Database Develop

[q] heeeelp!!! Please!

I have just bought galaxy s and i flashed to jm5 then used samset 1.9f then i think i have some fixlag on. BUT SUDDENLY WHEN I TRY TO REFLASH TO JM5 MY SGS GOT BROKEN??? i took some pic but how i add them here //sorry i am very new user
On screen all iget for options is these:
Android system recovery <2e>
Samsung Recovery Utils
- for BML-
reboot system now
apply sdcard:update.zip
wipe data/factory reset
wipe cache partition
----------------------------------------------
update media. please wait...
E:Can't mount /dev/block/st110
(invalid argument)
E:copy_dbdata_media:Can't mount DBDATA:
copy default media content failed.

Have you tried to reflash your Galaxy with Odin?
Downloads:
Odin
JM5 Firmware PASS: samsung-firmwares.com
PIT 512
Howto:
1.Open ODIN. (And close Kies, if you have it open. It is important to have ODIN open BEFORE connection the phone via USB!)
2.Select the PDA/Modem/CSC/.PIT files in Odin. (PDA=CODE, .PIT and PDA are required. CSC and Modem are HIGHLY recommended. They may be necessary depending on the PDA! Try flashing all three BEFORE reporting bugs, if you only used one initially!)
3.Remove the SD card and SIM card from the phone.
4.Turn the phone into the download mode by pressing and holding VolumeDown+Home+Power.
5.Connect your phone with your computer and wait until the drivers are installed.
6.If the drivers are installed, click Start.
7.The phone will be flashed and once it’s finished, it will boot up. (Do NOT disconnect the usb-cable, remove the battery or otherwise interrupt this process!)
8.You have successfully flashed your phone.
http://forum.xda-developers.com/showthread.php?t=723596

Your SGS is not broken you are just doing things without the right knowlegde.
Don't do things you don't understand !!!
Read before you do something !!!

Yes i have flashed mtimes with odin and successfully but this time its differrent i can't flash any rom and i keep having that error above

Welll it worked when i changed the .pit file which came with Odin to your .pit file and mine was 513 yours 512...but at the end when it booted there was one red line about some sytem ... it went fast so i could'nt read it but anyway thnx alot

You always have to use the correct PIT File for a Firmware.
Look at this:
http://samsung-firmwares.com/I9000.htm
Please read the FAQ Thread. ;-)

RTFM
10char

[Q] i9000 can not boot

last week
i used i9000 to download software with wifi
because the battey was low , so it turned off~
then i took another battery ...
but my i9000 stuck on "I9000" screen again and again ~
i flash 2.2 rom,but the problem still go on
my i9000 don't have external SD Card
because it has 16GB internal SD Card
my question is : 1.i can use recovery mode , download mode is good
but after falsh 2.2 rom it display this notice
"E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(invalid argument)
something went wrong while doing the lagfix. sorry"
2.i use 2.1 rom to falsh ,then it display this
"date wipe failed"
then i can use recovery mode
but when i use :update.zip , it notice
"(I/O error)
" E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)"
could anyone help me pleeeeeeeeeease~~~~~
what'up with it?
The internal SD Card is bad? i need to change it ?

Help~~ ~
thanks a lot

So you can't turn it on even after flashing eclair?
Did you try ticking repartition?
Sent from my GT-I9000 using XDA App

snapper.fishes said:
So you can't turn it on even after flashing eclair?
Did you try ticking repartition?
Sent from my GT-I9000 using XDA App
Click to expand...
Click to collapse
yes .i tick re-repartition , and it can't start after flashing 2.1 rom or 2.2 rom
somebody said "when some date is writing during the voodoo runing,at that time power off by accident could make SD Card block"
"E:\" can't wipe , how can i fomat E: partition ?
i'm keeping on wait
thank you

lets get this correct download mode works
Flashed to Eclair but still fails to boot as voodoo was enabled /is enabled .
Therefore phone cannot be seen by PC and cannot boot to format .
can you get into clockwork recovery mode and format from that and wipe all data .
You said
i used i9000 to download software with wifi
because the battey was low , so it turned off~
What software was this you downloaded .
You get no other answers it will have to be a Samsung service centre .
jje

