Database Develop

Is this eBay case any good?

http://cgi.ebay.com/Leather-Carrying-Case-for-HTC-Advantage-X7500-X7501-New_W0QQitemZ180231674522QQihZ008QQcategoryZ20336QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
Just wondering if anyone's tried this case. It would be nice to know about the quality and fitting. I'm also very curious if that belt clip will last.
Thanks in advance!
J

hello,
I've not tried this case but I've had several with the plastic belt clip
and if you have a job that involves sitting a lot they can be fragile,
or if you do lots of manual work. I find the sewn belt loops flatter
and stronger. the krussel case is hard to beat
jay

Never used it, but i'm certain you'll soon be disappointed if you buy that case. IMO, a good case is an absolute must. You don't want your Athena falling off your hip when getting out of the car do you? This always happened with my old axim case with a plastic clip. Nutshell guarantees their case, including the steel clip or leather loop (whichever you get), for two years. Expensive though, but worth every penny to protect my athena.
http://tuff-as-nuts.com/index.asp?PageAction=VIEWPROD&ProdID=564

Actually, It'll probably end up in my pocket. I like those cases where you don't have to take them off to use the phone. That's why I was eyeballing this one.

skyungjae said:
Actually, It'll probably end up in my pocket. I like those cases where you don't have to take them off to use the phone. That's why I was eyeballing this one.
Click to expand...
Click to collapse
Just watch the screen. I once put my universal in a case in my trousers pocket, you guessed it the screen cracked! cost £100 to fix it. lord knows how much the athena's screen would cost, more than the machine is worth I guess.

I have one, the 2nd week the belt clip brike getting in the car. Not to mention the phone slipped right out from it twice, with my foot action as a cushion (broke a piece of th tab on the battery door) and the 2nd time was last week at the gas station. The cases are designed with crappy materials but with a bit of mod I saved mine from going into the garbage. I had to cut the back open and put a piece of plastic in it for more support against it flopping. I used a hot air gun to soften the side holders and bend them in slightly for a more snugged fit. At the end of all that the next morning I broke the plastic tab on the case going into the car. Now I still have the case using but only because I've not finished mounting the belt clip on the OEM case as yet, as i've already already cut a caller display into the case and used that strip to make a leather flap to close it. Once I find a steardy belt clip I will post pictures of the mod. If I can't find one strong enough that will not break I will go for a standard clip mounted back and stitched on for a better look.
Back to this clip, I would recommend getting it if you can do a little bit of mod on your own, but BE WARNED if you don't mod the rails on it, your liable to damage your device, when (i said when, because eventually it will) slide out.

See what I said about that ebay case, and what you should buy instead on my thread: http://forum.xda-developers.com/showthread.php?t=344605
Bottom line, run FAR, far away from that ebay case.

Tuff-as-Nuts now has an option to get a slightly larger Athena case that will accomodate the Athena+case (thanks to my having one special ordered one). You can now have it either way.
Brad Miter

Ebay Trash
I had the ebay case for one week before the clip broke. It is made of the cheapest, thinnest plastic I have ever seen. I have a Verizon phone from my employer that came with a clip similar to this one. Even though the Verizon phone is about 80% lighter than the Advantage, the clip that came with it has plastic three times thicker. After the Ebay clip broke, I started using the case with my Verizon clip. It took another week for the post on the case to break.
It is amazing how shoddy this design is. If you can get it on ebay for $3 (including shipping) I would get it, but only to use as a case. It will not survive on your belt.

LocoHarami said:
I It took another week for the post on the case to break.
It is amazing how shoddy this design is. If you can get it on ebay for $3 (including shipping) I would get it, but only to use as a case. It will not survive on your belt.
Click to expand...
Click to collapse
I bought this case recently (based on the similar device dimensions) and was quite pleased with it. I need a belt clip so I can always have both hands free. It adds a bit of bulk to the device but feels quite secure on the belt. I thought the case would be a tight-fit but the athena (+ keybd) feels just slightly loose in it which is good. I just push the edges upwards to eject. Worth the price I think.
http://cgi.ebay.co.uk/Leather-Case-...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
PS: Not related at all to seller,etc,etc. Just helping fellow travellers on the quest for decent belt-clip cases for athenas.

