Hello guys... i save my phone from a brick, and then i tried to switch from BR firmware to french firmware (in order to upgrade to JB) using RDS, but when the rebooting process started, the phone stayed in black, it didn not power up... so, it does not start up yet, when i push power button, the green led turns on for a few seconds and then the phone get off... i can not enter into recovery mode either... just the green led shows up and so...
i hope someone can help me fixing this huge issue.
best regards!!!
chocorock said:
Hello guys... i save my phone from a brick, and then i tried to switch from BR firmware to french firmware (in order to upgrade to JB) using RDS, but when the rebooting process started, the phone stayed in black, it didn not power up... so, it does not start up yet, when i push power button, the green led turns on for a few seconds and then the phone get off... i can not enter into recovery mode either... just the green led shows up and so...
i hope someone can help me fixing this huge issue.
best regards!!!
Click to expand...
Click to collapse
same trouble here :crying:
AW: Help!!!!!!!! My XT890 does not start up!!!
I guess both of you wasn't unlocked. If that's the case you guys killed the Bootloader. No way to save it now.
You can't flash anything if you're not able to boot into AP.
Sent from my XT890
HSD-Pilot said:
I guess both of you wasn't unlocked. If that's the case you guys killed the Bootloader. No way to save it now.
You can't flash anything if you're not able to boot into AP.
Sent from my XT890
Click to expand...
Click to collapse
Same Problem by me, but my Razr-i was unlocked
AW: Help!!!!!!!! My XT890 does not start up!!!
You had already updated to JB?
Even with an unlocked Bootloader you can't downgrade to ICS with RSD easily.
You have to remove the line gpt.bin & motoboot to flash an ICS Fastboot without an Brick. If you don't do that your Bootloader will be messed up and your Phone is dead.
Sent from my XT890
help please!!
i have de same problem
when i push power button, the green led turns on for a few seconds and then the phone get off... i can not enter into recovery mode either
anyone know how to fix it or fix it already
thanks!! :crying:
same problem here
im in mexico and i had the same problem, mine was because i went to jelly bean twice and on my third time i bricked it the only way to fix it was to take it to telcel(cell company)
warranty isue
bighleo114312 said:
im in mexico and i had the same problem, mine was because i went to jelly bean twice and on my third time i bricked it the only way to fix it was to take it to telcel(cell company)
Click to expand...
Click to collapse
You had the bootloader unlocked?
Telcel replace your xt890 or repair?
they make valid your waranty?
I have same problem
Sent from my GT-P1000 using xda app-developers app
You can try this: http://forum.xda-developers.com/showthread.php?t=2184877
marcosx64 said:
You had the bootloader unlocked?
Telcel replace your xt890 or repair?
they make valid your waranty?
Click to expand...
Click to collapse
Finaly i get my xt890 from service, they (Telcel) dont charge me nothing ´
:victory:
new imei number
bootloader locked again
marcosx64 said:
You had the bootloader unlocked?
Telcel replace your xt890 or repair?
they make valid your waranty?
Click to expand...
Click to collapse
Marcosx64 yeap i got a new razr from telcel they couldnt fix it. And my waranty was valid because they cant see the message of unlocked bootloader.(i guess thats the reason).
tried that but did not work, help please?
U1138 said:
You can try this: http://forum.xda-developers.com/showthread.php?t=2184877
Click to expand...
Click to collapse
My phone can enter fastboot
My phone can enter fastboot,“flash motoboot failed” with RSD, what can I do?I see motoboot the SBF inside. .Sorry, my English is poor
The beginning of time, the RSD can not read the phone, and then I try to use fastboot command Brush, brush into the boot file, brush system prompt bl file is too large, failed, and then I replace the computer, reinstall the system, RSD connected to the phone brushofficial SBF to the third step flash motoboot failed.I want to brush the official 4.1 GB was originally 4.0GB.How should I do it now?
What Firmware are you trying and what Firmware where you running, before you messed up?
