Database Develop

So, I'm new to Galaxy S. Need Help :)

Hi guys,
I own a Galaxy S i9000 mobile.
It's running on :
Android 2.3.3
Baseband : DXJV9
I have not rooted it or did anything till now.
I wanna flash ICS AOKP on my mobile..
I have tried using the search option but still im soo deserted.
Can you guys guide me on how to root,flash CWM recovery, and flash ICS please ?
and Does Galaxy S supports ROM Manager ? coz i've been using Galaxy Ace before and it didn't support it..
Thanks a lot

For Root read this.
http://forum.xda-developers.com/showthread.php?t=788108
You need to download file ending in JVP. Usually you want the one ending with last 3 digits of your baseband but as there is no JV9 JVP is close enough and is reported as working. Besides it does not really matter as you just need this for root.
Once you have root you can simply follow the guide in the AOKP thread...
http://forum.xda-developers.com/showthread.php?t=1524108
I know you have stated you want AOKP but if you want a bullet proof simple way to get this all done start with this thread for Team ICSSGS.
http://forum.xda-developers.com/showthread.php?t=1494493
I usually like to make sure I have all necessary files, roms & programmes before starting so if anything goes wrong I can get my phone working again. This tutorial will help you with that also.
After following all of this you should have a good understanding of what to do and then you can flash AOKP as their instructions are kind of limited.
Also when choosing an ICS Rom this is a great thread with regards to performance.
http://forum.xda-developers.com/showthread.php?t=1554621

AOKP is a wonderful choice.
But if I can give you an advice, wait for the next Milestone which is expected to be released over the next few days

scubadude said:
For Root read this.
http://forum.xda-developers.com/showthread.php?t=788108
You need to download file ending in JVP. Usually you want the one ending with last 3 digits of your baseband but as there is no JV9 JVP is close enough and is reported as working. Besides it does not really matter as you just need this for root.
Once you have root you can simply follow the guide in the AOKP thread...
http://forum.xda-developers.com/showthread.php?t=1524108
I know you have stated you want AOKP but if you want a bullet proof simple way to get this all done start with this thread for Team ICSSGS.
http://forum.xda-developers.com/showthread.php?t=1494493
I usually like to make sure I have all necessary files, roms & programmes before starting so if anything goes wrong I can get my phone working again. This tutorial will help you with that also.
After following all of this you should have a good understanding of what to do and then you can flash AOKP as their instructions are kind of limited.
Also when choosing an ICS Rom this is a great thread with regards to performance.
http://forum.xda-developers.com/showthread.php?t=1554621
Click to expand...
Click to collapse
Thanks for replying..
And where can i get the Odin and the .ops file for Galaxy S?
Thanks again

You must register to download anything.
http://www.sammobile.com/
This link has passwords & instructions for sammobile firmware downloads.
http://www.sammobile.com/firmware/?page=-1
Firmware link for Galaxy s i9000
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=-1#modelsa
Odin (choose i9000)
http://www.sammobile.com/firmware/?page=5&t=1&o=1#osa
flash guide if you want it (choose i9000)
http://www.sammobile.com/firmware/?page=6&t=1&o=1#osa

scubadude said:
You must register to download anything.
http://www.sammobile.com/
This link has passwords & instructions for sammobile firmware downloads.
http://www.sammobile.com/firmware/?page=-1
Firmware link for Galaxy s i9000
http://www.sammobile.com/firmware/?page=3&t=1&o=1&m=GT-I9000&r=-1#modelsa
Odin (choose i9000)
http://www.sammobile.com/firmware/?page=5&t=1&o=1#osa
flash guide if you want it (choose i9000)
http://www.sammobile.com/firmware/?page=6&t=1&o=1#osa
Click to expand...
Click to collapse
Thank you soo much for your help bro

That link for flashing Team ICSSGS has help for everything else. From downloading stock rom to flashing with Odin to flashing ics (in this case team icssgs)
You could potential substitute Team ICSSGS for AOKP.

I got another question..
does Semaphore ICS kernel works on my baseband (i.e - DXJV9) ?

