Related
This guide is good? There are risks? If it's ok I start work: http://forum.xda-developers.com/showthread.php?t=1574332
Fedefriffo said:
This guide is good? There are risks? If it's ok I start work: http://forum.xda-developers.com/showthread.php?t=1574332
Click to expand...
Click to collapse
Best wishes !! :good:
Btw, this tool is great (http://forum.xda-developers.com/showthread.php?t=1241005) for unpacking/repacking boot.img
Anyways, its all personal choice.
coolsandie said:
Best wishes !! :good:
Btw, this tool is great (http://forum.xda-developers.com/showthread.php?t=1241005) for unpacking/repacking boot.img
Anyways, its all personal choice.
Click to expand...
Click to collapse
Using these does the same? (winzoz) :http://forum.xda-developers.com/showthread.php?t=1494036
imho it's too much work for you only...I suggest you to look for some help...I'm afraid i'm not into this so i'm unhelpful...by the way, best wishes!!!
Asbusto said:
imho it's too much work for you only...I suggest you to look for some help...I'm afraid i'm not into this so i'm unhelpful...by the way, best wishes!!!
Click to expand...
Click to collapse
I have much free time (TT) but if someone wants to help is welcome
EDIT: Just one question, from which phone should I begin the port?
Fedefriffo said:
Using these does the same? (winzoz) :http://forum.xda-developers.com/showthread.php?t=1494036
Click to expand...
Click to collapse
Yes, its the same.
coolsandie said:
Yes, its the same.
Click to expand...
Click to collapse
Thanks
i can help
But before starting with Kernel v3, I'd suggest be comfortable with those commands and compile existing 2.6.35 kernels without modifications and later with modifications. In that way, you could get more in touch with Kernel development.
Maybe these guides will help for reference :
- http://forum.xda-developers.com/showthread.php?t=1467149
- http://forum.xda-developers.com/showthread.php?t=1748297
- http://forum.xda-developers.com/showthread.php?t=1186409
Messi10 said:
i can help
Click to expand...
Click to collapse
Thanks .. For now I have to decide what to bring kernel.
Any advice?
I thought this: Here
Or this: Here
coolsandie said:
But before starting with Kernel v3, I'd suggest be comfortable with those commands and compile existing 2.6.35 kernels without modifications and later with modifications. In that way, you could get more in touch with Kernel development.
Maybe these guides will help for reference :
- http://forum.xda-developers.com/showthread.php?t=1467149
- http://forum.xda-developers.com/showthread.php?t=1748297
- http://forum.xda-developers.com/showthread.php?t=1186409
Click to expand...
Click to collapse
I think I'd better use a kernel already done ... I send a pm to mebitek
It's not worth it, you will have to forward-port a lot of things :/ Better take 2.6.xx.xx and backport stuff from msm3.0 kernel
TheWhisp said:
It's not worth it, you will have to forward-port a lot of things :/ Better take 2.6.xx.xx and backport stuff from msm3.0 kernel
Click to expand...
Click to collapse
Want to put the satisfaction of having the 3.0 kernel? XD I know it will be long but at least I tried
http://www.itworld.com/software/169503/new-linux-30-kernel-same-old-kernel
http://www.h-online.com/open/features/What-s-new-in-Linux-3-0-1279552.html
i suggest u din't waste your time building 3.0 kernel, i suggest u build CMW 6
Messi10 said:
http://www.itworld.com/software/169503/new-linux-30-kernel-same-old-kernel
http://www.h-online.com/open/features/What-s-new-in-Linux-3-0-1279552.html
Click to expand...
Click to collapse
There are no changes from 2.6.40 to version 3, but from 2.6.35 to version 3 are
EDIT: For CWM 6:http://forum.xda-developers.com/showthread.php?t=1788452
Fedefriffo said:
There are no changes from 2.6.40 to version 3, but from 2.6.35 to version 3 are
EDIT: For CWM 6:http://forum.xda-developers.com/showthread.php?t=1788452
Click to expand...
Click to collapse
for CWM 6 press Build Artifacts then all files in zip
Messi10 said:
for CWM 6 press Build Artifacts then all files in zip
Click to expand...
Click to collapse
And to make an installable zip?
I am faced with this screen
you need to flash recovery.img
only recovery.img?
i made a flashable zip
testing...
EDIT: is there any chance to brick because i don't want to brick my phone???
RomsWell V 1.1
Base: IMM76D.P3113UEBLH2
This is a mostly stock version of the OTA. With a some of the more basic features added.
This will flash for both the GT-P3113 and the 3110
V.1.1 Change log
Updated Base to P3113UEBLH2 Latest ICS firmware
Added Extended power menu (Thanks Ruben00) Hes spent alot of time screwing with this make sure you find his thanks button somewhere.