I hope for you that you're not on your way to flash ICS over JB.
Gesendet von meinem XT890 mit Tapatalk 2
I notice that a lot of the bricks posted in these threads (and PMing me) have often less than 10 posts. This suggests people sign up here, download firmwares, flash without reading anything and BOOM. That's clearly a serious cause of a lot of this.
There appears to be different kinds of bootloader problems, I'm not totally sure if some of these are dead or repairable.
Related
So, I have an big problem which I have never seen before..
I try to flash my phone with this firmware "CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSVFFR_P045_A006_S1F F_fb.xml", but when my phone reboot for the first time, the screen stay black and nothing happened!
There's just the green light wich swich on and the vibration, but nothing on the screen!
And, if I plug into my laptop, I get the connection sound notification from my laptop but I can't do anything else.
If I try the command "Adb reboot-bootloader" it's write "device not found"
What can I do if I can't access anything?
Thanks in advance for you help.
What about your Battery? Try to connect your Wall Charger and let it charge for an while. If you're an lucky Guy it will boot after that.
HSD-Pilot said:
What about your Battery? Try to connect your Wall Charger and let it charge for an while. If you're an lucky Guy it will boot after that.
Click to expand...
Click to collapse
I don't know about my battery because there's nothing on my screen.
But I let my phone plug on my wall charger during the night and it's the same..
AW: Hard BRICK ?
And nothing is happen when you hold Power & Vol. down to get into AP. That's strange, I guess you messed up your Phone completely
Sent from my XT910
HSD-Pilot said:
And nothing is happen when you hold Power & Vol. down to get into AP. That's strange, I guess you messed up your Phone completely
Sent from my XT910
Click to expand...
Click to collapse
Yes nothing happenned..
PELLET Nolwenn said:
Yes nothing happenned..
Click to expand...
Click to collapse
Same issue here, doesn't seem battery issue as my battery was at about 90% when it happened. Now I can't do anything. I tried flashing the locked bootloader image with Handy-Faq.de_unlocked_and_locked_Logo_Flasher, after that it went into fastboot saying "bad flash", so I reflashed with CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSVFFR_P045_A006_S1FF_fb, now it won't turn on again, I just get the green light sometimes...
AW: Hard BRICK ?
Uhhh... sounds bad. But the Logo Flasher only contains the Logo for 39 & 40 ICS. Seems like it get an higher secure level on JB. To solve this issue you should have used the logo out of the OTA.
Sorry Guys, I don't know what's going on here but it looks like an downgrade from JB just bricks our RazR i. I only flashed the Homemade from Matt and I was able to downgrade without any issues.
Sent from my XT910
HSD-Pilot said:
Uhhh... sounds bad. But the Logo Flasher only contains the Logo for 39 & 40 ICS. Seems like it get an higher secure level on JB. To solve this issue you should have used the logo out of the OTA.
Sorry Guys, I don't know what's going on here but it looks like an downgrade from JB just bricks our RazR i. I only flashed the Homemade from Matt and I was able to downgrade without any issues.
Sent from my XT910
Click to expand...
Click to collapse
I think its a problem exclusive to CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSVFFR_P045_A006_S1F F_fb.xml, because you can downgrade to .32EU perfectly.
AW: Hard BRICK ?
I was wondering, when you extract the SFR39 Fastboot there's no OTA Folder in it.
Ok, so downgrade with an EU will work, good to know :thumbup:
Sent from my XT910
Bricked
I'm joining the hard-bricked club... Don't accept OTA's if you downgrade ):
tatazeuz said:
I'm joining the hard-bricked club... Don't accept OTA's if you downgrade ):
Click to expand...
Click to collapse
Bad news.. :/
I don't know if I unmount my phone and try to charg the battery manually or send my phone to the after sales mannager?
I bought my phone on c-discount with a garanty during 2 years for break, so i don't know if they could accept my phone if I told them something like "I upgrade my phone and now it's not working at all" ?
