So I picked a platinum case which seems like a re-branded Seidio, so it's not a bad case at all.
I have a concern and I did do some googling on Cell Phones and Flash Memory with magnetic fields. I've always been a firm believer you don't mix magnets and electronics. Everything I've read says it won't hurt anything with the flash memory nor the phone itself. My personal experience says otherwise. I had a magnetic pouch for once my for Samsung A990 and it caused weird screen discoloration when removed from the case. I also have had experience with another device and magnets. Two difference cases I bought for my Acer A100 which ended causing issues as well.
So really is it a good idea to keep a case with a magnet powerful enough to snap to my fridge around my phone?
Plenty of folks around here have been using a Platinum series or Surface since the day they came out without any ill effects. I've got a Platinum series case and I use it frequently, but I'll admit to using a TPU or folio-style case more often than not at home purely because I am very, very mildly concerned about the magnet. That said, it hasn't caused any distortion on my screen or anything like that.
Not an issue. Make sure to turn off under s-pen setting pwr management pen detection (when s-spen is in a holder or not) to avoid any issues with magnet interference.
Btw, I just got Seidio CONVERT which is Surface/Platinum with an extra protection shell on top of it. Just tested it out, took a ton of pictures, and will post a detailed review in a day or so. VERY IMPRESSIVE case. Defender was rushed in with lots of design faults. This one is a design perfection! And actually already sold out at Amazon where you can get it for $55 (which is actually 2 cases in a package, Surface and Convert kit on top of it). But anyway, expect a detailed review!!!
It really depends on the type of magnet and its strength if it will hurt electronics or not. I can't remember which ones are safe to use off the top of my head but a quick google search should turn up the answer. I know they are more expensive than a regular magnet so most (all?)cheap cases don't use them, but mid - highend cases *should* use them. I think it's a special kind of low strength neodymium magnet that doesn't effect electronics, but I'm not 100% positive on that. The magnet should be just powerful enough to hold the weight of the closure shut against gravity, but not strong enough to hold the closure shut against the weight of the device + gravity. So definitely no refrigerator magnets unless they are only designed to hold a sheet of paper and anything heavier will drag it down to the floor.
I like to break stuff!
Thanks! After my post I did a little more digging and found that some people seem to believe there is a dead spot with the spen even with the Seidio. I did my own experiment and noticed that the magnet is strong enough to hold a precision screw driver against it while I jiggled it. The screen responded to the magnet when held right up against it. I realize that I am not going to be holding it next to the screen daily or holding screw drivers. I ended up mixing the cheap Verizon cover with the holster and it seems to work well enough. I only planned on using the holster when I wear jeans anyway. plenty of room in dress pants.
vectron said:
Not an issue. Make sure to turn off under s-pen setting pwr management pen detection (when s-spen is in a holder or not) to avoid any issues with magnet interference.
Btw, I just got Seidio CONVERT which is Surface/Platinum with an extra protection shell on top of it. Just tested it out, took a ton of pictures, and will post a detailed review in a day or so. VERY IMPRESSIVE case. Defender was rushed in with lots of design faults. This one is a design perfection! And actually already sold out at Amazon where you can get it for $55 (which is actually 2 cases in a package, Surface and Convert kit on top of it). But anyway, expect a detailed review!!!
Click to expand...
Click to collapse
I love the Seidio CONVERT, i had the case for my Thunderbolt and they replaced it 3 times over the years due to breaks, cracks etc..
dms76 said:
Thanks! After my post I did a little more digging and found that some people seem to believe there is a dead spot with the spen even with the Seidio. I did my own experiment and noticed that the magnet is strong enough to hold a precision screw driver against it while I jiggled it. The screen responded to the magnet when held right up against it. I realize that I am not going to be holding it next to the screen daily or holding screw drivers. I ended up mixing the cheap Verizon cover with the holster and it seems to work well enough. I only planned on using the holster when I wear jeans anyway. plenty of room in dress pants.
Click to expand...
Click to collapse
I have a leather holster with 2 magnets that hold ot closed but the part where the phone is is shielded from the magnets by a sheet of aluminum sewn inbetween the leather panels. They also sewed one in the back panel as well to hold the shape of the holster as the leather is really soft. It makes a damn good holster, look and feel of soft leather and strength and protection of an aluminum box. And the aluminum doest affect signal as it actually has an antenna booster built into the aluminum plates. I actually get better signal near the holster. Although I can't remember where it came from since my dad originally bought it for the og note then ended up ordering a handmade one for like 200 $ and gave me this one. It has a sort of woven or carbon fiber texture to the leather. I'll get some pics of it later. The one issue it had was the belt clip wasnt riveted in so it came unstitched after a while of pulling it on and off, but I actually prefer using the belt loops on it now as it doesn't stick out as far anymore. Under a tshirt you can't even tell its there.
I like to break stuff!
Ive been using the best buy case since I got my note. I dont notice any spen interference. But I also only use the spen every so often.
Sent from my SCH-I605 using xda premium
Wouldn't magnet interfere with internal compass? Will it permanently affect it on long run?
