Related
Hello, I tried to install a firmware page samfirmware.com my samsung galaxy EUR tab is P1000. installed with odin and all was fine but now the tab does not turn.
Can someone help me?
Thank you and sorry for my bad English.
Can you get into download mode? hold volume down and power.
the screen does not turn but odin detects tab
Thanks.
Connect your usb to the power socket. If battery icon appears then there is hope. It seems like a display problem for me. If it doesnt your display might have issues. Try reflashing with odin and see. Also noob question did you flash with correct firmware for your device. If it still doesnt turn on it might be a hardware issue than a software one.
No battery icon appears. But if I connect to the laptop the odin detects the Tab. I put the wrong firmware.
Thanks.
rui_sandra said:
No battery icon appears. But if I connect to the laptop the odin detects the Tab. I put the wrong firmware.
Thanks.
Click to expand...
Click to collapse
If odin still able to detects it, then there is hope. But this procedure will wipe your tab clean, even internal sdcard!
Now, go to here and get Roto JMI FULL ROM + P1_add_hidden.pit.
Once you've done it, put your tab into download mode by:
1. Turn off your tab without plugging it into anything;
2. Press and hold Power + Vol down till your tab is on;
3. When you see android shoving picture, it's in download mode.
Plug your tab to your pc, launch odin. If it shows up, put P1_add_hidden.pit in PIT field, Roto-JMI-Full-v2 in PDA field. Check "Re-Partition" & "Auto Reboot". And let it flash. Your tab should be able to boot up now, with root installed, and future updates will not need to go through kies.
REMEMBER: DO NOT DOWNLOAD ANY FIRMWARE FROM SAMFIRMWARE.COM AS THEY CONTAINS LOCKED BOOTLOADER! Once you get above procedure done and able to boot up, then report back, still have things to be done
The installation went well but the tab still does not connect. The screen remains dark.
Thanks.
rui_sandra said:
The installation went well but the tab still does not connect. The screen remains dark.
Thanks.
Click to expand...
Click to collapse
Dark as in you still able to see anything on the screen or it wouldn't even turn on? Cause for tab, if battery power reach 10% or lower it will remain dim(as in without backlight, but screen is still on.
The screen does not turn. It was so because a wrong firmware installed. But odin recognizes the tab. Is there any possible solution?
Thanks and sorry my bad english
rui_sandra said:
The screen does not turn. It was so because a wrong firmware installed. But odin recognizes the tab. Is there any possible solution?
Thanks and sorry my bad english
Click to expand...
Click to collapse
Start up sound working as well? I thought after repartition and flashing new firmware should make things back to life. The tab never accidentally dropped before right?
Not to sound. the tab never fell. became so after a firmware update with wrong.
Thank you.
rui_sandra said:
Not to sound. the tab never fell. became so after a firmware update with wrong.
Thank you.
Click to expand...
Click to collapse
Without screen, I can't really help much now. If even charging through wallplug without showing battery icon, I believe your screen is basically defective, perhaps you needs to send back to samsung for a screen replacement since it's still new
i had the same problem before and i panicked. but all i have to do was to
1-flash Roto-JMI-Full-v2 with ODIN (No PIT and No Repartition)
you will get no touch screen after doing this
2-flash the stock ROM with ODIN (with PIT and Repartition checked) again and it will work
Where can I get the stock ROM download from?
Stuck with the same problem. So downloading the Roto-JMI-Full-v2 image. But not sure where to get the stock ROM from.
For me,
I am able to get the battery on the screen when I connect the usb.
I am able to get into the downloading screen by pressing the power + vol down.
Odin detects.
Odin gives me a "Pass" when I flash with Roto-JMI-Full-v2.
But after that I still cannot get in. The Screen is stuck on the Galaxy Tab with samsung logo at the bottom.
Any help would be great since I cannot do anything with the Tab right now.
Hi
I was trying to root my Galaxy with gingerbread 2.3.3.
I installed Odin3 and downloaded CF-Root-XW_NEE_JVH-v3.2-CWM3RFS put the tar in PDA on Odin, restarted my phone, put it into download mode, pluged in the USB, pressed start, and got a failure notice and that there was a Comm error.
I figured that there was not done anything to the phone since there was a comunitation error, so i unplugged the phone and tryed to start it up, but there was only a black screen with a picture of a phone...Triangle with !...and a PC sign.
I then tryed to look on the web for a clue, and someone was writing that Heimdall was so much better to use.
So i downloaded Heimdall-suite-1.3.1-win32 and opend XXJVT_Heimdall.tar in Heimdall, Connected the Phone in download mode and started the prossess, after a few moments i got error in uploading PIT and the whole thing aborted.
When i try to turn off the phone now, notting happens, not even the black screen with the triangle. Its only download mode that works.
Can someone plz help me? im lost!
If download mode works, it's should let u use odin again or not?
