Hello everyone. I am installed einstein.frat's kernel and russell's revolution rom to my telephone. Actually, they are working very nicely but sometimes my telephone restarting for no reason. I don't understand why. Can you help me?
i'm sorry, my english very bad.
odunluzikkim said:
Hello everyone. I am installed einstein.frat's kernel and russell's revolution rom to my telephone. Actually, they are working very nicely but sometimes my telephone restarting for no reason. I don't understand why. Can you help me?
i'm sorry, my english very bad.
Click to expand...
Click to collapse
Some devices have this problem.Try reducing the overclock speed to 680mhz (No reboots at this frequency ) Or you can just install the stock kernel too.
nikhil16242 said:
Some devices have this problem.Try reducing the overclock speed to 680mhz (No reboots at this frequency ) Or you can just install the stock kernel too.
Click to expand...
Click to collapse
Thank you mate . I opened No-frills CPU Control program and I choose the max frequency 678 mhz. I'm trying now.
thank you for help
Related
Hello xda,
I am posting here as i do not have sufficient rights to post in developer section.
My Q is that is anyone facing problem in boype's modded CyanogenMod 7 latest builds:
cm-7-package-20120916-p970-boype
cm-7-package-20120909-p970-boype
I am facing atleast one SOD per day.
This is not an accusation,just a question.
If anyone could solve the problem.
Even bagr84 is also facing the problem as he said in his reply.
http://forum.xda-developers.com/showthread.php?t=1734312&page=155
Thanks.
e1forall said:
Hello xda,
I am posting here as i do not have sufficient rights to post in developer section.
My Q is that is anyone facing problem in boype's modded CyanogenMod 7 latest builds:
cm-7-package-20120916-p970-boype
cm-7-package-20120909-p970-boype
I am facing atleast one SOD per day.
This is not an accusation,just a question.
If anyone could solve the problem.
Even bagr84 is also facing the problem as he said in his reply.
http://forum.xda-developers.com/showthread.php?t=1734312&page=155
Thanks.
Click to expand...
Click to collapse
Did you do a full wipe before installing the ROMs? Did you restore apps and data with Titanium Backup?
I only had that problem, when I either not did a full wipe, or restored via TB.
N00BY0815 said:
Did you do a full wipe before installing the ROMs? Did you restore apps and data with Titanium Backup?
I only had that problem, when I either not did a full wipe, or restored via TB.
Click to expand...
Click to collapse
Thanks for the quick reply.
I do data reset and dalvik cache reset from CWM before flashing any rom
and
I always do the all apps manual installation process after flashing any rom.
Same problem I faced in both the builds I mentioned.
Before the cm-7-package-20120909-p970-boype build the rom was stable for me.
Never tried tweaking anything else except for the graphic ones.
Thanks
I got SODs with the 20120909 build. They went away after I set the minimum CPU clock to 400MHz (interactivex-governor).
OptiMyst said:
I got SODs with the 20120909 build. They went away after I set the minimum CPU clock to 400MHz (interactivex-governor).
Click to expand...
Click to collapse
Thanks for the reply
Currently i rebeveted back to 20120905 from 20120916...That is i flashed 20120905 back on 20120916
Did wipe/reset, wipe dalvik cache, cache reset.
No SODs so far ...
But facing a new problem.. when I connect my phone to mass storage it restarts.
Any clue?
And on 20120905 the minimum cpu clock is 200MHz default governor and still no sod.
And doesnt setting minimum cpu clock to 400MHz will eat battery?
Any solution for my new problem?
No replies?
No one is facing such problems?
Sorry but what is SOD. New here that's why asking..
Sent from my LG-P970 using Tapatalk 2
vishaldhamnekar said:
Sorry but what is SOD. New here that's why asking..
Sent from my LG-P970 using Tapatalk 2
Click to expand...
Click to collapse
Screen of death. Frozen screen
vishaldhamnekar said:
Sorry but what is SOD. New here that's why asking..
Sent from my LG-P970 using Tapatalk 2
Click to expand...
Click to collapse
Probably a mac user?
On Topic:
I had no problems on interactivex
OptiMyst said:
I got SODs with the 20120909 build. They went away after I set the minimum CPU clock to 400MHz (interactivex-governor).
Click to expand...