Sent from my SGH-T889 using xda app-developers app
I use the Best Buy Branded Platinum since November and there is zero problems
with the phone, S-pen or the compass. I also have a holster with a magnet to
keep it close and I never seen any issue.
It looks like this phone is very well shielded...
Thank you everyone for your input
Sent from my A100 using Tapatalk 2
I have no problem whatsoever best buy platinum /sedio surface is VERY GOOD.
Sent from my SPH-L900 using xda app-developers app
http://www.amazon.com/gp/offer-listing/B00A45SFBM/ref=dp_olp_used?ie=UTF8&condition=used
Comes with the holster
Just a friendly FYI. Platinum is Seidio. The only difference is Seidio is the name on the product if you buy it online and Platinum is the name if you buy it at a store like Best Buy. Don't ask me why they have different names for the same products made by the same company, they just do lol.
Sent from my SPH-L900 using Tapatalk 2
premiatul said:
I use the Best Buy Branded Platinum since November and there is zero problems
with the phone, S-pen or the compass. I also have a holster with a magnet to
keep it close and I never seen any issue.
It looks like this phone is very well shielded...
Click to expand...
Click to collapse
Hi,
Which holster are you using?
Thanks,
Bryan
trapperjohn said:
Hi,
Which holster are you using?
Thanks,
Bryan
Click to expand...
Click to collapse
Some no name brand that I picked up at the mall.
Sent from my SGH-T889 using xda premium
Related
Does the case-mate for the nexus s crack after a month? What is the best case for the nexus s? I am looking for one similar to a impact soft shell case...Thanks
aspirex said:
Does the case-mate for the nexus s crack after a month? What is the best case for the nexus s? I am looking for one similar to a impact soft shell case...Thanks
Click to expand...
Click to collapse
I've had mine for about a month now, and its been holding up fine so far. But then again, I don't usually abuse my phone.
I've had mine since September and it's great, no issues.
Sent from my Nexus S using xda premium
i used to use a tpu case for mine but it kept triggering the bug report thing by pressing both volume keys and the power button whenever i woke up the phone. i stopped using it and realized i dont really need a case for it. ive dropped it a couple times and surprisingly nothing happened. the back does get scratched but im willing to live with that.
I have a case mate as wel and happy with it!
I use mercury hard gel case. I like the fact that it doesn't cover the buttons and still provides good drop and scratch protection
Sent from my Nexus S using XDA
I've used CaseMate POP case but i think it's a bad case. I don't like POP case. Now i'm using a Momax iCase & it's a great case.
Sent from my Nexus S using XDA
I have been using the Case-Mate POP case for about 6 months. It has been great protection and even some added girth for my rather large hands. I have one or two cracks, but that is from me constantly taking the phone in and out of the case to un-brick or flash or something else that would require a battery pull. The other aesthetic note is the rubber around the edge (keeps the phone in the case as well as provides a bit of grip when placed on a table face down) is a bit worn. It doesn't look terrible but its there.
Overall the case is amazing, and people who say its bad had a bad experience with it and/or broke it themselves. Afterall, these are phones and not military grade Samsung Ruby Smarts here!!!
If you want a 100% shatterproof case, wait for the Otterbox case (that was announced last year). This is a great case and has both protection (plastic) and grip (rubber) and adds a bit to the phone w/o losing its sexiness.
I got my wife to be one in pink and she loves it. She has had it about the same amount of time and the only wear hers has is some scratches from her purse (she isn't into flashing roms).
I have a case-mate pop. It's a very sturdy case. The only thing that I think people might have a problem with is that it adds a little bit of 'bulk' to the phone.
I've been using the below Case-Mate Pop for almost a year now. It basically goes everywhere in a outside coat/jacket pocket or cargo pants pocket. Been in the sun, rain, cold and snow of TGWN and keeps on ticking The SNS itself still looks new.
The case is a good firm construction that feels good in your hand and handles a drop from chest height no problem. Only downside is with the tight fit of the case in the beginning. Once broken in, say about 8 mths down the road, the power button area stretches and the corners start to show some wear. This wear and tear so to speak is mostly from taking the case off. These areas get under turned when one puts the case on so you have to flip them up once the case is seated to get the fit
Overall it's a great case for the active outdoor person who doesn't want to worry about destroying their SNS phone/computer investment. Cost $25 CDN
I highly recommend the Seidio Active X Case. I am very protective of my phone too and I feel very safe having this case.
It's very similar to the Otterbox Commuter Case series for several phones. The case doesn't cause much more bulkiness and has a very nice feel imo (to some it may be a little slick). The case covers both the volume and power button but leaves the headphone jack and usb port open for ease.
You can check out reviews on youtube.
http://www.ebay.com/itm/Samsung-Goo...ccessories&hash=item4160a4db1b#ht_2866wt_1163 the best protection ive seen alltho i use platinum case the best one,i bought it on best buy 50$ but its worth it.
