Related
hi there,
first off, im sorry for being a total noob.
i was trying to look for a full guide to install Criskelo ICS ROM v2.
i found an online guide from the site rootgalaxynote dot com
but its for the older version.
i was wondering if i can do this step but install using the V2 or follow the steps, install the older version then use clockworksmod to load v2?
once again, please accept my apologies as i have never touched an android in my life.. im so new, my note is still in the mail and i havent even received it yet.
Go the the development section find criskelo v2 and follow the instructions in the first post? Why go to another site when the instructions are right here
.....
Sent from my GT-N7000 using Tapatalk 2
hi there,
i was there, the thing is that i want to make sure i understand the instructions the instructions
From GB:
Install ics repack by chainfire via mobile odin-reboot-reboot into revovery-full wipe-install criskelo ics.
Click to expand...
Click to collapse
so before i run the steps above, i should install clockworkmods and titanium backup to backup my current rom and apps rite?
then i download the ics repack by chainfire and the criskelo v2 mod
then install mobile odin and install the mod?
Very simple as ABC.
First you use PC odin and flash a single file called chain fire repack.tar
This ROM is already rooted.
Boot up and install triangleaway1.25.apk
Copy your ROM to SDcard
Reboot to recovery using the CWM app in Your note
Wipe data.factory reset wipe the other one below the list. I forgotten the name
Wipe devalik cache from advance settings
Install the zip file called Criskelo or any other ROM from Sdcard.
Once you are done reboot and enjoy your new rom.
Sent from my GT-N7000 using XDA
gtee said:
Very simple as ABC.
First you use PC odin and flash a single file called chain fire repack.tar
This ROM is already rooted.
Boot up and install triangleaway1.25.apk
Copy your ROM to SDcard
Reboot to recovery using the CWM app in Your note
Wipe data.factory reset wipe the other one below the list. I forgotten the name
Wipe develik cache from advance settings
Install the zip file called Criskelo ROM from Sdcard.
Once you are done reboot and enjoy your new rom.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
GREAT!! thats the best information i've got so far... thank you kindly....
i really appreciate it...
one more question, by following the instructions above, will the phone be overclockable? (just wondering.. doesnt matter if it doesnt..)
vyraz said:
GREAT!! thats the best information i've got so far... thank you kindly....
i really appreciate it...
one more question, by following the instructions above, will the phone be overclockable? (just wondering.. doesnt matter if it doesnt..)
Click to expand...
Click to collapse
No, you can't overclock any of the ICS kernels for the time being.
chasmodo said:
No, you can't overclock any of the ICS kernels for the time being.
Click to expand...
Click to collapse
i see.. ok.. no prob.. dont really need that much juice anyway.. for now that is...
do you guys recomend i root my GB in stock condition then backup with CWM first? just so i can revert much later on in case bad stuff happens?
always make a backup incase of anything going wrong
gtee said:
Very simple as ABC.
First you use PC odin and flash a single file called chain fire repack.tar
This ROM is already rooted.
Boot up and install triangleaway1.25.apk
Copy your ROM to SDcard
Reboot to recovery using the CWM app in Your note
Wipe data.factory reset wipe the other one below the list. I forgotten the name
Wipe develik cache from advance settings
Install the zip file called Criskelo ROM from Sdcard.
Once you are done reboot and enjoy your new rom.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
This does however increase the binary counter thus voiding warranty. By taking some extra steps you'll be able to upgrade to any ICS rom without increasing the binary counter.
What I did was I flashed one of the pre-rooted roms found in a thread in the dev section. After that I flashed the CF Root kernel for the rom I installed (I used the pre-rooted LA6 rom so I used the CF kernel for LA6).
Now you have full root and CWMR so you can flash any rom you like. For ICS roms, install Mobile Odin, flash the ICS LP1 repack, reboot to recovery, do a full wipe and install any ICS rom you want to try.
Pre-rooted stock roms: http://forum.xda-developers.com/showthread.php?t=1535025
For CF-Kernel check step two "2. I Want ROOT + CWM" of this thread and download the appropriate files for the pre-rooted kernel you flashed: http://forum.xda-developers.com/showthread.php?t=1329360
This is what triangle away is for.
Resetting the counter to none!
Sent from my GT-N7000 using XDA
gtee said:
This is what triangle away is for.
Resetting the counter to none!
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
thats what i was thinking...
gtee said:
This is what triangle away is for.
Resetting the counter to none!
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
To my knowledge Triangle Away only does exactly what is says, it will remove the yellow triangle after you've flashed a custom kernel through pc Odin and thus having triggered the binary counter. To my knowledge Triangle Away is not able to reset the counter though I could be wrong as I've never used it myself. There is however a thread explaining how to remove both the triangle and reset the counter using a usb JIG: http://forum.xda-developers.com/showthread.php?t=1354888
Counter is reset
using triangle away does reset the counter as well as removing the triangle also says your rom is samsung original even if it is not!.
you must use the correct ics version to do this one that does work is I9220LP1-N7000-ICS-REPACK worked just fine on my note. It does not work on all current versions of ICS. enjoy
Thanks a lot for the info! I really didn't know and I thought I read somewhere that it didn't reset the counter.
does the triangle away work for GB phones? just wondering
No
Sent from my GT-N7000 using XDA
Other way you could try
Hi, maybe you already flashed, but this is how I did it. No problems at all.
