Database Develop

[q] heeeelp!!! Please!

I have just bought galaxy s and i flashed to jm5 then used samset 1.9f then i think i have some fixlag on. BUT SUDDENLY WHEN I TRY TO REFLASH TO JM5 MY SGS GOT BROKEN??? i took some pic but how i add them here //sorry i am very new user
On screen all iget for options is these:
Android system recovery <2e>
Samsung Recovery Utils
- for BML-
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
----------------------------------------------
update media. please wait...
E:Can't mount /dev/block/st110
(invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
copy default media content failed.

Have you tried to reflash your Galaxy with Odin?
Downloads:
Odin
JM5 Firmware PASS: samsung-firmwares.com
PIT 512
Howto:
1.Open ODIN. (And close Kies, if you have it open. It is important to have ODIN open BEFORE connection the phone via USB!)
2.Select the PDA/Modem/CSC/.PIT files in Odin. (PDA=CODE, .PIT and PDA are required. CSC and Modem are HIGHLY recommended. They may be necessary depending on the PDA! Try flashing all three BEFORE reporting bugs, if you only used one initially!)
3.Remove the SD card and SIM card from the phone.
4.Turn the phone into the download mode by pressing and holding VolumeDown+Home+Power.
5.Connect your phone with your computer and wait until the drivers are installed.
6.If the drivers are installed, click Start.
7.The phone will be flashed and once it’s finished, it will boot up. (Do NOT disconnect the usb-cable, remove the battery or otherwise interrupt this process!)
8.You have successfully flashed your phone.
http://forum.xda-developers.com/showthread.php?t=723596

Your SGS is not broken you are just doing things without the right knowlegde.
Don't do things you don't understand !!!
Read before you do something !!!

Yes i have flashed mtimes with odin and successfully but this time its differrent i can't flash any rom and i keep having that error above

Welll it worked when i changed the .pit file which came with Odin to your .pit file and mine was 513 yours 512...but at the end when it booted there was one red line about some sytem ... it went fast so i could'nt read it but anyway thnx alot

You always have to use the correct PIT File for a Firmware.
Look at this:
http://samsung-firmwares.com/I9000.htm
Please read the FAQ Thread. ;-)

RTFM
10char

[Q] i9000 can not boot

last week
i used i9000 to download software with wifi
because the battey was low , so it turned off~
then i took another battery ...
but my i9000 stuck on "I9000" screen again and again ~
i flash 2.2 rom,but the problem still go on
my i9000 don't have external SD Card
because it has 16GB internal SD Card
my question is : 1.i can use recovery mode , download mode is good
but after falsh 2.2 rom it display this notice
"E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(invalid argument)
something went wrong while doing the lagfix. sorry"
2.i use 2.1 rom to falsh ,then it display this
"date wipe failed"
then i can use recovery mode
but when i use :update.zip , it notice
"(I/O error)
" E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)"
could anyone help me pleeeeeeeeeease~~~~~
what'up with it?
The internal SD Card is bad? i need to change it ?

Help~~ ~
thanks a lot

So you can't turn it on even after flashing eclair?
Did you try ticking repartition?
Sent from my GT-I9000 using XDA App

snapper.fishes said:
So you can't turn it on even after flashing eclair?
Did you try ticking repartition?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
yes .i tick re-repartition , and it can't start after flashing 2.1 rom or 2.2 rom
somebody said "when some date is writing during the voodoo runing,at that time power off by accident could make SD Card block"
"E:\" can't wipe , how can i fomat E: partition ?
i'm keeping on wait
thank you

lets get this correct download mode works
Flashed to Eclair but still fails to boot as voodoo was enabled /is enabled .
Therefore phone cannot be seen by PC and cannot boot to format .
can you get into clockwork recovery mode and format from that and wipe all data .
You said
i used i9000 to download software with wifi
because the battey was low , so it turned off~
What software was this you downloaded .
You get no other answers it will have to be a Samsung service centre .
jje