Abram said:
I bought this case recently (based on the similar device dimensions) and was quite pleased with it. I need a belt clip so I can always have both hands free. It adds a bit of bulk to the device but feels quite secure on the belt. I thought the case would be a tight-fit but the athena (+ keybd) feels just slightly loose in it which is good. I just push the edges upwards to eject. Worth the price I think.
http://cgi.ebay.co.uk/Leather-Case-...photoQQcmdZViewItemQQ_trksidZp1713.m153.l1262
PS: Not related at all to seller,etc,etc. Just helping fellow travellers on the quest for decent belt-clip cases for athenas.
Click to expand...
Click to collapse
A very good, protective black leather case. No belt clip.
http://cgi.ebay.co.uk/Book-Type-Lea...hash=item120199602780&_trksid=p3911.m14.l1318

Post 12 from wajiguqu0223 reported. Completely meaningless in the context of this entire board, and my guess is its a precursor to some major spam campaign.
edit: old post 12 has been deleted. Good. (which now makes this post 12, lol)

TPU Hybrid case with kickstand for Samsung Galaxy Note II (Review w/ Pics)

Once I got my T-Mobile Note 2, I searched the interwebs for a case that would protect the phone and make it less slippery. The quest was not an easy one, with barely any cases available, and most being replicas with different names. Additionally, none of the ones I saw offered protection around the corners, something that I find 100% essential on a case.
So after several hours on the general Galaxy Note II Accessories forum and several pages down the Amazon hole through multiple search keywords, I found the perfect case, for the time being. The case is a basic TPU S-line hybrid with an added kickstand. Nothing new or revolutionary, I'm sure, but given the lack of choices as of yet, a good one nonetheless.
The case protects, as commented, all 4 corners, and it protrudes enough that it lets you place the phone face down without suffering any damage on the screen. The kickstand works, though this is also the biggest caveat I've found.
The kickstand is on a hinge, and, to keep the case as thin as possible, the kickstand is embedded into the case. This wouldn't be such a problem, this happens on the Seidio Active, for example. However, the case is so thin that the hinges protrude too much out of the case, causing this to be the main point of contact with the surface when you place the phone on its back. It's irritating because one would hope a case would make the phone less slippery when placed on a surface than the original plastic, but hanging from two small pieces of plastic is not much better. There's always the placing the phone on its kickstand position, and that's fine, but don't think about pushing the phone hard on this position, or you'll cause the hinge to let you shift the phone to the "second" position, and, if pushed further, down to the ground.
The kickstand hasn't broken yet, but leaves uncertainty on how long it'll last. The black part of the case is grippy, specially on its sides, with the semi-see-through material being more slippery (though this is not an inconvenience, really).
All ports are well protected, but not covered, so no worries about echo issues like in other cases.
The kickstand is perfect for watching movies on the beautiful 5.5 inch screen.
The durability of the case is debatable. While I'm sure it'll withstand some falls, its purpose is more of a "now it'll not slip off my hands every time I pull it out of my pocket" than "let's toss this sucker from a 20 ft window"
This case more than serves its purpose, and at $5.98 including S&H (shipping from MN, USA), it should be in everyone's short list of capable though cheap cases.
If your phone is naked awaiting a case that fits your immediate needs, this will suffice. If you're looking for something that protects better, is more elegant, and of a known brand, the Seidio Active with Metal Kickstand is my #1 choice. But meanwhile, until it is released, I'd rather have this $6 case than go "naked".
I'm waiting for Amazon to accept all my images that I uploaded so I can provide you with images.
In the meantime, you can check out my Amazon Review here.
>>> It comes on either Black, Blue, Pink, Purple, White. I think I've also seen red, and I'm sure you can also find it on eBay.
>>> Black one seems to be "Unavailable".

Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...