Starting from stock GB. (Or you can flash stock through ODIN)
Used CF-Root to get Root and CWR on the phone.
Downloaded and flashed Abyss Kernel 4.2
rebooted recovery
flashed ICS ROM from sdcard.
Worked perfectly well for me.
Hope this helps.
rupalazzi said:
Hi, maybe you already flashed, but this is how I did it. No problems at all.
Starting from stock GB. (Or you can flash stock through ODIN)
Used CF-Root to get Root and CWR on the phone.
Downloaded and flashed Abyss Kernel 4.2
rebooted recovery
flashed ICS ROM from sdcard.
Worked perfectly well for me.
Hope this helps.
Click to expand...
Click to collapse
i see... so ics will work on the abyss 4.2 rom? cool...
sadly... i havent been able to do anything on my phone... it hasnt arrived yet.. and yesterday i got a call from the provider saying its gonna EVEN more delayed
vyraz said:
i see... so ics will work on the abyss 4.2 rom? cool...
sadly... i havent been able to do anything on my phone... it hasnt arrived yet.. and yesterday i got a call from the provider saying its gonna EVEN more delayed
Click to expand...
Click to collapse
As soon as you flash the rom, abyss kernel will be overwitten (you get CWM).
Now a piece of advice, there are great risk on flashing any rom based on leak repack, there is an issue with the kernel and the eMMC, which basically can fry your phone (if you are unlucky).
I personally decided to flash back to stock GB.... just in case. I'm not willing to gamble with my note, but that is me.
Sent from my GT-N7000 using XDA
rupalazzi said:
As soon as you flash the rom, abyss kernel will be overwitten (you get CWM).
Now a piece of advice, there are great risk on flashing any rom based on leak repack, there is an issue with the kernel and the eMMC, which basically can fry your phone (if you are unlucky).
I personally decided to flash back to stock GB.... just in case. I'm not willing to gamble with my note, but that is me.
Sent from my GT-N7000 using XDA
Click to expand...
Click to collapse
thanks for the input... was kinda thinking that while doing alot of reading... im still considering a GB rom or an ICS rom
Hi All,
Hope I am in the good place to present my problem (i'm new in the forum and I'm just learning the "how to").
Yesterday I've rooted my Gnote (GTN7000 XXLPT - ICS just installed from OTA update). It was the paradise before i decide to instal "DPI change" ...
I set the DPI from 160 to 240 and then save + reboot ... Till that moment, my GNote stuck on the launching logo (Samsung Galaxy Note N7000).
I'm not an expert of Android (the proof ...) and I'm looking for the safest and easiest (step by step) solution to revive my GNote.
I know that XDA is an expert forum and therefore I please every of you that will see my request to help me ...
Ps: A part from the root I have applied no other manipulation on the phone (even the setup of the debuger mode).
Your kind help with this will be saving for me, given that there is no repair / after sale service available in my country.
Flash a safe kernel (speedmod),enter recovery and wipe data.
tibosee said:
Flash a safe kernel (speedmod),enter recovery and wipe data.
Click to expand...
Click to collapse
Thank you for your reply Tibosee,
However, I wonder how I can flash the kernel (a little step by step tutorial will be welcome).
Please help with this.
Regards.
I´d recommend flashing this kernel (HydraCore) http://forum.xda-developers.com/showthread.php?t=1749863
Kernel Installation
Install either through CWM or PC/Mobile ODIN in the usual manner. Wiping Cache and Dalvik Cache is unnecessary and wont make any difference. Flash only with 25% or more charge on the phone
Click to expand...
Click to collapse
If you had searched you would have known that you shouldn't use the app to change the DPI. Once you have reflashed a ROM or installed a new kernel, then use Rom Toolbox instead or edit the build.prop manually to change the DPI.
evilspyre said:
If you had searched you would have known that you shouldn't use the app to change the DPI. Once you have reflashed a ROM or installed a new kernel, then use Rom Toolbox instead or edit the build.prop manually to change the DPI.
Click to expand...
Click to collapse
Don't be to hard on him its not stupid to think that an app on market will work as advertised
Sent from my GT-N7000 using xda premium
Dont use apps to change dpi.. it wont work mostly.. i had the same problem on my note.. change it manually via your build prop..
Sent from my GT-I9300 using Tapatalk 2
Chillz88 said:
Dont use apps to change dpi.. it wont work mostly.. i had the same problem on my note.. change it manually via your build prop..
Sent from my GT-I9300 using Tapatalk 2
Click to expand...
Click to collapse
Rom toolbox works if you don't want to mess with build prop but evilspyre already mentioned that
Sent from my GT-N7000 using xda premium
Rivan_92 said:
I´d recommend flashing this kernel (HydraCore) http://forum.xda-developers.com/showthread.php?t=1749863
Click to expand...
Click to collapse
Dears,
Thanks a lot for all assistance with this. Google play will never lies me as long as XDA will be there !
From your various explanations I've drawn the process below (please confirm that my comprehension is correct):
1 - Download and install Mobile Odin (Please provide a link to the safest version); Dont know if Odin will see the phone since i've not activated the debuger mode when the phone parameters was accessible.
2 - Download and install Hydracore Kernel;
3 - Connect the phone on the PC and run Odin (at this step I am not sure to know what to do);
4 - Flash and enjoy (Hope I'll reach this step)
May be the procedure with CWM will be more practicable, especially in case Odin do not see the phone ... But I really not know how to handle it. That's the reason why I was asking a Step by Step assistance.