Will do. My favourite.
Sent from my GT-I9000 using Tapatalk 2

scubadude said:
Will do. My favourite.
Sent from my GT-I9000 using Tapatalk 2
Click to expand...
Click to collapse
Great
and finally, Which version of the kernel should i use for official AOKP b34? 1.1.0 or 1.1.0s?

Not sure but both should work. 1.0.1s is for slim ics and other roms. If it is not compatible it will break 720 video recording & playback otherwise eveything else should work. There is also a video patch somewhere.
Sent from my GT-P7500 using Tapatalk 2

scubadude said:
Not sure but both should work. 1.0.1s is for slim ics and other roms. If it is not compatible it will break 720 video recording & playback otherwise eveything else should work. There is also a video patch somewhere.
Sent from my GT-P7500 using Tapatalk 2
Click to expand...
Click to collapse
Alright..I've flashed AOKP b34 and Semaphore 1.1.0s
Everything seems to be fine
But now my sdcard is mounted as internal storage and the actual internal storage is mounted as sdcard..is this a bug or what ?
Even when I connect my phone to my PC using USB,only the actual internal storage (which is mounted as SDcard shows up..

I personally haven't 1.1.0 only 1.0.1sbm with slim ics. I think the 1.1.0 is still a test version for cm9 but could be wrong. Things may have updated since i last looked but i recommend reading the semaphore thread and posting there for more help.
Sent from my GT-P7500 using Tapatalk 2

Hello another sg user
Sent from my GT-I9000 using xda premium

Suggest ICS rom for you
I would like to suggest ICS rom for you
http://forum.xda-developers.com/showthread.php?t=1560524&highlight=aroma
This is quite easily to install because it have menu interactive to do with and it quite smooth when use it.

http://hdtechvideo.com/community/index.php
go here
http://www.darkyrom.com/community/index.php?threads/discuss-custom-ics-roms-for-sgs1-here.7309/

Sys81 said:
Hello another sg user
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Hey!
TIGER 123 said:
http://hdtechvideo.com/community/index.php
go here
http://www.darkyrom.com/community/index.php?threads/discuss-custom-ics-roms-for-sgs1-here.7309/
Click to expand...
Click to collapse
frankind said:
I would like to suggest ICS rom for you
http://forum.xda-developers.com/showthread.php?t=1560524&highlight=aroma
This is quite easily to install because it have menu interactive to do with and it quite smooth when use it.
Click to expand...
Click to collapse
scubadude said:
I personally haven't 1.1.0 only 1.0.1sbm with slim ics. I think the 1.1.0 is still a test version for cm9 but could be wrong. Things may have updated since i last looked but i recommend reading the semaphore thread and posting there for more help.
Sent from my GT-P7500 using Tapatalk 2
Click to expand...
Click to collapse
Thanks for helping..
I switched to SlimICS and Semaphone 1.1.1 and it fixed it all..
and now the only problem I'am facing is that WiFi Tethering is not working..Is it just for me or it doesn't work for all of you people ?

Hameedhudeen said:
Hey!
Thanks for helping..
I switched to SlimICS and Semaphone 1.1.1 and it fixed it all..
and now the only problem I'am facing is that WiFi Tethering is not working..Is it just for me or it doesn't work for all of you people ?
Click to expand...
Click to collapse
Known bug in Semaphore. Make sure you enable the 'Netfilter' module in the app. When it randomly doesn't work, which is the bug, simply check and uncheck it 2 times and it will work.

Well it seems dat u gettin alot of hlp alrdy bt u need hlp like immediately u can pm me ur hp no.
Sent from my GT-I9000 using xda premium

upichie said:
Known bug in Semaphore. Make sure you enable the 'Netfilter' module in the app. When it randomly doesn't work, which is the bug, simply check and uncheck it 2 times and it will work.
Click to expand...
Click to collapse
That fixes it.
Thank you
Sys81 said:
Well it seems dat u gettin alot of hlp alrdy bt u need hlp like immediately u can pm me ur hp no.
Sent from my GT-I9000 using xda premium
Click to expand...
Click to collapse
Yea, I got a lots of help by this thread..
Thanks all!
Now, The only problem I'am experiencing is a little more battery drain when compared to GB.
I am gonna experiment with modems..