Small Kernel Changes
De-Odex
Zip Align
Rooted
init.d Support
Custom Boot Animation(To Change) /system/media/bootanimation.zip
Thanks c_live_lee for the RomsWell boot animation
Adding apps before flashing
If you open the ROM.zip with 7zip or winrar you can drop apks in the data/app folder in the zip and it will auto install the apps on first boot.
To Be Done
Adding a Slim Version Later Today
You Tell Me?
Install Instructions
Flash thru Custom Recovery
Superuser is fixed in this build.
I recommend a full wipe Data/Cache/System. You dont have to but dont report issues unless you have done a full wipe including system....
If coming from CM you will need to do a full wipe including System before flashing.
Download Here V1.1
Download Here V1.0
Reserved= Now for Kernel links
Mine too
Not possible to use this as an upgrade from your stock rooted?
AWESOME! Will be installing this ASAP. Thanks for your hard work man!
Gamer819 said:
Not possible to use this as an upgrade from your stock rooted?
Click to expand...
Click to collapse
You can. If you have issues full wipe and reflash.
jskolm said:
AWESOME! Will be installing this ASAP. Thanks for your hard work man!
Click to expand...
Click to collapse
Welcome
Kidney Poker said:
To Be Done
Extended Power Menu
Mass Storage
Click to expand...
Click to collapse
If you get mass storage, I'll love you forever.
Macadamia Daze said:
If you get mass storage, I'll love you forever.
Click to expand...
Click to collapse
Soon I hope.
DUDE!!!!! Badass boot animation! Installed right over the stock rooted rom and I be jammin' :good::good:
Some screenshot will be appreciated, i am running CM9 understand the flash method. But can you provide us with more info.
The rom sounds great but pictures please.
frank060272 said:
Some screenshot will be appreciated, i am running CM9 understand the flash method. But can you provide us with more info.
The rom sounds great but pictures please.
Click to expand...
Click to collapse
It's stock. No need for screen shots.
Kidney Poker said:
It's stock. No need for screen shots.
Click to expand...
Click to collapse
Okay awesome, with touchwiz and all the stock samsung apps. Sounds great is it as fast as CM9, then i will give it a go asap. :good:
frank060272 said:
Okay awesome, with touchwiz and all the stock samsung apps. Sounds great is it as fast as CM9, then i will give it a go asap. :good:
Click to expand...
Click to collapse
Super fast. I was excited to get poker's stock rooted but this is even better with his addons. Beauty of the stock with the speed and flexibility of a rooted custom.
Sent from my GT-P3113 using Tapatalk 2
Only one more question, because i am coming from a cm9 mod and the metalic a6 kernel.
Can i just flash the rom or do i have to flash the kernel first and the this awesome rom.
Offcourse after the wipe/cache/dalvik.
Can anyone please provide a how to.
frank060272 said:
Only one more question, because i am coming from a cm9 mod and the metalic a6 kernel.
Can i just flash the rom or do i have to flash the kernel first and the this awesome rom.
Offcourse after the wipe/cache/dalvik.
Can anyone please provide a how to.
Click to expand...
Click to collapse
Kernel is installed on first flash. If your coming from cm wipe system before flashing too.
Kidney Poker said:
Kernel is installed on first flash. If your coming from cm wipe system before flashing too.
Click to expand...
Click to collapse
Then this will be my new Rom when i get home from work, love the stock look, but hated the lag.
When this is as fast as they say, then i must have it.:good:
Thanks for the effort you guys put in the roms and that you take the time to answer our questions
Thanks a lot , you definitely help make this Tab awesome!
Sent from my AT&T Galaxy S2 running the CM10 Preview
I take it the ir blaster is working still? Its the only this keeping me from flashing another rom.
Sent from my GT-P3113 using xda app-developers app
KonnerTomlinson said:
Thanks a lot , you definitely help make this Tab awesome!
Sent from my AT&T Galaxy S2 running the CM10 Preview
Click to expand...
Click to collapse
Ty
hakkers420 said:
I take it the ir blaster is working still? Its the only this keeping me from flashing another rom.
Sent from my GT-P3113 using xda app-developers app
Click to expand...
Click to collapse
If it works on stock it should still work on this.
What is the different between 3113, 3110 and 3100? Will this rom work with 3100?
Since I'm new in the forums I can't post in the Development area this question, anyone knows if after you install the lite version (the one that runs with GB bootloader) you can go back from ICS to GB without making any special mod or change?
You know, just turn off the phone, power it on while pressing vol. down key and using CWM to install your old GB ROM.
