I had ICS 4.0.4 Rooted with Philz (http://forum.xda-developers.com/showthread.php?t=1877270) Kernel and CWMR.
Today I flashed SuperNexus - N7000 - BUILD 5 (http://forum.xda-developers.com/showthread.php?t=1915302) Later I booted recovery and noticed I have Lost Philz Touch Recovery. Tried to find Philz Kernel for JB which matches my Baseband Version XXLRB but could not find any. Any suggestions please?
Hi, Philz kernels are only for TouchWiz ROMs, such as stock sammy and the JB leaks, Supernexus is an AOSP based ROM and Philz hasn't got any kernels for them. There is no "need" to flash a new kernel.
XxPixX said:
Hi, Philz kernels are only for TouchWiz ROMs, such as stock sammy and the JB leaks, Supernexus is an AOSP based ROM and Philz hasn't got any kernels for them. There is no "need" to flash a new kernel.
Click to expand...
Click to collapse
Thank you. BTW ROM is awesome and working fine, phone life also sems betetr than JB leaked ROMS.
As This ROM already have CWMR of its own so I think I can live with it thanks again.
Related
hi there buddies, i am currently on RR v10 with hydracore kernel which is the new kernel which supports all roms, from tw to aosp. So my question is that previously if we wanna go from a tw rom like rr,criskelo,.etc. to a AOSP or CM rom, we should first go back to GB and flash from there:crying:. BUt since this rom supports AOSP/CM itself, so is it possible to simply flash a AOSP/CM rom directly from a stock/custom TW rom with Hydracore kernel?? thanks in advance :good:
Jey_lo said:
hi there buddies, i am currently on RR v10 with hydracore kernel which is the new kernel which supports all roms, from tw to aosp. So my question is that previously if we wanna go from a tw rom like rr,criskelo,.etc. to a AOSP or CM rom, we should first go back to GB and flash from there:crying:. BUt since this rom supports AOSP/CM itself, so is it possible to simply flash a AOSP/CM rom directly from a stock/custom TW rom with Hydracore kernel?? thanks in advance :good:
Click to expand...
Click to collapse
You might get your answer here. http://forum.xda-developers.com/showpost.php?p=30810194&postcount=1
Yes you can flash directly CM/ASOP ROM with hydracore kernel.
Can I flash Paranoid android V1.6ª with Hydracore v5.04OC kernel?? Is it safe?
I have been reading and Paranoid Android says it just have to flash it under GB kernel or Samsung based kernel. But I haven’t find if I can flash it over Hydra core kernel my rom is STOCK ICS 4.0.3 with hydracore kernel.
I´ll use odin to flash it is it safe??
Thanks for the help
Yes you Can the Hydra_core is a safe kernel
I don't think u can use Odin to flash custom roms. u have to flash from cwm recovery
So far which is best brickfree kernel for all latest JB custom ROM ?
superpaul91 said:
So far which is best brickfree kernel for all latest JB custom ROM ?
Click to expand...
Click to collapse
hyrdacore is, i used it on an aosp jb rom and it was fantastic, i also used it to do full wipe before i flashed another jb stock rom
+1 hydracore
darkelfa2 said:
hyrdacore is, i used it on an aosp jb rom and it was fantastic, i also used it to do full wipe before i flashed another jb stock rom
Click to expand...
Click to collapse
I try the v5.4 Hydra Core before but it wont boot for ParanoidAndroid that why i seeking other kernel which work for all latest JB rom
I used HydraCore 4.3b here and workd fine =)
superpaul91 said:
I try the v5.4 Hydra Core before but it wont boot for ParanoidAndroid that why i seeking other kernel which work for all latest JB rom
Click to expand...
Click to collapse
hydracore till 5.4 will not work for new jb roms. hydracore v6 beta will work
what about speedmod kernel ??? is it safe to flash in new jb rom's?
u can flash rom but cannot use it on the new rom
Kernels
Use Philz or Hydracore Kernel for flashing any custom ROMs.
if u want kernel for any aosp jb roms, then use Hydracore 6.x
if you are on JB leak for Note , its already having Philz Kernel for JB leak.
Hydocore rocks
Sent from the man in Your attic.....
