Ok, I know this is not the dev section, but I still haven't done the 10-posts rule. So, I am going to post my problem here and see how it goes.
Here it is
I have the previous PAC rom from nims11(http://forum.xda-developers.com/showthread.php?t=1911478) And running great.
Yesterday I tried to upgrade to the 4.2 PAC rom from OldDroid(http://forum.xda-developers.com/showthread.php?t=2141770), and it is failing. The flashing seems to be done successfully, but when it comes to booting, after the bootanimation it get errors like "Setup Wizard has stopped" and it doesn't open at all.
I tried re-flashing, wiping everything, re-downloading in case the dl was corrupted, even reflashing the kernel. But nothing.
Any thoughts?
Try my flashing method
boot to recovery
wipe data
wipe cache
wipe dalvik cache
wipe battery stats(if u want)
go to mounts and storage menu in Recovery
format /system
Install Zip From SD card and flash The ROM
after flashing gets over just reboot the phone.
I think this may solve your problem.
AK47 said:
Try my flashing method
boot to recovery
wipe data
wipe cache
wipe dalvik cache
wipe battery stats(if u want)
go to mounts and storage menu in Recovery
format /system
Install Zip From SD card and flash The ROM
after flashing gets over just reboot the phone.
I think this may solve your problem.
Click to expand...
Click to collapse
Seems like it worked. I wasn't formating the system before flashing. Never did, and i am changing rom every month or so.
Thanks anyway!
Related
This concerns my galaxy note n7000. I had a rooted checkrom v4 working on my note. I tried to install criskelorom v2 and got bootloops. I then tried to go back to stock via odin and flashed stock N7000 KL3 ROM which i had earlier used, I had to go to stock because after bootloop even recovery was not working. now after flashing stock i am getting a strange problem of the phone getting stuck at the welcome to gt-n7000 screen . "touch the android to begin" . nothing is happening after touching the android on the screen although i can change the language etc and even the pull down notification is also working but the phone is stuck at the initial stage. I have a nandroid backup of my initial checkrom in my internal sd card but cannot restore it before installing a rom with root and cwm. Kindly help . Thanks.
I'm having the exact problem. I'm hoping we can create a soft brick sticky thread. I walked away from my phone last night because I was getting frustrated.
My attempts to flash stock ROM via Odin resulted in the "not responding" message in windows. I can get to both CWM and download mode, however any ROM flashed via CWM results in the behavior described by the OP. fortunately I have access to another Samsung phone, so I can double check driver installation (although it worked for flashing previously).
I'm continuing a search through the forums to find some alternate methods for unbricking. Hope someone has an idea.
Thanks!
It seems that the stock roms i was trying to flash were nonwipe ones so i flashed xxla3 which is a wipe rom and was able to boot . I then flashed the earlier kl3 rom over this rom because kl3 is rootable. I then rooted and installed cwm booted into recovery and restored my earlier nandroid backup. I think the situation arises because the nonwipe rom was unable to clear the cache , user data etc
Thank you for the information. I had exactly the same problem. What did you use to root KL3 ?
Just wipe both cash and user data, and reboot.
reboot to recovery mode -> mount and storage -> format system, format cache, format data.
and do a factory reset and wipe cache.
problem should be solved cause that's what i did
Flo1389 said:
Just wipe both cash and user data, and reboot.
Click to expand...
Click to collapse
Thanks
liewkingyan said:
reboot to recovery mode -> mount and storage -> format system, format cache, format data.
And do a factory reset and wipe cache.
Problem should be solved cause that's what i did
Click to expand...
Click to collapse
daaamnnn!!! I'm scared to dead because of this!! Thanks dude!!!, no more **** ass ics
I had an issue like this once or twice.
http://www.youtube.com/watch?v=L5XjF6sPef4
This skips the that screen. then I cleared some things like google framework and it all was peachy
But its not wroking for me
I've majorly screwed up. I'm using a samsung galaxy ace s5830. After partioning my sd card I found that I couldn't root my phone since cwm was not allowing it. So I got frustrated and did a factory reset. Now my phone will not get passed the samsung intro and the blinking samsung sign. Please help
Reflash a rom with odin, it will wipe anything wrong (just remember to wipe data, wipe cache, and wipe dalvik cache)
Thanks will do so. can you shed some light as to how a simple factory reset got me into a boot loop
sjg2797 said:
Thanks will do so. can you shed some light as to how a simple factory reset got me into a boot loop
Click to expand...
