Hey everyone I recently completed rooting the v10c and successfully upgraded to v10f on the wind/canadian version of the LG P880 Optimus 4X HD, however after when I try to install the CWM (http://forum.xda-developers.com/showthread.php?t=1826378) I followed every instruction many times but whenever I try to click boot into recovery the phone will freeze at the wind logo on boot. Afterwards the only thing I am able to do is reflash the KDZ file back to v10c and start over again. Anybody have any ideas how to fix this and install the CWM?
Thanks again.
Related
Hi all. I did something very stupid. I have a korean Optimus 2x su660. I flashed clockwork recovery and made a backup of my system, which went smoothly. Thinking that with clockwork recovery and a backup, i was safe, I then installed the Modaco custom rom v1. That install went smoothly. However i'm guessing because it was built for the p990, it did not run very well on my su660. Some FCs and the buttons didn't work. I also flashed the latest baseband(provided by modaco). After that, I figured I would just restore my backup, which I did, but after the restore, the phone locks up on boot. I tried booting multiple times, restoring multiple times....nothing seems to work it always locks up mid-boot. Does anyone have a suggestion on how I can fix this??
PLEASE HELP!!!
try this:
http://forum.xda-developers.com/showthread.php?t=1007825
michaelduijkers said:
try this:
http://forum.xda-developers.com/showthread.php?t=1007825
Click to expand...
Click to collapse
That is for the p990. not the su660. He will have the same problems with buttons that dont work.
Are there no korean forums with roms for the su660? if there are you could flash one of them. But i think using the stock p990 rom would be a really bad idea.
Did you try to flash this one?
http://forum.xda-developers.com/showthread.php?t=942830
easy, using the same ver when you backup the whole system.
i have the same issue. i use recovery beta2 backup but i will not bootup if use beta3 to restore
I used the same version of recovery to back up and restore and had no success...thanks for the advice though. I have .kdz and .bin versions of korean firmware, but cannot flash them onto my device. I tried using the KDZ_FW_UPD but it crashes everytime i try to flash the firmware, and I have no idea how to flash a .bin onto my device. Any tips/thoughts? Thanks!
Have you tried following the guide for "getting back to stock" for the p990, and just replacing the files with the su660?
I have not tried replicating the process described to get the P990 to stock using NVFlash with the SU660 files because there are no files that work with NVFlash for the SU660. I have .kdz and .bin files for the SU660 and have no idea how to flash them (NVflash, as far as I know cannot do it with those file types). Has anyone done something like that successfully with NVFlash and .bin/.kdz files?
Charlie
Hello, I've recently tried installing Topogigi's ICS v30a ROM from ParanoidAndroid. During the process, I've upgraded CWM to 6.0.1.2 and performed a full dalvik, cache and data wipe on my phone. I first tried installing Topogigi's ICS v30a ROM using an earlier version of CWM without any success however after upgrading to a newer version of CWM and installing the rom, my phone appears to be hard bricked. Once I turn on the phone, the LG logo appears and then it shuts down within seconds. Entering recovery mode only gives me a blank screen. Any ideas?
EDIT: got it fixed by installing a new baseband thing (don't fully understand it 3 using this: http://forum.xda-developers.com/showthread.php?t=1008070
EDIT: Can't get the new custom rom to install, tried deleting all the data from paranoid android and it still boots up as paranoid android. Please help!
you best bet is to do a full NVflash install then update using CWM,
try this following directions in the OP, http://forum.xda-developers.com/showthread.php?t=2007968
then update using topo's V30a.
the NVflash is a unbrickable solution. make sure you install the drivers for the phone you can get them in this pack http://forum.xda-developers.com/showthread.php?t=1975274&highlight=apx+drivers
then do the directions in Topo's OP and you should be running a pretty decent version of V30a.
let me know if you get stuck anywhere.
Hello necrowakker,
Thanks for your help, I've installed nvflash however I haven't a clue how to flash this rom using nvflash. I can't find the .bat file inside, only a boot.img and system.img file. I've downloaded version 1.1 of topogigi's rom and tried flashing with CWM 6.0.1.5 after doing a full data, cache and dalvik wipe but without any success.
Thanks again for your help!
hey guys i just rooted my Optimus 4x p880g
canadian WIND verison using this method
http://forum.xda-developers.com/showthread.php?t=1886460
after that i tried installing TWRP using this method
http://forum.xda-developers.com/showthread.php?t=2030777
but after i manually rebooted it after installing the apk i now get stuck at the WIND boot logo
I can still boot into stock recovery.
help is appreciated.
how do i get my phone back to stock or any ROM?
hi guys, i tried to unroot and restore my lg optimus 2x to his original settings. the problem is, i used a tutorial that had a Stock Data Backup. So ive done everything in the video, but when i finished and rebooted, the phone stucked at lg logo. I dont have anye recovery of mine because i deleted everything from the card. what can i do ? :/
if you want stock rom, without root/cwm you can flash a rom with smartflash.
