[Q] Successfully flashed alternate stock ROM but still rejects my SIM - Why? - Galaxy S III I9305 (4G LTE + 2GB RAM) Q&A, Help &

Apologies in advance for the newbieness of this question. I have scanned the forums for an answer to no avail.
I have a Samsung Galaxy S3 LTE - i9305. It was on the UK Orange network and my only reason for rooting and flashing it was to use it on the UK Vodafone network. I assumed that the only thing I would need to do was put a Vodafone stock ROM on it and bob's your uncle it would work.
I rooted with CF Auto root and installed Samsung-Updates.com-GT-I9305-VOD-I9305XXBMA3-1357552475. Which is the ROM used in the Vodafone/JB version of the phone replacing the original Orange ROM. Popped in my Voda SIM and it still prompts me for the SIM Network unlocking code.
What am I missing here? I assumed that wiping the Orange ROM and replacing it with the Vodafone ROM would allow the phone to accept my Vodafone SIM.
Any help appreciated.

No, you need to unlock it, check the development section, there's a tool

NotLikeThis said:
Apologies in advance for the newbieness of this question. I have scanned the forums for an answer to no avail.
I have a Samsung Galaxy S3 LTE - i9305. It was on the UK Orange network and my only reason for rooting and flashing it was to use it on the UK Vodafone network. I assumed that the only thing I would need to do was put a Vodafone stock ROM on it and bob's your uncle it would work.
I rooted with CF Auto root and installed Samsung-Updates.com-GT-I9305-VOD-I9305XXBMA3-1357552475. Which is the ROM used in the Vodafone/JB version of the phone replacing the original Orange ROM. Popped in my Voda SIM and it still prompts me for the SIM Network unlocking code.
What am I missing here? I assumed that wiping the Orange ROM and replacing it with the Vodafone ROM would allow the phone to accept my Vodafone SIM.
Any help appreciated.
Click to expand...
Click to collapse
You can unlock it by following these instructions
Please note that these instructions will only work if you’re running Android 4.1 or higher.
Procedure
Step 1: On your Galaxy Note II, launch the phone app and press these keys:
*#197328640#
Step 2: From the Main Menu, navigate to [1] UMTS > [1]Debug Screen > [8] Phone Control > [6] Network Lock > Options.
Step 3: In the Options screen, choose [3] Perso SHA256 OFF. Wait for 30 seconds after making this selection.
Step 4: Go back one step by pressing the menu key, and then back once. You should now again be in [6] Network Lock
Step 5: Here, now choose [4]NW Lock NV Data INITIALLIZ. Wait for one minute after making the choice.
Step 6: After a minute has passed, reboot your Galaxy Note II.
Your phone should now be unlocked, and ready for use with any carrier. Please note that you will NOT receive any sort of confirmation on the screen, so just put in a different carrier’s SIM and try it out.

unlock your GT-I9305
Hi,
A Google translate from a french forum to unlock your GT-I9305
[TUTO][i9305 LTE] Désimlocker son Samsung Galaxy S3 LTE i9305
1. Start the phone WITHOUT SIM card
2. Open the phone application and enter the following code: * # 197328640 #
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
3. Then go in the following menus:
Main Menu [1] UMTS
[1] Debug Screen
[8] Phone Control
[6] Network Lock
Options [3] Personal SHA256 OFF
On this screen, do nothing. JUST WAIT ABOUT 30 SECONDS.
Then go back by pressing the Menu button (touch left of Home button) then select Back
you are in [6] Network Lock
then select [4] NW NV Lock Data INITIALLIZ
On this screen, do nothing. JUST WAIT ABOUT 1 MINUTE.
Then restart the phone.
4. Now your Galaxy i9305 LTE S3 must be unlocked. There is no confirmation message. The way to check is to insert a SIM card from another operator.
Click to expand...
Click to collapse
Anyway, you need a simlock ROMs for result. Some user of this thread had to flash their original operator ROMs to unlock.

Thanks guys
kanzi83 said:
Anyway, you need a simlock ROMs for result. Some user of this thread had to flash their original operator ROMs to unlock.
Click to expand...
Click to collapse
Thanks for the prompt replies guys. Very much appreciated. Not sure how I didn't find this previously as it seems like a key step in the process! I think I will need to flash the original ROM back as suggested by kanzi83 as I don't have that menu option 4. NW LOCK NV DATA INITIALLIZ. I only see the first three menu items. Wish I had backed it up before I installed the new ROM but I am downloading the original as we speak and will flash it and re-try this process. I'll update here if that works. Thanks again for your help.

