Related
Hello,
I was interested in getting Hamachi to work on my newly-acquired G1. After applying Cyanogen's Mod and rooting the thing, installing Debian (yay!) and setting up all the nifty scripts to make it semi-permanent, I focused on getting Hamachi to work.
First I tried the Linux tgz but it failed ("wrong architecture, teabag!" it told me.) ..so I looked around some more, and came across a build for the Nokia N770 (Maemo something-or-other) and decided to give it a try, and holy **** if it didn't work (after some tweaking.)
NOTE: YMMV.
Make sure your phone is r00ted. Can't do it without the r00ty-juice. Also, a Debian distro is required. See here for how: http://www.saurik.com/id/10
**EDIT** I just reflashed my G1, so I had the opportunity to try again and figure out the exact steps! Here they are, as they worked for me:
01) Download the N770 Hamachi tarball: http://files.hamachi.cc/linux/nokia-770/hamachi-0.9.9.9-20-lnx-n770.tar.gz .
02) Untar/ungzip it, it will extract to hamachi-n770-0.9.9.9-20.
03) cd into there, and run sh ./install.
04) mkdir /dev/net to create the node directory in /dev.
05) mknod /dev/net/tun c 10 200 to create the tunnel device.
06) apt-get install sudo if you don't already have it.
07) apt-get install libcrypto++7 if you don't already have it.
08) ln -s /usr/lib/libcrypto.so.0.9.8 /usr/lib/libcrypto.so.0.9.7
09) sudo tuncfg to get the tunnel driver started.
10) hamachi-init to set up the initial configuration and RSA keys.
11) hamachi start to start up Hamachi.
12) hamachi login to login to the Hamachi network.
13) hamachi set-nick nickname if desired.
14) hamachi join network password if desired.
Success!! Got my G1 online and logged into my Hamachi network! I did apply this Linux fix (to make it stay online within my Hamachi2 network -- this is Hamachi 0.9.9):
echo KeepAlive 10 >/root/.hamachi/config
Maybe overkill, as it's gonna send a ping every 10 seconds over the air, which I'm sure will eat up my battery after a while.
--Weasel5i2
nice! been waiting for something like this for quite some time ;D having some problems though... it won't compile... when i run make install, just keeps on giving me a "Nothing to do for target "install"" Tried removing tuncfg folder and hamachi executable too (which doesn't work btw, says libcrypto is missing), still didn't work... any ideas?
Oh, thanks for reminding me! I also did an apt-get install libcrypto++7 when it gave a linker error.
As far as Make goes, it doesn't really compile (it is precompiled) as much as just copy the binaries to the proper places in the path.. Try doing the install of libcrypto++7 and see if it works for you.
--W5i2
alright... so ive tried installing libcypto 0.9.8 and renamed it to 09.9.7.... however it still says i need to run hamachi-init which doesn"t work!
Edit: alright, got it... i had to do sh install
Thanks, seems to work!
tip: the libcrypto.so.0.9.8 wich you have to rename to libcrypto.so.0.9.7 is located in /usr/lib
Can any of you two (Fish & Zero) whom have gotten this to work confirm what you did, and if "Debian" is needed ?
TheUriel said:
Can any of you two (Fish & Zero) whom have gotten this to work confirm what you did, and if "Debian" is needed ?
Click to expand...
Click to collapse
it does work, it only works on debian at the moment, since the binaries are not designed for android. however, the network connection should work with android too, since debian and android share their connections...
all you need to do is follow the instructions, but also run
apt-get install libcrypto0.9.8 and
mv /usr/lib/libcrypto0.9.8.so /usr/lib/libcrypto0.9.7.so (something like that check ls /usr/lib)
Alright so im still breaking my neck to get this to work but i dont get it.
This guy says "4) Untar/ungzip the file, run 'make install' and it should install without errors/warnings, IIRC.. (I did this last night)". What is he talking about ? Do i download the zip file, extract the folder in it to the root of my SD ? because thats what i have done so far. And if yes after then what comes next ? I cant put his puzzle together. -.- So lost, and i really want this.