Avenger2040 said:
Since I'm new in the forums I can't post in the Development area this question, anyone knows if after you install the lite version (the one that runs with GB bootloader) you can go back from ICS to GB without making any special mod or change?
You know, just turn off the phone, power it on while pressing vol. down key and using CWM to install your old GB ROM.
Click to expand...
Click to collapse
Yes, make a full wipe first and then flash any rom.
vanmarek said:
Yes, make a full wipe first and then flash any rom.
Click to expand...
Click to collapse
Sorry, totally new guy here in all this, by flash the rom you mean to use the install option from the CWM?
Avenger2040 said:
Sorry, totally new guy here in all this, by flash the rom you mean to use the install option from the CWM?
Click to expand...
Click to collapse
Yes.
vanmarek said:
Yes.
Click to expand...
Click to collapse
Superb! many thanks folks.
Avenger2040 said:
Superb! many thanks folks.
Click to expand...
Click to collapse
hi..i'm also have tonyp ics lite rom...i've installed it successfully..but i can't use flash player on browser?anyone can help?
No CWM. No TWRP. No custom ROM. And no JB.
purplepizza said:
No CWM. No TWRP. No custom ROM. And no JB.
Click to expand...
Click to collapse
Stock rom got TWRP to install.
Jelly Bean has arrived.
Devs are now doing CWM or TWRP for our phone.
Whats your point?
Sent from my GT-I9070
frzek said:
Stock rom got TWRP to install.
Jelly Bean has arrived.
Devs are now doing CWM or TWRP for our phone.
Whats your point?
Sent from my GT-I9070
Click to expand...
Click to collapse
Read the post. Ther is :gt-i9070P (NFC)
GT-I9070P®land
It's not forgotten , I'm still trying to get a custom kernel up and running.....except I bricked my 9070P
Sent from a Motorola Defy
purplepizza said:
No CWM. No TWRP. No custom ROM. And no JB.
Click to expand...
Click to collapse
Aure there will be update of jb for P too. It is came out just for Russia and non P now. Just be patient.
Послато са GT-I9070 користећи Тапаток 2
jb for 9070p
so, will it jb for 9070p or we are forgotten?
alex17498 said:
so, will it jb for 9070p or we are forgotten?
Click to expand...
Click to collapse
I know you're frustrated and restless , but do note someone else here is more frustrated and restless than you when it comes to this
"Viper kills.....again!"
jb for i9070p
CallMeVentus said:
I know you're frustrated and restless , but do note someone else here is more frustrated and restless than you when it comes to this
"Viper kills.....again!"
Click to expand...
Click to collapse
so nobody knows about this update?
but we hope...there is jb for 9070 so maybe we will get it too.....
alex17498 said:
so nobody knows about this update?
but we hope...there is jb for 9070 so maybe we will get it too.....
Click to expand...
Click to collapse
Samsung knows.
purplepizza said:
No CWM. No TWRP. No custom ROM. And no JB.
Click to expand...
Click to collapse
cocore kernel 4.1 has got TWRP. you choose: either NFC working or cocore+TWRP. I'm sure it's working correctly as I tried to flash some custom files and then successfully recovered from backup that I'd done before.
just wait it
9070P JB
I have actual info from T-Mobile that they will start testing JB for 9070P in 9.week. So it's possible to get JB during March or April.
Alfa123 said:
I have actual info from T-Mobile that they will start testing JB for 9070P in 9.week. So it's possible to get JB during March or April.
Click to expand...
Click to collapse
where did you get this information
ofhouse said:
where did you get this information
Click to expand...
Click to collapse
http://www.t-mobile.cz/web/cz/osobni/podpora/diskuzni-forum/-/message_boards/message/16616775
If you speak Czech... Otherwise use translator and find 21.1.2013
If the "P" users wants mod's then just learn or make donations for dev who works in it.. Thats how the scene of every device works.. In fact, the best way for getting some mod's is giving a hand in any form.. Think in how much money we spend in some unnecessary things that maybe donating can helps the dev to get the sources to work.. Thats what i think..
..aaarueeeteee yete arueeteee..
GT-I9070P Not Forgotten
Now that cocafe has released CoCore-P 1.0, I9070P now has TWRP. This is a much appreciated development. Thank you. I am curious if there are any other I9070P developments or are the developers waiting on a JB release for I9070P?
