Related
Hello,
I have a Samsung galaxy s captivate and I now the ROM v6 continuum in 2.3.4 ... I wanted to stock rom using ODIN3 but its blocked in factoryfs and it makes a green screen I unplug the usb and remove the battery .. Now I can not open my samsung what can I do?! Help me I just buy it at a guy and he is in mid 2.3.4
I'm having the same problem, but mine won't go past the Galaxy S Samsung.
keep trying odin and it should work
Sent from my GT-I9000 using XDA App
I can not do anything.... I visited all the forums, but there is a solution, but I do know if the usb jig would work .. Because all youtube video showing usb jig with the problem of the panel exclamation between the cell and the computer, but they do not show the same problem as me
Thing is IF a jig wont fix it you will have to send it to get fixed with a Jtag. Jig can be made with little cost (made mine for about $2.50) or buy em already made for $8-$11.
Keep in mind when I say the jig can fix i mean it can force your phone in to download mode.
-Pull battery
-Plug usb cable
-Put battery & hold Vol+/Vol-
If you can't go in download via this method you need a usb jig to force it.
Then reflash with Odin until successfull. You just had a bad flash and a bad fs will not let you boot the phone normally and use the button combo to go into download so you need to bypass with the usb cable method or the jig.
v-sasuke said:
Hello,
I have a Samsung galaxy s captivate and I now the ROM v6 continuum in 2.3.4 ... I wanted to stock rom using ODIN3 but its blocked in factoryfs and it makes a green screen I unplug the usb and remove the battery .. Now I can not open my samsung what can I do?! Help me I just buy it at a guy and he is in mid 2.3.4
Click to expand...
Click to collapse
So let me get this right. You just bought the phone, then watched a video without reading anything and now your stuck. Please do your part is saving hard bricked devices. DO THE RESEARCH.
Yea flashing roms is a big deal you should be sure you read everything before tring then read it a 2nd and 3rd time. And not just info in the op all the info on your device.
Good luck
Sent from my GT-I9000 using XDA App
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Can you exactly give the file name, which you have used to flash PDA section? and size of it
Titek said:
Hi there.
I have a problem with my Samsung Galaxy Note since I wanted to make it rootable.
When I bought it, I could use any simcard inside, so it is "unlocked".
Yesterday, I wanted to use my phone to root it but some files can't be downloaded via WWW.MULTIUPLOAD.COM (i guess it is because of what happened to MEGAUPLOAD).
So, one of my first questions is : is USB DEBUGGING activated when using the Galaxy note for the first time or not at all? (I didn't activate it when using my Galaxy Note before flashing it)
Second, I have used Odin to flash a file (PDA slot), the file was hard to find but google could help (i'm just meaning that some links here seem to be "broken" on multiupload). The flash was fine and the phone boot back... to a yellow triangle.
No way to change it.
No backup from the rom, but I remember it is a KKA.
I 've looked in that thread ( http://forum.xda-developers.com/showthread.php?t=1350960) to find everything that could help me, but the file is no more on multiupload
I tried via that thread, too :
http://forum.xda-developers.com/showthread.php?t=1370156 , but the problem remains
Third, I don't have any jug usb to use and no CMW installed nor loaded.
Could a kernel help to solve the problem about the yellow triangle, using ODIN, or not? Or is it better to use a fully functionnal rom, as a KKA?
Any help/comment would be much appreciated
N.B : sorry for my english that can be "poor" sometimes :s
Click to expand...
Click to collapse
1. It doesn't matter while flashing using PC Odin.
2. Are you sure about which ROM you flashed ( Suspecting you have flashed Custom ROM)
3. Their is way to remove Triangle (!) , you should use JIG
follow the link for more details.
http://forum.xda-developers.com/showthread.php?t=1354888
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
The file I could find using google was about 8Mo and the flash was quite fast.
