Actually I have been porting a HTC sense 4.2 Rom From Galaxy Gio To Galaxy Mini
I was struck at status 6 error which is sucess fully solved and ROM sucessfully Installs in CWM but when I Boot Nothing Happens after Samsung Logo the custom Boot animation even doesn't show up
I have using CM7 as base as the Gio Rom is also on 2.3.6
any sugesstion what should I do
rupesh1718 said:
Actually I have been porting a HTC sense 4.2 Rom From Galaxy Gio To Galaxy Mini
I was struck at status 6 error which is sucess fully solved and ROM sucessfully Installs in CWM but when I Boot Nothing Happens after Samsung Logo the custom Boot animation even doesn't show up
I have using CM7 as base as the Gio Rom is also on 2.3.6
any sugesstion what should I do
Click to expand...
Click to collapse
Gio ROM is based on CM7 or stock ?
F4uzan said:
Gio ROM is based on CM7 or stock ?
Click to expand...
Click to collapse
here it is
http://forum.xda-developers.com/showthread.php?t=1821701&highlight=htc+sense
rupesh1718 said:
here it is
http://forum.xda-developers.com/showthread.php?t=1821701&highlight=htc+sense
Click to expand...
Click to collapse
Ohh... my ! You won't port that ROM easily. It would takes a hundred hours to make it working & booting. CM7 isn't a right base.
Bugs:
- RIL FIXED
- no data
- wifi
- bluetooth
- camera/camrecorder
- sd card not detected FIXED
- htc bootanimation stays too long(only at booting, not with phone unlock)
- sound FIXED
- sensors
-backlights
- more I haven't found or not able to test (yet)
Click to expand...
Click to collapse
Why do you want to port an alpha ROM?
chemicalrage said:
Why do you want to port an alpha ROM?
Click to expand...
Click to collapse
Any other suggestion do u have
F4uzan said:
Ohh... my ! You won't port that ROM easily. It would takes a hundred hours to make it working & booting. CM7 isn't a right base.
Click to expand...
Click to collapse
What base is to be used
Please Help me
Updater-script problem...
Status 6 is basically trying to read a file that's not encoded in UNIX. Thanks ChevyNo1 for pointing that out!
Click to expand...
Click to collapse
<---Source: http://www.droidforums.net/forum/droid-development/69912-clockwork-update-zip-error-status-6-a.html
raducu7890 said:
Updater-script problem...<---Source: http://www.droidforums.net/forum/droid-development/69912-clockwork-update-zip-error-status-6-a.html
Click to expand...
Click to collapse
Dude i actually sucessfull solved the status 6 error already before posting here My problem is Rom get Install but does not gets bootup just shows samsung logo didnt even shows my custom Bootanimation
rupesh1718 said:
Dude i actually sucessfull solved the status 6 error already before posting here My problem is Rom get Install but does not gets bootup just shows samsung logo didnt even shows my custom Bootanimation
Click to expand...
Click to collapse
Oh...right...what kernel did u used??
raducu7890 said:
Updater-script problem...<---Source: http://www.droidforums.net/forum/droid-development/69912-clockwork-update-zip-error-status-6-a.html
Click to expand...
Click to collapse
raducu7890 said:
Oh...right...what kernel did u used??
Click to expand...
Click to collapse
Cm 7.2 as a base should i change this
rupesh1718 said:
Cm 7.2 as a base should i change this
Click to expand...
Click to collapse
Kernel he said, not ROM base. It isn't that easy porting a Sense ROM. Even, if you make it booted, you'll have a tons of bugs.
Sense isn't really that easy to port, you'll need to understand kernel, and system better before porting Sense.
how to port a rom--> http://forum.xda-developers.com/showthread.php?t=1598713
go to "porting from a different manufacturer"...have you done that step??
F4uzan said:
Kernel he said, not ROM base. It isn't that easy porting a Sense ROM. Even, if you make it booted, you'll have a tons of bugs.
Sense isn't really that easy to port, you'll need to understand kernel, and system better before porting Sense.
Click to expand...
Click to collapse
raducu7890 said:
how to port a rom--> http://forum.xda-developers.com/showthread.php?t=1598713
go to "porting from a different manufacturer"...have you done that step??