Click to collapse
Hey
Thanks man.. it helped...
back to boype's 20120916 build and minimum clock to 400MHz ....
no sods so far... :laugh:
Just a quick notice: I've upgraded to boype's 20120925 build yesterday which contains changes to help against SODs. I've changed minimum clock back to 200 MHz to see if it the new version is better. I had no SOD so far. I'll keep an eye on it.
OptiMyst said:
Just a quick notice: I've upgraded to boype's 20120925 build yesterday which contains changes to help against SODs. I've changed minimum clock back to 200 MHz to see if it the new version is better. I had no SOD so far. I'll keep an eye on it.
Click to expand...
Click to collapse
Hey
I have also upgraded to 20120925 build but have the same settings as before.
Governor - interactivex
min cpu freq - 400 MHz
I'll too change it to 200 and chek.
Thanks.
I had few SoDs after I've updated to the latest build. I've change minimum freq to 400MHz.
I had no SODs, but I had two spontaneous reboots to recovery-mode while in standby. I'm also going back to 400 MHz minimum clock now.
Yeah minimum clock to 400 MHz works fine.... no SOD's so far ... using at this setting since my last reply.
This maybe out of topic but anyone facing USB mass storage problem, the flash drive not shown on the computer screen or instant restart at USB mass connection turned on ...
??
where are you man..don't stay at stoneage.....go to future...
Now trend is CM10....enjoy the jellybean
pvsukumars said:
where are you man..don't stay at stoneage.....go to future...
Now trend is CM10....enjoy the jellybean
Click to expand...
Click to collapse
Any suggestions.....STABLE BUILD I mean for daily use....
Thanks
e1forall said:
Any suggestions.....STABLE BUILD I mean for daily use....
Thanks
Click to expand...
Click to collapse
The M2 build is doing a pretty good job but check it out on your own
Sent from my LG-P970 using xda app-developers app
N00BY0815 said:
The M2 build is doing a pretty good job but check it out on your own
Sent from my LG-P970 using xda app-developers app
Click to expand...
Click to collapse
Aah yes.. I'll try this thing...
Here's the link
http://get.cm/?device=p970&type=snapshot
e1forall said:
Aah yes.. I'll try this thing...
Here's the link
http://get.cm/?device=p970&type=snapshot
Click to expand...
Click to collapse
i want to use boypes rom
but i have always sods
launcher goes crazy
etc.
which cpu settings no sods no fcs no wakelocks and without problems?
could you tell me?
Hi
I recently tried to use a custom ROM and ended up trying almost all custom ROMs available for HTC Desire C. The problem is that whatever custom ROM I install my mobile reboots automatically while working on it. Sometimes during calls, sometimes during accessing Internet and also while accessing the menu items. What am I doing wrong or what should I do???
Your phone is not able to handle the cpu frequency. Flash a kernel with a lower frequency. Try 767MHz.
Or just use SetCPU or NoFrillsCPU app and lower the max frequency.
Frequency change did not work either
aashay960 said:
Your phone is not able to handle the cpu frequency. Flash a kernel with a lower frequency. Try 767MHz.
Or just use SetCPU or NoFrillsCPU app and lower the max frequency.
Click to expand...
Click to collapse
HI
Thank you for the reply... I tried changing the frequencies, but still it reboots
sathee12 said:
HI
Thank you for the reply... I tried changing the frequencies, but still it reboots
Click to expand...
Click to collapse
OK, first run the phone at 600 max, if it doesn't reboot in a day or two, increase it one step. Do this until it finally reboots.. Then you will know your phone's capacity.
And if it reboots at 600, then the problem might be something else.. And please tell me what rom and kernel you are currently using..
aashay960 said:
OK, first run the phone at 600 max, if it doesn't reboot in a day or two, increase it one step. Do this until it finally reboots.. Then you will know your phone's capacity.
And if it reboots at 600, then the problem might be something else.. And please tell me what rom and kernel you are currently using..
Click to expand...