Actually I have been porting a HTC sense 4.2 Rom From Galaxy Gio To Galaxy Mini
I was struck at status 6 error which is sucess fully solved and ROM sucessfully Installs in CWM but when I Boot Nothing Happens after Samsung Logo the custom Boot animation even doesn't show up
I have using CM7 as base as the Gio Rom is also on 2.3.6
any sugesstion what should I do
rupesh1718 said:
Actually I have been porting a HTC sense 4.2 Rom From Galaxy Gio To Galaxy Mini
I was struck at status 6 error which is sucess fully solved and ROM sucessfully Installs in CWM but when I Boot Nothing Happens after Samsung Logo the custom Boot animation even doesn't show up
I have using CM7 as base as the Gio Rom is also on 2.3.6
any sugesstion what should I do
Click to expand...
Click to collapse
Gio ROM is based on CM7 or stock ?
F4uzan said:
Gio ROM is based on CM7 or stock ?
Click to expand...
Click to collapse
here it is
http://forum.xda-developers.com/showthread.php?t=1821701&highlight=htc+sense
rupesh1718 said:
here it is
http://forum.xda-developers.com/showthread.php?t=1821701&highlight=htc+sense
Click to expand...
Click to collapse
Ohh... my ! You won't port that ROM easily. It would takes a hundred hours to make it working & booting. CM7 isn't a right base.
Bugs:
- RIL FIXED
- no data
- wifi
- bluetooth
- camera/camrecorder
- sd card not detected FIXED
- htc bootanimation stays too long(only at booting, not with phone unlock)
- sound FIXED
- sensors
-backlights
- more I haven't found or not able to test (yet)
Click to expand...
Click to collapse
Why do you want to port an alpha ROM?
chemicalrage said:
Why do you want to port an alpha ROM?
Click to expand...
Click to collapse
Any other suggestion do u have
F4uzan said:
Ohh... my ! You won't port that ROM easily. It would takes a hundred hours to make it working & booting. CM7 isn't a right base.
Click to expand...
Click to collapse
What base is to be used
Please Help me
Updater-script problem...
Status 6 is basically trying to read a file that's not encoded in UNIX. Thanks ChevyNo1 for pointing that out!
Click to expand...
Click to collapse
<---Source: http://www.droidforums.net/forum/droid-development/69912-clockwork-update-zip-error-status-6-a.html
raducu7890 said:
Updater-script problem...<---Source: http://www.droidforums.net/forum/droid-development/69912-clockwork-update-zip-error-status-6-a.html
Click to expand...
Click to collapse
Dude i actually sucessfull solved the status 6 error already before posting here My problem is Rom get Install but does not gets bootup just shows samsung logo didnt even shows my custom Bootanimation
rupesh1718 said:
Dude i actually sucessfull solved the status 6 error already before posting here My problem is Rom get Install but does not gets bootup just shows samsung logo didnt even shows my custom Bootanimation
Click to expand...
Click to collapse
Oh...right...what kernel did u used??
raducu7890 said:
Updater-script problem...<---Source: http://www.droidforums.net/forum/droid-development/69912-clockwork-update-zip-error-status-6-a.html
Click to expand...
Click to collapse
raducu7890 said:
Oh...right...what kernel did u used??
Click to expand...
Click to collapse
Cm 7.2 as a base should i change this
rupesh1718 said:
Cm 7.2 as a base should i change this
Click to expand...
Click to collapse
Kernel he said, not ROM base. It isn't that easy porting a Sense ROM. Even, if you make it booted, you'll have a tons of bugs.
Sense isn't really that easy to port, you'll need to understand kernel, and system better before porting Sense.
how to port a rom--> http://forum.xda-developers.com/showthread.php?t=1598713
go to "porting from a different manufacturer"...have you done that step??
F4uzan said:
Kernel he said, not ROM base. It isn't that easy porting a Sense ROM. Even, if you make it booted, you'll have a tons of bugs.
Sense isn't really that easy to port, you'll need to understand kernel, and system better before porting Sense.
Click to expand...
Click to collapse
raducu7890 said:
how to port a rom--> http://forum.xda-developers.com/showthread.php?t=1598713
go to "porting from a different manufacturer"...have you done that step??
Click to expand...
Click to collapse
Both will help me its hard but not impossible
rupesh1718 said:
Both will help me its hard but not impossible
Click to expand...
Click to collapse
Yep, it's not impossible. Finished porting one, got it booting without touchscreen, sound, and vibration. IDK for the rest since i can't move any elements on screen.
F4uzan said:
Yep, it's not impossible. Finished porting one, got it booting without touchscreen, sound, and vibration. IDK for the rest since i can't move any elements on screen.
Click to expand...
Click to collapse
Hope We keep Helping each other
rupesh1718 said:
Hope We keep Helping each other
Click to expand...
Click to collapse
Oh... thanks !
I still don't know what happened in touchscreen. Logged the phone, but doesn't find anything related touchscreen.