BrokenPixel said:
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
Click to expand...
Click to collapse
Yeah I tried to do it so that the selling company was located in the US, just so it wouldn't take so long to arrive because I was holding the phone naked and it was slippery as hell.
The screen protector is a SPIGEN SGP Samsung Galaxy Note 2 Screen Protector Clear Steinheil [Ultra Oleophobic] [2-PACK]
Personally, I don't think the protector is the best, but I feel more comfortable about using my phone now. The safer the better. I got a scratch on my S2 with Gorilla Glass, because I figured "oh Gorilla Glass...don't need a protector". I tried to put protector when I first got it, but failed on 3 accounts. It just didn't look good. Wore it for a while till it looked even worse and I just simply removed it. And of course... Sh*t happens.
So this time, I ordered protector same time as case. Except it is fulfilled by Amazon so it took 2 days free shipping. I think the price is high, AND I have 2-3 bubbles that don't go away. Really, they aren't bubbles. They're specks of dust, and the surrounding area does not stick to the screen. I've thought about using the second protector but...uh I don't know.
"But it's Gorilla Glass 2, you don't need protector!" Not gonna fall twice for that. "But it's gonna interfere with the S Pen!" You know what, I think from time to time it does interfere. I've noticed sometimes while drawing that I might lift the pen but it still draws on the screen. Not sure if that's due to the screen protector or not...
Anyway, best of luck. Protect your phone with the first thing you find in the meantime until you get your case!

i see there's a minor bump on the kickstand that prevents the phone from laying perfectly flat on it's back. Is there' a slight wobble to it if you lay it flat and touch one side?

I just got this case in today and Im happy with what I got for the money.
Sent from my SPH-L900 using XDA Premium HD app

well....
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!

yusssi said:
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
Click to expand...
Click to collapse
yeah I tried that with my GS3 it was too ghetto for me lol

Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand

....
fatboypup said:
yeah I tried that with my GS3 it was too ghetto for me lol
Click to expand...
Click to collapse
Hahahaha!! I know!!!

one80oneday said:
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
Click to expand...
Click to collapse
It really is thin. This may not be the best for you, but I'd say just because of the kickstand, it may hold you over until you find a better one. Personally looking forward to Trident Aegis and Seidio Active. There's also Otterbox...

I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app

jamexman said:
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Sorry, can't help you there. I really had no problem whatsoever putting this one in. I've taken it out about a dozen times, and I've never had issues taking it out or putting it back in. I ordered the Seidio Active case, so this one will be retired soon. But while using it, my only complaint was that the stand was not reliable. That's about it.
You might want to contact the seller and get a replacement. Looks like there's something wrong with yours. Also, make sure that all ports/buttons line up, and that they didn't send you the case for the wrong phone or some such.
Good luck!

This case is "unavailable" on Amazon but there are a million of them on Ebay, in all different colors. I got one in clear because I like to show off my phone, not the case, although I know from my old iPod case that I actually like the look of a clear glass-like edge around the sides.
I just wanted to chime in that if you get the clear version, beware that it *will* stick to the back cover of the phone. It's ugly because you get these big blobs and patches, and I found it immediately unacceptable. The case only cost me $5 so I just tried sanding it down on the inside so it wouldn't stick... which technically worked, but now it's even uglier. Yeah, I ruined it, but I couldn't see using it the way it was before. I was also concerned that over time, it'd stick so hard that I wouldn't be able to get it off. Already, whenever I'd take it off, I'd hear a "crack" as it unstuck from the back cover. I'm actually still using it after the sanding and it works just fine and doesn't stick anymore, but it is ugly.
My advice is to get a solid color version of this case if you get one, and still sand the inside of it so it doesn't stick. (Though make sure it's really opaque if you sand it; if it's clear at all, you'll see sanding marks.)
I really like kickstand cases but I'm thinking now of just getting something that gives me a little better grip on the phone (like a textured back cover) and then either not getting a case at all, or getting another one of these and hoping it doesn't stick to a more matte back cover.

for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too

Pyr0x64 said:
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Click to expand...
Click to collapse
U have this one? How is it like? The photo doesn't clarify a lot..
Thx
Sent from my GT-N7100 using xda premium

No, I don't have one sorry.
I just spotted it on ebay last night and thought I would post it here as an alternative for people to consider when I saw the thread earlier
I do have it in my watchlist and may purchase later, but at the moment I'm using a FlyGrip and a plain matt tpu case

The kickstand looks a bit more flush on that one. Does not seem like there is much texture in the TPU for grip though. I will let someone else be the guinea pig, but I am curious to hear about it.
Sent from my Obamaphone using Tapatalk.