[ROM][9/19][GT-P3113 P3110][4.0.4] RomsWell_V1.1 Updated

RomsWell V 1.1
Base: IMM76D.P3113UEBLH2
This is a mostly stock version of the OTA. With a some of the more basic features added.
This will flash for both the GT-P3113 and the 3110
V.1.1 Change log
Updated Base to P3113UEBLH2 Latest ICS firmware
Added Extended power menu (Thanks Ruben00) Hes spent alot of time screwing with this make sure you find his thanks button somewhere.
Small Kernel Changes
De-Odex
Zip Align
Rooted
init.d Support
Custom Boot Animation(To Change) /system/media/bootanimation.zip
Thanks c_live_lee for the RomsWell boot animation
Adding apps before flashing
If you open the ROM.zip with 7zip or winrar you can drop apks in the data/app folder in the zip and it will auto install the apps on first boot.
To Be Done
Adding a Slim Version Later Today
You Tell Me?
Install Instructions
Flash thru Custom Recovery
Superuser is fixed in this build.
I recommend a full wipe Data/Cache/System. You dont have to but dont report issues unless you have done a full wipe including system....
If coming from CM you will need to do a full wipe including System before flashing.
Download Here V1.1
Download Here V1.0​

Reserved= Now for Kernel links

Mine too

Not possible to use this as an upgrade from your stock rooted?

AWESOME! Will be installing this ASAP. Thanks for your hard work man!

Gamer819 said:
Not possible to use this as an upgrade from your stock rooted?
Click to expand...
Click to collapse
You can. If you have issues full wipe and reflash.
jskolm said:
AWESOME! Will be installing this ASAP. Thanks for your hard work man!
Click to expand...
Click to collapse
Welcome

Kidney Poker said:
To Be Done
Extended Power Menu
Mass Storage
Click to expand...
Click to collapse
If you get mass storage, I'll love you forever.

Macadamia Daze said:
If you get mass storage, I'll love you forever.
Click to expand...
Click to collapse
Soon I hope.

DUDE!!!!! Badass boot animation! Installed right over the stock rooted rom and I be jammin' :good::good:

Some screenshot will be appreciated, i am running CM9 understand the flash method. But can you provide us with more info.
The rom sounds great but pictures please.

frank060272 said:
Some screenshot will be appreciated, i am running CM9 understand the flash method. But can you provide us with more info.
The rom sounds great but pictures please.
Click to expand...
Click to collapse
It's stock. No need for screen shots.

Kidney Poker said:
It's stock. No need for screen shots.
Click to expand...
Click to collapse
Okay awesome, with touchwiz and all the stock samsung apps. Sounds great is it as fast as CM9, then i will give it a go asap. :good:

frank060272 said:
Okay awesome, with touchwiz and all the stock samsung apps. Sounds great is it as fast as CM9, then i will give it a go asap. :good:
Click to expand...
Click to collapse
Super fast. I was excited to get poker's stock rooted but this is even better with his addons. Beauty of the stock with the speed and flexibility of a rooted custom.
Sent from my GT-P3113 using Tapatalk 2

Only one more question, because i am coming from a cm9 mod and the metalic a6 kernel.
Can i just flash the rom or do i have to flash the kernel first and the this awesome rom.
Offcourse after the wipe/cache/dalvik.
Can anyone please provide a how to.

frank060272 said:
Only one more question, because i am coming from a cm9 mod and the metalic a6 kernel.
Can i just flash the rom or do i have to flash the kernel first and the this awesome rom.
Offcourse after the wipe/cache/dalvik.
Can anyone please provide a how to.
Click to expand...
Click to collapse
Kernel is installed on first flash. If your coming from cm wipe system before flashing too.

Kidney Poker said:
Kernel is installed on first flash. If your coming from cm wipe system before flashing too.
Click to expand...
Click to collapse
Then this will be my new Rom when i get home from work, love the stock look, but hated the lag.
When this is as fast as they say, then i must have it.:good:
Thanks for the effort you guys put in the roms and that you take the time to answer our questions

Thanks a lot , you definitely help make this Tab awesome!
Sent from my AT&T Galaxy S2 running the CM10 Preview

I take it the ir blaster is working still? Its the only this keeping me from flashing another rom.
Sent from my GT-P3113 using xda app-developers app

KonnerTomlinson said:
Thanks a lot , you definitely help make this Tab awesome!
Sent from my AT&T Galaxy S2 running the CM10 Preview
Click to expand...
Click to collapse
Ty
hakkers420 said:
I take it the ir blaster is working still? Its the only this keeping me from flashing another rom.
Sent from my GT-P3113 using xda app-developers app
Click to expand...
Click to collapse
If it works on stock it should still work on this.