Once I got my T-Mobile Note 2, I searched the interwebs for a case that would protect the phone and make it less slippery. The quest was not an easy one, with barely any cases available, and most being replicas with different names. Additionally, none of the ones I saw offered protection around the corners, something that I find 100% essential on a case.
So after several hours on the general Galaxy Note II Accessories forum and several pages down the Amazon hole through multiple search keywords, I found the perfect case, for the time being. The case is a basic TPU S-line hybrid with an added kickstand. Nothing new or revolutionary, I'm sure, but given the lack of choices as of yet, a good one nonetheless.
The case protects, as commented, all 4 corners, and it protrudes enough that it lets you place the phone face down without suffering any damage on the screen. The kickstand works, though this is also the biggest caveat I've found.
The kickstand is on a hinge, and, to keep the case as thin as possible, the kickstand is embedded into the case. This wouldn't be such a problem, this happens on the Seidio Active, for example. However, the case is so thin that the hinges protrude too much out of the case, causing this to be the main point of contact with the surface when you place the phone on its back. It's irritating because one would hope a case would make the phone less slippery when placed on a surface than the original plastic, but hanging from two small pieces of plastic is not much better. There's always the placing the phone on its kickstand position, and that's fine, but don't think about pushing the phone hard on this position, or you'll cause the hinge to let you shift the phone to the "second" position, and, if pushed further, down to the ground.
The kickstand hasn't broken yet, but leaves uncertainty on how long it'll last. The black part of the case is grippy, specially on its sides, with the semi-see-through material being more slippery (though this is not an inconvenience, really).
All ports are well protected, but not covered, so no worries about echo issues like in other cases.
The kickstand is perfect for watching movies on the beautiful 5.5 inch screen.
The durability of the case is debatable. While I'm sure it'll withstand some falls, its purpose is more of a "now it'll not slip off my hands every time I pull it out of my pocket" than "let's toss this sucker from a 20 ft window"
This case more than serves its purpose, and at $5.98 including S&H (shipping from MN, USA), it should be in everyone's short list of capable though cheap cases.
If your phone is naked awaiting a case that fits your immediate needs, this will suffice. If you're looking for something that protects better, is more elegant, and of a known brand, the Seidio Active with Metal Kickstand is my #1 choice. But meanwhile, until it is released, I'd rather have this $6 case than go "naked".
I'm waiting for Amazon to accept all my images that I uploaded so I can provide you with images.
In the meantime, you can check out my Amazon Review here.
>>> It comes on either Black, Blue, Pink, Purple, White. I think I've also seen red, and I'm sure you can also find it on eBay.
>>> Black one seems to be "Unavailable".
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
BrokenPixel said:
Did it come with that screen protector you have installed?
I ordered one from china might get it next year LOL and also ordered another for a note 1, hopefully is as good as this one, I've had the S-line case on my S3 and even tho it was cheap i loved it.. you keep the slimness of the phone witch is important having a 5.5inch screen on the pant pockets isn't fun, imagine adding 1cm of case might aswell get the iDevice-mini.
thanks for the pics now i know what I got into...
Click to expand...
Click to collapse
Yeah I tried to do it so that the selling company was located in the US, just so it wouldn't take so long to arrive because I was holding the phone naked and it was slippery as hell.
The screen protector is a SPIGEN SGP Samsung Galaxy Note 2 Screen Protector Clear Steinheil [Ultra Oleophobic] [2-PACK]
Personally, I don't think the protector is the best, but I feel more comfortable about using my phone now. The safer the better. I got a scratch on my S2 with Gorilla Glass, because I figured "oh Gorilla Glass...don't need a protector". I tried to put protector when I first got it, but failed on 3 accounts. It just didn't look good. Wore it for a while till it looked even worse and I just simply removed it. And of course... Sh*t happens.
So this time, I ordered protector same time as case. Except it is fulfilled by Amazon so it took 2 days free shipping. I think the price is high, AND I have 2-3 bubbles that don't go away. Really, they aren't bubbles. They're specks of dust, and the surrounding area does not stick to the screen. I've thought about using the second protector but...uh I don't know.
"But it's Gorilla Glass 2, you don't need protector!" Not gonna fall twice for that. "But it's gonna interfere with the S Pen!" You know what, I think from time to time it does interfere. I've noticed sometimes while drawing that I might lift the pen but it still draws on the screen. Not sure if that's due to the screen protector or not...
Anyway, best of luck. Protect your phone with the first thing you find in the meantime until you get your case!
i see there's a minor bump on the kickstand that prevents the phone from laying perfectly flat on it's back. Is there' a slight wobble to it if you lay it flat and touch one side?
I just got this case in today and Im happy with what I got for the money.
Sent from my SPH-L900 using XDA Premium HD app
well....
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
yusssi said:
Since I got the Note 2 from t mobile on the day of launch, the store was not carrying any cases so I went ahead and ordered a cheap plastic case from ebay and ran to the sprint store where they had ONE SAMSUNG OEM FLIP CASE and purchased as well. As everybody knows, this samsung OEM case DOES NOT PROVIDE SIDE/CORNER protectio and since I HAVE NO GRIP hands, I had to have every kind of protection available so I integrated both covers. Here are some sample pics. I will keep this on until I get my SPIGEN case!!!!
p.s. I know it looks kind of ghetto but at least I am protected!!!