Thanks and Regards
PatrickNkamgnia said:
Dears,
Thanks a lot for all assistance with this. Google play will never lies me as long as XDA will be there !
From your various explanations I've drawn the process below (please confirm that my comprehension is correct):
1 - Download and install Mobile Odin (Please provide a link to the safest version); Dont know if Odin will see the phone since i've not activated the debuger mode when the phone parameters was accessible.
2 - Download and install Hydracore Kernel;
3 - Connect the phone on the PC and run Odin (at this step I am not sure to know what to do);
4 - Flash and enjoy (Hope I'll reach this step)
May be the procedure with CWM will be more practicable, especially in case Odin do not see the phone ... But I really not know how to handle it. That's the reason why I was asking a Step by Step assistance.
Thanks and Regards
Click to expand...
Click to collapse
You only use one of the two applications; Mobile Odin or PC Odin. You don't have to use them together. Since your phone doesn't boot, then I assume Mobile Odin is out of the question. I'm gonna write a quick guide to use PC Odin.
1- Download PC Odin from this link: http://ul.to/xt4607xx (you can search the forum, you will find many download links for Odin 1.85)
EDIT: Here's another link, the 1st one doesn't want to work anymore. http://k0nane.info/rom/odin-185.zip You can google "odin 1.85" and open the first link (it should be an xda forums attachment)
2- Download the standard tar file of the Hydracore 3.5 kernel from this thread: http://forum.xda-developers.com/showthread.php?t=1749863
3- Open PC Odin and click on PDA and choose your kernel tar file downloaded from step 2.
4- Remove all check marks and leave only Auto Reboot and F. Reset Time CHECKED.
5- Turn your phone off and remove the battery and reinsert it.
6- Turn your phone on by pressing and holding the Power button + Menu button + Volume Down button (to get into Download mode).
7- Connect the phone to the USB cable and connect it to the computer. Odin should show a yellow box.
8- Press Start in PC Odin. The yellow box will turn green which means a successful flash.
9- Now you can wipe data safely (never wipe data using stock ICS kernel btw).
How is flashing the kernel going to solve the problem of a b0rked build.prop? Get out of here people.
The only solution to his problem is to flash a custom Rom.
" 9- Now you can wipe data safely (never wipe data using stock ICS kernel btw). :)" [/QUOTE said:
Joey_oggie, thanks a lot for your step by step tutorial, it is realy clear now. I'll try it and revert to tou with the status of the phone.
Just a quick one, regardind the end of your post, you mentioned that I should not wipe a stock rom. My understanding is that stock rom = official samsung rom. Therefore it seems my rom was a stock one (GTN7000 XXLPT - rom updated from GB to ICS - OTA update), since I never change it.
Should I wathever do the wipe as mentioned in your post?
Click to expand...
Click to collapse
chasmodo said:
How is flashing the kernel going to solve the problem of a b0rked build.prop? Get out of here people.
The only solution to his problem is to flash a custom Rom.
Click to expand...
Click to collapse
Hi Chasmodo,
I was just about to flash the Kernel of my GNote following Joey's + others advices above.
Please why do you think flashing the Kernel is not advisable? ... Do you think the phone will thereafter completely brick?
Please answer these two questions as quick as you can ... My finger is on the "red bouton" just waiting for you.
Could you also provide a link to a step by step tutorial in case the solution proposed by Joey is safe but comes unsuccessful ?
Thank you for your contribution.
Regards.
If your build.prop is corrupted/broken, flashing a new kernel won't fix it because it won't replace your build.prop.
As Chas said, the easiest fix would be to flash a custom ROM, as this will replace your build.prop.
Regards,
Dave
Sent from my GT-N7000 using Tapatalk 2
chasmodo said:
How is flashing the kernel going to solve the problem of a b0rked build.prop? Get out of here people.
The only solution to his problem is to flash a custom Rom.
Click to expand...
Click to collapse
Well, to flash a new ROM, he needs to be on a safe kernel...
And anyway, I thought wiping data = factory reset. Isn't that right? If so, then wouldn't the wipe fix his problem? I'm new to this stuff so excuse me if that's completely wrong.
PatrickNkamgnia said:
Joey_oggie, thanks a lot for your step by step tutorial, it is realy clear now. I'll try it and revert to tou with the status of the phone.
Just a quick one, regardind the end of your post, you mentioned that I should not wipe a stock rom. My understanding is that stock rom = official samsung rom. Therefore it seems my rom was a stock one (GTN7000 XXLPT - rom updated from GB to ICS - OTA update), since I never change it.
Should I wathever do the wipe as mentioned in your post?
Click to expand...
Click to collapse
Well, from what I read, most (if not all) Samsung stock ICS kernels have a bug which would corrupt the data partition when you wipe on any of them. The problem would appear when you wipe ON them, and not wipe them.
PatrickNkamgnia said:
Hi Chasmodo,
I was just about to flash the Kernel of my GNote following Joey's + others advices above.
Please why do you think flashing the Kernel is not advisable? ... Do you think the phone will thereafter completely brick?
Please answer these two questions as quick as you can ... My finger is on the "red bouton" just waiting for you.
Could you also provide a link to a step by step tutorial in case the solution proposed by Joey is safe but comes unsuccessful ?
Thank you for your contribution.
Regards.