Don't worry. Rule of thumb: if you can get into download mode, you're fine.
Download a firmware of your choice (JVS being the newest, I've literally just flashed it). Boot into download mode and flash the firmware. You'll be back to stock. From here, you can install a custom kernel with root.
same kind of issue with me..the only difference cant get into download mode..stuck on the at&t logo..the phone keeps on flashing a white n black screen..any help?
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
You can check if it is in download mode by pluggin it in pc with odin. See the wiki page what it says about soft brick.
Soft-Bricked
After flashing a rom you might not be able to enter the Download Mode by pressing Volume Down + Home + Power. In this case a so called 'JIG' would be helpfull.
You could build it on your own: [HOWTO] [REF] Get Download Mode without 3-button combo using homemade JIG
... or buy a preassembled one on a well known marketplace.Hint: There is no difference between a JIG for Samsung S/S2 or S-Plus.
See if you can go into d0wnload mode with vol down home and power. If that works go and try to find the stock firmware for the phone and download and extract. Download odin and put csc pda and phone/modem in there rightful places. 512 pit in pit section. Pit usually comes with odin download. If not find it somewhere. Repartition checked and hit start. It should reboot when done. It will problaby take a couple of min to boot but be patient. If it starts to go into boot loop put back into download mode again and reflash. Its very hard to mess up the phone to where you cant fix it. So relax and watch tuts or whatever helps you best. I know of a link i that i will find and post for you when i do.
Sent from my GT-I9000 using XDA
http://forum.xda-developers.com/showthread.php?t=1102881
Sent from my GT-I9000 using XDA
DEAD bricked phone
So, my friend's phone (hopefully she'll stay my friend after this) was turning itself on and off all on it's own. So I (no good deed goes unpunished) suggested that I will upgrade her firmware for her. She had 2.3.3 firmware. I downloaded the odin1.7 as well as a package of all the info for 2.3.5 firmware upgrade. I flashed the phone- originally only using the PDA option with a file called: CODE_I9000XXJVS_CL565837_REV03_user_low_ship
It worked, the phone restarted and showed the firmware as being 2.3.5.
I don't know why, but I thought it would be a good idea to update the CSC and the pit and the modem as well- so I did that. when this was finished - though odin said that the flashing was successful the phone is completely unresponsive. The computer doesn't recognize it, it doesn't show any signs of life at all- like it's in the dark ages and there is no electricity in it.
HELP!!!
First question: do you think a jig will work? how dangerous is it?
second question: is there any other option to try that I haven't come across other than changing the motherboard, and if there isn't do you know where I can get one, bear in mind I live in Israel.
Please e-mail me a copy of the response to [email protected] if you can...
Odin dosnt pick it up atall plus the batteries dead aswell now and the stupid thing wont charge so i cant evan try any thing till i find away or some one to charge it but thanks for the tips.
gavster26 said:
Hi everyone. Im not normally in this section as i have an x8 but my friend has seen all the roms,mods and updates ive done so he tried to do it to his galaxy s i9000 without rooting or unlocking his bootloader. I asked him what he did he said he just tried to update software with keis but now it wont turn on just white screen with a red triangle in the middle i hope its download mode as i dont have a galaxy i dont really no but the battery has died and it wont charge im guessing hes damaged the bootloader am i right and if so whats the best corse of action to tepair it. Thanks.
Click to expand...
Click to collapse
Try to recharge the battery from other phone or use another battery.
Check whether you have the download mode working. (Home+Power+Volume down)
If yes, put phone in download mode and flash Darky RE or any other Rom via ODIN. Try to get the recovery mod after rooting and then try ROMs.
Or try restarting the phone it may work without update also. Long press power in download mode restarts the phone. However be careful.
What is the status of the device can you go to download mode
Post your firmware files name and how you choose in the odin flasher.
Dont try anything crazy you will bricked your device more:banghead:
Sent from my GT-P1000 using XDA
Alternate way to Download mode
Hi gavster26
I have been there with a buddy's phone... not a nice place.
Found a link showing this other trick ... but you have to trial and error this one on the different combos:
1. Phone off
2. USB cable pluged in
3. Odin running
4. Down (or Up - test both) Volume button + Home button + plug in the USB cable.
This booted my dead "bricked" phone into download mode.
Try it.
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
Flash a desired firmware from Sammobile. using odin
Make sure that pit file is used
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
you can reconnect it to kies, as it is still on download mode to do recovery like this
http://www.4shared.com/office/koYpRWc1/KIES_update_recovery.html
re you can download a firmware according to your location and flash with Odin
jjake47 said:
Hi
I just got sometime today to upgrade my old samsung galaxy s i9000(India), it was on gingerbread and just cheked with Kies which showed me an available upgrade, so I just factory reset my phone, and proceeded with upgrade, somewhere down the process, it said kies did not recognise my phone and asked me to disconnect and remove battery and boot again, i tried that and since then I'm stuck with a phone+!+comp icon on the screen, please help its urgent, I have to travel out tomorrow morning, i cant afford to go to samsung on this.