Click to expand...
Click to collapse
yeah I tried that with my GS3 it was too ghetto for me lol
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
....
fatboypup said:
yeah I tried that with my GS3 it was too ghetto for me lol
Click to expand...
Click to collapse
Hahahaha!! I know!!!
one80oneday said:
Is this TPU case thick? I prefer thick rubber case to protect it more but might consider this since it has a kickstand
Click to expand...
Click to collapse
It really is thin. This may not be the best for you, but I'd say just because of the kickstand, it may hold you over until you find a better one. Personally looking forward to Trident Aegis and Seidio Active. There's also Otterbox...
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
jamexman said:
I got the same but the phone won't fit well. If I manage to fit the top, the bottom won't. If I do the opposite the top won't. Did yours had this problem?
Sent from my SPH-L900 using xda app-developers app
Click to expand...
Click to collapse
Sorry, can't help you there. I really had no problem whatsoever putting this one in. I've taken it out about a dozen times, and I've never had issues taking it out or putting it back in. I ordered the Seidio Active case, so this one will be retired soon. But while using it, my only complaint was that the stand was not reliable. That's about it.
You might want to contact the seller and get a replacement. Looks like there's something wrong with yours. Also, make sure that all ports/buttons line up, and that they didn't send you the case for the wrong phone or some such.
Good luck!
This case is "unavailable" on Amazon but there are a million of them on Ebay, in all different colors. I got one in clear because I like to show off my phone, not the case, although I know from my old iPod case that I actually like the look of a clear glass-like edge around the sides.
I just wanted to chime in that if you get the clear version, beware that it *will* stick to the back cover of the phone. It's ugly because you get these big blobs and patches, and I found it immediately unacceptable. The case only cost me $5 so I just tried sanding it down on the inside so it wouldn't stick... which technically worked, but now it's even uglier. Yeah, I ruined it, but I couldn't see using it the way it was before. I was also concerned that over time, it'd stick so hard that I wouldn't be able to get it off. Already, whenever I'd take it off, I'd hear a "crack" as it unstuck from the back cover. I'm actually still using it after the sanding and it works just fine and doesn't stick anymore, but it is ugly.
My advice is to get a solid color version of this case if you get one, and still sand the inside of it so it doesn't stick. (Though make sure it's really opaque if you sand it; if it's clear at all, you'll see sanding marks.)
I really like kickstand cases but I'm thinking now of just getting something that gives me a little better grip on the phone (like a textured back cover) and then either not getting a case at all, or getting another one of these and hoping it doesn't stick to a more matte back cover.
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Pyr0x64 said:
for those who don't like the gloss look, how about:
http://www.ebay.com/itm/130804580625
available in other colours too
Click to expand...
Click to collapse
U have this one? How is it like? The photo doesn't clarify a lot..
Thx
Sent from my GT-N7100 using xda premium
No, I don't have one sorry.
I just spotted it on ebay last night and thought I would post it here as an alternative for people to consider when I saw the thread earlier
I do have it in my watchlist and may purchase later, but at the moment I'm using a FlyGrip and a plain matt tpu case
The kickstand looks a bit more flush on that one. Does not seem like there is much texture in the TPU for grip though. I will let someone else be the guinea pig, but I am curious to hear about it.
Sent from my Obamaphone using Tapatalk.
Me too, I'm very curious about this case...
Sent from my GT-N7100 using xda premium
They have that one in clear now too.
It looks frosted so it probably just has a matte texture that makes it easier to grip.
I found another clear TPU case similar to the first kickstand one but minus the stand and with all 5-star reviews on Amazon... found the same case on Ebay for cheaper (under 5 bucks) so I'm trying that next. If that one still creates unsightly stickiness, I'll just go for a clear hard plastic case. I've used one of those on my iPod for literally 5 years and they are surprisingly effective and look perfect.
LOL. I ordered the clear one to try out. I am so weak and have no will power.
Sent from my Obamaphone using Tapatalk.
Finding a leather case that's really made for the Note 2 that goes on your hip is a heck of a challenge at best. There's lots of pleather cases out there, and ones that aren't made for the Note...they're big enough to hold two of them I've heard! The case made right is big enough already, it doesn't need to be bigger than needed.
So after lots of looking I settled on the Smartphone Experts Side Pouch.
From what I could tell in the pictures, it looked like a good case and with the black friday discount, I got it for ~$21, not bad for a leather case.
It came in today, and I must say I'm pleasantly surprised. It truly is real leather, smells great and is stamped so on the back (you can see it in the pictures.) Stitching is done nicely, and with black thread instead of the white I see so often. Thank god for that, I don't need my case looking like a leisure suit!
There is extra padding on the exposed side of the case, I haven't seen this before in other cases. This can be seen in the pictures too. The belt clip is sturdy and strong, even though it looks small. The closure is magnetic and holds the flap down securely. Honestly, I don't know if magnets really mess up the phone, but it would be a simple matter to slide a sheet of mu-metal foil inside of the padded area to help with that.