Me too, I'm very curious about this case...
Sent from my GT-N7100 using xda premium

They have that one in clear now too.
It looks frosted so it probably just has a matte texture that makes it easier to grip.
I found another clear TPU case similar to the first kickstand one but minus the stand and with all 5-star reviews on Amazon... found the same case on Ebay for cheaper (under 5 bucks) so I'm trying that next. If that one still creates unsightly stickiness, I'll just go for a clear hard plastic case. I've used one of those on my iPod for literally 5 years and they are surprisingly effective and look perfect.

LOL. I ordered the clear one to try out. I am so weak and have no will power.
Sent from my Obamaphone using Tapatalk.

Best Buy Branded Platinum

So I picked a platinum case which seems like a re-branded Seidio, so it's not a bad case at all.
I have a concern and I did do some googling on Cell Phones and Flash Memory with magnetic fields. I've always been a firm believer you don't mix magnets and electronics. Everything I've read says it won't hurt anything with the flash memory nor the phone itself. My personal experience says otherwise. I had a magnetic pouch for once my for Samsung A990 and it caused weird screen discoloration when removed from the case. I also have had experience with another device and magnets. Two difference cases I bought for my Acer A100 which ended causing issues as well.
So really is it a good idea to keep a case with a magnet powerful enough to snap to my fridge around my phone?

Plenty of folks around here have been using a Platinum series or Surface since the day they came out without any ill effects. I've got a Platinum series case and I use it frequently, but I'll admit to using a TPU or folio-style case more often than not at home purely because I am very, very mildly concerned about the magnet. That said, it hasn't caused any distortion on my screen or anything like that.

Not an issue. Make sure to turn off under s-pen setting pwr management pen detection (when s-spen is in a holder or not) to avoid any issues with magnet interference.
Btw, I just got Seidio CONVERT which is Surface/Platinum with an extra protection shell on top of it. Just tested it out, took a ton of pictures, and will post a detailed review in a day or so. VERY IMPRESSIVE case. Defender was rushed in with lots of design faults. This one is a design perfection! And actually already sold out at Amazon where you can get it for $55 (which is actually 2 cases in a package, Surface and Convert kit on top of it). But anyway, expect a detailed review!!!

It really depends on the type of magnet and its strength if it will hurt electronics or not. I can't remember which ones are safe to use off the top of my head but a quick google search should turn up the answer. I know they are more expensive than a regular magnet so most (all?)cheap cases don't use them, but mid - highend cases *should* use them. I think it's a special kind of low strength neodymium magnet that doesn't effect electronics, but I'm not 100% positive on that. The magnet should be just powerful enough to hold the weight of the closure shut against gravity, but not strong enough to hold the closure shut against the weight of the device + gravity. So definitely no refrigerator magnets unless they are only designed to hold a sheet of paper and anything heavier will drag it down to the floor.
I like to break stuff!

Thanks! After my post I did a little more digging and found that some people seem to believe there is a dead spot with the spen even with the Seidio. I did my own experiment and noticed that the magnet is strong enough to hold a precision screw driver against it while I jiggled it. The screen responded to the magnet when held right up against it. I realize that I am not going to be holding it next to the screen daily or holding screw drivers. I ended up mixing the cheap Verizon cover with the holster and it seems to work well enough. I only planned on using the holster when I wear jeans anyway. plenty of room in dress pants.

vectron said:
Not an issue. Make sure to turn off under s-pen setting pwr management pen detection (when s-spen is in a holder or not) to avoid any issues with magnet interference.
Btw, I just got Seidio CONVERT which is Surface/Platinum with an extra protection shell on top of it. Just tested it out, took a ton of pictures, and will post a detailed review in a day or so. VERY IMPRESSIVE case. Defender was rushed in with lots of design faults. This one is a design perfection! And actually already sold out at Amazon where you can get it for $55 (which is actually 2 cases in a package, Surface and Convert kit on top of it). But anyway, expect a detailed review!!!
Click to expand...
Click to collapse
I love the Seidio CONVERT, i had the case for my Thunderbolt and they replaced it 3 times over the years due to breaks, cracks etc..