I'm on bma6 4.1.2. There is no option (4) in the menu in 4.1.2 but it does not matter. Follow the same instruction to off the sha256, and back to network lock to check option (1). You will be able to see the sha256 enable flag = 0
Sent from my GT-I9305 using xda premium

Success
aero125 said:
I'm on bma6 4.1.2. There is no option (4) in the menu in 4.1.2 but it does not matter. Follow the same instruction to off the sha256, and back to network lock to check option (1). You will be able to see the sha256 enable flag = 0
Sent from my GT-I9305 using xda premium
Click to expand...
Click to collapse
Sadly I had already flashed back to the original ROM before reading this but I can report that flashing the original ROM did the trick and the menus appeared as described above and the process worked, my Vodafone SIM is now accepted by the phone (even with the Orange\EE ROM).
So a fantastic result many thanks all for the help. I am left with a curiosity question so no obligation to answer but - is that procedure all I ever needed to do to allow my phone to accept any SIM? - OR would it not have worked if I hadn't rooted it first? It's just it seems so straightforward and I always see people on the forums asking for 'unlock codes' etc and there seems a lively business in selling these codes online but if all that is required is following the above process to accomplish the same thing why would anyone pay for a code?
And a parting shot - Respect to the XDA community, seems like a committed and smart bunch of people putting their skills out their to help us all, without the preaching or patronising you see on other sites.

Yw :good:

I think this procedure only works on the S3. I came from a Sony Xperia phone, and there was no way we could unlock the phone =\
At least not yet.

Hi,
This works on S3 4G and Note 2
No idea for other device...

Related

Any ROM over 2.2 (froyo) wont detect SIM?