(I used it for the PDA part)
I also referred to that thread :
(http://forum.xda-developers.com/showthread.php?t=1329360)
dr.ketan said:
---------------------------------------------------------------------------------------------------------------
When No Any other method works to Root your device, use this
---------------------------------------------------------------------------------------------------------------
Note that, this will downgrade your ROM to KJ1, after that you can update it.
Download: http://www.multiupload.com/YB9EL8D8O3
- Make sure your SGN is NOT connected to your computer
- Reboot your SGN into "download mode" (Vol down + Home + Power))
- Start ODIN
- Click the PDA button, and select the "SGN_XX_OXA_KJ1_FACTORYFS.tar" file
- Connect the SGN to your computer
- Make sure "repartition" is NOT checked
- Click the START button
- Wait for the phone to reboot TWICE
- Done.
Now you have your device Rooted, Install Mobile Odin Pro n update your device to any new ROM with Mobile Odin
Click to expand...
Click to collapse
using the file for KKA, but then, next flashing, the yellow triangle...
I'm working right now but I can repost here in a few hours the exact name of the file I have found using google that I could not find over here.
Anyway, do you think I can "repair" it without any JIG USB?
And yes, it was on a custom rom (the phone is just new, only a few hours in my hands ) but it's not my first one (i could flash a HD2 and the Samsung Tablet with no problems...
Titek said:
Thanks for your quick replies
So, I wanted to flash that, using ODIN:
Recovery ClockworkMod Odin flashable.Tar
But on XDA, the link about it is in fact Superuser-3.0.6-efgh-signed.zip.
Did I miss something??
Click to expand...
Click to collapse
This thing you did wrong, I have made lot effort to update Rooting guide here, still somebody How can find this guide i dont know.
Basically you have flashed with Netchip method, which was very first appeared, but later netchip also said, to not to use, b'coz it causing raise Flash counter
as well yellow triangle.
Now onwards remember, NEVER use PC ODIN to Flash Any Custome ROM/Kernel.
I am updating link here soon, how to reset your counter. You requires JIG for that
Edit : here is guide how to reset binaru count, n remove yellow triangle
http://forum.xda-developers.com/showthread.php?t=1354888
-------------------
BTW till you get JIG, just go to this thread http://forum.xda-developers.com/showthread.php?t=1424997 and download and flash ROM using PC odin(here it is stock ROM u can use it safely). you will get your phone working. later you can reset counter with JIG
Download my guide from here, how to update ROM, you can use Updating ROM with PC Odin section from guide.
Many thanks again, dr.ketan for such reply so fast
Hmmmm then I will have to wait for a JIG. I will order a JIG, it seems the price is not so expensive.
Thanks again for your comments and help, much appreciated
Ya jig is costing just 1-2 usd
Sent from my GT-N7000 using xda premium
dr.ketan said:
Ya jig is costing just 1-2 usd
Even you can make it at home, guide link is inside previous msg (how to use jig)
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Sent from my GT-N7000 using xda premium
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Titek said:
My 2 cents about that question, but if I have a message saying that there is an error while turning on the phone now :
Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again.
The problem is, when using Kies (for Windows), it is looking for the Galaxy Note, and, even if it is connected via USB, nothing happens, it's looking long, long, long, time, then, it says that it can not find it.
So, is a JIG still required?
Click to expand...
Click to collapse
See, JIG is required for totally different reason.
Your issue regarding, not connecting kies / Booting phone, won't be solved by JIG.
Jig can b use in two condition. One when you are unable to enter in download mode. I think, you dont have this issue
another To reset counter, for which you require JIG in your case.
Error you are facing right now during booting of device, can be solved by Reflashing ROM. You can flash any stock ROM with PC Odin, shud be enough to solve it.
Now regarding use of JIG, just enter in download mode, check Lt upper corner of devoce, it will have number of flash you have performed, i think in your case it must be 1 or more. which in normal case should be zero. Only To reset that counter, you needs Jig.
Thanks again.
Well, I download another stock rom but I got a "fail" (red color) above "id:com", when flashing on ODIN.