dms76 said:
Thanks! After my post I did a little more digging and found that some people seem to believe there is a dead spot with the spen even with the Seidio. I did my own experiment and noticed that the magnet is strong enough to hold a precision screw driver against it while I jiggled it. The screen responded to the magnet when held right up against it. I realize that I am not going to be holding it next to the screen daily or holding screw drivers. I ended up mixing the cheap Verizon cover with the holster and it seems to work well enough. I only planned on using the holster when I wear jeans anyway. plenty of room in dress pants.
Click to expand...
Click to collapse
I have a leather holster with 2 magnets that hold ot closed but the part where the phone is is shielded from the magnets by a sheet of aluminum sewn inbetween the leather panels. They also sewed one in the back panel as well to hold the shape of the holster as the leather is really soft. It makes a damn good holster, look and feel of soft leather and strength and protection of an aluminum box. And the aluminum doest affect signal as it actually has an antenna booster built into the aluminum plates. I actually get better signal near the holster. Although I can't remember where it came from since my dad originally bought it for the og note then ended up ordering a handmade one for like 200 $ and gave me this one. It has a sort of woven or carbon fiber texture to the leather. I'll get some pics of it later. The one issue it had was the belt clip wasnt riveted in so it came unstitched after a while of pulling it on and off, but I actually prefer using the belt loops on it now as it doesn't stick out as far anymore. Under a tshirt you can't even tell its there.
I like to break stuff!

Ive been using the best buy case since I got my note. I dont notice any spen interference. But I also only use the spen every so often.
Sent from my SCH-I605 using xda premium

Wouldn't magnet interfere with internal compass? Will it permanently affect it on long run?
Sent from my SGH-T889 using xda app-developers app

I use the Best Buy Branded Platinum since November and there is zero problems
with the phone, S-pen or the compass. I also have a holster with a magnet to
keep it close and I never seen any issue.
It looks like this phone is very well shielded...

Thank you everyone for your input
Sent from my A100 using Tapatalk 2

I have no problem whatsoever best buy platinum /sedio surface is VERY GOOD.
Sent from my SPH-L900 using xda app-developers app

http://www.amazon.com/gp/offer-listing/B00A45SFBM/ref=dp_olp_used?ie=UTF8&condition=used
Comes with the holster

Just a friendly FYI. Platinum is Seidio. The only difference is Seidio is the name on the product if you buy it online and Platinum is the name if you buy it at a store like Best Buy. Don't ask me why they have different names for the same products made by the same company, they just do lol.
Sent from my SPH-L900 using Tapatalk 2

premiatul said:
I use the Best Buy Branded Platinum since November and there is zero problems
with the phone, S-pen or the compass. I also have a holster with a magnet to
keep it close and I never seen any issue.
It looks like this phone is very well shielded...
Click to expand...
Click to collapse
Hi,
Which holster are you using?
Thanks,
Bryan

trapperjohn said:
Hi,
Which holster are you using?
Thanks,
Bryan
Click to expand...
Click to collapse
Some no name brand that I picked up at the mall.
Sent from my SGH-T889 using xda premium

Looking for a "grippy" protective case with non slip back

I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!

dengood1 said:
I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
Click to expand...
Click to collapse
http://www.amazon.com/Duzign-Sentin...1378141878&sr=8-3&keywords=duzign+case+note+2
This case has been discussed by many on this forum and it has good reviews. It is definitely protective and grippy. You can even tell from the back rubbery design. If you want something slim, with a soft matte feel, i'd get the Six Abundant Case: http://www.amazon.com/DBA-Cases-Abu...=1378141992&sr=8-1&keywords=six+abundant+case

Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

dengood1 said:
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
You're very welcome

opasha said:
You're very welcome
Click to expand...
Click to collapse
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app

dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
From all the reviews and things I have heard about it, it seems to be in the middle. A hard rubber. So it's good for shock absorption. Definitely not a soft rubber because that would wear out very easily. However, from what everyone in the forums have said and from the amazon reviews, it seems like it will stay in place without issue. Also, it's only $10 and from amazon. If you don't like it, you can ship it back the same day for a full refund without any cost to you. Just keep the original box/packaging.
Here's a quote from someone who has it: "The back part of the case (the black exterior) feels more like silicone than plastic which gives it a nice look and grip. I have dropped my phone once on this case and I have to say that this case does a very good job on absorbing impact."

dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.

Brad.S. said:
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Click to expand...
Click to collapse
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.

opasha said:
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
Click to expand...
Click to collapse
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?