Im fine using 2.1 eclair and i get the standard NO SIM icon in notification bar when theres no sim and then when i insert sim i get signal as usual. However whenever i flash a ROM that updates android to 2.2 above (also tested 2.3) instead of getting the NO SIM icon i just get a NO SIGNAL cirlce with line through side, even when sim is inserted.
I am not on AT&T, the phone is unlocked to work in my country. The frequency my network operates at is 850/2100 but that shouldnt matter, it should still say NO SIM instead of NO SIGNAL.
Any help?
Thanks
What roms are you flashing? Not to sure about what to do in your situation but flash a i9000 rom like Apex and try that. What's good in the i9000 roms is you can modify the bands using *#2263# That might help your situation.
nh5 said:
What roms are you flashing? Not to sure about what to do in your situation but flash a i9000 rom like Apex and try that. What's good in the i9000 roms is you can modify the bands using *#2263# That might help your situation.
Click to expand...
Click to collapse
i used the roms here http://forum.xda-developers.com/showthread.php?t=1300843 and also a couple other, but only 2.1 will let me use the network. There hasnt been any other people having troubles with those roms so im a bit confused.
Do you have a link to that rom? Is there any major bugs with it?
Thanks for the reply
i flashed apex correctly but still have the no signal problem. anyone else have suggestions?
Maybe theres system files that dont get changed by roms that are only configured to work with 2.1? I have no clue :/
i went to the phone service menu (#*#*4636*#*#) and a few things i want to mention are...
Signal strength: 0 dBm 0 asu
GSM servie: emergency calls only
GPRS service: disconnected
Network type: Unknown
GSM disconnects:
========DATA========
StateDcinactive state
disconnected with last try at 6:59PM
fail because no error
========DATA========
StateDcinactive state
disconnected with last try at 6:59PM
fail because no error
========DATA========
StateDcinactive state
disconnected with last try at 6:59PM
fail because no error
There is a thing down the bottom called "set preferred network type". its currently at unknown, but there is the option of WCDMA (my network). How do i change to WCDMA, everytime i select something, as soon as i close the service menu it resets to unknown.
There is also a field called SMSC with an empty value.
I hope this info helps, surely someone can help me!
I really am no expert on this but if I were you this is what I would do.
I would start by taking my phone and doing a backup of my apps/contacts/ whatever else I had to have including the system files you need. Do this with Titanium Backup. Back this backup up on your PC or on your external SD. Then I would flash back to 2.1 eclair using odin. After that, I would master clear my phone using odin one click. This should reset your phone as if it were brand new out of the box. After that I would go through the whole root/flash rom process as if I were doing it for the first time. If it still doesnt work then you probably have an issue with that phone and I would try to return it.
Or you can wait for someone with more knowledge and time to troubleshoot this.
Ok, i just did the following and the problem is persisting.
- Flash rom back to stock 2.1
- Master clear
- Flash to 2.3.5
- Flash 2.3.5 kernal
problem still there. I see well over 140 views on this, could someone please look above at what im doing and advise me if i need to change something.
thanks
Did you take the sim and sd card (if u have one) out before flashing with odin?
fuloplori said:
Did you take the sim and sd card (if u have one) out before flashing with odin?
Click to expand...
Click to collapse
Yes both were out for the flashing process and we're only inserted once phone fully booted.
you are rebooting once inserting the sim right?
might want to select the 850 band only...
It's not a good idea to remove/insert Sim with phone powered on. It can damage the card.
studacris said:
you are rebooting once inserting the sim right?
might want to select the 850 band only...
Click to expand...
Click to collapse
Yes I am rebooting. How would i go about selecting that band? The every single service menu i've tried have all the bands deleted. I.e there's nothing there.
mrhaley30705 said:
It's not a good idea to remove/insert Sim with phone powered on. It can damage the card.
Click to expand...
Click to collapse
Once the phone is fully booted I power down, take battery out and insert sim, once powered on the phone doesn't even try to detect it. If i go into mobile networks in settings it says no sim inserted. :/
Thanks
contact the maker of those one clicks, the CSC may not have flashed correctly.or try someone elses gingerbread flash.
i have been JUST talking with the author of the THREAD you linked to, i am creating all one-click packages for rogers ATM
EDIT:======================================
you ARNT att..... thats your problem. those one clicks WILL flash ATT Carrier information, you need a multi CSC..... contact oneclick maker. or use NON odin flashes that dont contain CSC.
Im 80% sure im on the right track for your problem.
but why are you flashing ATT stocks if you arent ATT? those arent custom "ROMs" those are stock factory flashes for un-screwing up your phone.
TRusselo said:
contact the maker of those one clicks, the CSC may not have flashed correctly.or try someone elses gingerbread flash.
i have been JUST talking with the author of the THREAD you linked to, i am creating all one-click packages for rogers ATM
Click to expand...
Click to collapse
Any links to reliable reliable one clicks or any roms in general you think i should try?
read the edit above
TRusselo said:
contact the maker of those one clicks, the CSC may not have flashed correctly.or try someone elses gingerbread flash.
i have been JUST talking with the author of the THREAD you linked to, i am creating all one-click packages for rogers ATM
EDIT:======================================
you ARNT att..... thats your problem. those one clicks WILL flash ATT Carrier information, you need a mult
i CSC..... contact oneclick maker. or use NON odin flashes that dont contain CSC.
Im 80% sure im on the right track for your problem.
but why are you flashing ATT stocks if you arent ATT? those arent custom "ROMs" those are stock factory flashes for un-screwing up your phone.
Click to expand...
Click to collapse
Ok that sounds right, to not sure why i get network access normally on att stock 2.1lol. he I will contact flash makers but in the mean time where would i find non odin flashes that contain multi CSC?
Thanks
I have flashed two roms since my last post. One is a simple custom rom flashed via Clockwork recovery, and the other just a PDA (no csc) via odin. Both of which do not fix the problem :/
If it helps i can provide images of the problem?
i still have the problem and 2.1 is very irritating. Does ANYONE have a clue as to whats causing this?
- Doc
Here are images as promised:
All images are of the phone with the sim card inserted except for the 3rd image which states there is no sim card inserted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.1 with sim card
2.1 without sim card
2.3.5 WITH sim card
2.1 service menu (*#2263#)
2.3.5 service menu (*#2263#)
2.1 messaging options
2.3.5 messaging options are same as above but without messaging center
2.1 recovery menu
2.3.5 recovery menu - didnt get picture, but is standard CWM menu
2.1 about phone
2.3.5 about phone
2.1 APN settings
2.3.5 when trying to access APN settings
So some things to point out are:
1. 2.3.5 does not recognize i have inserted the sim card
2. 2.1 recognizes the sim card
All other problems are linked around those two points. Hope that helps, and hopefully someone can help me resolve this!
Thanks
Doc