I am using Windows7 and tested the compatibility mode, the problem remains.
I have .md5 file that I put on PDA part. Then I click on Start but nothing, except the "fail" message.
When turning off the phone and on, I got the other message, said in my previous post :
"Firmware upgrade encoutered an issue. Please select recovery mode in Kies & try again."
So, Am I missing something.
About the download mode, the number is 7 in fact.
Oh I remember the file I wanted to flash via ODIN : netchip-cwm-update2.tar
It seemed to work just because the phone turned off and I got a "green" message that said that it was ok. (PASS).
I read one of your thread, when nothing works, so that man should go here :
http://forum.xda-developers.com/showpost.php?p=18981227&postcount=4
but the file (link) is not working now, so I can not get the file to test :s
But since then, I can not boot on Android anymore...
Yes unfortunately link is down since 2 days
Ya thats i guessed when i read you have used superuser zip, i have said earlier in 1 msg, you have used netchip.
Anyway, once go to recovery (vol up +home+power)n wipe data, clear cache, clear dwlvic caxhe.
Then put phone in download mode. Close firewall/antivirus on pc, open odin, connect device with download mode(vol down+home+power), if id com glow yellow, thn proceed with start
Gudluck
Sent from my GT-N7000 using xda premium
The main problem is that, too.
I can not enter Recovery, I got the yellow triangle.
I can only go in download mode, and when turning off and on the phone, the message said above :s
is JIG the only way to solve all that?
is my phone "blocked"? I am trying to test another stock rom, I'll give it a try and let you guess what happens.
EDIT 22:37:
The flash with that rom (N7000XXLA4_N7000DREKL1_DRE) has failed, even if it is a stock one.
Can I try to use any other rom from another country? Before I tried to flash the rom, I saw it was a KKA. Can I try so with a LA3 or something else, still stock one?
Oh man, that's so bad....
I think I found the problem...
I am using Windows7 64 bits.
My wife is on WindowsXP and I am using Odin on her netbook, and it's quite better !
the flashing is going on.
Hey !!!! that's all good !!!!! ^^'
My Galaxy Notes is working again ^'^'
Maybe should it be mentionned to be careful when using Windows7 64 bits, if some other members would have the same problem when flashing their roms?
Congrates !
ya it is common problem(win7), many time it has been discussed , but it is not that everytime it not works, but it happens in few cases.
When reading your answer yesterday, I thought I might had a chance to make my Galaxy Note working again without JIG.
Now I've downloaded Samsung drivers, for Windows7 64 bits, and I can flash with no problem. I'm backing up and can use CWM
Thanks again for your help and answers
I had the same problem, but then I decided to use the ORIGINAL usb cable and see: it did the trick !!!. Even on Windows 10 64bit !.
Hey Everybody..
I think my Note is totally bricked.
It cant go in Downloadmode.
What can i do? Plz. Help me. Im looost..
Thanks
but or make USB jig
Hmm, does the usb jig help in totally dead situation?
Perhaps this will help you get to Download Mode with USB jig:
http://forum.xda-developers.com/showthread.php?t=1402286
I sincerely hope it helps.
I've bricked my galaxy note too, I was trying to flash siyah kernel. Now it just shows Samsung logo in the beginning then bunch of colored lines fade into white screen and turns off. Please help needed
emre1903 said:
I've bricked my galaxy note too, I was trying to flash siyah kernel. Now it just shows Samsung logo in the beginning then bunch of colored lines fade into white screen and turns off. Please help needed
Click to expand...
Click to collapse
Did you try the below solution? Buy a JIG on eBay, it's a must have for flash-o-philes!
Sramie said:
but or make USB jig
Click to expand...
Click to collapse
How do i check my phone, is it hardbricked or softbricked?
Hi there.
From what I've met with my G.N, when you got other message than the yellow triangle, you may flash your G.N with a custom rom with no problems within Download Mode.