The fit is quite snug, but one can expect that with all leather cases. They usually take about a week or so to form fit to your device. After that, it'll be quite easy to get the case in and out of my pocket. It does have a finger hole in the bottom center of the case to enable you to pop your device out easily. One miss, as pointed out by BrooklynAvi is that there is no headphone hole. I don't use headphones, but I can certainly see how that'd be a problem.
So, all in all, a very nice quality case. Definitely would recommend to anyone looking for a leather hip case.
Thanks for the review. Do you think this pouch can fit the Note Ii with a case? Maybe I'll be a tight fit.
Kinda hard to tell; my phone is naked. The extra padding is soft, so it does have some give in it. If the case is thin, it'll probably go. Good thing is that leather stretches with time, so it should stretch to fit eventually?
I love the Seidio holster but they aren't making it for the GNote 2 without an additional case. In addition to the cost of the extra case, I don't want to have a case on my phone. The strange thing is they make two of those type of cases which annoys me. One should have been the regular one. Well, they said they don't plan to make one so I was in the market for a traditional hip case. I found this one and you confirmed a few things I wanted to know so I'm ordering it now. I used this type for my Dash and several other devices so it shouldn't be too bad. Better than my pocket.
I thought this thread was going to be about a hip ie. fashionable case
I've been deceived ha ha
Sent from my SGH-T889 using xda premium
Kawaisa said:
I've been deceived ha ha
Click to expand...
Click to collapse
Yeah, well.....
One thing I can't stand is a phone in the pocket. Only way to make that worse is to have a LARGE phone in my pocket. It may not look cool, but you can't beat a case on your hip for ease of access.
One (or two) big issues
OP: Can you add this comment (in brief, of course) to the OP so others know the headphones hole is missing?
So I received the case and it was exactly what I expected in terms of quality. It really is designed for a belt but works well on my pants alone when I don't wear a belt but falls off my sweatpants at home (I don't wear my case at home much anyway and this is to be expected). Here are the issues. There are no cutouts for the headphone and charger. The charger isn't truly and issue for me as I doubt I will charge it while wearing it like I've done with other phones (while out and using an external charger) because the battery life is tremendous on the GN2. But I really use the headphones while wearing the case. I actually think that this is a vital feature that was overlooked. My solution will be to pay $5 or $10 to have a professional seamstress cut a hole in it and stitch up the hole. Yeah, it's that important to me.
So if you need a case like this then it's really your only choice. I just didn't think to ask. It's solid though and once it stops being stiff I'm going to enjoy not having to carry the device in my pocket. I'm a huge fan of side cases and this is a really good one. (Anyone remember the awesome one that came with the T-Mobile Dash?)
After a week or so of use I've decided I'm returning the case. It simply doesn't stay on my side and it's fallen off in my car a few times. It even fell off while I was walking. I'm so disappointed in a case that could have been so good.
Sent from my GT-N7105 using xda premium
I never buy those belt clips like that, i had a bad experience with those. The belt part becomes every flimsy very fast. Im still looking for a nice belt holster that isn't ottercase or siedo.
I haven't had a problem with it falling off, but then I always had a belt on when I was using the case. It's a good case, but I've switched to the Best Buy Pt/seidio surface case. Gives the extra grip I need and love the holster.
I am always looking for the perfect kickstand case. To me the perfect case is one that steadily stands the phone in landscape as well as portrait position. It is also important it fits in my front shirt pocket and is fairly easy to get it in and out of the pocket. I have tried several, but the one listed below is my new favorite. It is the thinnest I have tried and is one piece made of hard plastic and goes on easily and is a very good fit with all cutouts properly aligned. It has a nice patterned grip feature on one side so if you hold your phone with your left hand, your fingers will grip these. The kickstand is the best I have used. It is the wide kickstand measuring about 1.25" at its base for a very sturdy platform in portrait mode. The only cons so far are minor, the on/off button and volume rocker are covered and a little hard to press. Also the space between the stand and its brace is small and my finger does not fit in, so it is not as easy to use as a holder as the others I have used. As you can see the price is very reasonable and it also comes with a generic screen protector, a cloth and a generic touchscreen stylus pen. So far it is my favorite.
http://www.ebay.com/itm/400405296661?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649
This has been my favorite kickstand case.
http://kevikev.com/Yoobao-Samsung-Galaxy-Note-II-2-N7100-360-TPU-Case-Stand-YB360TPUNOTE2.htm
oooh, i've never seen this yoobao case before.. noted.. pun intended.
That Yoobao case looks pretty good but when I first saw it, I was worried that the rotating thing would scrape against the phone's back panel. Does it?
I just got it in today. It doesn't touch the back of the phone. There's about a good millimeter or two between the phone and the rotating thing.
iahk said:
I just got it in today. It doesn't touch the back of the phone. There's about a good millimeter or two between the phone and the rotating thing.
Click to expand...