JJEgan said:
lets get this correct download mode works
Flashed to Eclair but still fails to boot as voodoo was enabled /is enabled .
Therefore phone cannot be seen by PC and cannot boot to format .
can you get into clockwork recovery mode and format from that and wipe all data .
You said
i used i9000 to download software with wifi
because the battey was low , so it turned off~
What software was this you downloaded .
You get no other answers it will have to be a Samsung service centre .
jje
Click to expand...
Click to collapse
thank you very much ~
i'm not good at English , so "Eclair" means 2.1 rom ?
1. when it turn off i can't get in recovery mode ,so voodoo is enabled when i flashed 2.2 rom .
2. i used a software named "UC xunlei" to down a salmpe 720P RMVB video at that time . then it turned off.
3. clockwork recovery can't use . only samsung recovery mode can get in.
4. my i9000 was sending to Samsung service centre yesterday, but they said "maybe they can't repair it either"
"sigh................."

I'll try to walk you through step by step through a method that has never failed..If it still fails then your internal SD might have issues..
1. Download XXJPU firmware from samfirmware.com
http://www.multiupload.com/PUSOOBQ8K5
The password to this zip file is: samfirmware.com
Once the file is extracted, you will have 4 files in it:
GT-I9000-CSC-MULTI-OXAJPU.tar.md5
I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
MODEM_I9000XXJPU.tar.md5
s1_odin_20100512.pit
2. Open Odin
Download here: http://db.tt/QuA1G6s
That is a sure working Odin. The one I use. Extract that and run Odin3 v1.3.exe
3. In Odin:
check Re-Partition
Click PIT and select s1_odin_20100512.pit
Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5 The file that has MODEM in its file name.. SORRY!!!!!
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Do not touch any of the other options. Leave them the way they are.
3. Exit Kies (make sure it is not running AT ALL).
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
5. Click START in Odin... if Odin gets stuck for a LONG time (progress bar isn't moving at all in both phone and Odin).. unplug phone, pull battery, restart computer and repeat from step 2.
6. Once Odin says it succeeded wait for phone to reboot.
7. If you still encounter the same error then report back here... I might have another idea. Hopefully you don't get the error again though...
Edit:
If that fails you can read this guy's post..
This guy seemed to have been lucky and got is supposed dead I9000m SGS working again. Here's his procedure:
http://forum.xda-developers.com/showthread.php?t=905975
Worth a shot.

anoneemooz~ thank you ~~
i'll try ~
i hope what you said can get my i9000 back~

anoneemooz said:
I'll try to walk you through step by step through a method that has never failed..If it still fails then your internal SD might have issues..
1. Download XXJPU firmware from samfirmware.com
http://www.multiupload.com/PUSOOBQ8K5
The password to this zip file is: samfirmware.com
Once the file is extracted, you will have 4 files in it:
GT-I9000-CSC-MULTI-OXAJPU.tar.md5
I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
MODEM_I9000XXJPU.tar.md5
s1_odin_20100512.pit
2. Open Odin
Download here: http://db.tt/QuA1G6s
That is a sure working Odin. The one I use. Extract that and run Odin3 v1.3.exe
3. In Odin:
check Re-Partition
Click PIT and select s1_odin_20100512.pit
Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Do not touch any of the other options. Leave them the way they are.
3. Exit Kies (make sure it is not running AT ALL).
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
5. Click START in Odin... if Odin gets stuck for a LONG time (progress bar isn't moving at all in both phone and Odin).. unplug phone, pull battery, restart computer and repeat from step 2.
6. Once Odin says it succeeded wait for phone to reboot.
7. If you still encounter the same error then report back here... I might have another idea. Hopefully you don't get the error again though...
Edit:
If that fails you can read this guy's post..
This guy seemed to have been lucky and got is supposed dead I9000m SGS working again. Here's his procedure:
http://forum.xda-developers.com/showthread.php?t=905975
Worth a shot.
Click to expand...
Click to collapse
That solution looks fine but i'm in worst situation ever since i can't do this:
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
My phone is stuck in the fisrt screen.( with this text Samsung Galaxy s i-I9000)
i can't enter in download mode, i also noticed that even the battery icon doesn't show up i only get loading icon not the battery one. Please help.

damnit, i tried the method anoneemooz posted. But Odin just stops after a couple of minutes flashing, and gave me the error message: Couldn't write to...
I can go in download modus and in recovery mode, but i cannot flash a ROM. I tried a couple of 2.2.1 ROMS

it dispaly " DATA_LOOP=FALSE CACHE_LOOP=FALSE DBDATA_LOOP=FALSE BIND_DATE_TO_DBDATA=FALSE"
now, i still can't wipe or fomat my internal SD Card
notice"E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(invalid argument)"
also it shows "Error mounting /mnt/sdcard/ android_secure!
Skipping format..."

Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Should that not be MODEM_I9000XXJPU.tar.md5
Ignore it if i am wrong .
jje

JJEgan said:
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Should that not be MODEM_I9000XXJPU.tar.md5
Ignore it if i am wrong .
jje
Click to expand...
Click to collapse
Oops yeah sorry..copy pasted the wrong thing for that part.
To OP: It seems as though you have a dead internal SD unfortunately..Well I could be wrong.

3 Button Fix for any firmware of SGS:
http://forum.xda-developers.com/showthread.php?t=785201
To all who run into Odin problem:
SORRY!!! For PHONE it should be the file that says MODEM in its filename. Copy pasted wrong name.

Download jg5 from samefirmware.com
Close everything relatet to keys and nps. Check in the tray and close if its running there. Use Odin3 v 3.1 and make sure u put the files in the right place:
PDA=Code
Phone=Modem
CSC=CSC
As pit download 512.pit
Check repartition.
AFTER tgis put ur phone in download mode and connect it.
Thrn click start and let it do its thing. If it doesnt work just try 3 or 4 times. Always been able to fix the error u get like this
Edit: or just check this out:
url]http://forum.xda-developers.com/showthread.php?t=845708[/url]
Sent from my GT-I9000 using Tapatalk

i9000m is semi bricked??? tried everything plz help

I've been searching through countless forums and tried everything to reflash mine back to stock or atleast a stable custom rom. When i boot my phone after its done with odin it never passes the galaxy s Gt-i9000 screen. I tried using odin with dark's resurection and 2.2 stock but nothing works. The phone can't go into clockwork recovery either. Reading the other threads its possible that the one click lag fix may have something to do with this. So please help me..... ohh and btw its a bell i9000m
Thanks
also phone can go into download mode so there has to be a way to fix it

Download your tree file stock rom for odin, use 512pit and check repartition in odin.
Remember it thakes som time too boot first time.
I'm on latest jvr and its running good.
Sent from my GT-I9000 using Tapatalk

RobertSand said:
Download your tree file stock rom for odin, use 512pit and check repartition in odin.
Remember it thakes som time too boot first time.
I'm on latest jvr and its running good.
Sent from my GT-I9000 using Tapatalk
Click to expand...
Click to collapse
Whats the tree file stock rom? do you mean my carriers stock rom? where can i get that?
sorry im a serious noob (bought the phone yesterday).

wutang780 said:
Whats the tree file stock rom? do you mean my carriers stock rom? where can i get that?
sorry im a serious noob (bought the phone yesterday).
Click to expand...
Click to collapse
three file rom = rom with PDA.tar, Phone (Modem).tar and CSC.tar

As long as you can get into download mode, your phone is recoverable.
Check here for the latest i9000M three file firmware: http://forum.xda-developers.com/showthread.php?t=1022445
Flash that with repartition using 512.pit and report back
Sent from my i9000M via XDA app

i've now finally got to the android system recovery 3e menu but all the errors on it has to do with the internal sd. i get.....
-- Copying media files....
E:failed to mount /sdcard (file exists)
E:copy_dbdata_media:Can't mount /sdcard
Your storage not prepared yet. please use UI menu for format and reboot actions.
meida files copy failed.
--Wiping data...
Formating /data...
E:format_volume:rfs format failed on /dev/block/mmcblk0p2
formatting /dbata...
formating /cache...
Data wiped failed.
-- Appling Multi-csc
Installing Multi-csc
Can't access to '/system/csc/tmk/system/"-
Successfully applied multi-csc.
E:failed to mount /sdcard (file exists)
E:failed to mount /sdcard (file exists)
E:failed to mount /sdcard (file exists)

You flashed it with re-partition ?