Click to expand...
Click to collapse
Both will help me its hard but not impossible
rupesh1718 said:
Both will help me its hard but not impossible
Click to expand...
Click to collapse
Yep, it's not impossible. Finished porting one, got it booting without touchscreen, sound, and vibration. IDK for the rest since i can't move any elements on screen.
F4uzan said:
Yep, it's not impossible. Finished porting one, got it booting without touchscreen, sound, and vibration. IDK for the rest since i can't move any elements on screen.
Click to expand...
Click to collapse
Hope We keep Helping each other
rupesh1718 said:
Hope We keep Helping each other
Click to expand...
Click to collapse
Oh... thanks !
I still don't know what happened in touchscreen. Logged the phone, but doesn't find anything related touchscreen.
Related
OK, as i and heacatae talked about the Ihero port we came up to that were trying to port a CDMA verision to GSM, wich will make it harder to get the gsm to work (as the libs, is not located anywhere)
(P.S, Anyone know where CM7 2.3.2 Verision is, as the rom is based ony 2.3.2 we need 2.3.2 lib files)
what is working?
Motion Sensor.
SD-Card
2 : R0M DetailS:
Based on Cyanogen Mod 2.3.2 or later ;-)
Kernel: Mik's Lernel ([email protected]#21
Using Old Baseband (If i get the new baseband to work also, i will for sure make it for ya guys)
Thank's To:
Updating!
4 : estimated time:
Unknown ~ (Can variate because i will have alot of work to do, studies etc)
5 - drink a beer )
Test-exp-mod
http://www.multiupload.com/QTMSOTCZ02
Test-exp-mod 0.1
Coming soon
Release 1 (test-exp-mod)
Changelog -(Release 1 test-exp-mod)-
Added Lib's To get Motion sensor to work
Edited Build prop, So wifi details is correct
Coming Next:
Unknown, Need to get a logcat
link to original rom doesnt work
on which android it's based?
mat0122 said:
link to original rom doesnt work
on which android it's based?
Click to expand...
Click to collapse
its based on CM7 from htc imagic/ihero, i think its based on CM7 aswell
Link fixed ;P
Is this more of just a themed rom or does it actually have new features to it?
Screenshots?
22VIN said:
Screenshots?
Click to expand...
Click to collapse
read the post, he said once SD Card mount is working.
scruffy3666 said:
Is this more of just a themed rom or does it actually have new features to it?
Click to expand...
Click to collapse
yes it is based on CM7, wich is heavly moded, as this is from a port, from a port, from a port,
everything wont work as of now, but its at least much thing that does not work
its a port to start with xP
Wtf!! Y u discontinued? U mean yu can't try this or wat?? Thanks allot for trying... keep doing good!!
Sent from my LG-P500 using Tapatalk
SWEATTAIMI said:
Sorry this will be a dis-continued rom, as i am not able to try this rom
(due to reasons i needs to be contacted and this is my stock phone)
anyway, i will try to do my best
Click to expand...
Click to collapse
Give up? Aww, come on!
Sent from LGE XDA phone wit CM7 6.6.1
samcad said:
Wtf!! Y u discontinued? U mean yu can't try this or wat?? Thanks allot for trying... keep doing good!!
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
i can try but people wont be able to contact me, and the complains to that they must contact me so i need my phone on, and be contact able,
ofc i will work on this even if i cant try ;D
See Post 1
dax4182 said:
Give up? Aww, come on!
Sent from LGE XDA phone wit CM7 6.6.1
Click to expand...
Click to collapse
dont post huge pics thanks
i dont give up, i just need my phone, and i cant work with phone, i can only create zip's and upload
Just to test this purpose I gonna flash this ....
Sent from my LG-P500 using Tapatalk
what happened to the LG P505 rom?
SWEATTAIMI said:
dont post huge pics thanks
i dont give up, i just need my phone, and i cant work with phone, i can only create zip's and upload
Click to expand...
Click to collapse
Ohk... Lol
Sent from LGE XDA phone wit CM7 6.6.1
samcad said:
Just to test this purpose I gonna flash this ....