Click to collapse
lguix rom supports which kernel and also for sonyxperia rom supports which kernel plss help me
Click on the second link in my signature. If the rom is present under 'Jellybean 4.1.2', then use either NOPE or Prometheus cm10. If it is present under sense, then use prometheus sense kernel.
hello friends..i am using cm10.1.3 latest based on 4.2.2 jellybean.I always set my cpu speed at 480 megahertz... and in that speed when i tried to multitasking it just gets a fast reboot..i think the problem is only for cm10.1...now is there any way to solve it???
my device info:
model: gts 5830
rom: cm 10.1.3 latest
ram: default 26% (72 mb)
kernel: default of cm 10.1
debajyoti1 said:
hello friends..i am using cm10.1.3 latest based on 4.2.2 jellybean.I always set my cpu speed at 480 megahertz... and in that speed when i tried to multitasking it just gets a fast reboot..i think the problem is only for cm10.1...now is there any way to solve it???
my device info:
model: gts 5830
rom: cm 10.1.3 latest
ram: default 26% (72 mb)
kernel: default of cm 10.1
Click to expand...
Click to collapse
Usually multitasking on CM 10 and above always slows down your device because of huge RAM and CPU requirement. Can you try increasing the CPU speed to 800 MHz and see if it makes a difference? If it doesn't, then it must a problem with the rom. Don't forget our device was not meant to get an official update after Gingerbread because of its low hardware specifications. Do post the result. Hope I Helped
debajyoti1 said:
ram: default 26% (72 mb)
Click to expand...
Click to collapse
You Need To Disable zRAM.
BTW: The Latest From CM 10.1 Branch is 10.1.6
mahithm said:
Usually multitasking on CM 10 and above always slows down your device because of huge RAM and CPU requirement. Can you try increasing the CPU speed to 800 MHz and see if it makes a difference? If it doesn't, then it must a problem with the rom. Don't forget our device was not meant to get an official update after Gingerbread because of its low hardware specifications. Do post the result. Hope I Helped
Click to expand...
Click to collapse
yes bro I know that our ace is old,outdated and have low hardware...i am facing the problem in @800 megahertz also when i type very fast,or do any activities (touches) very fast and the problem is only with cm 10.1 so i thought there might be any solution.. btw thanx for your reply..
thanx
waqaswasil said:
You Need To Disable zRAM.
BTW: The
yes may be but mine rom is latest....yes its reduce the lag of rebooting..
Click to expand...
Click to collapse
debajyoti1 said:
yes bro I know that our ace is old,outdated and have low hardware...i am facing the problem in @800 megahertz also when i type very fast,or do any activities (touches) very fast and the problem is only with cm 10.1 so i thought there might be any solution.. btw thanx for your reply..
Click to expand...
Click to collapse
Better post this problem at the rom thread. Rom developer would be able to provide a solution to your problem
Which min freq value are you using?
hi ,
I flashed this rom ... I followed the instructions and so far everything seems to work :good:... The only downside for the sound .. it is low in spite of all the settings .. Is that someone one has already experience this problem?
Will I have to use support programs .. or modify parameters
philed said:
hi ,
I flashed this rom ... I followed the instructions and so far everything seems to work :good:... The only downside for the sound .. it is low in spite of all the settings .. Is that someone one has already experience this problem?
Will I have to use support programs .. or modify parameters
Click to expand...
Click to collapse
Flash Williams kernel and use Fauxsound to increase your sound.
Gamm86 said:
Flash Williams kernel and use Fauxsound to increase your sound.
Click to expand...
Click to collapse
ok I try, thank you
I have a nice bootloop with william kernel V4 ..
ok all is well with cm11_williams_kernel_v4...
Q&A for [KERNEL][AGNi][CM] 06-10-2014 AGNi pureCM v2.8.9 I9300 (ULTRA SMOOTH)
Some developers prefer that questions remain separate from their main development thread to help keep things organized. Placing your question within this thread will increase its chances of being answered by a member of the community or by the developer. Thanks for understanding and for helping to keep XDA neat and tidy! :smile:
Roms
Hello, with which roms works apart from cm?
Artyom98 said:
Hello, with which roms works apart from cm?
Click to expand...
Click to collapse
all non samsung roms 4.4.x except miui.
psndna88 said:
all non samsung roms 4.4.x except miui.
Click to expand...
Click to collapse
How to tweak?
mjp93 said:
How to tweak?
Click to expand...
Click to collapse
agni control inbuilt autoinstalled..
i didnt find it
---------- Post added at 09:23 AM ---------- Previous post was at 09:21 AM ----------
psndna88 said:
agni control inbuilt autoinstalled..
Click to expand...
