Ok my son Unlocked the Boot and rooted then installed a couple of apps, and the phone stays on HTC logo, in recovery you can't mount SD card, i tried XLMultiTool.v2.1 and still no SD Card , also tried Clockwork and again no SD Card visable, can anyone help me recover the phone please.
Ok i have puched the SDcard Fix found in this forum, and i installed recovery image from TWRP and i can see the zip on the SD card, but when i try to install it it says Error flashing zip unable to mount SD
Ok i now have SD back what zip do i flash with the phone is HBoot 1.28
Related
I read ur forum on partitioning SD card for app2sd n I seem to be having a similar problem. I recently flashed amon ra 1.6.2 thru clockwork mod on my HTC hero...I was trying to install a custom Rom cm 6.2 stable. I booted into recovery n did a nand backup n it worked fine. But when I chose the option to install zip from SD card it said no zip found. That was after I did a complete wipe of the system data. And as I tried to restore the nand backup I get n error message saying the directory cannot be found. So now I'm completely stuck. I was wondering wat I can do at this point. I was reading about partitioning the SD card n I was thinking I should try ur suggestion...I already tried rebooting several times n still the same problem. Any feedback will be greatly appreciated.
Re-partition SD card = wipe all data off card. Sounds like you wiped your card of the back-up image as well as the .zip file for the ROM. Is that what you did?
Do you have an external card reader? Is there a .zip file on the card?
I have CWM 3.0.0.6 on an uSD card, and the Nook boots fine into recovery, but when I swap out the card to remove dual boot, I get an error saying E: can't mount sdcard. Any ideas how to fix?
-Kevin
I've had this issue myself a few times.
Typically you'll want to swap out the SD card the second CWM boots up, and if that doesn't work you may want to try flashing CWM internally instead, or simply add the files to the CWM sd card via your phone or an SD reader.
Awesome - thanks Link. Pulling the card immediately after CWM launched enabled the Nook to recognize the card I quickly swapped in.
Hi,
I am having an issue that I'd hope you would be able to help me with. I flashed CyanogenMod10, and everything was doing fine, smooth performance, reboots with no problems, but then suddenly one day it went bricked. I restored through the SmartFlashTool Method, and got back to the stock Rom with everything working except for the SD card.
I have tried out various stock ROMs and none seemed to recognize the SD card, outputting a message of "SD card removed. Please insert a new one."; getting on to ADB when trying to mount the SDcard I get this message "mounting /dev/block/mmcblk1p1 on /sdcard failed: No such file or directory", and while trying to mount the SD card in CWM Recovery, it tells me "E: Can't mount sdcard", and when I try to mount USB storage through CWM, I get "E:Unable to write to ums lunfile(no such file or directory)", and when trying to mount /sdcard on CWM I get a "Error mounting /sdcard" message... I hope people at XDA would be able to help me since I have been lurking through the forums and internet without any good answer. :highfive:
I was able to mount the SD card through ClockWorkMod Recovery v5.0.2.6, but again, barely at random times when it works, and after installing a ROM those times, the phone usually works for one hour or two and then gets bricked again. I can not have access to another CWM version since I need an SD card to flash it. To install CWM I am using a patched .bin and .fls files in the SmartFlashTool method of unbricking. When the SD card gets recognized, I can even reboot the phone and still get the SD card to be recognized. The SD card problems don't happen until the random bricks after flashing a ROM. :fingers-crossed:
I have also tried using several functioning SD cards of different capacities formatted in NTFS, FAT32 and exFAT with no luck. I am also not willing to go back to stock since it is buggy and lags a lot compared to CM7, CM10 and every other custom rom I have tried. :crying:
Thank you for any help you could provide me, or if you have any answer for this problem,
Pablo Lujambio
Firstly when you get access to sd card with cwm or anything get your files backup to your pc.Than try format your sdcard in settings menu on your phone.Did you tried format your sdcard in settings menu?