Brad.S. said:
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Click to expand...
Click to collapse
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.

opasha said:
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
Click to expand...
Click to collapse
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.

Brad.S. said:
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Click to expand...
Click to collapse
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.

opasha said:
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
Click to expand...
Click to collapse
I never printed any cases for my Note 2, just the inserts for the UAG case with lettering and glow in the dark filament etc. I did make four cases for my gf's S3 but in the end she moved to a pink folio wallet case (which would take too much time to make haha). I've since then had two dead SD cards.. So I've lost a lot of pictures (backups are my priority every 24hrs now..). The cases were more of a "wow factor" type of thing. Everywhere we went people asked more about her case than my huge phone lol.. Lead to a lot of explanations of what a 3D printer is.. But After a few times on/off of the case they'd get weak and start to crack at random layers of which the printer printed it (our printer has a resolution of 0.001mm).
Started sanding the area of the Sentinel case today that I hacked out with the razor to make it smoother. Only had about ten minutes with some 1600grit paper, so I got one side pretty smooth!
I wanted to pledge money to the kreyos smart watch but got worried that I'd be stuck with money in the air for it and no item on my wrist until next summer.. The galaxy gear is definitely going to be watched (pun intended)! As long as it stays within $200-300..
As you can tell, it's hard for me to commit to some purchases lol!
To op: I remember seeing some peel & stick grip strips for phones. They were just thin clear gel-type adhesive strips. Been looking for them but can't find the review. Honestly, I'd also like a grippy case..
Edit: found it! www.egrips.com/ check it out.

Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app

dengood1 said:
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Try the DBA Cases Ultra protection cases very good quality and good feel
http://www.dbacases.com/samsung.html

I have the UAG case. I have used the UAG line of cases for all my phones and they are solid. They have the bevel in the front so if it drops face down you wont shatter your screen and it has extra cushion on the corner bumpers. They are only $30 - $35 online. They fit on my OEM samsung dock with spare batttery charger.
The reason why I trust all my phones in the UAG case is that my wife's nephew through my note down the escalator at the mall. My heart stopped as I saw it tumble and bounce off every step. When I went to get it, the phone and case didnt have a scratch on it. The otterboxes are great but they are way too big. Especially for our note.

I am using a cheap eBay tpu. Smoke clear and it is rubber. It works great and protects just fine. Best of all it was only a buck and a half! Rubber does a pretty decent job of keeping it from sliding around unless it is on something very slick. keeps good in the hand too
Sent from my kraken (Note2) using xda app

I have the body glove from sprint.
I feel it offers the best for daily use and it has pocketablility which is nice. It doesn't get hung up as it has a glossy surface at the bottom of the phone.

Review of iPulse Full Grain Leather Wallet

This type of leather wallet cases that you buy are a great way to save space in your pockets by combining your wallet and your phone into one. I received this "Real Full Grain Leather Wallet Case" and really enjoyed how well it was packed. It came in a iPulse bag, and once I removed it, it was again wrapped in some protective plastic. I placed my new Note 8 into the TPU slot where the phone goes, and it fits nice and snug. It a soft TPU type holder which isn't hard plastic and protects the phone also from scratches when inserting it. The wallet smells good too with that new Leather smell. The stitching is and looks hand done (unsure if it is), but it is all perfect. The leather has a soft feel too it. Cards fit snug in the slots. There is enough room for 2 credit cards, and license. A slot under them for money and other items. You maybe able to fit two cards per slot but I didn't try. Also, the magnet closer that holds the wallet closed has good strength to hold it well. I had no issues of it coming open.
Two areas of improvement I would recommend but more of a personal preference. It would be nice if it shuts off the phone screen like some of them do with magnets. Also, there is no cut out for the ear piece speaker so you have to keep the wallet open when talking on the phone.
Otherwise, a great wallet! Good job! Here are some nice pictures I took of the experience of unpacking it and putting my phone in it.
Link: https://www.ipulsecases.com/product...ian-full-grian-leather-flip-wallet-case-black

One note: In the video the guy states he has "a scratch on my phone already" because it's "wide open" at the bottom.
When in fact, the phone is not scratched at all. The case it pops into is. I thought that was kinda funny.