Click to collapse
Does the kickstand on the Yoobao case also allow it to stand in portrait?
yep. that's actually why I bought it since it doubles up as portrait/landscape stand. the one problem is that it's a little wobbly. You have to adjust it a littlest bit. they could've remedied this by making it a bit wider.
do you think yoobao case rotating kick-stand disk will wear off after awhile? I mean constant rotation with whatever locking mechanism they use to keep it steady will wear off since it's all plastic stuff. But at the same time it can make for a neat fly-grip attachment Can you stick your finger under/inside?
If you have some time in your hands go to best buy and try this case. You wont regret it.
http://m.bestbuy.com/m/e/product/detail.jsp?skuId=7620045&pid=1218855011527
Sent from my SAMSUNG-SGH-I317 using xda premium
Has anyone seen these kickstand cases?
any thoughts about them?
http://www.ebay.com/itm/Black-Kicks...581463?pt=PDA_Accessories&hash=item2a1be46d57
http://www.ebay.com/itm/BLACK-V3-DO...093816?pt=PDA_Accessories&hash=item53f1beb8f8
Dxtra said:
If you have some time in your hands go to best buy and try this case. You wont regret it.
http://www.bestbuy.com/site/Platinu...8855011527&skuId=7620045&st=7620045&cp=1&lp=1
Sent from my SAMSUNG-SGH-I317 using xda premium
Click to expand...
Click to collapse
That's actually an re-branded SEIDIO Surface case.
http://www.seidioonline.com/samsung...e-metal-ks-combo-black-p/bd2-hr3ssgt2k-bk.htm
I have the Best Buy "Platinum Series" one here myself. It is a good case overall.
Pros: Very solid feel in your hands. Has a nice soft felt like material on the inside to offer extra protection. The kickstand works pretty well and offers a good angle for the Note 2 when in use. Very durable protection. Easy to install as its a two piece set for the case that clicks in place. The holster piece that comes with it is pretty durable as well and the belt clip is pretty nice as well.
Cons: Hard and I mean HARD to take the dang thing off. This could be a big deal killer for those who need to say swap out their battery/sd card/sim card or whatever often.
Certainly a good case but not without that one con that really be a deal killer for some.
DemoManMLS said:
That's actually an re-branded SEIDIO Surface case.
http://www.seidioonline.com/samsung...e-metal-ks-combo-black-p/bd2-hr3ssgt2k-bk.htm
I have the Best Buy "Platinum Series" one here myself. It is a good case overall.
Pros: Very solid feel in your hands. Has a nice soft felt like material on the inside to offer extra protection. The kickstand works pretty well and offers a good angle for the Note 2 when in use. Very durable protection. Easy to install as its a two piece set for the case that clicks in place. The holster piece that comes with it is pretty durable as well and the belt clip is pretty nice as well.
Cons: Hard and I mean HARD to take the dang thing off. This could be a big deal killer for those who need to say swap out their battery/sd card/sim card or whatever often.
Certainly a good case but not without that one con that really be a deal killer for some.
Click to expand...
Click to collapse
I have this case too and I found that if you take a knife not sharp, more like the butter knife and insert it just off-center in the back "cut" where it snaps the 2 pieces in place, then "twist" the knife (very little twist), you hear a "snap" and now the 2 pieces will come off very easy. I was strugling with it too, but now it's a "snap" to take it off...lol...
there's a youtube video for the seido surface that explains a much easier way to take it off...so i assume it would work for this case as well.
rvb1 said:
I am always looking for the perfect kickstand case. [/url]
Click to expand...
Click to collapse
It's a really nice stand, unfortunately the seller doesn't ship to the UK. Do you know the name of the case so I can do a search please? thanks!
It's a great case. But, as you mentioned, I wouldn't recommend one for people who chance their battery regularly. I stopped using mine when I started to see scratches on the edge of the sides of my phone. The case staves the phone when sliding it on and off.
Sent from my SGH-T889 using Tapatalk 2
samklee said:
It's a great case. But, as you mentioned, I wouldn't recommend one for people who chance their battery regularly. I stopped using mine when I started to see scratches on the edge of the sides of my phone. The case staves the phone when sliding it on and off.
Sent from my SGH-T889 using Tapatalk 2
Click to expand...
Click to collapse
What case are you talking about? If you are talking about a different case to the OP please be clear.
Sent from my GT-N7100 using xda app-developers app
Does it make harder to get your cell phone out of your pocket?
rbelthazor said:
Does it make harder to get your cell phone out of your pocket?
Click to expand...
Click to collapse
If you don't close the stand you'll feel a prick.
Sent from my GT-N7100 using xda app-developers app
providence said:
Has anyone seen these kickstand cases?
any thoughts about them?
http://www.ebay.com/itm/Black-Kicks...581463?pt=PDA_Accessories&hash=item2a1be46d57
http://www.ebay.com/itm/BLACK-V3-DO...093816?pt=PDA_Accessories&hash=item53f1beb8f8
Click to expand...
Click to collapse
I have tried both of those and I like the one I started this thread about much better. The kickstand is sturdier, it is much thinner, easier to get on and off and in my opinion nicer looking.