Sent from my LG-P500 using Tapatalk
Click to expand...
Click to collapse
No problem
jobankler said:
what happened to the LG P505 rom?
Click to expand...
Click to collapse
i dont know you tried to install dr.notor's rom ?
SWEATTAIMI said:
i dont know you tried to install dr.notor's rom ?
Click to expand...
Click to collapse
no that is a p500 rom and has color issues! u have to modify carlosrom cuz thats the only that works for it.
Guys ... any screenies ...?
EDIT:
Just flashed the ROM and the first thing that came to my mind was .... WOW !!!!
It has a lot of bugs, but I,m confident that SWEATTAIMI will be able to squash them and deliver us a working version.
Best of luck .... SWEATTAIMI
Bugs so fare i know:
Sound dont work.
Wifi bt and gps dont work.
chanelog: V0.3 :credits to KeiranFTW for fixing touchscreen.
now you can call (you have singnal now).
Downloads:
V0.3:http://www.multiupload.com/DSOSM3PSKG
V0.2: tnx to my partner:keiranftw. http://dl.dropbox.com/u/13729847/WildICE.zip
link: V0.1 : http://www.multiupload.com/RCPXQFDLW8
Credits to:
KeiranFTW for fixing the touchscreen and maked a kernel.
Impressive work. Looking forward to you developing it into stable rom
this might help?
http://forum.xda-developers.com/showthread.php?t=1328515
Congrats kaassaus! Nice to see you creating the first ICS rom for the wildfire. I'll follow this thread actively from now on!
haha! good news! thanks kaasaus, waiting for stable release!!!
djinn0 said:
haha! good news! thanks kaasaus, waiting for stable release!!!
Click to expand...
Click to collapse
Relax guys. He only took the zip of the HTC Eris and flashed it. He didn't do anything yet.
fifarunnerr said:
Relax guys. He only took the zip of the HTC Eris and flashed it. He didn't do anything yet.
Click to expand...
Click to collapse
change the build.prop and the boot.img from cm7
now iam going to look at the touchscreen problem.
kaassaus said:
hey people ics is booted on my wildfire and now its working but only the touchscreen is not working only a pionter looking at it but it boots )
Bugs so fare i know:
touchscreen not work.
need people who whant to help because idont have so much time this week
link: V0.1 : http://www.multiupload.com/RCPXQFDLW8
Click to expand...
Click to collapse
Do you think that might be kernel related?
KeiranFTW said:
Do you think that might be kernel related?
Click to expand...
Click to collapse
no its not kernel related need the touchscreen drivers.
kaassaus said:
no its not kernel related need the touchscreen drivers.
Click to expand...
Click to collapse
take the touchscreen libs from CM7 and replace the ones in there with the CM7 ones.
KeiranFTW said:
take the touchscreen libs from CM7 and replace the ones in there with the CM7 ones.
Click to expand...
Click to collapse
and what than?
kaassaus said:
and what than?
Click to expand...
Click to collapse
You may have a chance of the touchscreen working..?
Justice™ said:
You may have a chance of the touchscreen working..?
Click to expand...
Click to collapse
Took the words out of my mouth! xD
We will get AOSP working eventually, some armv6 devices will get CM9 and so we can just port it over ourselves.
There might be loads of patching though.
The most important first is working touchscreen , later everything should be easier to repair (libs from CM7 may work ) .
There are no problems with res ?
Maybe when i'll have a moment gonna flash for a second and have a look by myself
Formiak said:
The most important first is working touchscreen , later everything should be easier to repair (libs from CM7 may work ) .
There are no problems with res ?
Maybe when i'll have a moment gonna flash for a second and have a look by myself
Click to expand...
Click to collapse
i'm working on the touchscreen fix
Formiak said:
The most important first is working touchscreen , later everything should be easier to repair (libs from CM7 may work ) .
There are no problems with res ?
Maybe when i'll have a moment gonna flash for a second and have a look by myself
Click to expand...
Click to collapse
Being based on the eris port, and seeing how everything looks on that. Probably not. I guess there might be some resizing here an there. But I doubt it!
eris is 320x480, wildfire 240x320, then i think the rom need resizing
djinn0 said:
eris is 320x480, wildfire 240x320, then i think the rom need resizing
Click to expand...
