Hi guys. Recently I have been using my phone and it hit 1% battery then went dead.
I charged it and rebooted it but it was stuck on the samsung logo.
I cleared my cache and dalvic but no luck ):
I also tried to Go back to GB stock and when I did it it works but keeps saying android something as crashed and every time I hit OK, It just popped up again.
I tried using Odin on my PC to go back to ICS but STILL stuck on the logo.
Made a NANDROID backup but still no luck...
Please help me!
are you on ICS now? if so, install philz kernel from recovery , reboot into recovery and perform a wipe data / factory reset. this should boot up the phone. if on GB, just go into recovery and do a factory reset
nokiamodeln91 said:
are you on ICS now? if so, install philz kernel from recovery , reboot into recovery and perform a wipe data / factory reset. this should boot up the phone. if on GB, just go into recovery and do a factory reset
Click to expand...
Click to collapse
Hi, I did a factory reset. Although it was my final resort.
Do you think my phone will still be stuck when I recover from NANDROID?
if the nandroid has bad data then it will. but still worth a try as you can do a factory wipe to get booted again
nokiamodeln91 said:
if the nandroid has bad data then it will. but still worth a try as you can do a factory wipe to get booted again
Click to expand...
Click to collapse
Ok I will give it a try thank you I will report back if anything is gone wrong.
+1 thanks
this happened with me a month ago , i installed an app from store and it asked to reboot my device , when i did so , my note lagged on the shining samsung logo .
All what i did is flashing my note with original stock firmware using Odin , and the device still working perfectly till now ..
** my device version is ICS .
** most devices won't loss their data using this method , 'cuz it's like a software update ..
best of luck
Momen Sars
Related
This concerns my galaxy note n7000. I had a rooted checkrom v4 working on my note. I tried to install criskelorom v2 and got bootloops. I then tried to go back to stock via odin and flashed stock N7000 KL3 ROM which i had earlier used, I had to go to stock because after bootloop even recovery was not working. now after flashing stock i am getting a strange problem of the phone getting stuck at the welcome to gt-n7000 screen . "touch the android to begin" . nothing is happening after touching the android on the screen although i can change the language etc and even the pull down notification is also working but the phone is stuck at the initial stage. I have a nandroid backup of my initial checkrom in my internal sd card but cannot restore it before installing a rom with root and cwm. Kindly help . Thanks.
I'm having the exact problem. I'm hoping we can create a soft brick sticky thread. I walked away from my phone last night because I was getting frustrated.
My attempts to flash stock ROM via Odin resulted in the "not responding" message in windows. I can get to both CWM and download mode, however any ROM flashed via CWM results in the behavior described by the OP. fortunately I have access to another Samsung phone, so I can double check driver installation (although it worked for flashing previously).
I'm continuing a search through the forums to find some alternate methods for unbricking. Hope someone has an idea.
Thanks!
It seems that the stock roms i was trying to flash were nonwipe ones so i flashed xxla3 which is a wipe rom and was able to boot . I then flashed the earlier kl3 rom over this rom because kl3 is rootable. I then rooted and installed cwm booted into recovery and restored my earlier nandroid backup. I think the situation arises because the nonwipe rom was unable to clear the cache , user data etc
Thank you for the information. I had exactly the same problem. What did you use to root KL3 ?
Just wipe both cash and user data, and reboot.
reboot to recovery mode -> mount and storage -> format system, format cache, format data.
and do a factory reset and wipe cache.
problem should be solved cause that's what i did
Flo1389 said:
Just wipe both cash and user data, and reboot.
Click to expand...
Click to collapse
Thanks
liewkingyan said:
reboot to recovery mode -> mount and storage -> format system, format cache, format data.
And do a factory reset and wipe cache.
Problem should be solved cause that's what i did
Click to expand...
Click to collapse
daaamnnn!!! I'm scared to dead because of this!! Thanks dude!!!, no more **** ass ics
I had an issue like this once or twice.
http://www.youtube.com/watch?v=L5XjF6sPef4
This skips the that screen. then I cleared some things like google framework and it all was peachy
But its not wroking for me
I upgraded to ICS with mobile ODIN method described in development forum and everything went OK, ICS was there and working OK. Then i did factory reset and that also went ok, then i did backup with clockwork mod an decided to restore my old gingerbread ROM because I haven't got tim to play with ICS today. Then everything went wrong. While restoring Gingerbread ROM my note just reseted itself and could not boot pass galaxy note letters. Then tried to get him in download mode and succeded to flash it with factory KJ1 rom, but when it booted, it's just not working. It's stuck in Welcome to GT-N7000 (touch the android icon to begin) screen, and just inform me that some of the services could not be started. When i touch android icon nothing happens. Is there a way to repair this an can anibody tell me what happened?
Take your battery out, wait for 1 minute.
Put it back in, boot into CWM (Volume up + Home + Power)
Do a factory reset.
Reboot.
I don't have cwm anymore because i flashed factory kj1 rom with odin from my PC
imagio1 said:
I don't have cwm anymore because i flashed factory kj1 rom with odin from my PC
Click to expand...
Click to collapse
You will still have stock android recovery. Go wipe cache and format data there and reboot.
Thanks very much, it did work, I really am a noob
Hi guys.
I was planning to install CM 7.2 on my Galaxy Ace for quite a long time and decided to do it today. I have rooted my phone and installed CWM on it, following steps described on the forum. I have made some backups with CWM and My Backup Root. Everything was fine, I have turned my phone off and back on without any problems. However, after doing the factory reset and clearing cache partition via CWM I cannot get past the bootloop animation, it keeps showing my network logo and Samsung logo. After about 5 minutes I have pulled the battery out and restored the CWM backup, but it didn't help. Any idea of what to do to bring my phone back to life?