actually all this kind case needs no holes for the earpiece, just turn the volume to the max, imageine there is hole, and talk with case closed

Fuyuanhuihaoxiao said:
This type of leather wallet cases that you buy are a great way to save space in your pockets by combining your wallet and your phone into one. I received this "Real Full Grain Leather Wallet Case" and really enjoyed how well it was packed. It came in a iPulse bag, and once I removed it, it was again wrapped in some protective plastic. I placed my new Note 8 into the TPU slot where the phone goes, and it fits nice and snug. It a soft TPU type holder which isn't hard plastic and protects the phone also from scratches when inserting it. The wallet smells good too with that new Leather smell. The stitching is and looks hand done (unsure if it is), but it is all perfect. The leather has a soft feel too it. Cards fit snug in the slots. There is enough room for 2 credit cards, and license. A slot under them for money and other items. You maybe able to fit two cards per slot but I didn't try. Also, the magnet closer that holds the wallet closed has good strength to hold it well. I had no issues of it coming open.
Two areas of improvement I would recommend but more of a personal preference. It would be nice if it shuts off the phone screen like some of them do with magnets. Also, there is no cut out for the ear piece speaker so you have to keep the wallet open when talking on the phone.
Otherwise, a great wallet! Good job! Here are some nice pictures I took of the experience of unpacking it and putting my phone in it.
Link: https://www.ipulsecases.com/product...ian-full-grian-leather-flip-wallet-case-black
Click to expand...
Click to collapse
This is an excellent case. Form, fit and finish are excellent. The TPU will protect against side scratches, but like most leather cases, the impact drop protection is not great-and certainly not Milspec rated. However, the magnetic latch and leather edges offer some drop/scratch protection.
Sent from my SM-N950U using Tapatalk

I've found leather wallets to be great for drop protection and I've never broke a screen in one. I know it's happened and it doesn't mean I cant or wont but I've gone through a lot of phones and a lot of these style cases and they've all taken a few drops without damage. I do agree they are not the best possible protection but I'd say they're a fair bit better than the average case.

krabman said:
I've found leather wallets to be great for drop protection and I've never broke a screen in one. I know it's happened and it doesn't mean I cant or wont but I've gone through a lot of phones and a lot of these style cases and they've all taken a few drops without damage. I do agree they are not the best possible protection but I'd say they're a fair bit better than the average case.
Click to expand...
Click to collapse
This one does a great job about protection.
The magnetic closure keeps it closed all the time, so dropping is never a problem for me.
FYI, I DO INSTALL GLASS SCREEN PROTECTOR

Anyone have advice on how to run the shiney leather to suede on these cases. ? I'm thinking wet and dry sandpaper or wire wool perhaps.
Sent from my SM-N950U using Tapatalk

Not to worry , used scotch pad and alcohol worked a treat.
Sent from my SM-N950U using Tapatalk

Gave the case an aged look. LOL

Pic 2

Limeybastard said:
Pic 2
Click to expand...
Click to collapse
why dont you go and get a suede leather?
The case is torched like helk

dallasmanic said:
why dont you go and get a suede leather?
The case is torched like helk
Click to expand...
Click to collapse
As I mentioned a few months ago the suede one looks like a book which I didn't like. Now, this one feels like suede and the right color for me. Also, since the sheen has gone, it's going to age better with staining and what not. Grips and feels good also
Sent from my SM-N950U using Tapatalk

Limeybastard said:
As I mentioned a few months ago the suede one looks like a book which I didn't like. Now, this one feels like suede and the right color for me. Also, since the sheen has gone, it's going to age better with staining and what not. Grips and feels good also
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
I like how you care about doing it by yourself.
Man, you rock

dallasmanic said:
I like how you care about doing it by yourself.
Man, you rock
Click to expand...
Click to collapse
Indeed.
Sent from my SM-N950U using Tapatalk

Limeybastard said:
Indeed.View attachment 4384717View attachment 4384718
Sent from my SM-N950U using Tapatalk
Click to expand...
Click to collapse
can you age one for me? i can pay you

dallaslaventurasucks said:
can you age one for me? i can pay you
Click to expand...
Click to collapse
I'll do it for free. Just pay postage.
Sent from my SM-N950U using Tapatalk