Cruzerlite makes a case with a kickstand built into the back of the case and its pretty sturdy with multiple colors. Check out Amazon, only about $25.
I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
dengood1 said:
I'm looking for a protective case for my Note 2 that has a grippy/hard rubber feel that doesn't slide around when I lay it down on it's back. I have an Otterbox commuter but the back is hard plastic and slides around a lot if I lay it down unless I flip it over. My wife has an Iphone and her otterbox has a very grippy rubbery feel that is non slip. I wish their Note 2 cases were like that. I'm looking at the Griffin Survivor case and was wondering if anyone has any other recommendations before I try it out? Thanks!
Click to expand...
Click to collapse
http://www.amazon.com/Duzign-Sentin...1378141878&sr=8-3&keywords=duzign+case+note+2
This case has been discussed by many on this forum and it has good reviews. It is definitely protective and grippy. You can even tell from the back rubbery design. If you want something slim, with a soft matte feel, i'd get the Six Abundant Case: http://www.amazon.com/DBA-Cases-Abu...=1378141992&sr=8-1&keywords=six+abundant+case
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dengood1 said:
Wow, that first one definitely looks grippy!
Thanks!
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
You're very welcome
opasha said:
You're very welcome
Click to expand...
Click to collapse
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
From all the reviews and things I have heard about it, it seems to be in the middle. A hard rubber. So it's good for shock absorption. Definitely not a soft rubber because that would wear out very easily. However, from what everyone in the forums have said and from the amazon reviews, it seems like it will stay in place without issue. Also, it's only $10 and from amazon. If you don't like it, you can ship it back the same day for a full refund without any cost to you. Just keep the original box/packaging.
Here's a quote from someone who has it: "The back part of the case (the black exterior) feels more like silicone than plastic which gives it a nice look and grip. I have dropped my phone once on this case and I have to say that this case does a very good job on absorbing impact."
dengood1 said:
Do you know if the back is hard plastic or a softer rubber feel on the first one? I need it to stay put on a flat surface as I move around at work. The Commuter slides all over the place, which I cannot have. It will "stick" if I turn it over because of the rubber edges, but I need the phone to be face up/hands free. Thanks again for your suggestions.
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Brad.S. said:
It's a hard plastic exo with a softer plastic inner. I have this case and it will not hold in place on a hard flat surface. Mine will not even "stick" when placed screen down. The kickstand is about a 4/10 (flimsy, too easily collapsed etc)
Also, the buttons, imo, are junk. Last night, after I started using this case again after owning it for ~6 months (used for 2 weeks), I took a razor blade to the buttons. Couldn't stand them being so difficult to press.
However, the drop protection is definitely up to the same level as the commuter, for being such a cheap case.
I'd say it's worth the price, maybe even less.
Also, I have a similar six abundant case that was free. And although it's very nice, and my most used case, it offers very little protection, and definitely not "grippy" on surfaces.
Wish I had some suggestions. The Griffin Sur. looks grippy. If you search the forum here there are a few people that bought one and commented on the quality. I believe they don't officially support it.. So it's actually a knockoff.
Edit2: forum.xda-developers.com/showthread.php?t=2174889 has info for the knockoff griffin. Enjoy.
Click to expand...
Click to collapse
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
opasha said:
Thanks for the input, bro. That's rather unfortunate. I guess other sources don't have the best description then.
Have you looked into the body glove case? That looks pretty nice and there is a lot of discussion recently on it in the Post Your Pics of Your Phone thread. Check it out.
Click to expand...
Click to collapse
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Brad.S. said:
Definitely bro, maybe others will chime in with different opinions about it.
I was actually just revisiting the idea of the body glove refined gel case (been subbed to that thread for forever). I remember it being a very popular case earlier this year. At one point there was an eBay seller with ~50 of them for $8+free shipping. I should have jumped on it then. I'm just afraid that the lower section of the case (shiny area) will end up scratching easily (read: shiny back mercury case).
Still haven't even gotten around to trying the UAG... Even though I designed and 3D printed some custom inserts.
What case are you rockin?
Click to expand...
Click to collapse
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
opasha said:
3d printing?? Dude that's awesome! I saw on geeky gadgets or theawesomer website ad about a 3d real time laser scanner. It was really impressive. Expensive ($1400 I think) but very cool. Right now I'm using my Six Abundant Case. I rotate between that and my white UAG case. The UAG case is worth it for me. It's not super bulky and protects my phone extremely well. I have large hands so I have no problem gripping and using my phone in one hand with either case on. I do have way too many cases at this point. I even have the casemate tough. Totally forgot to mention that. That definitely has a good feel in terms of grip and it is super slim for a fully protective case. Another nice one is the DBA ultra case. I'll most likely be upgrading to the note 3 so I stopped buying more cases, lol.
Click to expand...
Click to collapse
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Brad.S. said:
Yeah! Got into robotics development at my University a few years back and somehow got nominated to be the guy that learns the ins/outs of our 3D printer so that I can teach others everything about it (even the computer science professors). In the printing world, $1400 is fairly cheap for a production item.