JJEgan said:
lets get this correct download mode works
Flashed to Eclair but still fails to boot as voodoo was enabled /is enabled .
Therefore phone cannot be seen by PC and cannot boot to format .
can you get into clockwork recovery mode and format from that and wipe all data .
You said
i used i9000 to download software with wifi
because the battey was low , so it turned off~
What software was this you downloaded .
You get no other answers it will have to be a Samsung service centre .
jje
Click to expand...
Click to collapse
thank you very much ~
i'm not good at English , so "Eclair" means 2.1 rom ?
1. when it turn off i can't get in recovery mode ,so voodoo is enabled when i flashed 2.2 rom .
2. i used a software named "UC xunlei" to down a salmpe 720P RMVB video at that time . then it turned off.
3. clockwork recovery can't use . only samsung recovery mode can get in.
4. my i9000 was sending to Samsung service centre yesterday, but they said "maybe they can't repair it either"
"sigh................."

I'll try to walk you through step by step through a method that has never failed..If it still fails then your internal SD might have issues..
1. Download XXJPU firmware from samfirmware.com
http://www.multiupload.com/PUSOOBQ8K5
The password to this zip file is: samfirmware.com
Once the file is extracted, you will have 4 files in it:
GT-I9000-CSC-MULTI-OXAJPU.tar.md5
I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
MODEM_I9000XXJPU.tar.md5
s1_odin_20100512.pit
2. Open Odin
Download here: http://db.tt/QuA1G6s
That is a sure working Odin. The one I use. Extract that and run Odin3 v1.3.exe
3. In Odin:
check Re-Partition
Click PIT and select s1_odin_20100512.pit
Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5 The file that has MODEM in its file name.. SORRY!!!!!
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Do not touch any of the other options. Leave them the way they are.
3. Exit Kies (make sure it is not running AT ALL).
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
5. Click START in Odin... if Odin gets stuck for a LONG time (progress bar isn't moving at all in both phone and Odin).. unplug phone, pull battery, restart computer and repeat from step 2.
6. Once Odin says it succeeded wait for phone to reboot.
7. If you still encounter the same error then report back here... I might have another idea. Hopefully you don't get the error again though...
Edit:
If that fails you can read this guy's post..
This guy seemed to have been lucky and got is supposed dead I9000m SGS working again. Here's his procedure:
http://forum.xda-developers.com/showthread.php?t=905975
Worth a shot.

anoneemooz~ thank you ~~
i'll try ~
i hope what you said can get my i9000 back~

anoneemooz said:
I'll try to walk you through step by step through a method that has never failed..If it still fails then your internal SD might have issues..
1. Download XXJPU firmware from samfirmware.com
http://www.multiupload.com/PUSOOBQ8K5
The password to this zip file is: samfirmware.com
Once the file is extracted, you will have 4 files in it:
GT-I9000-CSC-MULTI-OXAJPU.tar.md5
I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
MODEM_I9000XXJPU.tar.md5
s1_odin_20100512.pit
2. Open Odin
Download here: http://db.tt/QuA1G6s
That is a sure working Odin. The one I use. Extract that and run Odin3 v1.3.exe
3. In Odin:
check Re-Partition
Click PIT and select s1_odin_20100512.pit
Check and click PDA and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Check and click CSC and select GT-I9000-CSC-MULTI-OXAJPU.tar.md5
Do not touch any of the other options. Leave them the way they are.
3. Exit Kies (make sure it is not running AT ALL).
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
5. Click START in Odin... if Odin gets stuck for a LONG time (progress bar isn't moving at all in both phone and Odin).. unplug phone, pull battery, restart computer and repeat from step 2.
6. Once Odin says it succeeded wait for phone to reboot.
7. If you still encounter the same error then report back here... I might have another idea. Hopefully you don't get the error again though...
Edit:
If that fails you can read this guy's post..
This guy seemed to have been lucky and got is supposed dead I9000m SGS working again. Here's his procedure:
http://forum.xda-developers.com/showthread.php?t=905975
Worth a shot.
Click to expand...
Click to collapse
That solution looks fine but i'm in worst situation ever since i can't do this:
4. Put your phone into DOWNLOAD mode (volume down + power + home) and plug into your computer
My phone is stuck in the fisrt screen.( with this text Samsung Galaxy s i-I9000)
i can't enter in download mode, i also noticed that even the battery icon doesn't show up i only get loading icon not the battery one. Please help.