[Q] GSM modems/ROMs

Does anyone have links to GSM modems for 2.2 or above roms? All i can find is WCDMA modems. I think this will resolve my problem ive been having for months, which is that all roms/modems here dont allow sim cards. So if anyone has links to GSM modems it will be much appreciated
My carrier uses a UMTS mobile network on 850/2100mhz frequency's, so a modem that supports that is required
Thanks
Doc
wtf are you talking about?
this phone IS a gsm phone.
the only way to get data/voice on this phone is WITH a sim card, so what are you talking about that every rom/modem doesnt allow sim cards?
do you have ANY idea what you are on about?
Pirateghost said:
wtf are you talking about?
this phone IS a gsm phone.
the only way to get data/voice on this phone is WITH a sim card, so what are you talking about that every rom/modem doesnt allow sim cards?
do you have ANY idea what you are on about?
Click to expand...
Click to collapse
Any rom I flash my phone with I can't use a sim card after that. The phone just says no service and ALL Roms end up deleting the service menu and it doesn't detect sim card. Read my other post in Q&A forum to know what I'm talking about
You might wan't to check your APN setting. There are a good bit of modems some work better than others in different locations.
So you had a thread open regarding the exact same problem, yet you thought it was a genius idea to open a new one?
Sent from my HTC PH39100
Who is your carrier? You haven't stated it in this thread nor the other from what I read. All I gathered was that you are not i897, and have been flashing i897 roms.
Like stated above your APN settings are probably incorrect for your carrier from the repeated flashings.
If that is not the problem and you know to remove sim card while flashing and also unplug the usb during reboot then you can scratch those off the list aswell.
I'm not certain, hopefully someone with more knowledge could chime in, but is it possible from flashing the At&t carrier roms the phone got locked to At&t, thus not recognizing the unknown carrier's sim card? Try network unlocking the device?
Also, you should probably go back and reread you're other thread, I believe there are very good explainations, judging by your replies, that you just disreguarded.
edit for good measure: you are installing the sim card while the phone is off correct? you can't just take off the battery cover and put it in whenever you like.
98XJ said:
Who is your carrier? You haven't stated it in this thread nor the other from what I read. All I gathered was that you are not i897, and have been flashing i897 roms.
Like stated above your APN settings are probably incorrect for your carrier from the repeated flashings.
If that is not the problem and you know to remove sim card while flashing and also unplug the usb during reboot then you can scratch those off the list aswell.
I'm not certain, hopefully someone with more knowledge could chime in, but is it possible from flashing the At&t carrier roms the phone got locked to At&t, thus not recognizing the unknown carrier's sim card? Try network unlocking the device?
Also, you should probably go back and reread you're other thread, I believe there are very good explainations, judging by your replies, that you just disreguarded.
edit for good measure: you are installing the sim card while the phone is off correct? you can't just take off the battery cover and put it in whenever you like.
Click to expand...
Click to collapse
I'm doing everything right, and as i said before it does work fine with my carrier (Telecom New Zealand) on android 2.1. I've tried every solution i can think of to fix this, but none have worked. I even tried backing up my working csc files then re-flashing after a new rom but that didnt work either. The phone basically doesnt register that it needs a sim card once it has been flashed. I get the blue circle with the line through it to indicate there's no signal (this happens with or without the sim being in). I am sort of a newbie when it comes to ins and outs of android but i thought it would be worth checking it out if its a modem issuse. Obviously by some of the replies i've got im wrong.