PELLET Nolwenn said:
Bad news.. :/
I don't know if I unmount my phone and try to charg the battery manually or send my phone to the after sales mannager?
I bought my phone on c-discount with a garanty during 2 years for break, so i don't know if they could accept my phone if I told them something like "I upgrade my phone and now it's not working at all" ?
Click to expand...
Click to collapse
These work...
http://shop.teamblackhat.info/Factory-Adapters-motadapt.htm
PELLET Nolwenn said:
Bad news.. :/
I don't know if I unmount my phone and try to charg the battery manually or send my phone to the after sales mannager?
I bought my phone on c-discount with a garanty during 2 years for break, so i don't know if they could accept my phone if I told them something like "I upgrade my phone and now it's not working at all" ?
Click to expand...
Click to collapse
I just sended my phone to the warranty saying that an update failed. The suckers just said "Your phone will be ready in 10 days". They even gave me a phone to call in the meantime (An horrible Galaxy Fit)
mattlgroff said:
These work...
http://shop.teamblackhat.info/Factory-Adapters-motadapt.htm
Click to expand...
Click to collapse
Are you sure? Tested?
If thats the case, i'll try to import one to Chile.
AW: Hard BRICK ?
tatazeuz said:
Are you sure? Tested?
If thats the case, i'll try to import one to Chile.
Click to expand...
Click to collapse
I have an Factory Adapter, but I won't test it
I guess no one is willing to try it after reading this Thread.
Sent from my XT890
HSD-Pilot said:
I have an Factory Adapter, but I won't test it
I guess no one is willing to try it after reading this Thread.
Sent from my XT890
Click to expand...
Click to collapse
Still good to have one at hand.
AW: Hard BRICK ?
That's true. I purchased it for my OG RazR and it saved my ass an couple of times now (Always charge before you flash )
Sent from my XT890
tatazeuz said:
I think its a problem exclusive to CFC_8.7.1I-110_IFW-39_S7_UCASMI01E1017.0R_USASMIICSVFFR_P045_A006_S1F F_fb.xml, because you can downgrade to .32EU perfectly.
Click to expand...
Click to collapse
excuse me, how can i downgrade from recovery menu?? mi phone is just rebooting. thank you.
tatazeuz said:
I just sended my phone to the warranty saying that an update failed. The suckers just said "Your phone will be ready in 10 days". They even gave me a phone to call in the meantime (An horrible Galaxy Fit)
Click to expand...
Click to collapse
Well,
I got luckier, got a replacement right away. However, I think it's time to wait for a stable solution, in the meantime I'll stick with the stock BR 4.04... LOL
Hi, i've just updated the phone to Vodafone JB OTA update, it works fine.
I wanted to have a Retail EU JB Rom, so i wanted to revert back to 4.0.4 with CFC_signed_customer_8.7.1I-110_IFW-DE-32_RTEU.xml.zip, and flash with RSD lite, but i can't even go to fastboot.
When i press vol down+power, i see the green light and motorola logo, but it just starts the phone to jellybean...
Where the fastboot has gone ???
AW: Hard BRICK ?
You are such an lucky guy. Dude, read this Thread, think about it and read it again. After that tell me again that you wanna downgrade from this OTA Update.
No i won't tell you how to get into fastboot and you should be thankful for that :screwy:
Sent from my XT890
Hello everyone, today I'm facing a strange problem
I was playing with my razr I (really good phone btw, which is rooted and UNLOCKED) and I had a random reboot and from that moment I can't do anything,
WHen I turn on my phone, the green light flashs and the screen says : Service Required Code Corrupt
I am not able to boot into fastboot, my PC doesn't recognize the phone either
I'm stuck ^^
SO if you have an idea i'm open
Thanks
What firmware was installed before your phone had bricked?
I was on jelly bean 4.1.2 stock french carrier
Try this. It can help.
http://forum.xda-developers.com/showthread.php?t=2184877
U1138 said:
Try this. It can help.
http://forum.xda-developers.com/showthread.php?t=2184877
Click to expand...
