpost.php?p=28137875&postcount=2

Flashing official cm10.1 on new bl

Hi everyone,i am now using v30b and I want to flash cm 10.1.bur how can I flash it on the new bl?? What should I do??
Sent from my LG-P990 using xda premium

get AIO TOOLKIT (all in one toolkit)
http://forum.xda-developers.com/showthread.php?t=2020737
once u have it. run the cmd. select option 4"change partition sizes" select new ICS layout. then when it returns. (unplug re enter apx mode) run again and select option 8 flash new bootloader + recovery.
once done. boot into recovery and flash desired rom.
---------- Post added at 09:41 PM ---------- Previous post was at 09:40 PM ----------
changing BASEBAND takes place before all of this. but you probably already know

Any rom could be flashed then？
Sent from my LG-P990 using xda premium

[Q] Bricked friend's Droid 3 (XT860)

Hey fellas, i'm desperate cos i've bricked my friend's droid 3 (XT860) while trying to flash cyanogen mod 10.1 to it.
I do not remember which version it was but i'm almost sure it was a 5.2.420 - Android 2.3.5.
I rooted the phone and flashed clockworkmod recovery using Rom Manager, wiped both data and cache, installed cyanogenmod 10.1 and gapps, and wiped data and cache again. After rebooting, the phone was stucked on the 'Dual Core' logo. I can go into recovery but i no longer have clockworkmod installed nor can i try to reinstall the ROM again.
After trying some stock flashing and getting a boot failure error message, im now with this AP Fastboot Flash Mode (S) (Boot Failure) Screen.
Could anyone please help me? It's my friend phone!
I'm sorry about my english.
Thank you for your time!

You can restore/unbrick it to the stock ROM, which will allow you to start over from a clean slate. I suggest using Safestrap instead of CWM/Rom Manager.
psouza4[dot]com/droid3/unbrick[dot]htm
EDIT: Refer to post #4 below.

StrelokPDA said:
You can restore/unbrick it to the stock ROM, which will allow you to start over from a clean slate. I suggest using Safestrap instead of CWM/Rom Manager.
psouza4[dot]com/droid3/unbrick[dot]htm
Click to expand...
Click to collapse
I wouldn't use that on a XT860
Sent from my XT862 using Tapatalk

sd_shadow said:
I wouldn't use that on a XT860
Sent from my XT862 using Tapatalk
Click to expand...
Click to collapse
Unhelpful response is unhelpful. Though you have some good info in your signature:
Looks like you want to flash to the first ROM here: http://sbf.droid-developers.org/phone.php?device=21
Flashing instruction here: https://docs.google.com/document/d/...10GSijVrg/edit?pli=1#bookmark=id.rvj235ud4nkd

StrelokPDA said:
Do you have a better idea? Is the XT862 ROM going to brick his already bricked phone? Or give him a chance to boot it, and start with a somewhat working system (even if the radio etc. might not work correctly)... I don't claim to be a smart phone guru, but your response isn't very helpful.
Click to expand...
Click to collapse
download Motorola Milestone 3 (XT860) firmware (.XML)
from http://sbf.droid-developers.org/phone.php?device=21
flash with rsd lite following Flash xml recovery files (Stock Rom) with RSD Lite
---------- Post added at 09:24 PM ---------- Previous post was at 09:17 PM ----------
or download Motorola Milestone 3 (XT860) firmware (.XML)
from http://sbf.droid-developers.org/phone.php?device=21
flash with moto-fastboot.exe
---------- Post added at 09:31 PM ---------- Previous post was at 09:24 PM ----------
more in my List
sd_shadow's [Collection] of Links For: Milestone 3 (XT860, XT861, XT860, ME863)

How to easly install a custom rom on my Note 3

I need help on how to install a custom rom, i have been at it, and i cant seem to get this done at all.
http://forum.xda-developers.com/showthread.php?t=2595085 (Dynamic Rom)
There is the link of the rom i want to install on my stock Galaxy Note 3 4.3.
I Have Rom Manager on my phone and i have safestrap when i put the phone in recovery mode, i dont get any of these options like to install rom etc..