Click to collapse
i have try to going to the homescreen i only came there and that not need resizeing
djinn0 said:
eris is 320x480, wildfire 240x320, then i think the rom need resizing
Click to expand...
Click to collapse
Not necessarily, AOSP supports multiple (if not all) resolutions, the elements of ICS will be sized according to the DPI set in the build.prop.
HTC's Sense UI on the other hand, is only created for one device at a time in mind.
Keiran
Yea that sure but I don't know how the building procces is , if there is building only LDPI or MDPI or HDPI or all in one . If so (the last) that would be great . Flashing right now that
My friend own's a galaxy pop. I roorted it on sunday using SOC and flashed CWM recovery. but whichever rom i try to install, i get the message 'installation aborted'. when i start the phone, it works. but very unstable. random restarts, or the phone remains horizontal (not straight, qwerty keymode). motion doesnt work. Probably because its not installed properly.
I tried flashing the recovery again but no change. tried the latest recovery. also tried the older version of CWM recovery (v4.0.0.5). still no change.
In the end, i flashed a stock 2.3.6 gb rom for region:india. now there is no data connection nd wifi works.
don't know what has gone wrong.
I used Odin and tapps_v1(or whatever) to first flash android 2.3.6 immediatly after rooting. then i flashed CWM recovery. what shall i do????
PL HELP......................
My friend is pretty upset.
akhillad said:
My friend own's a galaxy pop. I roorted it on sunday using SOC and flashed CWM recovery. but whichever rom i try to install, i get the message 'installation aborted'. when i start the phone, it works. but very unstable. random restarts, or the phone remains horizontal (not straight, qwerty keymode). motion doesnt work. Probably because its not installed properly.
I tried flashing the recovery again but no change. tried the latest recovery. also tried the older version of CWM recovery (v4.0.0.5). still no change.
In the end, i flashed a stock 2.3.6 gb rom for region:india. now there is no data connection nd wifi works.
don't know what has gone wrong.
I used Odin and tapps_v1(or whatever) to first flash android 2.3.6 immediatly after rooting. then i flashed CWM recovery. what shall i do????
PL HELP......................
My friend is pretty upset.
Click to expand...
Click to collapse
Galaxy Pop and Mini are same dude ??
Cheers
avilove4u said:
Galaxy Pop and Mini are same dude ??
Cheers
Click to expand...
Click to collapse
yes, they r the same.
just google a bit. galaxy mini is called galaxy pop in india.
Flash to 2.3.4 kpk (my recomendation). Rooting not reqd.
Flash cwm by squadzone.
Flash cm7.
@roofrider
For ur sig check this out http://forum.xda-developers.com/showthread.php?t=1521604
R.A.G.E said:
@roofrider
For ur sig check this out http://forum.xda-developers.com/showthread.php?t=1521604
Click to expand...
Click to collapse
Thanks.
He's creates banners for others? Images are not showing up.
Anyway i'll stick with this for sometime.
roofrider said:
Thanks.
He's creates banners for others? Images are not showing up.
Anyway i'll stick with this for sometime.
Click to expand...
Click to collapse
Yep he did create banner but i think it is donation only
You can request an avatar if u like.
Dont know about pic not show up didnt work for me too
R.A.G.E said:
Yep he did create banner but i think it is donation only
You can request an avatar if u like.
Dont know about pic not show up didnt work for me too
Click to expand...
Click to collapse
It's donation based.. actually i want to get the psd file so that i can make my own signature
Cheers
avilove4u said:
It's donation based.. actually i want to get the psd file so that i can make my own signature
Cheers
Click to expand...
Click to collapse
I think he provide template herehttps://sites.google.com/site/androidbyyorzua/design-factory
Sent from my GT-S5570 using Tapatalk 2
R.A.G.E said:
I think he provide template herehttps://sites.google.com/site/androidbyyorzua/design-factory
Sent from my GT-S5570 using Tapatalk 2
Click to expand...
Click to collapse
But it has Watermark can't you see? ? then how will i make my own signature?