Click to expand...
Click to collapse
I would wait till he replies to be on the safe side. In the meantime, try to burn some time and read some of the threads in the Note's android development section.
Sent from my GT-N7000 using xda app-developers app
Also flashing the stock Samsung ROM would also solve the problem as it would replace the wrongly edited build.prop with the stock build.prop.
Assuming you have the stock ROM downloaded on your PC, flash it using PC ODIN as explained in an earlier post.
Everything downloading, installing and rooting the stock ROMs is explained here by Dr Ketan
Once that is done, you can root your stock ROM and install mobile odin. You can then flash any custom kernel which is safe and has the brick bug covered. Factory wipe using a safe custom kernel wont brick your phone then.
I am not sure if flashing a safe custom kernel and doing a factory reset would replace the faulty build.prop file with a stock one directly. Chasmodo could explain more....
Flashing a stock ROM would surely replace everything with stock. So you have a clean stock state from which you can play around (rooting, custom kernels/ROMS, etc)
joey_oggie said:
And anyway, I thought wiping data = factory reset. Isn't that right? If so, then wouldn't the wipe fix his problem? I'm new to this stuff so excuse me if that's completely wrong.
Click to expand...
Click to collapse
Wiping /data won't touch /system where build.prop is
Sent from my GT-N7000 using xda premium
---------- Post added at 09:04 AM ---------- Previous post was at 08:55 AM ----------
PatrickNkamgnia said:
Hi Chasmodo,
I was just about to flash the Kernel of my GNote following Joey's + others advices above.
Please why do you think flashing the Kernel is not advisable? ... Do you think the phone will thereafter completely brick?
Please answer these two questions as quick as you can ... My finger is on the "red bouton" just waiting for you.
Could you also provide a link to a step by step tutorial in case the solution proposed by Joey is safe but comes unsuccessful ?
Thank you for your contribution.
Regards.
Click to expand...
Click to collapse
Xda is full of instructions on how to use odin search it. Flashing a kernel won't fix your problem. Best to do as previously advised and flash a new rom, stock or custom either will do
AND DON'T PANIC take it slow and don't do anything before you understand the process your phone is currently in no danger what so ever but a faulty flash can definitely brick it
Sent from my GT-N7000 using xda premium
apurvapatel said:
Also flashing the stock Samsung ROM would also solve the problem as it would replace the wrongly edited build.prop with the stock build.prop.
Assuming you have the stock ROM downloaded on your PC, flash it using PC ODIN as explained in an earlier post.
Everything downloading, installing and rooting the stock ROMs is explained here by Dr Ketan
Once that is done, you can root your stock ROM and install mobile odin. You can then flash any custom kernel which is safe and has the brick bug covered. Factory wipe using a safe custom kernel wont brick your phone then.
I am not sure if flashing a safe custom kernel and doing a factory reset would replace the faulty build.prop file with a stock one directly. Chasmodo could explain more....
Flashing a stock ROM would surely replace everything with stock. So you have a clean stock state from which you can play around (rooting, custom kernels/ROMS, etc)
Click to expand...
Click to collapse
Thank you all,
Really hope that this issue will help all GNote users when solved. Sure we are approaching the solution ...
I read in Dr Ketan tutorial the following:
Don't wipe anything from stock ICS recovery
Don't factory reset/Hard reset on stock ICS.
Don't flash any Wipe version of ICS ROM
Yesterday, after my GNote freezed on the "Samsung Galaxy Note N7000" image I tried to hard reset by wiping user data via ICS recovery (just after rooting the phone with CWM.
Does it means that my GNote is now bricked?
If it is the case shoud I anyway continue to follow Dr. Ketan tutorial to flash my GNote with a stock rom?
Regards.
PatrickNkamgnia said:
Yesterday, after my GNote freezed on the "Samsung Galaxy Note N7000" image I tried to hard reset by wiping user data via ICS recovery (just after rooting the phone with CWM.
Does it means that my GNote is now bricked?
If it is the case shoud I anyway continue to follow Dr. Ketan tutorial to flash my GNote with a stock rom?
Regards.
Click to expand...
Click to collapse
Very sorry to say buddy, your Note most likely is bricked. I hope I am wrong.
Try installing a stock ROM, preferrably Ginger Bread ROM via PC ODIN. If it fails, most likely, at FactoryFS write, then your phone is surely bricked.
Let us know how it goes, we can guide you further accordingly.
PatrickNkamgnia said:
Thank you all,
Really hope that this issue will help all GNote users when solved. Sure we are approaching the solution ...
I read in Dr Ketan tutorial the following:
Don't wipe anything from stock ICS recovery
Don't factory reset/Hard reset on stock ICS.
Don't flash any Wipe version of ICS ROM
Yesterday, after my GNote freezed on the "Samsung Galaxy Note N7000" image I tried to hard reset by wiping user data via ICS recovery (just after rooting the phone with CWM.
Does it means that my GNote is now bricked?
If it is the case shoud I anyway continue to follow Dr. Ketan tutorial to flash my GNote with a stock rom?
Regards.
Click to expand...
Click to collapse
see if you can still go to download mode and reflash a stock GB on your device. If it's successful then your good to go... if not, then look for the thread here to revive a brick phone.. note down the errors your getting (if there are any errors at all) when your going to reflash it again.