damnit, i tried the method anoneemooz posted. But Odin just stops after a couple of minutes flashing, and gave me the error message: Couldn't write to...
I can go in download modus and in recovery mode, but i cannot flash a ROM. I tried a couple of 2.2.1 ROMS

it dispaly " DATA_LOOP=FALSE CACHE_LOOP=FALSE DBDATA_LOOP=FALSE BIND_DATE_TO_DBDATA=FALSE"
now, i still can't wipe or fomat my internal SD Card
notice"E:can't mount /dev/block/mmcblk0p1 (or /dev/block/mmcblk0)
(invalid argument)"
also it shows "Error mounting /mnt/sdcard/ android_secure!
Skipping format..."

Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Should that not be MODEM_I9000XXJPU.tar.md5
Ignore it if i am wrong .
jje

JJEgan said:
Check and click PHONE and select I9000XXJPU-REV03-PDA-low-CL747761.tar.md5
Should that not be MODEM_I9000XXJPU.tar.md5
Ignore it if i am wrong .
jje
Click to expand...
Click to collapse
Oops yeah sorry..copy pasted the wrong thing for that part.
To OP: It seems as though you have a dead internal SD unfortunately..Well I could be wrong.

3 Button Fix for any firmware of SGS:
http://forum.xda-developers.com/showthread.php?t=785201
To all who run into Odin problem:
SORRY!!! For PHONE it should be the file that says MODEM in its filename. Copy pasted wrong name.

Download jg5 from samefirmware.com
Close everything relatet to keys and nps. Check in the tray and close if its running there. Use Odin3 v 3.1 and make sure u put the files in the right place:
PDA=Code
Phone=Modem
CSC=CSC
As pit download 512.pit
Check repartition.
AFTER tgis put ur phone in download mode and connect it.
Thrn click start and let it do its thing. If it doesnt work just try 3 or 4 times. Always been able to fix the error u get like this
Edit: or just check this out:
url]http://forum.xda-developers.com/showthread.php?t=845708[/url]
Sent from my GT-I9000 using Tapatalk

[Q] Please your help!

Please , I need your help!
My Samsung Galaxy Tab 7'' after downgrade from 4.0.4 Ice cream sandwich to 2.4.3 Gingerbread version of android stuck on samsung logo and I see the below message during the flashing:
-Updating application
E:Failed to mount /data (Invalid argument)
E: install_application_for customer: Can't mount /data
your storage not prepared yet, please use UI menu for format and reboot actions.
Copy application failed.
What is the UI menu and how using it I can format and reboot my tablet?
The proccess that I used is:
1.open odin , check the checkboxes Re-Partition, Auto Reboot and F. Reset Time and put the .pit file on the PIT site and the .md5 on the PDA site and press start to begin the flashing after you put the tablet on the download mode (pressing together volume down and power buttons)
2.after flashing put your tablet again in download mode and this time check only Auto-Reboot and F. Reset Time and put the dbdata folder in PDA site and press again start.
3.After the second flashing put your tablet on Recovery mode (Pressing volume up and power buttons together) and choose first wipe cache and second wipe data factory reset ,choose yes to the question and choose Reboot to finish the process of flashing.
The above error message appears before the second step of this guide and as I told you before after flashing the tablet stays stack to samsung logo screen and doesn't go to the welcome screen.
If I delete all data of my tablet, can I reinstall them again, following the above guide with steps?
If yes, what is the tool to do this?