Cheers
avilove4u said:
But it has Watermark can't you see? ? then how will i make my own signature?
Cheers
Click to expand...
Click to collapse
I'm wondering this too
D1358531 said:
I'm wondering this too
Click to expand...
Click to collapse
He will not share his work without donations
Cheers
Seem so
Sent from my GT-S5570 using Tapatalk 2
This guide is good? There are risks? If it's ok I start work: http://forum.xda-developers.com/showthread.php?t=1574332
Fedefriffo said:
This guide is good? There are risks? If it's ok I start work: http://forum.xda-developers.com/showthread.php?t=1574332
Click to expand...
Click to collapse
Best wishes !! :good:
Btw, this tool is great (http://forum.xda-developers.com/showthread.php?t=1241005) for unpacking/repacking boot.img
Anyways, its all personal choice.
coolsandie said:
Best wishes !! :good:
Btw, this tool is great (http://forum.xda-developers.com/showthread.php?t=1241005) for unpacking/repacking boot.img
Anyways, its all personal choice.
Click to expand...
Click to collapse
Using these does the same? (winzoz) :http://forum.xda-developers.com/showthread.php?t=1494036
imho it's too much work for you only...I suggest you to look for some help...I'm afraid i'm not into this so i'm unhelpful...by the way, best wishes!!!
Asbusto said:
imho it's too much work for you only...I suggest you to look for some help...I'm afraid i'm not into this so i'm unhelpful...by the way, best wishes!!!
Click to expand...
Click to collapse
I have much free time (TT) but if someone wants to help is welcome
EDIT: Just one question, from which phone should I begin the port?
Fedefriffo said:
Using these does the same? (winzoz) :http://forum.xda-developers.com/showthread.php?t=1494036
Click to expand...
Click to collapse
Yes, its the same.
coolsandie said:
Yes, its the same.
Click to expand...
Click to collapse
Thanks
i can help
But before starting with Kernel v3, I'd suggest be comfortable with those commands and compile existing 2.6.35 kernels without modifications and later with modifications. In that way, you could get more in touch with Kernel development.
Maybe these guides will help for reference :
- http://forum.xda-developers.com/showthread.php?t=1467149
- http://forum.xda-developers.com/showthread.php?t=1748297
- http://forum.xda-developers.com/showthread.php?t=1186409
Messi10 said:
i can help
Click to expand...
Click to collapse
Thanks .. For now I have to decide what to bring kernel.
Any advice?
I thought this: Here
Or this: Here
coolsandie said:
But before starting with Kernel v3, I'd suggest be comfortable with those commands and compile existing 2.6.35 kernels without modifications and later with modifications. In that way, you could get more in touch with Kernel development.
Maybe these guides will help for reference :
- http://forum.xda-developers.com/showthread.php?t=1467149
- http://forum.xda-developers.com/showthread.php?t=1748297
- http://forum.xda-developers.com/showthread.php?t=1186409
Click to expand...
Click to collapse
I think I'd better use a kernel already done ... I send a pm to mebitek
It's not worth it, you will have to forward-port a lot of things :/ Better take 2.6.xx.xx and backport stuff from msm3.0 kernel
TheWhisp said:
It's not worth it, you will have to forward-port a lot of things :/ Better take 2.6.xx.xx and backport stuff from msm3.0 kernel
Click to expand...
Click to collapse
Want to put the satisfaction of having the 3.0 kernel? XD I know it will be long but at least I tried
http://www.itworld.com/software/169503/new-linux-30-kernel-same-old-kernel
http://www.h-online.com/open/features/What-s-new-in-Linux-3-0-1279552.html
i suggest u din't waste your time building 3.0 kernel, i suggest u build CMW 6
Messi10 said:
http://www.itworld.com/software/169503/new-linux-30-kernel-same-old-kernel
http://www.h-online.com/open/features/What-s-new-in-Linux-3-0-1279552.html
Click to expand...
Click to collapse
There are no changes from 2.6.40 to version 3, but from 2.6.35 to version 3 are
EDIT: For CWM 6:http://forum.xda-developers.com/showthread.php?t=1788452
Fedefriffo said:
There are no changes from 2.6.40 to version 3, but from 2.6.35 to version 3 are
EDIT: For CWM 6:http://forum.xda-developers.com/showthread.php?t=1788452
Click to expand...