You need a working debian on your android for this to work.
and even then its helluva lot of doing magic until it so much as tells you that it's started.
My Problem for example is that when i do: "hamachi start" it tells me that it can'T access the tun device (no such device) but it's there...
Dont worry about it, i went back to Hero after getting Debian working.
Updated PP
I reflashed my phone, so I had a chance to install Hamachi and document it again. As such, I updated the parent post with the correct instructions.
Enjoy, and please let me know if anything doesn't work and I'll happily try and help with troubleshooting.
--W5i2
Hmm almost eberything works except 'hamachi start' wich throws bad response from tuncfg (/dev/net/tun no such device)
Prolly a problem with my debian installation but you got an idea without reinstalling the whole thing?
You need to make the tun device first:
# mkdir /dev/net
# mknod /dev/net/tun c 10 200
I have since rewritten the original post to have more detailed (and proper) instructions.
^_^
-W-
Tried that after it was posted here in a reply (i think)
But to no avail (tried sudo tuncfg too but nothing changed)
Can't wait to go try this.
Does anyone have any VNC viewers (preferably free) that they recommend for use with this? My computer is behind a NAT router so I need to use Hamachi to access it.
Spica
Hi all,
Am I able to install this Debian into my rooted Eclair 2.1 Samsung Spica?
Thanks in advance.
SadaT5700 said:
Hi all,
Am I able to install this Debian into my rooted Eclair 2.1 Samsung Spica?
Thanks in advance.
Click to expand...
Click to collapse
Or my Evo 4G?
I have ubuntu running on my Evo 4G per the instructions here: http://forum.xda-developers.com/showthread.php?t=720622
I've followed the hamachi install instructions in this thread, but when I try running "hamachi start" I receive the following:
07 04:33:56.732 [ 0] [6315] tap: connect() failed 111 (connection refused)
Does anyone out there have any idea on how to fix this and get hamachi running?
This would be AMAZING on the Evo. Just imagine the possibilities of remote administration.
I have it working however I can only mount linux shares I cant mount windows drives
and what sucks is the ubuntu image wont let you paste files to filesystem ,root, home, or anywere. only from terminal.
I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problems. I've downloaded the sdk and ran the sdk setup.exe and downloaded all the latest files, and of course the usb driver. I was able to successfully install the driver and was able to connect my G1 for file transfer. I've followed the guide info to the letter but for some strange reason I get the following:
Code:
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
I've already tried uninstalling the newest driver and installing the working one from my pc, then I tried downloading a driver that was listed by a user in this thread. Still no luck. Any advice would be greatly appreciated!
SG_Shadow said:
I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problems. I've downloaded the sdk and ran the sdk setup.exe and downloaded all the latest files, and of course the usb driver. I was able to successfully install the driver and was able to connect my G1 for file transfer. I've followed the guide info to the letter but for some strange reason I get the following:
Code:
* daemon not running. starting it now *
* daemon started successfully *
error: device not found
I've already tried uninstalling the newest driver and installing the working one from my pc, then I tried downloading a driver that was listed by a user in this thread. Still no luck. Any advice would be greatly appreciated!
Click to expand...
Click to collapse
plug your phone in
get working drivers
install linux, it works better
I already have my pc setup with adb. It appears to be working just fine. I'm trying to setup adb on my laptop and is running into all types of problem
Click to expand...
Click to collapse
[*]plug your phone in
[*]get working drivers
[*]install linux, it works better
Click to expand...
Click to collapse
u forgot a step.
[*]post in the correct forum
Firerat said:
plug your phone in
get working drivers
install linux, it works better
Click to expand...
Click to collapse
1) Done [Don't insult me!]
2) Tried 3 different drivers. All allowed me to connect my G1 to transfer files, but not ADB.
3) ...shouldn't have to install linux. My pc (running windows abviously) works just fine. My laptop, running windows, should work the same.
Thanks for the assistance though...
Daneshm90 said:
u forgot a step.
[*]post in the correct forum
Click to expand...
Click to collapse
Fail!
SG_Shadow said:
1) Done [Don't insult me!]