Progress... I have also had that "cannot mount mmcblk0pX" error. This post should fix it: http://forum.xda-developers.com/showthread.php?t=984140
Flash that through Odin and your phone should work.
Sent from my i9000M via XDA app

krazykipa said:
As long as you can get into download mode, your phone is recoverable.
Check here for the latest i9000M three file firmware: http://forum.xda-developers.com/showthread.php?t=1022445
Flash that with repartition using 512.pit and report back
Sent from my i9000M via XDA app
Click to expand...
Click to collapse
okay thanks i will try it and report back!

@ dfolt i didn't flash with re-partition.
@krazykipa wheres does that file fit into odin? where do i put it? and do i re-partition?

Put the tar file in the PDA slot. I think it doesn't really matter where you put the files as they're automatically flashed to the right place, though I could be wrong.
Sent from my i9000M via XDA app

krazykipa said:
Put the tar file in the PDA slot. I think it doesn't really matter where you put the files as they're automatically flashed to the right place, though I could be wrong.
Sent from my i9000M via XDA app
Click to expand...
Click to collapse
okay i flashed with those files and now i have the same can't mount issue. it also says storage isnt perpared yet. And when i reboot i get this........ http://www.youtube.com/watch?v=mnrh2jEpNxo&feature=related thats what happens to my phone.

If I were you I would go on samfirmware.com to get a safe firmware download and JVQ which is 2.3.4 then download talon kernel 4.3 and flash via Odin, then download juwes rom 5.2 and flash via CWM. this is a very fast and stable rom with great battery life. This rom combined with the legend x fusion 3.0 theme is just awesome. I know juwes 5.3 is out now but I still reccomend 5.2 also juwes uses semaphore kernel as a default but I use the talon kernel its awesome. Good luck!
Sent from my Transformer TF101 using XDA Premium App

Galaxy is dead? :(

My ga iworking. I can not flahses no ROM.
This is it:
Installin

can u get downloading mode or not?

yes i can put in download mode. I flashed dbdata.rfs but not working

Neznam said:
My galaxy i9000 is not working. I can not flahses no ROM.
This is it:
Installing update...
...
...
--copying media files...
E: filed to mount /sdcard(File exists)
E:copy_dbdata_media:Cant mount sdcard
you storage not prepared yet, please use UI men u for format and reboot actions,
Meida files copy filed.
Wiping data...
Formating data...
E:Format_volume:rfs format failed on/dev/block/mmcblk0p2
Formating /dbdata
Formating /cashe
Deleting Meta Data
Data wipe Failded.
Click to expand...
Click to collapse
if u can get to download mode just flash it via odin

I tried this

pretisni i drzi Power + Volume down i home sve u jedno dok ti se ne pojavi DOWNLOAD moze frajer sa lopatom.
onda pokrenes ODIN program skines ne odradjeni cumstom sa PDA ,PHONE i SSC
i cekiras prozor sa re-patition i start

Try flashing via odin with pda, phone, Modem files..
Which Rom are you trying to flash?
Edit:
http://forum.xda-developers.com/showthread.php?t=1119086
Sent from my GT-I9000 using XDA App

I trying
XXJVU, XXJVK(2.3) and other roms.....

Does anyone know

What firmware you're using at the moment?

XXJVK 2.3.3

And you tried to flash newer stock firmware (JVU) with Odin?
CODE = PDA
MODEM = PHONE
CSC = CSC
Just put those files in and start.

Yes...

Have you tried to flash it with CMW?

the i9000 can't be dead the best phone

Odin flash with pit-file as well?

doawnload XWJVZ stock rom enter in dowload mode open Odin select pit file put in pit file in odin select repartion and flash; then remove battery and again enter in doawnload mod and in odin put ABOOT file in BOOTLADER ,CODE in PDA,MODEM in PHONE,
CSC in CSC and flash (NOT check repartion in Odin) good lock

can not. I tried 1000 times and can not
My only chance is to transfer ROM to external card and flashing ROM with CWM. It may be ok?