Hi guys. I have a I9000 and i want to install the CyanogenMod 9 on it. I`ve Already rooted my phone using the Unlock Root. However, I can`t go to the Clockworkmod recovery to install customs rooms. I tried to flash the CWM recovery using the Rom Manager app, but when i was installing, an error happened. I figured out that the problem is my kernel that is not compatible with the CWM. I know that i have to flash a compatible kernel using Odin, but which kernel should i flash??? My device is a Galaxy S I9000, 2.3.5 android, and 2.6.35.7-I9000XXJVT-CL617736 kernel. Already rooted. Please someone could help me??
Thank you so much
Don't use rom manager, use Odin to flash, CWM is bundled with rooted kernel (CF-root, Semaphore)
Here is a collection of links and tips to tackle different situations when flashing, updating, fixes...
http://forum.xda-developers.com/showthread.php?p=30415128
This guide could work for updating to cm9.1
http://forum.xda-developers.com/showthread.php?p=22471340
Most important is to start making a backup of files in /efs folder in case of IMEI loss after some flash job.
http://forum.xda-developers.com/showthread.php?p=9567974
O-T said:
Don't use rom manager, use Odin to flash, CWM is bundled with rooted kernel (CF-root, Semaphore)
Here is a collection of links and tips to tackle different situations when flashing, updating, fixes...
http://forum.xda-developers.com/showthread.php?p=30415128
This guide could work for updating to cm9.1
http://forum.xda-developers.com/showthread.php?p=22471340
Most important is to start making a backup of files in /efs folder in case of IMEI loss after some flash job.
http://forum.xda-developers.com/showthread.php?p=9567974
Click to expand...
Click to collapse
Hi, I have the same error problem, cf root was not bundled with my own root package. I flashed to gingerbread 2.3.6 xwjw1, I also tried rom manager to flash recovery and it was successful, but when I rebooted to recovery to backup my current rom it bootes to the android (3e) recovery. As I've discovered it seems rom manager is not compatible with the xwjw1 series. How do I get the correct cf root for xwjw1? Believe me I have tried google and am scared of the things I see since "jw1" is not behind any of the cf root packages I see. Any help would be appreciated, thanks.
xtome
On xwjw1 you can Odin flash as PDA Semaphore 250 tar kernel
http://forum.xda-developers.com/showthread.php?p=14481782
Untick re-partition before flashing.
After reboot you may need to install Superuser from Play Store.
That will give you root, CWM, gingerbread ready for CM9.1
O-T said:
xtome
On xwjw1 you can Odin flash as PDA Semaphore 250 tar kernel
http://forum.xda-developers.com/showthread.php?p=14481782
Untick re-partition before flashing.
After reboot you may need to install Superuser from Play Store.
That will give you root, CWM, gingerbread ready for CM9.1
Click to expand...
Click to collapse
Thanks a lot ot will try it out and get back to you. Once again thanks.
Or you can use the app SGS kernel flasher. Find in play store.
renanrolim said:
Hi guys. I have a I9000 and i want to install the CyanogenMod 9 on it. I`ve Already rooted my phone using the Unlock Root. However, I can`t go to the Clockworkmod recovery to install customs rooms. I tried to flash the CWM recovery using the Rom Manager app, but when i was installing, an error happened. I figured out that the problem is my kernel that is not compatible with the CWM. I know that i have to flash a compatible kernel using Odin, but which kernel should i flash??? My device is a Galaxy S I9000, 2.3.5 android, and 2.6.35.7-I9000XXJVT-CL617736 kernel. Already rooted. Please someone could help me??
Thank you so much
Click to expand...
Click to collapse
Use Odin to flash (put .tar in PDA and uncheck repartition). You can flash Semaphore JVT 1.8.0 or CF-Root v4.3
Sunnymen1975 said:
Or you can use the app SGS kernel flasher. Find in play store.
Click to expand...
Click to collapse
Thanks Sunny men, but OT's advice worked, I can now boot to semaphore recovery and wipe etc.
Question though, if I now flash cm9.1 rom, will I be able to boot to recovery without the holding any button combinations. What I mean is can I boot to recovery from the shutdown menu or do I need an app for it?
Also is cm9.1 the best rom for my phone? any thots guys? Thanks again.
xtome said:
Thanks Sunny men, but OT's advice worked, I can now boot to semaphore recovery and wipe etc.
Question though, if I now flash cm9.1 rom, will I be able to boot to recovery without the holding any button combinations. What I mean is can I boot to recovery from the shutdown menu or do I need an app for it?
Also is cm9.1 the best rom for my phone? any thots guys? Thanks again.
Click to expand...
Click to collapse
Yes, in CM 9.1 you can boot directly to recovery from the shutdown menu. CM 9.1 is very stable and fast, so try it. And when you flash CM9 for the first time, your galaxy will go into a bootloop. Then remove the battery, put it in, go to recovery with 3-button configuration and flash it again.
sin007 said:
Yes, in CM 9.1 you can boot directly to recovery from the shutdown menu. CM 9.1 is very stable and fast, so try it. And when you flash CM9 for the first time, your galaxy will go into a bootloop. Then remove the battery, put it in, go to recovery with 3-button configuration and flash it again.
Click to expand...
Click to collapse
Thanks sin007, that is invaluable advice. Will do just that. thanks again.
Hi guys, thanks for all the help. I have flashed CM 9.1 successfully.
Everything works OK for now.
Also flashed gapps, CM 9.1 seems to be a great ROM.