I found the solution by myself.
The solution is so easy.
As I told us before, I was remembering that when I had the same problem I had download from the internet a file and when I flashing my tab everything were done.
Searching I discover this file.
This file is: GT-P1000-CSC-SERJJ2.tar.
When you put this on the PDA site and flash your tab everything will be fine and your tab will unstuck from samsung logo screen and to go to the welcome screen to make your settings.

[q] help plz

Hello mate u ok ?
acctually i need ur help about my galaxy s i9000 i had stock rom 2.3.6 AD xxjw4 on my phone and then i update my phone to cm10.1 custom rom well now i am trying to revert back to stock rom i had download value pack from this site link below,
http://techdraginfo.blogspot.com/201...jw4-value.html
Now i am trying to flash my phone through odin but when its finshed it* my phone shows some erorrs in red* coloures
E:copy_dbdata_media:Can't mount /dbdata your storage not prepared yet, please use UI menu for format and reboot actions.
Meida files copy failed
-- Deleting files...
E: failed to mount /dbdata (File exists)
E: delete_data_files: Can't mount /dbdata your storage not prepared yet, please use UI menu for format and reboot actions.
--Updating filesystem...
E: failed to mount /dbdata (File exists)
E: discard_filesystem_for_rfs:Can't mount /dbdata
--Wiping cache...
Formatting /cache...
Cache wipe failed.
--Applying Multi-CSC...
Installing Multi-CSC
Applied the CDC-code 'CPW'
Successfully applied multi-CSC.
i also wipe factorty and cache but its not booting up galaxy s logo shows then auto reboot again again will u please help how to instal it again thanks?

Ok firstly the link you put up isnt found...
Use ODIN with PIT File
PIT File Incase you need it : LINK
Open Odin and select 512 .PIT, and CSC, PDA, MODEM-files. Check Re-partition and don't touch any other settings.
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER.
Then just flash the phone with your ROM of choice.
Any issues let me know

Want to know
EwOkie said:
Ok firstly the link you put up isnt found...
Use ODIN with PIT File
PIT File Incase you need it : LINK
Open Odin and select 512 .PIT, and CSC, PDA, MODEM-files. Check Re-partition and don't touch any other settings.
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER.
Then just flash the phone with your ROM of choice.
Any issues let me know
Click to expand...
Click to collapse
I want to know one thing Mate when i use PIT FILE and CSC , PDA , MODEM files after done it,should flash it again with any other stock rom of s i9000 ?

Rash732 said:
I want to know one thing Mate when i use PIT FILE and CSC , PDA , MODEM files after done it,should flash it again with any other stock rom of s i9000 ?
Click to expand...
Click to collapse
When you have all the files needed in ODIN, say JVU Rom click Start let it Run
Once complete you will see S logo on phone
Unplug Phone > Let it power up then Power Off > Again into Download mode
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted (CF-ROOT HERE)
Same again when you see S Logo on Phone unplug Cable
Close ODIN
What I do now is go into
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Enable USB Debugging > Plug in Phone copy over your ROM
Reboot into Recovery (Vol UP - Menu - Power)
Wipe the 4 things (probably know these... you should do)
Install ROM from Zip Card
Reboot Phone when complete... DONE!
Hope this helps you or SEE HERE COMPLETE WALKTHROUGH

I want Revert to stock rom
EwOkie said:
When you have all the files needed in ODIN, say JVU Rom click Start let it Run
Once complete you will see S logo on phone
Unplug Phone > Let it power up then Power Off > Again into Download mode
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted (CF-ROOT HERE)
Same again when you see S Logo on Phone unplug Cable
Close ODIN
What I do now is go into
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Enable USB Debugging > Plug in Phone copy over your ROM
Reboot into Recovery (Vol UP - Menu - Power)
Wipe the 4 things (probably know these... you should do)
Install ROM from Zip Card
Reboot Phone when complete... DONE!
Hope this helps you or SEE HERE COMPLETE WALKTHROUGH
Click to expand...
Click to collapse
I understand what u trying to say mate but i want flash it with stock am using cm10.1 custom rom aneway i had try to flash it with stock rom that is singal tar file i download from samfirmware after i got some errors now i want to go bck to stock rom plz explain me how to i revert bck on 2.3.6 gingerbread rom ?