If you got the yellow triangle, you may could go to download mode, too and flash a custom rom.
if no way to go to download mode, then I think the only answer is JIG.
B.R
I have tried the 3-bottom method, and no reaction! Keep turned off! (Dead)
Snoopyass said:
I have tried the 3-bottom method, and no reaction! Keep turned off! (Dead)
Click to expand...
Click to collapse
Maybe the USB jig will help you to boot into the download mode.
Can you enter CWM?
How did you "bricked" your Note?
What have you flashed?
I would flash my Note with odin.
But it fails, i think it was the wrong PIT file.
And after that, it turns off, and now i cant turn it on again.
Usb Jig is only for 2.3.4 and earlier use?
Mine is 2.3.6
Snoopyass said:
I would flash my Note with odin.
But it fails, i think it was the wrong PIT file.
And after that, it turns off, and now i cant turn it on again.
Usb Jig is only for 2.3.4 and earlier use?
Mine is 2.3.6
Click to expand...
Click to collapse
Their is nothing to do with version. JIG used for Put your device in Download mode and Clear your Custom binary Counter.
Before flashing ROM please read all instructions carefully.
As they said while flashing ROM using PC Odin you should not use Pit file and Not to Tick "Re-Partition".
Yes.. MY BAD..! Now im stuck here with a dead phone. But the Usb jig can wake it alive again??
Snoopyass said:
Yes.. MY BAD..! Now im stuck here with a dead phone. But the Usb jig can wake it alive again??
Click to expand...
Click to collapse
The USB jig can boot your phone into the download mode, but only if the phone does response in any other way, I think. For example showing the battery icon, when plugged in for charging.
But you can try it anyways.
The download mode will work!
the only exception is a hardware defect.
you can't get an hardware defect by flashing.
the bootloader (3 button or jig) will work.
there is no way to kill the hardware during flashing or something else.
buy a jig and it will work.
you wrote you see the samsung logo - that means, that the bootloader is OK.
happy flashing ;-)
schokibaerchen said:
The download mode will work!
the only exception is a hardware defect.
you can't get an hardware defect by flashing.
the bootloader (3 button or jig) will work.
there is no way to kill the hardware during flashing or something else.
buy a jig and it will work.
you wrote you see the samsung logo - that means, that the bootloader is OK.
happy flashing ;-)
Click to expand...
Click to collapse
Yes. But if your phone totally does not response, it might be a dead bootloader too. thats what i meant.
Sent from my Galaxy Note using xda premium
My N7000 is totally dead, it wont start up, the screen keep turned off. No response.
Snoopyass said:
My N7000 is totally dead, it wont start up, the screen keep turned off. No response.
Click to expand...
Click to collapse
Well you can try the usb jig anyways, but if there is still no response there is no way out and you have to bring it to your local service partner or samsung, I think.
But one fact is good for you:
It doesn't response on anything you do. So that means it can't be read out and they'll not see that you've flashed it. They'll just change the mainboard and resend it to you. This happened to me with my samsung galaxy s.
I totally destroyed the bootloader and it won't response. I directly send it to samsung and they just change the mainboard, as I said.
For sure you doesn't have to pay anything, assumed you are in warranty.
I'm gonna buy a jig immediately, however all of them are indicated as for Galaxy S2. Will it work with galaxy note too, or should I keep looking something specific for Galaxy Note ?
It will work for you SGNote, too. Just go get one, and let us know what happened.
Hi all i have really messed up my note... i been trying to flash it and i bricked it now the phone will only get into download mode... Also i have 1 count on the custom rom... My question is i have booked the phone in with Samsung to get it fixed but when Samsung put the phone into download mode they will see the 1 count does that void my warranty ??? Will samsung fix it for me ???
You have voided your warranty
You need a USB jig to clear the counter
How did u brick the phone
Sent from my GT-N7000 using xda premium
If you can get into download mode, and can't you install an official ROM via pc odin?
Sent from my GT-N7000 using xda premium
There are two ways to remove the yellow triangle/binary count without a jig...I have a kernel, and I there is Triangle Away...