Do you have any other suggestions?
Edit: another thing to add is when i use the caller to open the debug menu (*# something #* ) where it usually has all details about the bands its connected to and batter information etc its completely blank (usually full on 2.1, but blank on 2.2+)
- Doc
You tried *#2263# ?
Walkthrough:
Settings>wireless and networks>mobile networks>network operator- choose your network<<access point name>(press selected network operator)confirm settings with known provider settings[requires you to search your providers settings] apply. Reboot. Confirm or deny.
98XJ said:
You tried *#2263# ?
Walkthrough:
Settings>wireless and networks>mobile networks>network operator- choose your network<<access point name>(press selected network operator)confirm settings with known provider settings[requires you to search your providers settings] apply. Reboot. Confirm or deny.
Click to expand...
Click to collapse
*#2263# is the number. At the moment on working 2.1 rom i get:
=BAND SELECTION=
[1] AUTOMATIC [*]
[2] WCDMA BAND []
[3] GSM BAND[]
[4] COMBU BANDS []
I will flash when i get back form holiday, at the moment i am running the stock 2.1 rom fine on my network. From what i remember once its flashed with or without a sim card it wont let me access the network settings, giving me a message like 'network not avaliable' or 'unable to register on network', thats why i cannot access APN settings.
I'll take screenshots and post them around the 28th? Then you can see what i mean.
Thanks,
Doc
Sounds good. In the mean time, under access point names did you try pressing menu key then press add new apn? Not sure if we covered this already.
Sent from my SAMSUNG-SGH-I897 using XDA App
98XJ said:
Sounds good. In the mean time, under access point names did you try pressing menu key then press add new apn? Not sure if we covered this already.
Sent from my SAMSUNG-SGH-I897 using XDA App
Click to expand...
Click to collapse
I'll get back to you tomorrow/dayafter on that, will flash hopefully tomorrow then get all info to post here.
Cheers
If the APN setings are locked out use a utility like Tweakker or Apn Global. These programs will bypass the locked out settings and automatically set up APN MMS for your countries telecom. Download from the market by reverting to working rom or using sideloading wonder machine thru your computer.
Here are images as promised:
All images are of the phone with the sim card inserted except for the 3rd image which states there is no sim card inserted.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2.1 with sim card
2.1 without sim card
2.3.5 WITH sim card
2.1 service menu (*#2263#)
2.3.5 service menu (*#2263#)
2.1 messaging options
2.3.5 messaging options are same as above but without messaging center
2.1 recovery menu
2.3.5 recovery menu - didnt get picture, but is standard CWM menu
2.1 about phone
2.3.5 about phone
2.1 APN settings
2.3.5 when trying to access APN settings
And to mikegy2002 heres what happened when i tried Tweakker on 2.3.5
So some things to point out are:
1. 2.3.5 does not recognize i have inserted the sim card
2. 2.1 recognizes the sim card
All other problems are linked around those two points. Hope that helps, and hopefully someone can help me resolve this!
I'll be posting all the images to the other thread about this problem.
Thanks
Doc
It appears for your carrier you are missing an access point.
http://m.geekzone.co.nz/Forums/39/Topic/32983
you are unable to press menu in apn's and add new apn?
98XJ said:
It appears for your carrier you are missing an access point.
http://m.geekzone.co.nz/Forums/39/Topic/32983
you are unable to press menu in apn's and add new apn?
Click to expand...
Click to collapse
I cant do that, when i try access network settings it asks me to insert a sim card
I had a similar problem. My phone fail to recognize the sim card a few times when the cover was off. My working theory was that the cover helped to "seat" the sim card.
Hope this helps.