Click to collapse
After wipe data/factory reset, bootloops can be solved by wiping cache and dalvik cache.
If something got messed in the kernel while trying to flash the root zip, then wiping everything will still keep an error, maybe that's what caused the bootloop, this is fixed with a fresh odin flash.
Check that your root zip is compatible and thay you use the correct recovery to flash it (sometimes it must be done through stock recovery, sometimes through cwm)
Hi all,
Got a strange problem.. I'm using Nik project x v4.1 with .11 radio...today i got poor network signal, so I flashed radio again n it's working fine.
Then I planned to flash xcs kernel 2.2 and faceunlock for this Rom.
When I am recovery, I got message like. "You are in safe mode, please wipe cache. If u flashed hboot.img then format system"
I took nandroid and
1. fixed permission
2. Wiped cache
3. Format system
4. Flashed both zip files
When everything got over and upon clucking power menu->reboot got alert
"You are In safe mode. Unable to access system partitions. Please format system partition except sd. Reboot in recovery. Yes or no"
I clicked no and followed steps to install new Rom (wipe data factory, wipe cache n dalvik, format system, format partition except sd )restored my nandroid backup and again got same message that
"You are In safe mode. Unable to access system partitions. Please format system partition except sd. Reboot in recovery. Yes or no"
Please help me. Worrying that my mobile will be bricked. Please guide me to get rid off this..
Edit: I clicked reboot and my mobile booted normally. But under power menu, on clicking reboot, got into same problem. Please help me to avoid this. Worry something wrong in my mobile!!
Cyb0rgz said:
Hi all,
Got a strange problem.. I'm using Nik project x v4.1 with .11 radio...today i got poor network signal, so I flashed radio again n it's working fine.
Then I planned to flash xcs kernel 2.2 and faceunlock for this Rom.
When I am recovery, I got message like. "You are in safe mode, please wipe cache. If u flashed hboot.img then format system"
I took nandroid and
1. fixed permission
2. Wiped cache
3. Format system
4. Flashed both zip files
When everything got over and upon clucking power menu->reboot got alert
"You are In safe mode. Unable to access system partitions. Please format system partition except sd. Reboot in recovery. Yes or no"
I clicked no and followed steps to install new Rom (wipe data factory, wipe cache n dalvik, format system, format partition except sd )restored my nandroid backup and again got same message that
"You are In safe mode. Unable to access system partitions. Please format system partition except sd. Reboot in recovery. Yes or no"
Please help me. Worrying that my mobile will be bricked. Please guide me to get rid off this..
Edit: I clicked reboot and my mobile booted normally. But under power menu, on clicking reboot, got into same problem. Please help me to avoid this. Worry something wrong in my mobile!!
Click to expand...
Click to collapse
When you formatted the /system partition, you wiped out Nik's ROM and then you only flashed a new kernel and a patch. That is why it you get the Unable to access system partitions.
You need to flash Nik's ROM again, then flash the kernel and then flash the patch.
tpbklake said:
When you formatted the /system partition, you wiped out Nik's ROM and then you only flashed a new kernel and a patch. That is why it you get the Unable to access system partitions.
You need to flash Nik's ROM again, then flash the kernel and then flash the patch.
Click to expand...
Click to collapse
Thanks tpbklake. Before formatting systems partition, I have taken nandroid backup. I restored nandroid but after that too, I got same alert.
Ok, I'll start from beginning. After flashing Nik Rom again, can I restore data.img from my nandroid.?
When I am recovery, I got message like. "You are in safe mode, please wipe cache. If u flashed hboot.img then format system"
Click to expand...
Click to collapse
Do you have any idea on this? I got this before flashing anything.
Cyb0rgz said:
Thanks tpbklake. Before formatting systems partition, I have taken nandroid backup. I restored nandroid but after that too, I got same alert.