George Jetson said:
Firstly when you get access to sd card with cwm or anything get your files backup to your pc.Than try format your sdcard in settings menu on your phone.Did you tried format your sdcard in settings menu?
Click to expand...
Click to collapse
Yes I did try that last time but I only seem to get a "Can't mount sdcard" error. I haven't been able to get the phone to recognize any SD card on v10a, v20a, nor v20b stock roms.
i installed 10.1 and upgraded to 10.2 on my nook hd. I downloaded the cm 11 recovery and cm11 rom and gaps to my nook to upgrade to kitkat. After i downloaded the cm 11 to my nook, the updater took me to recovery. i installed the cm 11, but then had problems. I realized that I was using the cm 10 recovery , and should have installed the cm 11 recovery before I attempted to flash the new rom. I then wrote verygreen's sd card image for cm11 and it did boot into recovery. when i tried to install the rom, the device said it couldn't mount the sd card. i tried using the cm 10 recovery image and that didn't work either. same message, couldn't mount sd card. I then formatted cache, data, boot, did another wipe and same issue. currently, it takes a long time but the nook hd will boot into cm recovery, but same issue about not able to mount sd card. I checked similar threads for other devices, but I couldn't find any solutions. I called barnes and noble customer assistance and they were totallyuseless. My question is how do i get recovery to mount my sd card?
ditto
I had the same issue on my nook hd-
When I wrote the image to the sd card- I could boot in to CWM 6.0.4.6, from that sd card- but it could not mount the sd card, or find any files on it. so I couldn't flash the emmc version. When I pulled that sd card out, it reverted back to cwm 6.0.3.2 (which worked fine with cm10.1) but again, it still can't find the sd card.
/sdcard is the internal sd and while is mounted and navigatable, it's blank and there's nothing to install from it. (is there a way to copy to it from some other device?)
the other option is to install a zip from /storage/sdcard1 but that does nothing but pop up
E: Can't mount /storage/sdcard1
or
Error mounting /storage/sdcard1
Click to expand...
Click to collapse
I've been following and using the info in http://forum.xda-developers.com/showthread.php?t=2600572
I've used both a linux machine with dd and a windows machine with Win 32 disk imager for flashing images.
I've tried a variety of file systems (does anyone know what is the preferred file system for a grossly oversized micro sd card for CM11?).
I've tried to find a newer better version of CWM, and have found references to a 6.0.4.5b but haven't actually found the files yet.
have also tried sideloading with adb, but the device is never found. with either version of cwm
Would be ok moving back to cm10 as well, but as long as it can't find a SD card, I don't know how.
love this little device, would greatly appreciate any assistance.
-dingo
continued
after much banging of my head against the wall, I discovered that if i let it boot to the 6.0.3.2 on its own, it would let me mount the sd card that had the initial image written onto it.
So i loaded the new cwm zip and flashed it.
pulled the sd card out and had to let it reboot on its own 4 or 5 times before it popped up emmc CWM based recovery 6.0.4.6
..which then let me mount the sd card as /external_sd and I was able to flash the latest cm11 nightly (yes, I'm a glutton for punishment).
I've pulled the sd card out and rebooted...
AND IT'S BOOTING!!!!
...this is awesome.
Success
i changed sd cards and downloaded the recovery, rom, and gapps on the new card. Recovery was able to mount the new card and I got everything installed. Initially recovery aborted the rom installation, so I downloaded another cm10.1 and was able to flash it. So everything is good now.
Hi guys.
I want to flash the GT-N7000 of a friend of mine but here 's the thing.
I got all i need (raw kernel, philz cwm, rom, gapps etc)
when i boot into stock recovery i can select install from external storage. That gives me the message: failed to mount.
We looked into the phone and tadaa there was no SD Card.
My question is: is it possible to mount / install zip files from internal card? I can access the card trough USB cabel on my pc. I copied all the zip files there but i cant acces it trough the stock samsung recovery.
I hope u guys can help