[Q] Unable to register phone to the Telus network. How do I fix the problem?

Hi,
I recently purchased a brand new Telus HTC One off someone on Kijiji, and today I tried to activate the SIM card and register it on the Telus network. In hindsight, I should have activated the phone first with the stock ROM, but I didn't want to activate it before I got my case which took a couple of weeks to arrive. During that time I experimented with a few different ROMs, but failed to make a backup of my original stock ROM.
Thinking the SIM card was bad, I purchased another new one today, but I'm still receiving the same results.
Every time I try to register the phone to the network with the new SIM card, I receive the following error messages.
Phone Information > Turn off radio > press the option twice
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Settings > Mobile Network Settings > Network Operators > Search Networks
Settings > Mobile Network Settings > Network Operators > Select Automatically
Does anyone know how to get around this issue?
Does anyone have a backup of the stock Telus ROM and recovery image they'd be willing to share, so I can restore back to the original state?
Please let me know.
TIA,
WG
weirdg said:
Hi,
I recently purchased a brand new Telus HTC One off someone on Kijiji, and today I tried to activate the SIM card and register it on the Telus network. In hindsight, I should have activated the phone first with the stock ROM, but I didn't want to activate it before I got my case which took a couple of weeks to arrive. During that time I experimented with a few different ROMs, but failed to make a backup of my original stock ROM.
Thinking the SIM card was bad, I purchased another new one today, but I'm still receiving the same results.
Every time I try to register the phone to the network with the new SIM card, I receive the following error messages.
Phone Information > Turn off radio > press the option twice
Settings > Mobile Network Settings > Network Operators > Search Networks
Settings > Mobile Network Settings > Network Operators > Select Automatically
Does anyone know how to get around this issue?
Does anyone have a backup of the stock Telus ROM and recovery image they'd be willing to share, so I can restore back to the original state?
Please let me know.
TIA,
WG
Click to expand...
Click to collapse
This is the stock OTA zip. Flash this, remove sim, reinsert sim, reboot phone and APN settings should automatically set.
How do you know the phone hasn't been blocked from the network (reported as stolen)?
kibmikey1 said:
This is the stock OTA zip. Flash this, remove sim, reinsert sim, reboot phone and APN settings should automatically set.
Click to expand...
Click to collapse
How long does the flashing process take? I'm in TWRP and it's been sitting on
Running bug_fix1 tool
Click to expand...
Click to collapse
for a few minutes now.
WG
Matt said:
How do you know the phone hasn't been blocked from the network (reported as stolen)?
Click to expand...
Click to collapse
I'm starting to wonder that now. I flashed the firmware from the Telus OTA file, and I'm still getting the error. As a last ditch effort, I tried to unlock the phone. The phone unlocked, but I still can't connect to the Telus network. I've done everything I can think of, and now I'm ready to throw in the towel.
If Telus did blacklist the IMEI number, that just means it won't work on Telus right? In theory, it should still work on any other non-Telus supported carrier, correct?
I'm not sure about there, but here the blacklist is shared across all carriers, so it is blocked from all