What is the different between 3113, 3110 and 3100? Will this rom work with 3100?

Really light rom with decent battery life (ics or jb)

Hi guys and girls!
Hope you are all doing well. Anyway, I rooted yesterday and am running a new kernel (speed mod k13 I believe) anyway. What I am after now, is as the title says, a light, fast rom with decent battery life. I was wondering if anyone had suggestions or experiences and could suggest something. Would a CYANOGEN from work? When I had my galaxy s I was using 7 and found it really good. But are there others?
Cheers!
Oliver
Sent from my GT-N7000 using xda app-developers app

cyanogen will indeed work as will paranoid android charack,s,rocket rom if its lite you want then look for a rom with aroma installer so you can install what you want

Cheers!, really liking the look of paranoid android, especially the hybrid roms! it has been a goood while since i flashed a rom, so need to figure out what i have to do again. lol, thanks, if you can provide any tips on moving to this rom from stock ics with speedmod kernel, it would be helpful! Thanks.

Is this a decent guide to follow for paranoid android?
http://www.theandroidsoul.com/get-jelly-bean-and-hybrid-ui-on-galaxy-note-with-paranoidandroid-v2-0/
Cheers.
Sent from my GT-N7000 using xda app-developers app

curlymanoliver said:
Is this a decent guide to follow for paranoid android?
http://www.theandroidsoul.com/get-jelly-bean-and-hybrid-ui-on-galaxy-note-with-paranoidandroid-v2-0/
Cheers.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
check this guide, its looks good for you.

So from this, ill just flash paranoid ratheer than than than the JB it suggests?

curlymanoliver said:
So from this, ill just flash paranoid ratheer than than than the JB it suggests?
Click to expand...
Click to collapse
Yes, JB referred in the guide are all JB/CM10 based roms.
Check this thread, some one just flashed JB rom using above guide

Thanks So Much, Very helpful so as long as i am on safe kernel i do not have to worry about being on a cm9 rom before i flash JB(cm10 based)?

curlymanoliver said:
Thanks So Much, Very helpful so as long as i am on safe kernel i do not have to worry about being on a cm9 rom before i flash JB(cm10 based)?
Click to expand...
Click to collapse
As long as you are on safe kernel you don't have to worry about anything or to revert back to GB. Just keep flashing rom with full wipes. Its enough for you.....

So, i am trying to back up through CWM on hydracore, it gets soooo close to the end and then says there was an error backing up the data, any ideas on what this is or a remedy for it?
I dont really want to flash a rom without doing the backup... even though in the past, i have done (old phone) is it imperritive to make a backup?

curlymanoliver said:
So, i am trying to back up through CWM on hydracore, it gets soooo close to the end and then says there was an error backing up the data, any ideas on what this is or a remedy for it?
I dont really want to flash a rom without doing the backup... even though in the past, i have done (old phone) is it imperritive to make a backup?
Click to expand...
Click to collapse
What exactly you want to backup from old rom, apps? If so then use titanium backup. I never backup whole rom as it hardly takes 15-20 minutes to setup rom if you have backup of apps.
Sent from my GT-N7000

Didnt bother with it in the end, thanks for he help though guys, got the latest version of PA running on it and its awesome, thanks agiain
Oliver

i think you lose s-note capability with paranoid android.
confirm any1 ?

bebseh said:
i think you lose s-note capability with paranoid android.
confirm any1 ?
Click to expand...
Click to collapse
Yes, as with any AOKP/ CM9 based rom..
There are alternative apps that could be used.
Otherwise, there are some excellent choices when it comes to Touchwiz-based roms as well.
Some are available themed to the AOKP look, if you prefer.

bebseh said:
i think you lose s-note capability with paranoid android.
confirm any1 ?
Click to expand...
Click to collapse
Gnote and papryus are the best alternatives.
Swyped From My Juicy Flavoured AOKP JB.