HI,
Here's how I screwed up my optimus 2x, would be thankful, if someone can point me in the right direction.
1. Installed V30b over the weekend, which worked fine without any issues.
2. Rooted with CWM using NVflash
3. Found this very slow so yesterday tried to go back to gingerbread
4.Installed a modified V20s by Felix, which still kept it on the ICS
5.Used the V20Q release to do an offline upgrade using AIO
6.Phone stuck on LG logo
7. Tried flashing GB CWM didnt work
8.Tried smartflashing V20Q, didnt work
9.Used LG software to recover it, which installed v30b again
10. on boot dead lg bot would appear, no revoery possible
11.flased ICS CWM using NVflash,
12. stuck on boot loop.
Somewhere in the middle I also tried putting a bootloader, and also cleared dalvik cache. I forgot where I did that.
but seems like i have screwed it badly
seems like some sort of partition and bootloader problem
can anyone help me go back to ginger bread please.
AW: [Q] HELP, stuck in boot loop LG 2x
cipher233 said:
HI,
Here's how I screwed up my optimus 2x, would be thankful, if someone can point me in the right direction.
1. Installed V30b over the weekend, which worked fine without any issues.
2. Rooted with CWM using NVflash
3. Found this very slow so yesterday tried to go back to gingerbread
4.Installed a modified V20s by Felix, which still kept it on the ICS
5.Used the V20Q release to do an offline upgrade using AIO
6.Phone stuck on LG logo
7. Tried flashing GB CWM didnt work
8.Tried smartflashing V20Q, didnt work
9.Used LG software to recover it, which installed v30b again
10. on boot dead lg bot would appear, no revoery possible
11.flased ICS CWM using NVflash,
12. stuck on boot loop.
Somewhere in the middle I also tried putting a bootloader, and also cleared dalvik cache. I forgot where I did that.
but seems like i have screwed it badly
seems like some sort of partition and bootloader problem
can anyone help me go back to ginger bread please.
Click to expand...
Click to collapse
here buddy look in my thread there's a link providing a unbrick v10 ROM. Look here http://forum.xda-developers.com/showthread.php?t=2065451 just flash that and start over new with AOI tool
Sent from my LG-P990 using xda premium
cipher233 said:
HI,
Here's how I screwed up my optimus 2x, would be thankful, if someone can point me in the right direction.
1. Installed V30b over the weekend, which worked fine without any issues.
2. Rooted with CWM using NVflash
3. Found this very slow so yesterday tried to go back to gingerbread
4.Installed a modified V20s by Felix, which still kept it on the ICS
5.Used the V20Q release to do an offline upgrade using AIO
6.Phone stuck on LG logo
7. Tried flashing GB CWM didnt work
8.Tried smartflashing V20Q, didnt work
9.Used LG software to recover it, which installed v30b again
10. on boot dead lg bot would appear, no revoery possible
11.flased ICS CWM using NVflash,
12. stuck on boot loop.
Click to expand...
Click to collapse
This is wrong in some many levels... ok not to worry anything can be fixed, bricked doesnt exist anymore,
1.- dowload a rom in .zip format that uses the NEW BOOTLOADER / ICS bootloader / Unlocked bootloader, its important, no old bootloader or GB bootloader, the V30b rom is a good one
2.- Use AIO Tools and select 4 and select new layout
3.- Use AIO Tools and select 8 and select the new bootloader
4.- Now the phone reboots and CWM shows on screen, select flash from external SD card or Internal SD card, find your rom in .zip extension/format and select it, will be flashed (means installed), now reboot
5.- enjoy.
LG optimus 2x p990 stuck in bootloop
Deal All,
i am new to XDA and having issue with my LG O2x.
I had manged to upgrade LG O2x on ICS and it was running fine, but last Saturday i tried to check update via LG update tool, it says update available, when respective file download completed, O2x started in boot-loop.
I am not able to figure out what went wrong and how to solve it ?
As i was not prepared all so no backup of ROM, no developer mode ON and top of that i am not able to get into recovery mode by precessing volume down + Power button.
i can only enter in software upgrade mode, can anyone help me out ?
Thanks in advance !
Rajesh
Check out AIO tool under stickies. Read first post carefully and you should be fine
Try to flash via smartflash a GB stock rom or Ics
Wysłane z mojego LG-P990 przy użyciu Tapatalka
LG optimus 2x p990 stuck in bootloop
thanks for all your advice !
I got success when i flashed to GB. I figured out what was wrong.
i just put battery when phone is in software upgrade mode & it worked.
Rajesh
Wysłane z mojego Xperia Arc S przy użyciu Tapatalka