[Q] Baseband problems on Z3C

Hi there,
I have some serious baseband problems. Don't know if it's bootloader unlock related, because this was the first thing I did with my telephone.
I tried to relock my bootloader, but the problems don't go away. My phone originally ran on a Greece unbranded firmware. My network operator is Vodafone NL. I run version 23.0.1. A.5.77.
Once my connection is unstable, my Z3C sometimes 'forgets' the baseband settings and sets the network type to 'unknown'. I lose mobile data. However, I can still make calls. I can change it back to USA Baseband (I live in Europe) with *#*#4636#*#* --> Information --> select baseband --> 'USA Band'. After that I'm unable to make calls, but mobile data works fine again.
Have to remark that I unlocked my phone BEFORE there was a known backup method of DRM keys, so they're lost forever. I'm trying to find out if my problems are related to this. So far I ruled out:
- Recovery
- Rooted yes/no
- Unlocked/Relocked bootloader
- Different baseband versions
My only solution is to go home, reinstall baseband and all works fine again, till my phone decides to drop signal again. It's starting to drive me nuts. Any advice? And why can I only select 'USA Baseband' from the service menu?
sander151187 said:
Have to remark that I unlocked my phone BEFORE there was a known backup method of DRM keys, so they're lost forever. I'm trying to find out if my problems are related to this.
Click to expand...
Click to collapse
NO it's not related to DRM keys.
I unlocked before the exploit as well and no issues so far :good:
My question is: why are you using a USA rom if you are unlocked?
Flash an european one and root it via recovery (by flashing the supersu zip).
To get the recovery you can install Androplus kernel or dualrecoverykernel by NUT.
I do not run an USA rom. That's my whole point. I run a Greek rom, because that was my original rom.
I still can't get it to work properly with custom kernels. It doesn't matter which I choose, mobile data drops permanently after some time (deep sleep) and I can only fix it if I refresh my baseband, because there is no option in the service menu to reset to European baseband, only to USA baseband, which will Break the call function
sander151187 said:
I do not run an USA rom. That's my whole point. I run a Greek rom, because that was my original rom.
I still can't get it to work properly with custom kernels. It doesn't matter which I choose, mobile data drops permanently after some time (deep sleep) and I can only fix it if I refresh my baseband, because there is no option in the service menu to reset to European baseband, only to USA baseband, which will Break the call function
Click to expand...
Click to collapse
Ok, sorry for the misunderstanding then
It seems a hardware problem :crying:
Sorry for the stupid question: have you ever tried another SIM from another carrier network?
EDIT: wait, I see your operator is Vodafone NL... do you know that for your network (and some other Vodafone network) a .79 version had been released on December, 22th?
Maybe that's the point!
Here's a screenshot of Xperifirm:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
istux said:
Ok, sorry for the misunderstanding then
It seems a hardware problem :crying:
Sorry for the stupid question: have you ever tried another SIM from another carrier network?
EDIT: wait, I see your operator is Vodafone NL... do you know that for your network (and some other Vodafone network) a .79 version had been released on December, 22th?
Maybe that's the point!
Here's a screenshot of Xperifirm:
Click to expand...
Click to collapse
Thanks for the help. I am aware of that, but only tried to flash the baseband of that version. Will try to make a flashable prerooted rom and will report if it works. It is quite hard to test, because it only seems to lose baseband if I move a few miles physically.
I don't own another sim and I currently know nobody who also owns a phone with a nano sim, but I will try that as soon as I can. On that note I have to remark that I cutted my micro sim to a nano sim size. Could be related to that.. Just trying to narrow it down for me and future users who also experience this problem..
sander151187 said:
Thanks for the help. I am aware of that, but only tried to flash the baseband of that version. Will try to make a flashable prerooted rom and will report if it works. It is quite hard to test, because it only seems to lose baseband if I move a few miles physically.
I don't own another sim and I currently know nobody who also owns a phone with a nano sim, but I will try that as soon as I can. On that note I have to remark that I cutted my micro sim to a nano sim size. Could be related to that.. Just trying to narrow it down for me and future users who also experience this problem..
Click to expand...
Click to collapse
Cutting a sim from micro format to a nano is never easy like from normal to micro, because the chip is just beneath the metallic contacts.
Yes it could be the reason of network issues.
I would extract the sd card too, as sometimes it can give odd behaviours.
By the way, I would exclude anything related to unlocking the bootloader and losing the drm keys.
And yes, I would begin with flashing a whole vodafone NL stock rom.
Try and keep us informed.
istux said:
Cutting a sim from micro format to a nano is never easy like from normal to micro, because the chip is just beneath the metallic contacts.
Yes it could be the reason of network issues.
I would extract the sd card too, as sometimes it can give odd behaviours.
By the way, I would exclude anything related to unlocking the bootloader and losing the drm keys.
And yes, I would begin with flashing a whole vodafone NL stock rom.
Try and keep us informed.
Click to expand...
Click to collapse
Tried, but failed. Back to my old ROM. I'm running out of possible solutions.
EDIT: I pulled out my SD-card and turned off WiFi on location and so far (24hrs) I'm still good. I might be related with that.
EDIT 2: Problem was not SD-card/WiFi/SIM related. So far I narrowed it down to my phone not being able to pick up a proper WCDMA (3G) connection. Because of that it refuses to switch back to 4G mode and shows Network type: unknown. Haven't found a real solution apart from *#*#4636#*#* --> phone-info --> set network to CDMA/LTE auto (prl) and wait for the radio to reset and switch it back to GSM/LTE auto (prl)
I have similar issue with Sony Xperia Z3 Compact D5833 Indian Variant
Baseband and IMEI have become unknown
phone keeps on restarting in loop
after flashing with flash tool it starts but without Baseband and IMEI
SIM works on other phone but no SIM works on this phone
Tried multiple FTF from XperiFirm
How do I get it back to work?
EDIT
Next im going to try : https://forum.xda-developers.com/xperia-z/help/solved-help-xz-bricked-baseband-unknown-t2350795
please advise if i should try or is there a different way?