Thanks,
Draggy
I have flashed my phone with the latest Samsung Galaxy Ace firmware using Odin, but it didn't help - instead of O2 logo there is only the Samsung animation now. I really don't know what to do.
Try a FULL Odin package, and make sure your phone model is the exact one of the rom you are flashing (5830/5830i etc)
Sent from my Ace on Apocalypse Rom
After flashing the new software I had to take the battery out and then go to the recovery mode and do the factory reset again. I think I now need to root my phone again and install CWM, as I've got the stock recovery now. Thanks for help.
Draggy28 said:
After flashing the new software I had to take the battery out and then go to the recovery mode and do the factory reset again. I think I now need to root my phone again and install CWM, as I've got the stock recovery now. Thanks for help.
Click to expand...
Click to collapse
Be careful next time
Sent from my GT-S5830 using xda app-developers app
The problem is that I haven't done anything wrong. I followed the steps from the forum and I would have never thought that the bootloop may happen because of factory resetting the phone. Anyway, I'll try and get the CM working tonight. :silly:
Hi
I wanted to update my 5830, so I flashed firmware via ODIN to the newest, all was good since I wanted to give my phone to my wife, and I needed to do factory reset... after that my phone stuck in bootloop, cant go more than samsung logo, sometimes animation, and its blinking and restarting again. What can I do? I performed new flash with new rom - all going good, but I'm trying to factory reset it again, and its bootlooping again...
can some1 help me back my phone to good condition with factory reset possibility?
hexen88 said:
Hi
I wanted to update my 5830, so I flashed firmware via ODIN to the newest, all was good since I wanted to give my phone to my wife, and I needed to do factory reset... after that my phone stuck in bootloop, cant go more than samsung logo, sometimes animation, and its blinking and restarting again. What can I do? I performed new flash with new rom - all going good, but I'm trying to factory reset it again, and its bootlooping again...
can some1 help me back my phone to good condition with factory reset possibility?
Click to expand...
Click to collapse
brother after flashing new roms you should
1 factory reset
2 wipe cache partition
both are necessary
i think you did not wiped cache partition
do it and phone will boot
good luck :good::good:
aditya rathee said:
brother after flashing new roms you should
1 factory reset
2 wipe cache partition
both are necessary
i think you did not wiped cache partition
do it and phone will boot
good luck :good::good:
Click to expand...
Click to collapse
Exactly! Try that aditya said to you
Viper The Ripper said:
Exactly! Try that aditya said to you
Click to expand...
Click to collapse
thanks for praising sir
also can you update link to aosp ics by olddroid its link does not work anymore
aditya rathee said:
brother after flashing new roms you should
1 factory reset
2 wipe cache partition
both are necessary
i think you did not wiped cache partition
do it and phone will boot
good luck :good::good:
Click to expand...
Click to collapse
I'v done this several times, by cwm and by stock recovery - same result. Finally I've installed branded rom and it's working perfectly to the moment I wanted to uninstall operator apps by titanium backup. Sometimes at the finishing of uninstall phone reboots... but working.
hexen88 said:
I'v done this several times, by cwm and by stock recovery - same result. Finally I've installed branded rom and it's working perfectly to the moment I wanted to uninstall operator apps by titanium backup. Sometimes at the finishing of uninstall phone reboots... but working.
Click to expand...
Click to collapse
yeah n between uninstalling system apps system boots but thats not a problem as those apps which you wanna remove get removed even if your phone gets rebooted
Did you also wipe dalvik? Try to flash a stock (old) firmware via odin and do this steps.
1.reboot to recovery
2.wipe data /factory reset
3.wipe cache partition
4.reboot
İt has to boot normally in 2-3 minutes. İf doesnt tou gotta make a Jtag operation which you cannot do without the RiffBox.
Sent from my Nokia 3310
You should flash a multi package firmware when rolling back from custom roms.XXKPH is one such rom,then you can flash latest update afterwards.Cache etc never matter for me
side_effect said:
You should flash a multi package firmware when rolling back from custom roms.XXKPH is one such rom,then you can flash latest update afterwards.Cache etc never matter for me
Click to expand...
Click to collapse
1st XXKPH, then what? Is that with Polish language?
Xxkph is eastern europe version. İnstall it and make factory reset after first succesful boot
Sent from my Nokia 3310
hi i recently decided to get my phone rooted and made use of srs android root to root my phone and later i installed twrp , once i flashed twrp after going into recovery mode i wiped the dalvik cache and did a complete factory wipe of the phone later i flashed a rom to the phone it displayed it was sucessfull later on rebooting the phone the twrp comes back and it never goes into the rom . i havent got a back up , and and i wiped the dalvik again and did a factory reset now i have only the twrp running ,is there anyway i can flash back the stock and bring it to working condition ? please help me
abhinavmohan said:
hi i recently decided to get my phone rooted and made use of srs android root to root my phone and later i installed twrp , once i flashed twrp after going into recovery mode i wiped the dalvik cache and did a complete factory wipe of the phone later i flashed a rom to the phone it displayed it was sucessfull later on rebooting the phone the twrp comes back and it never goes into the rom . i havent got a back up , and and i wiped the dalvik again and did a factory reset now i have only the twrp running ,is there anyway i can flash back the stock and bring it to working condition ? please help me
Click to expand...
Click to collapse
Download your device's stock firmware and flash it using Odin.
Read this or this.
You wiped cache?
Sent from my phone. Why would you need to know what device I have?