I have a question though, the gapps I flashed seems to have only a few Google apps, play store and Google talk. The file size was 49mb so is that all that's in gapps or is there a hidden mode or something.
Also, sin007 I can't find any reboot to recovery from the shutdown menu, though I flashed a stable version of CM 9.1 and not a "nighty version". Could that be the reason? But no biggie, CM 9.1 comes with rom manager.
Finally I wouldn't mind any tips you guys have on making the most out of the ROM.
Thanks and all the best.
Shutdown menu - Reboot - Recovery
OK?
There is an APP on google play, sgs kernel flash, it is easier and faster than Odin. And works perfectly. I've flash the speedmod kernel and finally upgrade to cyanogenmod 9.1.
Anyone knows if this APP works on galaxy s2 (i9100)?
Thankss
Sent from my Nexus 7 using xda app-developers app
O-T said:
Shutdown menu - Reboot - Recovery
OK?
Click to expand...
Click to collapse
Oops sorry, didn't bother pressing the reboot button, typical noob error. Thanks OT.
I have a problem though, I just discovered my phone's imei number has changed after I flashed cyanogenMOD 9.1. How is this possible and how do I get back my original imei number?. Thanks.
xtome said:
I just discovered my phone's imei number has changed after I flashed cyanogenMOD 9.1. How is this possible and how do I get back my original imei number?. Thanks.
Click to expand...
Click to collapse
read this http://forum.xda-developers.com/showthread.php?t=1857054 and solutions for it on My Android Solutions, link below
xsenman said:
read this http://forum.xda-developers.com/showthread.php?t=1857054 and solutions for it on My Android Solutions, link below
Click to expand...
Click to collapse
Thanks xsenman, you're a lifesaver. Love all ur posts, really useful to have. Thanks again and also a big thanks to all who helped out.
Cheers everyone.
hi
please want help from your guys.
My GT N7000 hangs after wipe-user data in cwm and stucked in first "samsung galaxy note gt n700" logo!
I tried to run the volume up+power+menu but the bot came and devise restart again and stucked in the logo!
the volume down+power+menu (custom rom installation mode) is working.
My note is in stock ICS with stock karnel. I have a custom rom name ultimate_N7000_LSC_JB_4.1.2_V5.1.zip.
can i use above to solve the brick problem via odin, please help I am completely black out:crying:
regards
toufiq
toufiq47 said:
hi
please want help from your guys.
My GT N7000 hangs after wipe-user data in cwm and stucked in first "samsung galaxy note gt n700" logo!
I tried to run the volume up+power+menu but the bot came and devise restart again and stucked in the logo!
the volume down+power+menu (custom rom installation mode) is working.
My note is in stock ICS with stock karnel. I have a custom rom name ultimate_N7000_LSC_JB_4.1.2_V5.1.zip.
can i use above to solve the brick problem via odin, please help I am completely black out:crying:
regards
toufiq
Click to expand...
Click to collapse
so you were on stock ics when you wiped in stock recovery ? now you want to flash ulitmate jb custom rom ?
sorry not clear to me......
dont post Questions in the general section of the forum please
rraaka said:
so you were on stock ics when you wiped in stock recovery ? now you want to flash ulitmate jb custom rom ?
sorry not clear to me......
dont post Questions in the general section of the forum please
Click to expand...
Click to collapse
hi dear,
yes in stock ICS as i mentioned (while i wiped)
the jb I downloaded but did not use, thats why i asked if i can use it ryt now or not? clear?
thanks/ toufiq
first put the Stock rom back again using Odin. then root using a safe philz kernel (no wipes till then) and then go about installing the new rom
nokiamodeln91 said:
first put the Stock rom back again using Odin. then root using a safe philz kernel (no wipes till then) and then go about installing the new rom
Click to expand...
Click to collapse
many thanks for the reply.
could u plz give me a link for stock rom, by which i can restore it by odin
regards/ toufiq
samfirmware.com
Same thing happen to me while I was on ultimate jb 5.1. This is what I did.
Removed sd card sim card.
Connected usb to pc while gnote on and stuck at logo. ( mine didnt go into recovery or dowlod mode) even the pc didnt show any usb connect msg. But I started odin and run as admin on pc.....lo and behold my gnote vibrated and proceed to samsung logo and tw and now working goog.
Sent from my SAMSUNG-SGH-I747 using xda app-developers app
after stock rom and odin i am stucked in here (see the attached file)
toufiq47 said:
after stock rom and odin i am stucked in here (see the attached file)
Click to expand...
Click to collapse
thats the reason why I asked to confirm.....
if you wiped on stock ics rom in stock recovery then it means your phone is bricked.
Phone getting stuck on factory fs during flash via pc odin is another confirmation.
Follow the guide in this --
http://forum.xda-developers.com/showthread.php?t=1667886
If you have warranty then go to service centre and get motherboard replaced ( a better option) but tell them you were trying for update and phone did not reboot.
ok, recovery mode (CWM) is on now
rraaka said:
thats the reason why I asked to confirm.....
if you wiped on stock ics rom in stock recovery then it means your phone is bricked.
Phone getting stuck on factory fs during flash via pc odin is another confirmation.
Follow the guide in this --
http://forum.xda-developers.com/showthread.php?t=1667886
If you have warranty then go to service centre and get motherboard replaced ( a better option) but tell them you were trying for update and phone did not reboot.