Aokp milstone 6 build 2:

Don't use this rom due to random bootloop .
Hi all here the latest aokp milestone rc2 based on the latest unoficial cm9 rom BY Erwin.P
It's aokp milestone 6. version 4.0.4
Enjoy the aokp rom
The defauct lanchet is nova i think is the fastest but you can always use apex lancher or other ics one.
Detail:
Ics interface.Cm9 theme chooser, aokp setting and more will come.
What need to be fix :
Aokp stock live wallaper .But it's all and all cm9 bug.
Download:
https://docs.google.com/open?id=0B-5I_FmNMNolX0JpdEVFX2NIZG8
WARNING:
Before to install you have to delete 77tweaks in System/etc /init d
Credit:
Erwin.p
Aokp developer for wildfire.
Cyanogenmod team

can't download

Hello Pator57,
First I want to express my intentions with this post: I'm VERY glad that you have started to work on these ROM ports, and I'm only willing to help ya so that you can contribute more and more for the wildfire.
For me, a ROM presenting shouldn't be done in this way. First , lets start with the thread name-you should specify what actually is in this thread, is it a port/mod/build-from-source/etc, not only 'aokp update' for example, you should specify a date/version of the specific ROM , so that the users can keep an eye on the ROM since its almost certain that it will have some bugs , that should be fixed in new versions.
Later, in the thread its good not only to explain how and what you did it, but to put screen-shots/videos. To give details about the features,the ROM base and from where did you ported it, about the performance and some glitches. Plus that don't forget to include some disclaimer, so that you are not taking any responsibility for bricked phones, earthquakes or anything else. There can always be someone to point at you and claim that you bricked his precious phone. Detailed credits are also good to write, but you have made it so its OK.
Moreover,the actual zip of the ROM. Its not cool to name it 'aokp.zip' or 'miuiv4.zip'. I again think that including date/version is good, because when you make 3-4 different zips with bug fixes for example, personally i love to store more than a one version of the ROM I use and with these names it wouldn't be practical.
Of course one can rename it himself , or try the ROM to find out whats in,but(I think) these small suggestion would make you look more professional and reliable, just the way a developer/porter should look. This will give me personally convince in you, and that the things you do wont harm my phone. I hope noone will feel offended in any way. My intention as I said is only to help you, so that we can have one more ROM "producer" here. All what I wrote are personal views on how the things are done around here, its your choice whether to follow them!

Vency77 said:
Hello Pator57,
First I want to express my intentions with this post: I'm VERY glad that you have started to work on these ROM ports, and I'm only willing to help ya so that you can contribute more and more for the wildfire.
For me, a ROM presenting shouldn't be done in this way. First , lets start with the thread name-you should specify what actually is in this thread, is it a port/mod/build-from-source/etc, not only 'aokp update' for example, you should specify a date/version of the specific ROM , so that the users can keep an eye on the ROM since its almost certain that it will have some bugs , that should be fixed in new versions.
Later, in the thread its good not only to explain how and what you did it, but to put screen-shots/videos. To give details about the features,the ROM base and from where did you ported it, about the performance and some glitches. Plus that don't forget to include some disclaimer, so that you are not taking any responsibility for bricked phones, earthquakes or anything else. There can always be someone to point at you and claim that you bricked his precious phone. Detailed credits are also good to write, but you have made it so its OK.
Moreover,the actual zip of the ROM. Its not cool to name it 'aokp.zip' or 'miuiv4.zip'. I again think that including date/version is good, because when you make 3-4 different zips with bug fixes for example, personally i love to store more than a one version of the ROM I use and with these names it wouldn't be practical.
Of course one can rename it himself , or try the ROM to find out whats in,but(I think) these small suggestion would make you look more professional and reliable, just the way a developer/porter should look. This will give me personally convince in you, and that the things you do wont harm my phone. I hope noone will feel offended in any way. My intention as I said is only to help you, so that we can have one more ROM "producer" here. All what I wrote are personal views on how the things are done around here, its your choice whether to follow them!
Click to expand...
Click to collapse
It's the same port as tamahal port but based on the latest cm9 09/20 rom.But exept that and some tweaks it's exactly the same rom.
Sent from my HTC Wildfire using xda premium

ROM dont work, enter pin code and always boot screen

Fulfen said:
ROM dont work, enter pin code and always boot screen
Click to expand...
Click to collapse
Ho too bad.Flash this fix and it should work now.