And if you can get into download mode, your phone is not bricked...just soft bricked. Flash a stock firmware...
smalmagal said:
There are two ways to remove the yellow triangle/binary count without a jig...I have a kernel, and I there is Triangle Away...
And if you can get into download mode, your phone is not bricked...just soft bricked. Flash a stock firmware...
Click to expand...
Click to collapse
triangle away not working in gingerbread
Sent from my GT-N7000 using Tapatalk
Easiest way is
If you are able to get into download mode
1. Flash Stock ROM with PC odin
2. get root N install ICS base custom ROM
3.Use triangle away to reset counter
4 Back to Stock ROM
Framedtrash said:
You have voided your warranty
You need a USB jig to clear the counter
How did u brick the phone
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
Dude its a long story first i tried rooting my note and that failed to root but i lost all connectivity to GSM & 3G Networks i couldn't make calls or send SMS so then i flash ICS i still had the same problem no network connectivity then i flashed 2.3.5 i still had no network connectivity then i updated my note to 2.3.6 via ABOUT SOFTWARE UPDATE after the update i still had no network connectivity then i tried to re-flash 2.3.5 thats when it got bricked now when i turn on my phone i have the following message --> FIRMWARE UPGRADE ENCOUNTERED AN ISSUES. PLEASE SELECT RECOVERY MODE IN KIES & TRY AGAIN.. Plus 1 binary count.. Thanks
dr.ketan said:
Easiest way is
If you are able to get into download mode
1. Flash Stock ROM with PC odin
2. get root N install ICS base custom ROM
3.Use triangle away to reset counter
4 Back to Stock ROM
Click to expand...
Click to collapse
dude it keeps failing every time i try to flash it i have attached a pic of odin Thanks
SpyderTracks said:
If you can get into download mode, and can't you install an official ROM via pc odin?
Sent from my GT-N7000 using xda premium
Click to expand...
Click to collapse
odin keeps faling im on mac using VMware Fusion running windows 7 ultimate ??? Thanks
Your device gets failed while flashing factoryfs
this is not good sign
Try on window machine.
Wasn't there a kernel version which zeroes the binary counter from angelom (following the bricking fiasco)? Someone might still have it
Sent from my GT-N7000 using Tapatalk 2 Beta-5
mfractal said:
Wasn't there a kernel version which zeroes the binary counter from angelom (following the bricking fiasco)? Someone might still have it
Sent from my GT-N7000 using Tapatalk 2 Beta-5
Click to expand...
Click to collapse
Please if you know any one please give me a shout... Thanks Dude
N1NJATH3ORY said:
Please if you know any one please give me a shout... Thanks Dude
Click to expand...
Click to collapse
you could pm angelom about it.
Just make sure you know what you're doing.
Kernel to get rid of Yellow Triangle/Binary Count.
smalmagal said:
There are two ways to remove the yellow triangle/binary count without a jig...I have a kernel, and I there is Triangle Away...
And if you can get into download mode, your phone is not bricked...just soft bricked. Flash a stock firmware...
Click to expand...
Click to collapse
Where can I get the kernel you mentioned that could reset the binary count without using a USB JIG? Appreciate if you can point me the download site. I'm using an Asian unit GN7000.
Many thanks in advance for your kind help.
Regards,
Danny.
N1NJATH3ORY said:
dude it keeps failing every time i try to flash it i have attached a pic of odin Thanks
Click to expand...
Click to collapse
Have you tried setting pit and repartition?
That will reformat the partition tables
Sent from my iPad using Tapatalk
dannche said:
Where can I get the kernel you mentioned that could reset the binary count without using a USB JIG? Appreciate if you can point me the download site. I'm using an Asian unit GN7000.
Many thanks in advance for your kind help.
Regards,
Danny.
Click to expand...