Hi everyone.
I am on this:
Android version: 2.3.6
Baseband version: N7000XXLB2
Kernel version:[email protected] #2
Build number: CheckROM NoteHD V6
I don't know why but sometimes I (Vol Up+Home+Power) and is CWM 6 and sometimes CWM 5
I bought the phone a month ago it came with a 4.0 version (good one), I searched in here best ROMs (CheckROM came across) download it and now I have 2.3.6 version.
I have downloaded 4 different kinds of JB version from across the forums and none of them have work....
I am thinking I download from here http://forum.xda-developers.com/showthread.php?t=1901191 the wrong Kernel version... I download XXLSC-XJB (JB Leak) I don't know if I have to use this XXLSA-XJB (JB Leak), or XXLS7-XJB (JB Leak), or any other I just download the first one.
Can anybody help me on how to instal the JB version of Android with CWM...
Thanks
:laugh:
are you just installing JB kernels on a GB rom? The phone wont even bootup
You need to install JB rom for a JB kernel to work.
there are a lot of JB roms in the Android Development section. Download and install using CWM. Read the procedure in the ROM thread.
melvinelelefante2000 said:
Hi everyone.
I am on this:
Android version: 2.3.6
Baseband version: N7000XXLB2
Kernel version:[email protected] #2
Build number: CheckROM NoteHD V6
I don't know why but sometimes I (Vol Up+Home+Power) and is CWM 6 and sometimes CWM 5
I bought the phone a month ago it came with a 4.0 version (good one), I searched in here best ROMs (CheckROM came across) download it and now I have 2.3.6 version.
I have downloaded 4 different kinds of JB version from across the forums and none of them have work....
I am thinking I download from here http://forum.xda-developers.com/showthread.php?t=1901191 the wrong Kernel version... I download XXLSC-XJB (JB Leak) I don't know if I have to use this XXLSA-XJB (JB Leak), or XXLS7-XJB (JB Leak), or any other I just download the first one.
Can anybody help me on how to instal the JB version of Android with CWM...
Thanks
:laugh:
Click to expand...
Click to collapse
Flash PhilZ kernel (Philz Safe Kernel 3.73 for XXLSC )
http://forum.xda-developers.com/showthread.php?t=1901191
Reboot recovery in to PhilZ kernel then you can make a full wipe and flash the JB of your choice. I recommend Ultimate Rom.
http://forum.xda-developers.com/showthread.php?t=1970626
Cassie's xtraLIite v11.1 AROMA and v6 supercharger scripts and way you go + lots more but that will came for u whenu want...
Flash kernel,rebot into recovery,wipe all,flash rom,reboot (might be good to fix premission in advance)
You can search for ultimate jb rom. Also you need to install hydracore kernel. I was able to install it and it works like a charm.
Sent from my GT-N7000 using Tapatalk 2
First I would recommend flashing an official Samsung ICS ROM with Odin. Then flash a safe kernel with CWM (ex. Speedmod or Hydracore), also through Odin or Mobile Odin. Once with a safe kernel, reboot into recovery, wipe everything using my guide below, then flash the JB ROM of your choice (put it in your external SD card before). I recommend Ultimate JB XXLSC.
http://forum.xda-developers.com/showthread.php?t=2024481
Will it brick if i install ICS custom rom (RocketROM ICS v12) and at the moment i use JB custom rom (Slim ROM 4.2 OFFICIAL) ?
The phone is rooted of course
Thx
lakir said:
Will it brick if i install ICS custom rom (RocketROM ICS v12) and at the moment i use JB custom rom (Slim ROM 4.2 OFFICIAL) ?
The phone is rooted of course
Thx
Click to expand...
Click to collapse
As long as you are running a safe kernel you won't have issues. Make sure that you are in a safe kernel and do a clean install (full wipe)
That is the usual method, but also make sure that you read the rom download instructions just to make sure that you follow the correct instructions. Take into consieration that some AOSP roms fail when flashed from TW based CWM, so you need to flash an CM based kernel first..:good:
:good:
How can I know if I run a safe kernel?
which kernel do I exactly need for RocketROM ICS?
RR v12 runs on Notecore which is a safe kernel unless you have applied a different one