Ok, I'll start from beginning. After flashing Nik Rom again, can I restore data.img from my nandroid.?
Do you have any idea on this? I got this before flashing anything.
Click to expand...
Click to collapse
You changed the radio. Either gb -> ics or ics -> gb and this causes some change in the partition layout that's why recovery is asking you to format. What I don't understand is why you didn't just format the cache partition like it told you to. It would have saved us all some time.
Nonverbose said:
You changed the radio. Either gb -> ics or ics -> gb and this causes some change in the partition layout that's why recovery is asking you to format. What I don't understand is why you didn't just format the cache partition like it told you to. It would have saved us all some time.
Click to expand...
Click to collapse
I haven't changed the radio of two different versions. Earlier I was in ICS radio .11M and again flashed the same ICS radio..11M) Yes, I did cache format as well as instructed.
While flashing radio which supports same OS version, am I need to wipe cache or its not required?
Cyb0rgz said:
I haven't changed the radio of two different versions. Earlier I was in ICS radio .11M and again flashed the same ICS radio..11M) Yes, I did cache format as well as instructed.
While flashing radio which supports same OS version, am I need to wipe cache or its not required?
Click to expand...
Click to collapse
If that's what the recovery is telling you to do, I would be inclined to agree.
Hi
A few days ago I was using my phone normally when he suddenly caught, well it was already quite normal to happen however I tried to turn it back and he did not call so I went in Recovery mode and tried using Data Wipe only he then caught Recovery tried using Odin and put the Original Rom but it always hangs on the Wipe Data I no longer know what to do does anyone help me please?
I have looked in my country (Brazil) forums but found nothing so hopefully you can help me from XDA
Sorry for my bad english I used Google Translate
after odin flashing process has done. do full wipe (wipe data wipe cache) then reboot.
dzeig said:
after odin flashing process has done. do full wipe (wipe data wipe cache) then reboot.
Click to expand...
Click to collapse
But the Recovery Mode lock in the Wipe Data
bruno13melo said:
But the Recovery Mode lock in the Wipe Data
Click to expand...
Click to collapse
You can install a new recovery (CWM or TWM). Than you will can do wipes.
Give me thanx please if I helped.
@alexissuper > Please don't be tell people wrong things. You CAN wipe data even with stock recovery. The wipe data function is available in all recovery mode. Flashing new recovery won't solve any problem.
So I think sdcard may cause this problem, format sdcard or partition it. Report back when the problem solved or persisted.
F4uzan said:
@alexissuper > Please don't be tell people wrong things. You CAN wipe data even with stock recovery. The wipe data function is available in all recovery mode. Flashing new recovery won't solve any problem.
So I think sdcard may cause this problem, format sdcard or partition it. Report back when the problem solved or persisted.
Click to expand...
Click to collapse
My SD Card has been replaced and not changed anything, I've tried without the card too and nothing has changed, and when I had the CWM it also fought in wipe data
Again sorry for my english D
i'm currently on this ROM http://forum.xda-developers.com/showthread.php?t=2398003 and I wanted to try something else..
I have cwm 6.0.0.8 after wiping data/ factory reset> wipe cache partition>wipe dalvik cache> flash this ROM http://forum.xda-developers.com/showthread.php?t=2562336
after rebooting, it just bootloops. Can someone tell me what I did wrong and what I need to do to get it right?
binkyubk said:
i'm currently on this ROM http://forum.xda-developers.com/showthread.php?t=2398003 and I wanted to try something else..
I have cwm 6.0.0.8 after wiping data/ factory reset> wipe cache partition>wipe dalvik cache> flash this ROM http://forum.xda-developers.com/showthread.php?t=2562336
after rebooting, it just bootloops. Can someone tell me what I did wrong and what I need to do to get it right?
Click to expand...
Click to collapse
well, since the CM10.1 installs the system files in a different directory [different than 4.1.2 or older directory]
you have to do a full wipe [format /system , format /data , format /cache] from the mount and unmount section in the CWM
before you flash the ICS rom, it doesn't matter which version of CWM you're flashing the ROM from.
hope this would help