So you want stock 2.3.6 GB Rom am I right?
If so then do the following HERE except the Root if you wish
If you want to upgrade to a later firmware (For example JW6 - If it has only one .tar file),
Go to Download Mode again select the file under PDA.
DO NOT select the PIT, BOOTLOADER, PHONE, CSC files.
DO NOT check 'Re-Partition'.
Press the START button.
Hope this post helped you

I did same as u said but when every things done odin shown its passed but when its reboot its shows s animation n auto reboot again n again . i also wipe data n factory reset but same .
Sent from my GT-I9000 using xda app-developers app

Did you use Re-Partition and the PIT file?

No Not yet i just flash it with singal tar file which i download from samfirmware site .
Sent from my GT-I9000 using xda app-developers app

Rash732 said:
No Not yet i just flash it with singal tar file which i download from samfirmware site .
Sent from my GT-I9000 using xda app-developers app
Click to expand...
Click to collapse
If flashing back to GB Rom from ICS you have to Re-Partition and use PIT File
Please follow the WALKTHROUGH thats why you are getting Reboots

ok thnx mate
actually i was scared if i did anything wrong may my phone go bricked.
Sent from my GT-I9000 using xda app-developers app

No probs let me know how you get on

orite defently i will .
Sent from my GT-I9000 using xda app-developers app

yes i done it i use that three files n pit sucsessfully bck to gb thnx alot .
Sent from my GT-I9000 using xda app-developers app