Roms should be flashed form internal sd card.
Do you use rfs file system maybe you have something else and that can cause problem.

I have no idea what I use but I know that nothing can adjust.

[Q] samsung galaxy boot problem

hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me

ivojima1970 said:
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
Click to expand...
Click to collapse
Would be great if you tried to explain what you tried to do with odin anyway.
what rom you tried to install?

ivojima1970 said:
hi , i have problem with samsung galaxy s i9000 , when i start phone appears first samsung logo and goes in black screen , then over again non stop . Phone go into download mode and root menu , I start odin 1,85 and i set a new flash and everything else he wrote at the end " finish ok" , restarted phone and again nothing , please help me
Click to expand...
Click to collapse
Who says?
Which Rom are you trying to use and what are you coming from?
If flashing ODIN for JVU Rom :
Use ODIN with PIT File
PIT File Incase you need it : LINK
Open Odin and select 512 .PIT, and put in your files for : CSC, PDA, MODEM.
Check Re-partition and don't touch any other settings.
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER.
Attach Phone
When you have all the files needed in ODIN, say JVU Rom for example as thats what we are using here
Click Start let it Run
Once complete you will see S logo on phone
Unplug Phone > Let it power up then Power Off > Again into Download mode
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted *File is included in ODIN Files*
Same again when you see S Logo on Phone unplug Phone Cable
Close ODIN
Let phone boot up ....
What I do now is go into
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Before doing this make sure you have what you need from the phone as it will ERASE everything!
Enable USB Debugging by going to Settings > Applications > Development > Check USB Debugging
Plug in Phone and copy over your chosen Custom ROM that you want
Reboot into Recovery : VOL UP + MENU + POWER
Wipe the 4 things (probably know these... you should do)
If not you choose these by using the left side keys on the phone and to apply changes click Menu key
WIPE : data/factory reset > cache partition
Scroll down and go to advanced
Dalvik Cache > Battery stats
Go Back
Install ZIP (ROM) from Zip Card
Reboot Phone when complete... DONE!
Hope this helps a lot of people if not just ask here if you are still having issues to save peole posting same questions again and again

I made up the first part, but after the phone went into recovery mode
The screen shows the following:
installin update ...
successfully installed package.
- Copying media files ...
e: failed to mount / sdcard (file exists)
e: copy_dbdata_media: cant mount / sdcard your storage not prepared yet. please use meny VI for format and reboot actions.
meida files copy failed.
- Wiping data ...
Formatting / data ...
e: format_volume: rfs format failed on / dev/block-mmcblkqp2
Formatting / dbdata ...
Formatting / cache ...
deleting meta data
Data wipe failed.
- Appling Multi-CSC ...
installing multi-csc
Cant access to / system / csc / eng / system /.
successfuly applied multi-csc.

Flash dbdata.rfs as PDA in Odin 1.85. Reboot. Congratulate yourself.
Sent from my GT-I9000 using Tapatalk 2

Helpppp
I have exactly the same problem. I had froyo 2.2 im new to this odin all these settings. Yesterday i was tried rooting my phone and I did. but after I mounted a courrupted rom from the recovery. and my android doesn't want to load. I followed the same instructions you just gave him. on these posts but now when i turn on the phone its the logo comes and nothing loads. Only Downloading VOL DWN + MENU + PW is working.

Are you talking to me devildrake? No, your problem is different and you need to flash the rom again too, not just dbdata lol. Do this.
Flash Gingerbread, in Odin (I always used JW4 but JVU will be fine) with 512 pit file and repartition checked. Untick reboot. Once its finished, unplug the USB cable and take the battery out. Put the battery back in and boot into download mode. Reset Odin. USB cable back in. Tick reboot again. Put dbdata.rfs in PDA. Flash.
Should boot into gingerbread. I've done this a LOT of times... Then you can go back to Odin and root.
If that doesn't work then I'd download a different version of GB, download new 512 pit, and download a new dbdata.rfs. Must be one of those corrupt.
Sent from my GT-I9000 using Tapatalk 2