Click to collapse
for CWM 6 press Build Artifacts then all files in zip
Messi10 said:
for CWM 6 press Build Artifacts then all files in zip
Click to expand...
Click to collapse
And to make an installable zip?
I am faced with this screen
you need to flash recovery.img
only recovery.img?
i made a flashable zip
testing...
EDIT: is there any chance to brick because i don't want to brick my phone???
Hi guys, I was just wondering if someone is going to port cm10.2 on our beloved galaxy mini.
Don't hope too much, don't happy too much.
Porting Android 4.3 to Mini is a challenge. So it'll take A LOONG time to complete or reach first beta.
F4uzan said:
Don't hope too much, don't happy too much.
Porting Android 4.3 to Mini is a challenge. So it'll take A LOONG time to complete or reach first beta.
Click to expand...
Click to collapse
I might try to compile it, but thanks for responding.
nogai said:
I might try to compile it, but thanks for responding.
Click to expand...
Click to collapse
I might help you when i have time.
F4uzan said:
I might help you when i have time.
Click to expand...
Click to collapse
Thank you, I'm just a 13 year old "wannabe" developer .
nogai said:
Thank you, I'm just a 13 year old "wannabe" developer .
Click to expand...
Click to collapse
Ha ! Did you think you're the only one who's 13 ? I'm 13 too
BTW, i'm starting to sync CM sources. Let's try it !
F4uzan said:
Ha ! Did you think you're the only one who's 13 ? I'm 13 too
BTW, i'm starting to sync CM sources. Let's try it !
Click to expand...
Click to collapse
I need to do a fresh install of ubuntu on virtualbox and after that I'll start syncing.
Dude, how much space is required for syncing?
nogai said:
Dude, how much space is required for syncing?
Click to expand...
Click to collapse
Around 10 GB for Gingerbread, and more is required for JB and higher
F4uzan said:
Around 10 GB for Gingerbread, and more is required for JB and higher
Click to expand...
Click to collapse
Ok, thanks.
How's work going?
nogai said:
How's work going?
Click to expand...
Click to collapse
Still syncing... my net speed is totally slow.
F4uzan said:
Still syncing... my net speed is totally slow.
Click to expand...
Click to collapse
agan curhat nih ye :laugh: how do you think about 4.3 performance at mini??
Laruku Anan said:
agan curhat nih ye :laugh: how do you think about 4.3 performance at mini??
Click to expand...
Click to collapse
Pfft... :laugh: The performance won't be as good as Jellybean 4.1 or 4.2, still syncing.... -.- 50 KB/s
Performance will be like CM10.1 after flash, as I doubt that Mini supports OpenGL 3.
Sent from my GT-S5570 using xda premium
ast00 said:
Performance will be like CM10.1 after flash, as I doubt that Mini supports OpenGL 3.
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
Yes, i think it'll be, and true Mini won't fully supports OpenGL 3. BTW, syncing halted since my net speed are getting worser and worser.
F4uzan said:
Yes, i think it'll be, and true Mini won't fully supports OpenGL 3. BTW, syncing halted since my net speed are getting worser and worser.
Click to expand...
Click to collapse
Dude, why don't try to port something easier like cm6, 'cause there's no cm6 for tass and then we'll try to compile cm10.2?
Edit: I'm going to compile it
nogai said:
Dude, why don't try to port something easier like cm6, 'cause there's no cm6 for tass and then we'll try to compile cm10.2?
Click to expand...
Click to collapse
, why CM6 ? We have CM7.2 which is stabler.
F4uzan said:
, why CM6 ? We have CM7.2 which is stabler.
Click to expand...
Click to collapse
CM6, just for warming up and then maybe cm10.1 or cm10.2
Edit:5 mins ago, I started syncing
nogai said:
CM6, just for warming up and then maybe cm10.1 or cm10.2
Edit:5 mins ago, I started syncing
Click to expand...
Click to collapse
CM7.2 WILL be our warm up. Then CM9, then CM10.1, or CM10.2