[HOW TO GUIDE i9000] ★ Flashing Rom with JVU before Custom ROM + EXTRAS ★

I see there is a lot of people who post in here who dont know how to Flash JVU before Custom Rom with ODIN
Either they get the Red wipe error in Recovery or just arent sure on how to use it, hope this helps you...
THE TOPICS HERE ARE GUIDES ON HOW TO FIX OR USE :
RED WIPE DBDATA ERROR
FLASH JVU 2.3.6 BEFORE CUSTOM ROM
MANUALLY INSTALL CWM
FEAMOD RECOVERY INSTALL
FIX INTERNAL STORAGE ON GT-I9000M
FAILED TO MOUNT SD CARD (E: FAILURE IN RED)
COMPUTER NOT CONNECTING TO PHONE VIA USB
UPDATE TO CYANOGENMOD 10.
AND LINKS TO WHAT YOU NEED ......
Click to expand...
Click to collapse
------------------------------------------------------------------------------------------------------------------------------------
Red wipe error is because the problem is with the dbdata!
Install THIS FILE in the PDA section with ODIN and dont touch anything else!
DBDATA.RFS DOWNLOAD : If you need it
Open ODIN
Click the PDA button and choose the dbdata.rfs.tar file you downloaded
Make sure Re-Partition is unchecked
Boot your SGS into DOWNLOAD MODE
To do this : Hold down the Home, Volume Down and the Power button
Connect your device to your computer with the usb cable when in Download Mode
If your device is connected Odin will recognise it
Click Start in Odin and wait
When the process is completed your device will restart
No more dbdata errors!...
------------------------------------------------------------------------------------------------------------------------------------
HOW TO GUIDE : TUTORIAL TO FLASH 2.3.6 JVU + ROOT BEFORE INSTALLING CUSTOM ROM
Samsung USB Drivers : DOWNLOAD MINE or LINK 1 : LINK 2
Needed to recognise Phone to your PC ... duh! :silly:
Reboot Computer once installed for changes to take effect :good:
Please do not attempt anything if you don’t know completely what it is.
If any damage occurs to you or your device, I will not be held liable ... you have been warned !!
If you arent sure ... just ask
FLASHING JVU ROM WITH ODIN v1.85
Why ODIN v1.85? ... I have not had any issues with it, plain and simple!
Use ODIN with PIT File
PIT File Incase you need it : DOWNLOAD
*Using PIT File just Tick Re-Partition and put PIT File in PIT ..simple!
ODIN 1.85
ODIN FILES HERE
Turn off your phone and put it in download mode by holding VOL DOWN+MENU+POWER
Do you get the Yellow Triangle?..If so continue..if not do it again...
VIDEO LINK : HOW TO GET INTO RECOVERY / DOWNLOAD MODE
Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
*PIT File isnt always needed to do this only if you get the 3 Red errors*
Plug in Phone with USB Cable To Computer
In ID:COM it should go yellow and you should see ADDED in the message box
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file.
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar
When you have all the files needed in ODIN, say JVU Rom as thats what we are using here
Click Start let it Run
Once complete you will see S logo on phone (computer will make a few noises like connect/disconnecting
Unplug the Cable to the Phone
Power Off Phone
Go into Download mode so that we can now root the Phone
Then plug in Phone
Click Reset on ODIN then in PDA put in CF-Root Kernel File for JVU to be Rooted
CF-Root is in ODIN FILES or DOWNLOAD HERE
Then Click START.. should take just a few seconds ....
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same again when you see S Logo on Phone unplug Cable
Close ODIN
Now, what I do now is go into :
Settings > SD Card and Storage > Unmount SD and Wipe that and then at the bottom Wipe Format USB Storage
Enable USB Debugging > Plug in Phone
Window should open up showing your phone Directory..
Copy over your ROM that you want
Shut Down Phone
Reboot into Recovery (Vol UP - Menu - Power)
Wipe the 4 things (probably know these... you should do)
Data / Factory Reset
Cache Partition
Go to Advanced > OK
Dalvik Cache
Battery Stats
Go Back > OK
To move Up or Down > Use the Left Side Volume Rocker Switches with Menu to OK Action
Install your Custom ROM from Zip Card that you want...
Reboot Phone when complete... DONE!
Please Check APN Settings.. for your area after you have done the following steps to give better signal
Sometimes Authentication Type is set to Default..try it at PAP and then Reboot Phone
As some ROMS APN settings are done manually for the user.. so be careful
Rom I am currently using : Blue SAUROM JWB
Hope this helps out a few people as there are quite a few posts opening up with the same problems or issues :good:
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Manually Install CWM (need to have Root in your phone)
Download This FILE and copy it over to /sdcard/
Power off and Boot into Recovery with 3 Button Combo
Select 'apply sdcard:update.zip' and Install (Do not Delete this file from SD Card)
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Deleting Cryption Meta Data Error : CWM6012-CM9-Recovery
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU CANT GET INTO RECOVERY (only if CWM doesnt work)...
Start ODIN
Put your Phone into Download mode and connect it via USB
(Volume Down + Home and then Power)
Download FeaModRecovery : HERE
Choose PDA and use the Downloaded File and put it in there > START
Wait for process to complete....
Exit ODIN..
Start Recovery ....
Install .. Reboot....Done
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU STILL RECIEVE THE : E: Failed to mount /sdcard
Try This :
Download This First SDFormatter (Windows)
1. Download "SDFormatter" from the link above
2. Install "SDFormatter"
3. Enable "USB Debugging Mode" from Developer Options in settings.
4. Connect your tablet to PC (USB).
5. Then, tap the "USB Strage Mode" to connect to PC.
6. Backup data on INTERNAL_SD card.
7. Run "SDFormatter".
8. Specify the drive letter of INTERNAL_SD in SDFormatter and click "(Option)" button.
9. "FORMAT TYPE" select "FULL OVERWRITE" and set "FORMAT SIZE ADJUSMENT" to "ON" and click "OK"
10. Now click "FORMAT" and wait for the procedure to complete. (Can take approximately 1 hour 40 minutes)
11. After format is completed you can recopy the backup files back onto the INTERNAL_SD
..or Try and Format SD card in your Computer
If none of the above works try this : Samsung Format Utility
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
FIX INTERNAL STORAGE ON GT-I9000M (/dev/block/mmcblk0 corrupted) : SEE THIS POST
------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
COMPUTER NOT CONNECTING TO PHONE VIA USB
Windows
Remove all traces of KIES in Add/Remove.. never use KIES anyway...Reboot PC
Unplug any attached USB Devices to PC
Use Latest Samsung USB Drivers HERE and install.. Reboot System when Done
Go to Device Manager and scroll to the Bottom > Universal Serial Bus controllers
Expand all Items >
Now Uninstall one by one all the way down...
Reboot Computer when Done.
Plug in Phone... wait till it recognises Device.
Some people have also tried ...
Going into Download Mode, Connect Phone to USB.
System should install a Driver.. and voila!
Done.
DOWNLOAD THIS AND FOLLOW INSTRUCTIONS IF YOU NEED MORE HELP
Please Hit the Thanks Button if I helped you... :victory:

A.I.O Rescue & Recover : LINK
Android Solutions : LINK
Samsung Updates : HERE
Latest Official I9000 and I9000M Firmwares collection : LINK
Modems : LINK
Perka's File Stash : LINK
Z4ROOT APP : HERE
3 BUTTON COMBO FIX : HERE
SECRET CODES : HERE *Use at your own Risk!*
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Procedure To Update Samsung Galaxy S With Cyanogenmod 10
Device must be running latest Gingerbread 2.3.6 with ROOT to begin .....
Remove KIES completely from Phone and reboot Computer then Install latest Samsung USB Drivers then Reboot Computer...
Ensure that your phone battery is at least 85 percent charged
Cyanogenmod 10 Download
Download Google Apps (Optional)
Connect your device to PC by using the cable.
Enable mass storage mode on it.
Now transfer / copy all the 2 files to your device’s internal SD card.
Ensure that you are not keeping it in deep directory.
Now disconnect the phone from computer.
You then need to enter into recovery mode.
To do so, switch off the device completely, press & hold Volume Up button + Home Button + Power key until recovery mode appears.
After entering into recovery mode, select “install zip from sdcard” & then “choose zip from sdcard“.
Navigate to the ROM file (which you’ve transferred earlier)
Select it & press on ‘Yes‘ to continue. ROM installation process will start.
Wait for the ROM to get installed.
After ROM gets successfully installed, your phone will land in the recovery mode again.
Now select wipe data/factory reset & wipe cache partition to wipe all the data & caches from the phone memory.
The same procedure you have to do for installation Google Apps. (Just don’t do the above step i.e, don’t wipe the data after installations of Gapps).
After installaing both things, now press back button to land in recovery mode.
Select reboot system now from the Recovery mode to Restart the phone.
Usually first boot of the phone takes some time after flashing of new ROM so be patient....
Done!
Issues if you have any :
LOW STORAGE NOTIFICATION : HERE or See this LINK
If the above doesnt help TRY THIS APP
NO MOBILE DATA :
Toggle Flight mode ON/OFF
IMEI Issue :
Flash a stock version of Android for your device: GB 2.3.6 (JVU, or other) that will restore your IMEI
Then you can backup the /EFS folder.
NO 3G AVAILABLE :
The CSC you used is most likely not intended for your area.
This means that the broadband provider settings are not included and
need to be configured manually.
Go to : Settings->Wireless and Networks->Mobile Networks->Access Point Names, press the settings-button and select "New APN"

Galaxy S i9000 / 9001 Disassembly & Assembly
Will add more links when I can ...

Fantastic...
After struggling like an armless lumberjack for what seems like a millenium - I can now relax
Major thanx are flying your way for this epic tutorial

Snowhiter said:
Fantastic...
After struggling like an armless lumberjack for what seems like a millenium - I can now relax
Major thanx are flying your way for this epic tutorial
Click to expand...
Click to collapse
Your most welcome!