Click to collapse
Nop already tested, doesn't do anything but thanks
If I don't manage to repair my phone until tomorrow morning, I will go to my carreer shop and protest ^^
Hay guys I have exactly the same problem
nikitagu said:
Hay guys I have exactly the same problem
Click to expand...
Click to collapse
How does it happen for you ?
the update of ICS on JB
It seems like we are stucked on a weird brick......
Sent From My SlimBeaned Nexus S
yes, fully strange
metalmoot said:
Hello everyone, today I'm facing a strange problem
I was playing with my razr I (really good phone btw, which is rooted and UNLOCKED) and I had a random reboot and from that moment I can't do anything,
WHen I turn on my phone, the green light flashs and the screen says : Service Required Code Corrupt
I am not able to boot into fastboot, my PC doesn't recognize the phone either
I'm stuck ^^
SO if you have an idea i'm open
Thanks
Click to expand...
Click to collapse
i have the same problem
nothing?
I think your boot loader just got corrupted. Take your phone to a tecnical assistant. Your carrier won't do anything for you since you've an unlocked bootloader.
It will be just a waste of time.
I have the same "Service Required Code Corrupt" error after I tried to restore from a Nandroid Backup...
ohhh...
that sucks!!
Solution please
I have no
please you guys are the best to find a solution (
yes please
Me too, successfully downgraded JB to ICS, all was ok, made nandroid backup and boom.
Hello
I have a problem strikes and had unofficial rom 4.0.4 installed by CWM did the OTA update after restarting the phone showed "Service Required Code Corrupt" I used "jb_to_ics_unbrick" Now there is no message but the phone still does not start vibrates, lights up green Diodi and this is the end . RDS Lite shows him as Medfield can not upload the rom because you can not enter the fasboot, after pressing power + vol down nothing happens.
What else can I do to restore the rom? is this the end? and I have a brick?
sorry for the language ....
thanks for your help
Wiechu
Sorry to bring the bad news but yep, it's dead Jim.
Where are you for from ? If from UK name a price and shipping fee and I will buy your bricked phone calls from the us would you consider shipping it ?
Your phone is not 100% usless if bricked well not to be anyway
Sent from my XT890 using xda app-developers app
parenti2k9 said:
Where are you for from ? If from UK name a price and shipping fee and I will buy your bricked phone calls from the us would you consider shipping it ?
Your phone is not 100% usless if bricked well not to be anyway
Sent from my XT890 using xda app-developers app
Click to expand...
Click to collapse
Unfortunately, I live in Poland
wieo said:
Hello
I have a problem strikes and had unofficial rom 4.0.4 installed by CWM did the OTA update after restarting the phone showed "Service Required Code Corrupt" I used "jb_to_ics_unbrick" Now there is no message but the phone still does not start vibrates, lights up green Diodi and this is the end . RDS Lite shows him as Medfield can not upload the rom because you can not enter the fasboot, after pressing power + vol down nothing happens.
What else can I do to restore the rom? is this the end? and I have a brick?
sorry for the language ....
thanks for your help
Wiechu
Click to expand...
Click to collapse
Boot your phone as far as it goes and check if you get a connection via adb or fastboot
Motorola Moto X DE XT1053
http://www.youtube.com/watch?v=RKjDP9ZvusE
I have this problem.. My Xperia Z continue to reboot after few seconds from start.. I Already tried PC Companion, SUS, FlashTool with stock and Nothing continue to reboot ... Please someone help me.. If there's no solution .. I can bring it to service? I flashed a ROM and unlocked the bootloader, but having reflashed the Stock original and the bootloader Relocked I can use my warranty? PC Companion recognized the phone as original
Maybe I flashed the wrong stock? Can someone tell me, the right stock for my c6603?
need help please!
What if you connect your phone with the charger? does it reboot?
gripfly said:
What if you connect your phone with the charger? does it reboot?
Click to expand...