Click to collapse
Hi dude here is the message angelom sent to me its got the link to the Kernel Enjoy
So here is the link kernel that reset counter and remove yellow triangle:
http://www.mediafire.com/?5bmrc6cf81w5mya
Of course this is what I tried last night and it was fine (flashed over 10 times)
instructions:
It 'a tar file, then flashed it with Odin Pc
You need to have ICS, so if you tried to install GB with odin, you have to flash the Chinese leak ICS (always with odin)
Even if you flash the rom from error, after trying to install, always installs with odin the kernel, it usually also with your problem is successful.
Just you see that phone reboot (just odin gives you the message that the flash of the kernel has been successful) disconnect the usb cable and press once the keys to enter the recovery mode (Vol + + home + power) and keep them pressed until do not see the recovery.
You'll still have the yellow triangle.
When did you get into recovery (still touch CWM) touch on reboot
So, even if eventually the Rom should not start it for the problem of partitions, you'll see that the triangle is gone and the counter is reset.
Of course you do so at your own risk, given my experience after what has happened, I emphasize.
N1NJATH3ORY said:
Hi dude here is the message angelom sent to me its got the link to the Kernel Enjoy
So here is the link kernel that reset counter and remove yellow triangle:
http://www.mediafire.com/?5bmrc6cf81w5mya
Of course this is what I tried last night and it was fine (flashed over 10 times)
instructions:
It 'a tar file, then flashed it with Odin Pc
You need to have ICS, so if you tried to install GB with odin, you have to flash the Chinese leak ICS (always with odin)
Even if you flash the rom from error, after trying to install, always installs with odin the kernel, it usually also with your problem is successful.
Just you see that phone reboot (just odin gives you the message that the flash of the kernel has been successful) disconnect the usb cable and press once the keys to enter the recovery mode (Vol + + home + power) and keep them pressed until do not see the recovery.
You'll still have the yellow triangle.
When did you get into recovery (still touch CWM) touch on reboot
So, even if eventually the Rom should not start it for the problem of partitions, you'll see that the triangle is gone and the counter is reset.
Of course you do so at your own risk, given my experience after what has happened, I emphasize.
Click to expand...
Click to collapse
I would be super very mega careful with this one.
ONLY USE IF YOU ARE HARDBRICKED AND HAVE NOTHING TO LOSE!
+1!!!
Sent from my GT-N7000 using xda premium
Samsung phoned me today they found out my phone had been rooted.. They gave me 2 options 1st option cost £33.00 flashing software if that doesn't work 2nd option £160.00 replace the board **** this phone is costing me a arm and a leg if the first option doesn't work Dam SAMSUNG....
N1NJATH3ORY said:
Samsung phoned me today they found out my phone had been rooted.. They gave me 2 options 1st option cost £33.00 flashing software if that doesn't work 2nd option £160.00 replace the board **** this phone is costing me a arm and a leg if the first option doesn't work Dam SAMSUNG....
Click to expand...
Click to collapse
how did they find out, didn't you zero the flash counter and remove the triangle ?
Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
nothing on screen
yagnesh55 said:
Please help me out on this....
(Sorry if I posted in wrong section)
I successfully upgraded my Pop to gingerbread 2.3.6 and rooted it. It was working fine for some days after which It got messed up
when I updated the titanium backup app from the market. The app asked for some su permissions and suddenly the screen went blank.
After that I realized that its a hard bricked. The screen is blank whatever I do. I searched for many tutorials to unbrick it but no fruitful results yet.
I tried a lot to enter download mode and after several attempts luckily the three button combo worked and it got shown in ODIN on some port connected.
When I started the process of firmware upgrade it gets stuck in "Connection Setup Phase".
Does USB Jig method is worth trying in this situation ??
Pease tell me the solution of it. I am attaching the screenshot of the ODIN. Please Please Please help.
Thanks a lot in advance...
Click to expand...