Click to expand...
Click to collapse
ok, i tried once again and the cmw works! i installed karnel "philz touch 3" cwm base version 6.0.1.9. now could anyone plz guide me how to repair the OS?
thanks again for support
toufiq47 said:
ok, i tried once again and the cmw works! i installed karnel "philz touch 3" cwm base version 6.0.1.9. now could anyone plz guide me how to repair the OS?
thanks again for support
Click to expand...
Click to collapse
in an emmc brick the download mode and recovery both work.
lol you did battery pull didnt you?
some have reported when on safe kernel, make a nandroid backup, factory reset, put nandroid back worked for them
Sent from my GT-N7000 using Tapatalk HD
We need to be clear here. Did the wipe occur on stock 3e ICS recovery, Which is NOT a CWM recovery. OR did the wipe happen AFTER reflashing CWM.zip (the one from you-tube or wherever - originally used to root phone).
If the latter, then we are talking about a true SUPERBRICK. ie: repartition or new MOBO being only options.
Sent from my GT-N7000 using xda app-developers app
superbrick!!
shoey63 said:
We need to be clear here. Did the wipe occur on stock 3e ICS recovery, Which is NOT a CWM recovery. OR did the wipe happen AFTER reflashing CWM.zip (the one from you-tube or wherever - originally used to root phone).
If the latter, then we are talking about a true SUPERBRICK. ie: repartition or new MOBO being only options.
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
hi,
yes the wipe occured in ICS cwm (volume up). after the mode i flash cwm.zip. then the touch menu i wipe the data :crying:
then the mobile is supper brick!!! :crying::crying:
Same happened to me you have warranty?
Sent from my GT-N7000 using xda app-developers app
no warrenty
shoey63 said:
Same happened to me you have warranty?
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
no bro, no warranty left. too much pain bro...... i really love the note. and still trying to brig it back to life. what about ur device?
Mine got replaced under warranty. You need repartition or fork out big bucks for new MOBO. Try hg42's method. http://forum.xda-developers.com/showthread.php?p=26428986
Sent from my GT-N7000 using xda app-developers app
this is not warrantee issue, you voided warrantee by doing stuff. And you used cwm. zip known to be unsafe...why? Who told you to use cwm. zip?
life saver!!!
shoey63 said:
Mine got replaced under warranty. You need repartition or fork out big bucks for new MOBO. Try hg42's method. http://forum.xda-developers.com/showthread.php?p=26428986
Sent from my GT-N7000 using xda app-developers app
Click to expand...
Click to collapse
you know that you are a life saver!!! the link method worked and my note is running now ultimate JB.. many thanks dude
regards/ toufiq
baz77 said:
this is not warrantee issue, you voided warrantee by doing stuff. And you used cwm. zip known to be unsafe...why? Who told you to use cwm. zip?
Click to expand...
Click to collapse
the zip file was with the sd card, it was there for root purpose. got it from Max Lee. but "little knowledge is dangerous" ---- that happens to me. after the problem i knew that thats dangerous. thanks to the ^ person who save my note. God bless you man
regards
Toufiq
Hi,
other day I was playing game on my note 1 and then battery ran out and now my phone wont boot up and it is stuck at animated samsung logo.
It was running on stock rom and it was never rooted.
Now when i go in recovery mode it gives this error:
failed to mount /efs
I tried installing the stock rom but with no luck.
I am newbie into this all, so can you please guide how to fix this ..
Regards
ahmedmasu said:
Hi,
other day I was playing game on my note 1 and then battery ran out and now my phone wont boot up and it is stuck at animated samsung logo.
It was running on stock rom and it was never rooted.
Now when i go in recovery mode it gives this error:
failed to mount /efs
I tried installing the stock rom but with no luck.
I am newbie into this all, so can you please guide how to fix this ..
Regards
Click to expand...
Click to collapse
You should try to put your Note in download mode and flash a stock rom with Odin.
You must flash the PIT file to repartition your phone's storage, chose the right one (16 or 32 Gb).
I am almost sure that your phone is soft bricked and it is recoverable.
If it don't work, thant mean that your have bad blocks in your phone's storage. Have you wiped your note while under ICS android ?
what rom were you on? if JB, try a factory reset.
nokiamodeln91 said:
what rom were you on? if JB, try a factory reset.
Click to expand...
Click to collapse
I was on latest stock rom which is ICS.
Btw I tried to reset it to factory but with no luck
lionelia said:
You should try to put your Note in download mode and flash a stock rom with Odin.
You must flash the PIT file to repartition your phone's storage, chose the right one (16 or 32 Gb).
I am almost sure that your phone is soft bricked and it is recoverable.
If it don't work, thant mean that your have bad blocks in your phone's storage. Have you wiped your note while under ICS android ?
Click to expand...
Click to collapse
Thank for your reply.
I tried flashing the stock rom with Odin but the error remained there
Can you please give me a link from where I can get PIT file?
ahmedmasu said:
I was on latest stock rom which is ICS.
Btw I tried to reset it to factory but with no luck
Click to expand...
Click to collapse
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
nokiamodeln91 said:
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
Click to expand...
Click to collapse
Is there any guide\link to do this ?
http://forum.xda-developers.com/showthread.php?t=1901191
nokiamodeln91 said:
You shouldn't be doing a reset on ICS stock at all.. Install Philz kernel for ICS and wipe data and cache.. When flashing a stock rom using odin, is it a success?