Click to collapse
Yep!
freno25 said:
Yep!
Click to expand...
Click to collapse
Ok, the battery isn't it I think.
How do you flash and what do you flash?
Please write it down step by step.
gripfly said:
Ok, the battery isn't it I think.
How do you flash and what do you flash?
Please write it down step by step.
Click to expand...
Click to collapse
Ok, first of all when I buy the phone Xperia Z (C6603/L36h) it work good, but after few days don't recognize the sim card for good.. I don't know if it mean somethings or if because I cut my sim to microsim but I does for good.. After some reboot it rework without ploblems. So it was a temporary problem (30 mins).. Ok second, I unlocked my bootloader and then I flash this ROM -> PAC-ROM http://forum.xda-developers.com/showthread.php?t=2208249 this version -> http://forum.xda-developers.com/devdb/project/dl/?id=1774 and then the gapps. All work fine because I does with other phones, after few days the phone start to reboot loop, but after some reboot it end after an hour like.. but start to recognize the sim and not, like he want.. like a mad.. after 1 days start to reboot loop like the video so after bootanimation the phone stay on, but after 30 secs reboot and again and again, I stopped this with POWER+VOL UP. I try to flash these stock because I don't know which use:
1) C6603_10.1.1.A.1.253_GLOBAL_unbranded_LTE -> After This I Try PC COMPANION (So I have to relock the booloader) but nothing SUS too
2) C6603_10.1.A.1.434_UK unbranded -> This won't work like the video so it start and black screen, the app system crash
3) C6603_10.3.1.A.0.244_Generic CE
4) C6603_10.3.1.A.0.244_Generic_DE
5) C6603_10.3.1.A.2.67_Generic UK
Ok. And now tell me exactly how do you flash with FlashTool.
gripfly said:
Ok. And now tell me exactly how do you flash with FlashTool.
Click to expand...
Click to collapse
With the lastest version of flashtool .. by pressing the first button "Flash device" and on the next windows "Flashmode" .. I select the firware and check all wipe.. the rest of checkbox unchecked .. Then "Flash" and when the programm ask to me put the device with the usb and vol down I does and done.
can u tell how to know the original firmware? On the box of the phone say: "SI 1270-6876.6 PL" from this I can found the firmware?
freno25 said:
can u tell how to know the original firmware? On the box of the phone say: "SI 1270-6876.6 PL" from this I can found the firmware?
Click to expand...
Click to collapse
Yes but you do not need exactly this firmware. Every generic firmware is the same. So you can download generic sweden or generic uk or whatever.
Edit: i think it is a hardware problem. Because you wipe all datas, made a clean flash and that more than once. But wait a bit, maybe a person which had the same prob can say it you. Or go and read a bit in the pac thread.
gripfly said:
Yes but you do not need exactly this firmware. Every generic firmware is the same. So you can download generic sweden or generic uk or whatever.
Edit: i think it is a hardware problem. Because you wipe all datas, made a clean flash and that more than once. But wait a bit, maybe a person which had the same prob can say it you. Or go and read a bit in the pac thread.
Click to expand...
Click to collapse
Yep it is very likely a hardware problem.
As this does not happen to other users.
Rather send your Z™ in repair.
Sent from my white Xperia™Z
Tommy-Geenexus said:
Yep it is very likely a hardware problem.
As this does not happen to other users.
Rather send your Z™ in repair.
Sent from my white Xperia™Z
Click to expand...
Click to collapse
After 1 days of researching Thanks to my SI I found the real original firmware and by another guide I downloaded the firmware by pc companion.. So now the problem is just one.. My sim card if I don't put the sim reboot because still searching, if I put a sim don't recoinize it and say "insert the rim and reboot" but ask me the pin of sim O.O, but if I turn THE FLIGHT MODE don't reboot and the sim work, like I can Import my contacts etc.. so the sim work too, the phone too , what's the problem then? O.O
up
Same issue with me. 1st, no sim error. After few days, its start to shutdown itself. But still can on. After that stuck at sony logo. Maybe radio related issue because it wont shut itself in recovery cwm nor twrp. But if I booting as usual, after several second it shutdown. Btw, production week 13W13
Sent from my R800i using xda app-developers app
My problem solved by changing new battery!!