OT: dafuq, what is this updater-script for a simple build.prop replace

Vency77 said:
OT: dafuq, what is this updater-script for a simple build.prop replace
Click to expand...
Click to collapse
Yea i change it but before i have testing the rom without the build prop change and all was working well.So come back to the stock build prop of cm9.IF it still doesn't work i will try again a new port this week end

now just htc logo... so still fail

Strange it was working well for me..But do you make an factory reset, wipe data, wipe dalvik cache,wipe cache partition before flashing ?
Ok but if the rom still doesn't work i will deleted the thread.
Sent from my HTC Wildfire using xda premium

I'm going to backup my current CM9 setup and try this out? What device did you port from?
Sent from my Wildfire using Tapatalk 2

It's not an port it's an uptate of the other aokp rom by thathanmal66.
Sent from my HTC Wildfire using xda premium

im biting my tongue here lol
R.V.3 (MokeeOs)

Pator57 said:
Strange it was working well for me..But do you make an factory reset, wipe data, wipe dalvik cache,wipe cache partition before flashing ?
Ok but if the rom still doesn't work i will deleted the thread.
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
yes i have wildfire for 2 years i know how to flash rom, i did all those things.

Looks like i am having some great fun here
Sent from Hell!!

Pator57 said:
It's not an port it's an uptate of the other aokp rom by thathanmal66.
Sent from my HTC Wildfire using xda premium
Click to expand...
Click to collapse
I'm sure it shouldn't be called like this,because its a whole-ROM zip , and you tell that we should wipe everything when installing it,but whatever.Since its an 'update' of tathanhlam66's ROM , why do you make a whole new thread and not just continue what tathanhlam66 started ?
EDIT: Plus that , you have not edited both threads as I suggested you, which is making them BOTH look just funny. If you are not serious , and constantly state 'This is an update...blqblq', they will continue to look funny and futile!

and i hope you got permission to post and uptate his work?
R.V.3 (MokeeOs)

slymobi said:
and i hope you got permission to post and uptate his work?
R.V.3 (MokeeOs)
Click to expand...
Click to collapse
...and to play scrabble with his name

As on the MIUI thread, is it possible to provide some more details on that? Screenshots, bug list?
It's quite tricky to flash a ROM without knowing the results..

There are no bug but if im wrong tell me like my miui port.But it report to doesn't boot so i will try to make it boot next weekend.And i don't need to ask permision aokp it's like miui it's an open software and no need screenshoot the rom it's an ics rom but only with some aokp option tweaks
Sent from my HTC Wildfire using xda premium

Recommend me a rom

Hey all
since its all going so confusing on Dev forum that i cant keep up
i want a stable ( not laggy ) customizable battery efficient preferably ics or jb based ( i dont care about games bugs)just daily use and camera
im on zeus v7 but its giving me hardtime
and also if i wanted to try cm10 which one should i download since theres so many nightlies versions im confused?
thanks inadvance

test latest nightly
http://jenkins.cyanogenmod.com/job/android/10865/
but if you want performance, battery efficient, and all feature working, stick with zeus.
if you have problem with v7, try v6.4

Thanks dude but i dont think im qualified enough to test something new !is there any other tested version of cm 's?and i should download the zip file only..right ?

Mo Chedid said:
Thanks dude but i dont think im qualified enough to test something new !is there any other tested version of cm 's?and i should download the zip file only..right ?
Click to expand...
Click to collapse
The snapshot is pretty good. It shouldn't be so long until there is a very stable CM10 out.
Sent from my LG-P970

U can use CM10 M2 or Korean ICS V30J
Sent from my P-970 using xda app-developers app

@ xonar thx man and you mean the same link u sent me above ^ ?
_____
@ wessy thanks man but a direct link for the thread or rom would be appreciated since theres so many ?