I did see the 3D scanner. I believe it is going to be made by Makerbot. We made our own using a Kinect (think: xbox 360) to do real-time scans of objects and roll them into 3D files. However, I usually make one-off prints so I have to build them entirely by hand in a 3D environment.
Agh.. You are making it hard not to press the "complete my order" button for the black uag haha. I too have large hands/long fingers; I often get my iPhone-using-friends asking me how I always use one hand with this beast. If I was a female I'm sure I'd have gained muscle from just using it by now lol.
Forgot about casemate. I'll have to check them out. (have their tough case on my Skyrocket & love it)
I'll most likely be upgrading as well (if not at least a smart watch).. So now seems like a bad time for me to by yet another case.. But.. I have an addiction lol.
Click to expand...
Click to collapse
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
opasha said:
That's really nice, bro. I know $1400 is not that expensive when it refers to such technology, but I meant in general - that's like a nice fully loaded laptop price, lol. I'm familiar with Kinect/Xbox360 so yeah, that's really interesting. I'm sure the whole 3D development can take time from scratch. Maybe I missed them, but did you ever post pics of your 3D-rendered cases? I'd love to see how they turned out.
Yes, the Case-Mate Tough is solid. I have the same black one as in this teamvenum review: http://www.teamvenum.com/forum/viewtopic.php?f=9&t=686
I know you complained about the buttons you eventually cut out of your Sentinel case. This is where the UAG shines. The button design makes it super easy to press the covered buttons. The one thing I love about my UAG case is that I can just toss my phone around onto my bed or the table like whatever without any worry. The shock absorption technology on UAG cases is pretty solid. I even got one for my father's S3 and he loves it (esp since he is accident prone/clumsy with all technology, lol).
Yes, the smart watch upgrade is definitely happening for me as well. I can't wait till they release the Samsung Gear this September. It's definitely going to be a step up from my pebble watch, which I use and wear all the time.
Also, your addiction...I understand all too well, especially being a huge tech fanatic. If you don't have a solid protective/easy to hold case currently and work in an environment where you really need that, I would go for it.
Click to expand...
Click to collapse
I never printed any cases for my Note 2, just the inserts for the UAG case with lettering and glow in the dark filament etc. I did make four cases for my gf's S3 but in the end she moved to a pink folio wallet case (which would take too much time to make haha). I've since then had two dead SD cards.. So I've lost a lot of pictures (backups are my priority every 24hrs now..). The cases were more of a "wow factor" type of thing. Everywhere we went people asked more about her case than my huge phone lol.. Lead to a lot of explanations of what a 3D printer is.. But After a few times on/off of the case they'd get weak and start to crack at random layers of which the printer printed it (our printer has a resolution of 0.001mm).
Started sanding the area of the Sentinel case today that I hacked out with the razor to make it smoother. Only had about ten minutes with some 1600grit paper, so I got one side pretty smooth!
I wanted to pledge money to the kreyos smart watch but got worried that I'd be stuck with money in the air for it and no item on my wrist until next summer.. The galaxy gear is definitely going to be watched (pun intended)! As long as it stays within $200-300..
As you can tell, it's hard for me to commit to some purchases lol!
To op: I remember seeing some peel & stick grip strips for phones. They were just thin clear gel-type adhesive strips. Been looking for them but can't find the review. Honestly, I'd also like a grippy case..
Edit: found it! www.egrips.com/ check it out.
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
dengood1 said:
Thanks for everyone's input...much appreciated. I own the Bodyglove case but I is still harder plastic than I would like. Its a decent case though. I had the Casemate Toughcase for my Note 1 and liked it, very protective as well, but still had a hard plastic outer shell. Maybe I'll research on getting some type of nonslip rubber strips for my Otterbox to see how that works. There are a few cases mentioned here I'll have to take a look at. Thanks again to you all.
Sent from my SGH-I317 using xda app-developers app
Click to expand...
Click to collapse
Try the DBA Cases Ultra protection cases very good quality and good feel
http://www.dbacases.com/samsung.html
I have the UAG case. I have used the UAG line of cases for all my phones and they are solid. They have the bevel in the front so if it drops face down you wont shatter your screen and it has extra cushion on the corner bumpers. They are only $30 - $35 online. They fit on my OEM samsung dock with spare batttery charger.
The reason why I trust all my phones in the UAG case is that my wife's nephew through my note down the escalator at the mall. My heart stopped as I saw it tumble and bounce off every step. When I went to get it, the phone and case didnt have a scratch on it. The otterboxes are great but they are way too big. Especially for our note.
I am using a cheap eBay tpu. Smoke clear and it is rubber. It works great and protects just fine. Best of all it was only a buck and a half! Rubber does a pretty decent job of keeping it from sliding around unless it is on something very slick. keeps good in the hand too
Sent from my kraken (Note2) using xda app
I have the body glove from sprint.
I feel it offers the best for daily use and it has pocketablility which is nice. It doesn't get hung up as it has a glossy surface at the bottom of the phone.