Click to collapse
dheeraj (dhlalit11) said:
what is on your mobile screen download mode or something like phone--!--computer picture
ok whatever try this
close Odin, turn off mobile, start Odin and put files turn on mobile in download mode connect the cable and start flashing
PS : phone--!--conputer shows on the screen when upgrade get fail, not to worry it is just like another version of Odin
until you can light up the mobile its not a hard brick
I will suggest you to use firmware which are available without bootloader as you were previously on gb, just to remove the risk of hard brick
Click to expand...
Click to collapse
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
yagnesh55 said:
There is nothing shown on my screen...
no computer like symbol....
nothing whatever i do...
It just goes sometimes in download mode when the 3 button combos is pressed (very rarely), gets detected by ODIN but stucks on connection error...
Click to expand...
Click to collapse
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
It Doesnt Help
galaxy mini said:
First of all delet all drivers on pc and install them new, just to be on the save side! Then get firmware for your country i suggest you to use 4file pack no the 1file ones! Then get odin v4.38 put your device in download mode and conect to pc put all 4files in the right place in odin and start flashing!! It should not take longer then 6min!! Let odin finish when you see blue pass disconect and be lucky!!
Sent from my GT-S5570 using xda premium
Click to expand...
Click to collapse
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
yagnesh55 said:
I tried this thing many times but still ODIN stucks on connection setup...
Also tried on different machine...
Please help....
Click to expand...
Click to collapse
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
tietganFTW said:
Have you tried using a different port? Or a different cable? Also, try unchecking the reset time option on ODIN.
Click to expand...
Click to collapse
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
dheeraj (dhlalit11) said:
there are two data cables of the same shape but their holes (which goes in mobile port) are of different size try the data cable whose hole is much big
I will try to post a pic
in short use the original Samsung one
Click to expand...
Click to collapse
ya I got ur point regarding the port size...
I m using the port of samsung original having big hole....
sanjay.ghanchi said:
1st try flashing cwm via odin n then wipe data wipe sd partition n then go to stock rom via odin
Click to expand...
Click to collapse
The screen is completely blank whatever I do so I cant do these steps ....
debanikonline said:
Flash Stock Rom for ur device using odin..... Please do not do any thing you area not aware of..
Files the steps and will make ur device ok
Click THANKS button if I helped, or u liked my post.
Will be honored.
Click to expand...
Click to collapse
Ya m flashing stock ROM using ODIN but it gets stuck on connection setup stage forever (see attached file)...
Please help...
Anyone having idea if USB jig work in this case...
yagnesh55 said:
Anyone having idea if USB jig work in this case...
Click to expand...
Click to collapse
USB jig only boots mobile in download mode
but you are saying you can sometimes boot in download mode so no use of USB jig is required
you should take it to samsung
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
chemicalrage said:
Weird. I dont know how you could brick your phone with titanium backup app.
Your battery could be dead. Charge your phone for 2 hours.
Then try using Odin using a different USB Port.
Click to expand...
Click to collapse
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
yagnesh55 said:
Nop I charged my battery full with another battery charger before using ODIN but still the problem persist.
I think I have to take it to Samsung service center but my warranty is over so I think they will take a huge amount
to fix it.
Anyone still having some idea on this...
Pease help...
Click to expand...
Click to collapse
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Service Centre Sucks
amxthan0 said:
Dude We are On the Same Boat I Tryed Searching With All My resources But Now There Is Only 1 Option Left for Me to Visit to a Service Center
Click to expand...
Click to collapse
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
yagnesh55 said:
I gave my phone to service centre (warranty is over ) before few days and they told than some connector in the circuit is damaaged and need to be replaced with new
one and its cost is 4278 INR . Can u believe that ??? 4278 bucks. Its better to buy a new phone.
Click to expand...
Click to collapse
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Galaxy_Rohit said:
You should have tried another stock firmware or another USB port when your phone luckily entered download mode. Same problem happene with me & get solved by flashing another stock firmware.
Sent Via XDA™ Premium
Click to expand...
Click to collapse
Tried every damn thing but ODIN gets stuck on connection setup step....