Thanks a lot in advance
Click to expand...
Click to collapse
are you able to get into download mod or totally not boot up at all
The only solution si to flash a new firmware using odin
Sent from my GT-I9000 using xda app-developers app
Go back to the original India ROM - https://www.fixmystuff.in/FMS_Forum/threads/samsung-galaxy-s-gt-i9000-flashing-to-original-rom.46/
i update my phone using odin with pit file .
now phone not starting any help..
AW: Phone not booting after failed firmware upgrade-urgent
same screen as before?
now phone not booting up at all..
AW: Phone not booting after failed firmware upgrade-urgent
sorry but i'm no expert :/
Does Odin show a connection?
Maybe you can build a so called JIG.
same issue
Hi,
I am in same situation. did it get resolved?
I have GT I90003 which is now not booting and remaining on 'Phone-I-PC' image.
I was using Odin to root but in between cable got disconnected. and now I am nowhere.
Please help how to resolve this problem.
Thanks,
Bhupendra.
see here for firmware n juz change usb port if needed
http://forum.xda-developers.com/showthread.php?p=14933114
or use DDLF1 or DDMF2. Search it using search box in xda.
n dont use i9000 rom for i9003 rom, it will hardbrick ur device, u can search for i9003 post discussiom using searchbox in xda
Sent from my GT-I9000 using xda premium
i have the same problem
i was trying to update my phone and the cable usb move now i have just a black screen with a phone icon + triangle alert+ computer icon. And the problem is that my cellphone doent connect with the computer.
is a samsung s captive. could you help me
Zaddiel said:
i was trying to update my phone and the cable usb move now i have just a black screen with a phone icon + triangle alert+ computer icon. And the problem is that my cellphone doent connect with the computer.
is a samsung s captive. could you help me
Click to expand...
Click to collapse
You have to try again to get it into download mode.
Use Odin for your device model and run it as administrator. If Kies is installed, kill all Kies processes by using Task Manager. Prepare the files under PDA etc. Pull out the battery and hold power button pressed for 1min. Then keep all buttons combo for download mode and insert the battery while pressed (needs some acrobacy skills). If the download mode starts, you can connect your phone and flash firmware again.
tetakpatalked from Nexus 7 flo
thank you
tetakpatak said:
You have to try again to get it into download mode.
Use Odin for your device model and run it as administrator. If Kies is installed, kill all Kies processes by using Task Manager. Prepare the files under PDA etc. Pull out the battery and hold power button pressed for 1min. Then keep all buttons combo for download mode and insert the battery while pressed (needs some acrobacy skills). If the download mode starts, you can connect your phone and flash firmware again.
tetakpatalked from Nexus 7 flo
Click to expand...
Click to collapse
Thanks it really works
Zaddiel said:
Thanks it really works
Click to expand...
Click to collapse
Great, mate
BTW, hitting the thanks button would do more than words
tetakpatalked from Nexus 7 flo
Hi,
I have a big problem. I made a stupid mistake and flashed an original Gingerbread firmware directly over Froyo.
Now my Phone isn't able to start, the only thing tha happens is, that the backround light turns on. I am not able to reach the download mode and my pc can't detect the phone.
Could anyone help me?
Maizelll
Today i bought a USB-JIG, but I can't reach the bootloader with it.
you cannot reach bootloader mode with jig and try going into download mode by pressing power+home+volume down button
and gingerbread firmware is always flashed over froyo
i think you have used the firmware which is without bootloader and thats why you are getting black screen
just try to flash a four package firmware
But my pc doesn't detect the phone and i can't reach the download mode with the three buttons, i always get a black screen
try to search for samsung usb drivers and install them. after, recover by odin.
try to put off the battery , sim card and microSD , wait for 1-2 minutes
after that , put back battery only
try to enter download mode
*sorry for my bad english*
Maizelll said:
Hi,
I have a big problem. I made a stupid mistake and flashed an original Gingerbread firmware directly over Froyo.
Now my Phone isn't able to start, the only thing tha happens is, that the backround light turns on. I am not able to reach the download mode and my pc can't detect the phone.
Could anyone help me?
Maizelll
Click to expand...
Click to collapse
Ok... first download full firmware from sammobile or in yagyagaire's blog. Next you need to remove sim, sd card and battery from your phone. Now hold the three buttons which let you go in download mode. While holding those buttons insert the battery and you will most probably be in download mode. Then flash the downloaded firmware via Odin and then :victory:
Sent from Galaxy mini running CM10(Android 4.1.2 (Jellybean)).
guys why discussing on a 1 month old thread
Guessing they just want some closure.