stock od2 domestic unlocked *MUST BE INTERNATIONAL UNLOCKED FIRST*SPH-L720 ONLY

TESTED ON SPH-L720 ONLY
put together other threads to get it all to work (im just simply putting together mixed guides i am not taking credit for their work)
1 flash odin stock OD2 tar http://www.mediafire.com/download/p3ipnwue2apz28b/SPR-L720VPUGOD2-20150612101411.zip
2 cf autoroot https://download.chainfire.eu/325/CF-Root/CF-Auto-Root/CF-Auto-Root-jfltespr-jfltespr-sphl720.zip
3 flash od2-ng2 modem http://forum.xda-developers.com/galaxy-s4-sprint/general/od2-domestic-unlock-t3116542
*unlock with GTv3.1.5.apk and GTUpdate2_v3.1.8.apk for international* ( i can not provide those files in a link because they are not mine search them on google)
*domestic*
Go to phone> dial *#0011# > Press menu>back>menu>key input> "Q" >menu>key input>"0000" wait a few second
Then go to UMTS >DEBUG SCREEN >PHONE CONTROL >NETWORK CONTROL >GCF >Select the top option [1] GSM/(E)GPRS/WCDMA GCF ON.
It will say "success".
Reboot via the phone’s power menu after.
All done you should now have fully working s4 on od2 bootloader and ng2 modem with domestic unlock
jellomonster54994 said:
TESTED ON SPH-L720 ONLY
put together other threads to get it all to work (im just simply putting together mixed guides i am not taking credit for their work)
1 flash odin stock OD2 tar http://www.mediafire.com/download/p3ipnwue2apz28b/SPR-L720VPUGOD2-20150612101411.zip
2 cf autoroot https://download.chainfire.eu/325/CF-Root/CF-Auto-Root/CF-Auto-Root-jfltespr-jfltespr-sphl720.zip
3 flash od2-ng2 modem http://forum.xda-developers.com/galaxy-s4-sprint/general/od2-domestic-unlock-t3116542
*unlock with GTv3.1.5.apk and GTUpdate2_v3.1.8.apk for international* ( i can not provide those files in a link because they are not mine search them on google)
*domestic*
Go to phone> dial *#0011# > Press menu>back>menu>key input> "Q" >menu>key input>"0000" wait a few second
Then go to UMTS >DEBUG SCREEN >PHONE CONTROL >NETWORK CONTROL >GCF >Select the top option [1] GSM/(E)GPRS/WCDMA GCF ON.
It will say "success".
Reboot via the phone’s power menu after.
All done you should now have fully working s4 on od2 bootloader and ng2 modem with domestic unlock
Click to expand...
Click to collapse
Hello I have a small question I have 4.4.2 version and sim unlocked so i can use any GSM and CDMA My question is: If I got the official version 5.0.1 Is SIM will be closed I will not use GSM in my city Thank you
If you upgrade to 5.0.1 you will lose the unlock at first ask you have to do is install the modem I left in the link and your unlock will return you don't have to input anything else since you already have domestic unlock
my SIM is global unlock
i mean i dont need domestic unlock
i need international unlock work after upgrade to 5.0.1
Not that much different from mine
awesome
First, thank you so much. I followed these directions carefully and successfully unlocked my sprint galaxy s4 sph-l720 (5.0.1) for use with a T-Mobile SIM card.
I had initially installed the StageFright vulnerability patch but after following these directions and flashing everything it keeps bugging me to install the patch again. Will I be able to install this without reversing the unlock?
Also, the phone seems to be unable to send or receive mms (pictures). Is there a solution for this?
I have not tried to install the patch myself
Those are untested waters so I would not be able to tell you if it would mess up the unlock
That would have to be tested firsthand you can always just redo the process if it does not work I have heard
jellomonster54994 said:
I have not tried to install the patch myself
Those are untested waters so I would not be able to tell you if it would mess up the unlock
That would have to be tested firsthand you can always just redo the process if it does not work I have heard
Click to expand...
Click to collapse
Any ideas about being unable to send or receive MMS? Do I need to flash T-Mobile version of the OS?
I am getting mms fine with AT&T please check your apns
jellomonster54994 said:
I am getting mms fine with AT&T please check your apns
Click to expand...
Click to collapse
So it seems to work when WiFi is off. Sending works perfect but when I receive it comes in as a group with me and the person sending the picture... odd but at least it works. I only have one APN that I copied from my other Galaxy device that I actually bought through T-Mobile.
I should also mention that I performed a step that wasn't listed. I went into my network options and set my preferred network to GSM.
Here are the values for the APN I added:
Name
T-Mobile US LTE
APN
fast*t-mobile*com (replace asterisk with period)
Proxy
Not set
Port
Not set
Username
Not set
Password
Not set
Server
Not set
MMSC
http:++mms*msg*eng*t-mobile*com+mms+wapenc (replace asterisk with period and + with / )
Multimedia message proxy
Not set
Multimedia message port
Not set
MCC
310
MNC
260
Authentication type
None
APN type
default,mms,supl
APN protocol
IPv6
APN roaming protocol
IPv4
Turn APN on/off
APN turned on.
Bearer
Unspecified
Mobile virtual network operator type
None
Mobile Virtual network operator value
Not set
I really like having this phone unlocked with 5.0.1 Lillipop but I only get 3G/H+. Is there any way to get 4G LTE? Does it matter? Are the speeds comparable?
As far as I know LTE is not compatible with our model on GSM I've looked for quite a while and came up with nothing
Thanx man
Every things work perficts
Welcome, don't thank me thank s4 devs on XDA the best community ever ......but please feel free to hit the thanks button for me xD
Anyone try this while still on muniz_ri's OD2 100% Stock Pre-Rooted Firmware (flashed via Odin) and still on mf9 bootloader? I'm currently on a custom OD2 stock rooted rom, OD2 modem, and mf9 bootloader, and would like to get on the official OD2 stock rooted rom with domestic unlocked while retaining mf9 bootloader. I haven't read anywhere that it wouldn't work (probably because nobody is still on mf9) but I'm willing to give this a shot tonight if anyone has thoughts on this?
Shouldn't be a problem, just start at step 2.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
jellomonster54994 said:
As far as I know LTE is not compatible with our model on GSM I've looked for quite a while and came up with nothing
Click to expand...
Click to collapse
It's not physically possible. The SPH-L720 only supports B25 for LTE which is only used by sprint it appears.

Categories

Resources