Click to collapse
It means kernel didn't installed! Why? i did all things via aroma. Should i retry? Can u fouofure) figure out?
check about device in settings.. will show wat kernel installed.
incase of auto install failure, install two apks present in /res/app by root explorer.
psndna88 said:
check about device in settings.. will show wat kernel installed.
incase of auto install failure, install two apks present in /res/app by root explorer.
Click to expand...
Click to collapse
Umm, kernel got installed , but passing the boot screen device don't boot up. had to reflash the rom. Checked twice but after kernel installation device won't start.
device 9300 , cm 11
mjp93 said:
Umm, kernel got installed , but passing the boot screen device don't boot up. had to reflash the rom. Checked twice but after kernel installation device won't start.
device 9300 , cm 11
Click to expand...
Click to collapse
i hav it working in my device i9300 LS rom.
check for bad download.
psndna88 said:
i hav it working in my device i9300 LS rom.
check for bad download.
Click to expand...
Click to collapse
I downloaded twice differently . So your opinion is a bad download?
mjp93 said:
I downloaded twice differently . So your opinion is a bad download?
Click to expand...
Click to collapse
else, ur using r4p0 kernel variant which is only meant for nameless rom.
psndna88 said:
else, ur using r4p0 kernel variant which is only meant for nameless rom.
Click to expand...
Click to collapse
So where i select that? Guide or links?
mjp93 said:
So where i select that? Guide or links?
Click to expand...
Click to collapse
http://forum.xda-developers.com/devdb/project/dl/?id=9258
check the filename ur flashing..
if it has words R4P0 then it will work only for nameless rom.
psndna88 said:
http://forum.xda-developers.com/devdb/project/dl/?id=9258
check the filename ur flashing..
if it has words R4P0 then it will work only for nameless rom.
Click to expand...
Click to collapse
Yes r4p0 was what i had.
but was it in the downloads that it's for unnamed rom?
a last question - 1.6 Ghz clock would be good om daily basis. Any harm to device? what to use?
Thanks.
mjp93 said:
Yes r4p0 was what i had.
but was it in the downloads that it's for unnamed rom?
a last question - 1.6 Ghz clock would be good om daily basis. Any harm to device? what to use?
Thanks.
Click to expand...
Click to collapse
well regular users know abt this
n i had mentioned this in the past
1.6 ghz i never tried
if it is unstable, dont oc
psndna88 said:
well regular users know abt this
n i had mentioned this in the past
1.6 ghz i never tried
if it is unstable, dont oc
Click to expand...
Click to collapse
Well now I love one thing that it does shows India.
And what does oc means?
mjp93 said:
Yes r4p0 was what i had.
but was it in the downloads that it's for unnamed rom?
a last question - 1.6 Ghz clock would be good om daily basis. Any harm to device? what to use?
Thanks.
Click to expand...
Click to collapse
My phone is always set to 1.6ghz with a 30mv undervolt and I haven't experienced any problems / crashes.
ArkThompson said:
My phone is always set to 1.6ghz with a 30mv undervolt and I haven't experienced any problems / crashes.
Click to expand...
Click to collapse
I don't understand undervolt. If i keep it on 1.6 don't know further about under volt. it's okay?
mjp93 said:
I don't understand undervolt. If i keep it on 1.6 don't know further about under volt. it's okay?
Click to expand...
Click to collapse
If you don't undervolt then your phone will get too hot / use too much battery when overclocking (going to 1.6). It's best to test how high you can undervolt your phone before it starts to lag / freeze to find the optimal level of undervolting (e.g. my phone freezes at 40mv because of touchboost). If your phone refuses to boot after overclocking / undervolting then you can flash AGNi_reset_oc-uv_on_boot_failure.zip (found in /sdcard) to fix it.
ArkThompson said:
If you don't undervolt then your phone will get too hot / use too much battery when overclocking (going to 1.6). It's best to test how high you can undervolt your phone before it starts to lag / freeze to find the optimal level of undervolting (e.g. my phone freezes at 40mv because of touchboost). If your phone refuses to boot after overclocking / undervolting then you can flash AGNi_reset_oc-uv_on_boot_failure.zip (found in /sdcard) to fix it.
Click to expand...
Click to collapse
so i did undervolt to - 30 and i dont use touch boost. but i fear about that boot problem.