Mo Chedid said:
@ xonar thx man and you mean the same link u sent me above ^ ?
_____
@ wessy thanks man but a direct link for the thread or rom would be appreciated since theres so many ?
Click to expand...
Click to collapse
Korean ICS is on page 45: http://forum.xda-developers.com/showthread.php?t=1909785
M2 is on get.cm
Sent from my P-970 using xda app-developers app

i recommend you, boypes rom with huexxx moded kernel
rom: http://www.mediafire.com/?w5hqirlj65g6zte
kernel: http://forum.xda-developers.com/attachment.php?attachmentid=967297&d=1332815031

agritux said:
i recommend you, boypes rom with huexxx moded kernel
rom: http://www.mediafire.com/?w5hqirlj65g6zte
kernel: http://forum.xda-developers.com/attachment.php?attachmentid=967297&d=1332815031
Click to expand...
Click to collapse
Is boypes rom stable with huexxx moded kernel? I've tried boype's rom before but I had some SoDs

agritux said:
i recommend you, boypes rom with huexxx moded kernel
rom: http://www.mediafire.com/?w5hqirlj65g6zte
kernel: http://forum.xda-developers.com/attachment.php?attachmentid=967297&d=1332815031
Click to expand...
Click to collapse
Strans said:
Is boypes rom stable with huexxx moded kernel? I've tried boype's rom before but I had some SoDs
Click to expand...
Click to collapse
Thx agritux that could be exactly what I need. Like Strans installed boype's ROM, first SoD after like 20h, took 4 pictures, next Sod after 5h. OK video playback was loosing some frames and I really needed a working phone the next day so sorry but back to my Zeus 6.4.

Thx all
i have tried boype's earlier too had many sod's and im not sure how to flash kernel with rom so i guess ill just start with CM10 M2
___
theres one more thing is there any other way than Titanium app to backup apps?or i have to backup with titanium and install all 50-60 apps one by one?!

Mo Chedid said:
Thx all
i have tried boype's earlier too had many sod's and im not sure how to flash kernel with rom so i guess ill just start with CM10 M2
___
theres one more thing is there any other way than Titanium app to backup apps?or i have to backup with titanium and install all 50-60 apps one by one?!
Click to expand...
Click to collapse
Titanium backup has batch backup/restore option.
Sent from my LG-P970

xonar_ said:
Titanium backup has batch backup/restore option.
Sent from my LG-P970
Click to expand...
Click to collapse
if i got you right i think this's what i do..i backup them then restore them after flashing but if i have like 50 apps i have to press accept & install every app alone and if any call interrupted i have to do it again
sorry for bothering with many Q's

Mo Chedid said:
if i got you right i think this's what i do..i backup them then restore them after flashing but if i have like 50 apps i have to press accept & install every app alone and if any call interrupted i have to do it again
sorry for bothering with many Q's
Click to expand...
Click to collapse
Ever thought of buying the pro version? It can do it in 1 click at least it says so
Sent from my LG-P970 using xda app-developers app

no but you made me thought of downloading the patch for titanium backup and get the pro version
Done and see if it works.
thanks

Ok this's confusing..i just flashed CM10 M2 and cant find Play market to install titanium or any apps :S

Mo Chedid said:
Ok this's confusing..i just flashed CM10 M2 and cant find Play market to install titanium or any apps :S
Click to expand...
Click to collapse
Pretty sure you have to install gapps.

SaschaKH said:
Thx agritux that could be exactly what I need. Like Strans installed boype's ROM, first SoD after like 20h, took 4 pictures, next Sod after 5h. OK video playback was loosing some frames and I really needed a working phone the next day so sorry but back to my Zeus 6.4.
Click to expand...
Click to collapse
het bro do you have sods when downloading data via WiFi on Zeus 6.4? I mean when phone stats stuck and refuses to wake up?

i installed tantrums GAPPS 0.511 but when i press power button theres no RECOVERY option to choose that i can " install from zip card " thing
and aside of all that..what if i wanna reflash another rom how im supposed to get in Recovery mood?
Edit: nvm i found it sub menu after reboot thing ; )

obiwannn said:
het bro do you have sods when downloading data via WiFi on Zeus 6.4? I mean when phone stats stuck and refuses to wake up?
Click to expand...
Click to collapse
Never had a SoD with Zeus 6.4. BTW installed Diana Kernel 2.33 now anyway even if I'm probably not the best tester.
Sent from my LG-P970 using xda app-developers app