Click to expand...
Click to collapse
I have successfully flashed rom on my phone which is : N7000ZSLPF_N7000OZSLPF_OZS
My phone is now out of bootloop but now I face a different issue that I cant get my sim card work, it gives no signal and I noticed one more thing that IMEI of my phone is blank.
I went into recovery mode and it is still showing that efs error as it was showing before...
Any suggestion what should I try to fix this ?
So you never installed any rom or a custom kernel?
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Look for a file on your storage named efs.autobackup.img. If nothing like that, check on this site http://www.cvxcvx.pl/en/podstrona-0/naprawa-efs-w-i9100-n7000/ for some instructions. Read carefully and proceed.
nokiamodeln91 said:
So you never installed any rom or a custom kernel?
---------- Post added at 03:15 AM ---------- Previous post was at 03:11 AM ----------
Look for a file on your storage named efs.autobackup.img. If nothing like that, check on this site http://www.cvxcvx.pl/en/podstrona-0/naprawa-efs-w-i9100-n7000/ for some instructions. Read carefully and proceed.
Click to expand...
Click to collapse
I followed the instructions provided by the manual ... after step 2 I get imei but after step 3 it get empty again.
Signals do come after step 2 but when I try to make some call it says "Not registered on network".
Looking forward to your reply.
i cannot help you in this case if there is no efs backup.. so.. you on your own..
nokiamodeln91 said:
i cannot help you in this case if there is no efs backup.. so.. you on your own..
Click to expand...
Click to collapse
Thanks for your help so far...
I currently have an imei but it is some random number starting with "004999" and I do get signals but cant make a call .. Do you know if there is some hope for me or not .. and what else I can try.
This is the developer imei. You may be able to make calls of you try a GB rom. Or there is one rom by ThaiDai which had some work around built into it. I don't know which one.
Else the site I mentioned earlier has contact info of cvxcvx. He can fix your phone remotely but by charging about 10 euros.
Need help for a bricked N7000
Hi guys,Im a complete newbie to the whole custom rom scenario. Yet, after being fed up of touchwiz on my N7000 i decided i wanted to taste some KitKat on my phone. After seeing many videos with positive reviews I thought it would be a rather easy process. But somehow I seem to have made a mistake and now my phone is stuck on Samsung Galaxy Note N7000 logo. I cant get into recovery mode as suggested on most places. As of now I only have access to the download mode but dont know what to do with it.
Here's what I tried doing :
1) I was on stock OS, and these are my specifics : Galaxy Note N-7000 running JB 4.1.2
Baseband version : N7000DDLS6
Kernel version: 3.3.31-906407
BUild number:JZO54K.N7000DDLSC
2) As I was following the procedure from Omnirom's official website, I first rooted my phone using Framaroot's single click root app. This gave me SuperSU app.
3) Then I tried installing TWRP recovery (recommended by Omni) but they dont support the N7000. I read a few other tutorials where it was stated the CWM recovery and that too Philz CWM recovery is the best to go with. Apparently it is just stock kernel with CWM recovery. Since the latest one(philz_touch_6.07.9-n7000) was not being installed, I installed the one before that which worked (PhilZ-cwm6-DDLSC-ODD-5.11.2-signed).
4) I even installed the ROM Manager as per the tutorial. However, uptil now I could access recovery mode ( Vol UP+Home+Power) and i saw the touch enabled philz recovery mode once. Then i did system reboot.
5)After reboot, this is where I did a mistake in my opinion. I opened ROM Manger and clicked on "open in recovery mode" option. Since then the phone is stuck on the Galaxy Note N7000 logo. Please help me revive the phone. Thanks in advance. Again, Im doing this for the first time and most terms are new to me. So please explain the procedure as other tutorials are not very clear.
You missed on reading the most important instructions.
Rom manager will not work with note. Recovery is built into the kernel on note and not as a separate partition.
Try harder to get into recovery mode. If you still can't, get the ddlsc Philz kernel tar version. Flash it using Odin. Then power off the device and boot into recovery. Then flash raw kernel. Reboot recovery. Flash omni and other required zips.
nokiamodeln91 said:
You missed on reading the most important instructions.
Rom manager will not work with note. Recovery is built into the kernel on note and not as a separate partition.
Try harder to get into recovery mode. If you still can't, get the ddlsc Philz kernel tar version. Flash it using Odin. Then power off the device and boot into recovery. Then flash raw kernel. Reboot recovery. Flash omni and other required zips.
Click to expand...
Click to collapse
How do I do i install the kernel using ODIN? I can only access download mode and nothing else. I cant access recovery mode. Please help.
PhilZ kernel has two versions, zip and tar. Use the tar version to flash via odin.
Sent from my GT-N7000 using Tapatalk 2
forest1971 said:
PhilZ kernel has two versions, zip and tar. Use the tar version to flash via odin.
Sent from my GT-N7000 using Tapatalk 2
Click to expand...
Click to collapse
Bro can i ask for the link of philz kernel and raw kernel. I'm new here. Thanks in advance.
ANDROID-000 said:
Bro can i ask for the link of philz kernel and raw kernel. I'm new here. Thanks in advance.
Click to expand...
Click to collapse
http://www.mediafire.com/?ep82ku4c6...o6dtlx8lbc3xz,ob3q9g36b9b3w22,d3v1gys7cbckiet