Will add more when i get the time...:fingers-crossed:

Added more useful Links.. should be everything you need

HI,
thank you for this huge How to!
I have big trouble to update my Device.
It is not possible to get in the download mode. I tried SDFormatter, it crashes every time i connect SI, Samsungs Ex. HDD Formater runs but no effects on the Phone. Odin cant flash anything (maybe of course of download modus).
What do you recommend?
Sys:
WIN XP Pro SP3, Samsung Driver, Kies
Samsung SI, Android 2.3, Vodafone (Germany) Branding, No Simlock, SIM insert (E-Puls, Provider), No Ex SD Card, original Samsung USB-Cable

What are you trying to update to?
Using the Format tool try with USB Debugging ON
>
Uninstall Kies and reboot machine
Use my HOW TO Files ...
Install Samsung USB Drivers to install then reboot computer again..
Open ODIN and Check Re-Partition and put in PIT File
Make sure all 3 are ticked...
Also put in PDA / Modem / CSC press start when phone is connected via Download MODE
Press start....
Then just follow the rest to Root it...
Let me know if this helps
If you are wanting to go to CM 10 or JB Kies is no use anyway...no one uses KIES anymore

Thanks a lot. I pressed volume +... That was my fault.
Now runs CM 10.1 Nighlty with Helly Bean!

Tnak you
Finished moving GT-i9000 to CM-10 after using your steps.
Thank you.
Just have to solve camera app problem now

grA$ said:
Finished moving GT-i9000 to CM-10 after using your steps.
Thank you.
Just have to solve camera app problem now
Click to expand...
Click to collapse
Glad it helped

** Updated :victory:

New links added ... should cover everything!
This should be more than enough for anyone with problems with there S i9000 Phones

Re: [HOW TO GUIDE] ★ Flashing Rom with JVU before Custom ROM + EXTRAS ★
Thanks for the amazingly helpful thread. I had spent amazing amounts of time looking for a JVU bootloader an could not find it. Now i don't need to as your GB odin files fulfilled all my needs.
Now to test out whether your section on drivers will solve my issues of connecting post GB ROMd phone to my computer.
Sent from my GT-I9000 using xda app-developers app

Your welcome, if you dont need Kies in your computer get rid of it ....
Reboot computer afterwards then Install the Samsung USB Drivers and reboot PC again to take affect....
If Phone doesnt recognise follow the Tutorial on the link if USB not Recognised

Random thought .......Life is so good!
High WAF Wireless Inductive Charging Mod Step by Step Guide

Ok i am a little confused with your guide so decided to ask a few questions
i have read your guide down to after odin and this is where i got stuck
i downloaded odin and the odin.tar file on the page what confused me was this - Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
i could not find the underlined files for these. also this confused me too
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file. (make sure its on or off?)
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar (i only have the odin tar in post)
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar (there wasnt anything there when i clicked it)
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar (there wasnt anything there when i clicked it)
any help would be nice before i continue

mazoshi said:
I downloaded odin and the odin.tar file on the page what confused me was this - Open ODIN and select 512 .PIT, and put in your files for : CSC, PDA, MODEM
i could not find the underlined files for these. also this confused me too
Check Re-Partition option and then Cleck PIT button to select: s1_odin_20100xxx.pit file. (make sure its on or off?)
Click PDA button and select : CODE_I9000XXJVU_CL851880_REV03_user_low_ship.tar (i only have the odin tar in post)
Click PHONE button and select: MODEM_I9000XXJVU_REV_00_CL1092175.tar (there wasnt anything there when i clicked it)
Click CSC button and select: GT-I9000-CSC-MULTI-OXAJVU.tar (there wasnt anything there when i clicked it)
any help would be nice before i continue
Click to expand...
Click to collapse
Re-Partition > ON
If you downloaded the ODIN Files all these are included in the files PDA / MODEM / CSC
HERE
What Rom are you coming from etc...

im useing what was on the phone and my phone is upto date so not sure