Dasin said:
I need help on how to install a custom rom, i have been at it, and i cant seem to get this done at all.
http://forum.xda-developers.com/showthread.php?t=2595085 (Dynamic Rom)
There is the link of the rom i want to install on my stock Galaxy Note 3 4.3.
I Have Rom Manager on my phone and i have safestrap when i put the phone in recovery mode, i dont get any of these options like to install rom etc..
Click to expand...
Click to collapse
did you install the safestrap recovery from inside the app

jerrycoffman45 said:
did you install the safestrap recovery from inside the app
Click to expand...
Click to collapse
No i just downloaded safestrap from a online source and then transferred it to my Phone and then i just installed it from there

Dasin said:
No i just downloaded safestrap from a online source and then transferred it to my Phone and then i just installed it from there
Click to expand...
Click to collapse
click on the app on your phone then click install recovery also make sure you have the right version of safestrap for 4.3 it is 3.71

jerrycoffman45 said:
click on the app on your phone then click install recovery also make sure you have the right version of safestrap for 4.3 it is 3.71
Click to expand...
Click to collapse
im on version 3.2, do i need to downgrade? if not
when i go to boot into recovery mode it just goes into a boot loop, n then boot into 4.3 and im back at square one

Dasin said:
im on version 3.2, do i need to downgrade?
Click to expand...
Click to collapse
yes 3.72 is for kitkat

jerrycoffman45 said:
yes 3.72 is for kitkat
Click to expand...
Click to collapse
When I try and boot into clockwork recovery mod, this is the image I get on the screen once the phone reboots into recovery mode

That is the stock recovery to get to safestrap recovery just hit the reboot into recovery button in the app
Sent from my SAMSUNG-SM-N900A using Tapatalk
---------- Post added at 09:35 PM ---------- Previous post was at 09:34 PM ----------
And safestrap uses a modified twrp recovery
Sent from my SAMSUNG-SM-N900A using Tapatalk

jerrycoffman45 said:
That is the stock recovery to get to safestrap recovery just hit the reboot into recovery button in the app
Sent from my SAMSUNG-SM-N900A using Tapatalk
---------- Post added at 09:35 PM ---------- Previous post was at 09:34 PM ----------
And safestrap uses a modified twrp recovery
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
I just did that and i get the same options, shown in the picture above, it wont let me get into that mode.

I don't know what to tell you maybe uninstall the recovery from within safestrap then uninstall safestrap reboot and try again I would also try re downloading the app maybe a bad download
Sent from my SAMSUNG-SM-N900A using Tapatalk
---------- Post added at 09:56 PM ---------- Previous post was at 09:55 PM ----------
Also you are already rooted right
Sent from my SAMSUNG-SM-N900A using Tapatalk

Dasin said:
When I try and boot into clockwork recovery mod, this is the image I get on the screen once the phone reboots into recovery mode
Click to expand...
Click to collapse
I have seen you mention ROM Manager and Clockwork recovery. Neither of these are compatible with the AT&T Note 3. PM & I will help out.

jerrycoffman45 said:
I don't know what to tell you maybe uninstall the recovery from within safestrap then uninstall safestrap reboot and try again I would also try re downloading the app maybe a bad download
Sent from my SAMSUNG-SM-N900A using Tapatalk
---------- Post added at 09:56 PM ---------- Previous post was at 09:55 PM ----------
Also you are already rooted right
Sent from my SAMSUNG-SM-N900A using Tapatalk
Click to expand...
Click to collapse
When i boot up the phone, it says the process system has not running wait or ok, when i push ok or wait. after about 40 seconds the phone just freezes up.

CWM/TWRP Problem

Hello all. I'm having a strange problem. I have a T-Mobile D959. I've flashed back to stock JB and rooted and installed CWM/TWRP about ten times before and I never had this problem. Here's the deal:
I flashed back to Jellybean with the kdz. (I was on Dfuse's Stock Rooted KK) After I flashed back and did a factory reset I then used ioroot25 to root. That went as expected. I then downloaded the Freedom Flex app to install TWRP/CWM. When I flash either Recovery it looks like it's working. Superuser comes up and I hit allow. When I choose reboot into recovery or manually try I get to the fastboot menu and I basically have no recovery. I've tried flashing the Jellybean kdz again as well as the KitKat kdz then went back and flashed the Jellybean kdz again. For some reason neither recovery will install. I am definitely rooted as root checker and Root Explorer confirm that. When I flash either kdz to go back to stock it does indeed install the stock recovery again. Does anyone have any idea why this could be happening? Thanks for your help.

Not sure but does the kdz. Reflash the aboot
Sent from my LG-D950 using XDA Premium 4 mobile app
---------- Post added at 02:59 AM ---------- Previous post was at 02:58 AM ----------
Maybe try flashing just the jb aboot an maybe even the laf
Sent from my LG-D950 using XDA Premium 4 mobile app

I'm pretty sure it does as I lost recovery completely when I first got the phone when I tried flashing TWRP and flashing the kdz fixed that.
techdeisel said:
Not sure but does the kdz. Reflash the aboot
Sent from my LG-D950 using XDA Premium 4 mobile app
---------- Post added at 02:59 AM ---------- Previous post was at 02:58 AM ----------
Maybe try flashing just the jb aboot an maybe even the laf
Sent from my LG-D950 using XDA Premium 4 mobile app
Click to expand...
Click to collapse