Sent from my C6603 using xda app-developers app
Looking for a bit of help/advise RE being stuck on the Red M logo.
My battery died the other day and now when i try to boot the fone all i see is the Red M logo. I can access the fastboot menu (power button + vol dwn) but if i try any of the optons in there (recovery/factory etc) all that happens is the fone reboots to the red M logo.
Does anyone know what may have caused the problem and more importantly how i mite be able to fix it?
Thanks for any help.
*********Solved*********
Just an update to the original post to say i solved the problem thanks to Hashmutz and 5m00v3 's help.
For future reference incase anyone else lands here with the same problem what i did was followed this guide to re-flash the stock rom:
http://forum.xda-developers.com/showthread.php?t=2176753.
which i got from the link 5m00v3 provided later on the post but for easy ref i found mine here:
http://sbf.droid-developers.org/phone.php?device=13
Also, i didnt need to unlock the bootloader to do this which made my life a lot easier.
!!! And I'm also told DONT DOWNGRADE FROM 4.1.2 to 4.0.4 !!! or you will brick the fone so dont do that!!
And again Massive thanks Hashmutz and 5m00v3 for all the help.
Does it happen only because you previously ran out of battery?
If yes, do you use the Motorola charger?
I'm asking this because I once had some problem charging my Razr i using a old charger (a less powerful one).
I couldn't boot and could charge the device. It only happened when battery is very low.
This is maybe your issue...
Otherwise, if you didn't unlocked your bootloader you may ask the Moto support for an advice.
You battery may be defective.
I once had this same problem while flashing a Rom and the battery died and solved it by flashing Stock Rom (Recovery) in RSD (try doing the same).
Sent from my XT890 using XDA Premium 4 mobile app
Thanks for the response guys.
The battery seems to be fine. when its powered off you can see the battery charge status and its charging fully.
With regards to using RSD to flash the stock rom. I was looking at a few threads on this and wondering if it would work but do you know if i need to unlock the boot loaded to do this? And if so can this be done if i can only access the fastboot and stock recovery menu's?
You need unlocked bootloader in order to use RSD because it will flash partitions. I believe you can only unlock bootloader in fastboot and you'll only need adb on your computer to do that (Search for a tutorial if you don't know how to).
Sent from my XT890 using XDA Premium 4 mobile app
Hashmutz said:
You need unlocked bootloader in order to use RSD because it will flash partitions. I believe you can only unlock bootloader in fastboot and you'll only need adb on your computer to do that (Search for a tutorial if you don't know how to).
Sent from my XT890 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Great. Thanks a million. I'll get on that and give it a go. Will let you know if it works.
Hashmutz said:
You need unlocked bootloader in order to use RSD because it will flash partitions.
Click to expand...
Click to collapse
you DONT need to unlock bootloader to flash stock firmware with RSD Lite !!!
You only need Original Firmware: http://sbf.droid-developers.org/phone.php?device=13
+ RSD Lite 6.1.5
!!! AND DONT DOWNGRADE FROM 4.1.2 to 4.0.4 !!! or you will brick
IT WORKED!!!!!
Massive thanks Hashmutz and 5m00v3 for all the help. Really appreciate it. Also, thanks ciberbeb for adding your voice to the conversation too. Reallly glad to have the fone working again.
For future reference i'll add my solution to the original post incase anyone else comes along with the same problem but what i did was followed this guide to re-flash the stock rom:
http://forum.xda-developers.com/showthread.php?t=2176753.
As 5m00v3 said i didnt need to unlock the bootloader to do this so made my life a lot easier.
Again big thanks for all the help guys.
Thank you very much !
Your instructions saved my life and my phone!
Thank you !