2) Tried 3 different drivers. All allowed me to connect my G1 to transfer files, but not ADB.
3) ...shouldn't have to install linux. My pc (running windows abviously) works just fine. My laptop, running windows, should work the same.
Thanks for the assistance though...
Fail!
Click to expand...
Click to collapse
read the adb for dummies thread, post in that thread...........................
and
your welcome.
would you like me to wipe your nose as well?
This IS in the wrong forum.
Moved.
Firerat said:
read the adb for dummies thread, post in that thread...........................
and
your welcome.
would you like me to wipe your nose as well?
Click to expand...
Click to collapse
I really wouldn't except this behavior from you, but I see we all fall from grace every now and again. I've posted in that thread already, no one can seem to come up with an intelligent response. I followed all the instructions in both adb help threads for proper installation on my laptop. If you don't know the answer to what I'm seeking, I would honestly prefer you not to reply at all. Don't assume I'm the typical xda idiot, assume I'm the most intelligent person you've ever spoke to, then go from there with your next reply.
SG_Shadow said:
I really wouldn't except this behavior from you, but I see we all fall from grace every now and again. I've posted in that thread already, no one can seem to come up with an intelligent response. I followed all the instructions in both adb help threads for proper installation on my laptop. If you don't know the answer to what I'm seeking, I would honestly prefer you not to reply at all. Don't assume I'm the typical xda idiot, assume I'm the most intelligent person you've ever spoke to, then go from there with your next reply.
Click to expand...
Click to collapse
you posted a couple of hours ago, duplicating posts might be considered spam
you didn't really give any useful information in your post(s)
and if I were to assume your were, then this is just some boring role play thing at a job interview or something, as you wouldn't really need anyones help on this.
Everyone, Chill it.
We don't need a flame war.
Check your firewall. Make sure it's not blocking the connection. Also, are you using the same USB cord on both machines?
ivanmmj said:
Everyone, Chill it.
We don't need a flame war.
Check your firewall. Make sure it's not blocking the connection. Also, are you using the same USB cord on both machines?
Click to expand...
Click to collapse
Thank you for trying to "actually" assist me. I am using the exact same usb cable on purpose to rule that out as a reason. I've also recently update both computers to the latest norton antivirus. Like I stated the drivers install on the laptop and I'm able to connect the G1 for file transfers, so I assume the driver is working but when I type in adb device or adb shell in cmd, I get the no device msg. I'm really stumped with this one...
*Update* My norton did remove adb.exe from windows\system32 on both computers, but I was able to restore that file on both. Like I said, my pc works just fine, laptop no good...
And point 3
Install linux ( ubuntu 10.4 )
Just give it 10gb
It will eliminate hardware faults as being the problem
The android developer has a tutorial for 10.4, so it should be easy
( no need for drivers, aparently 10.4 ships with the android udev rule )
the driver for file transfer isnt the same as the driver for adb....so your logic is flawed
seriously tho, use linux...wubi is pretty good now and u only need 4-10gb if u are only using it for android stuff
in my experience, windows, especially where norton is used, randomly breaks adb
The file transfer is done using the standard windows mass storage driver, not an android specific driver. Even if it's the same norton, try disabling it and see what happens. Also, trying removing the driver completely and reinstalling it again. I've had the issue happen also only when in windows and it's always something random.
virtualbox _should_ ( I think ) let you 'see' the Android Phone regardless of the drivers being installed on the Windows host
But, I have not tested that
Did you ever get this to work, I have the same issue?
I'm having the same issue, I'm trying to use ADB with my TF300T from a Windows 7 64 bit system. Always get the error adb error.
I have a couple of questions will this work correctly with a 64bit O.S?
Also the part of the instructions that reference SDCARD are they talking about the directory on my ASUS /sdcard/ or are they talking about the physical card?
Just need to know does it require you to have a sdcard in the ASUS to use adb?
May sound like fundamental questions to a lot of you, however I have combed through these forums as well as others all over the web, and the majority of instructions seem to be lacking the basics.
Thank you,
I have Ubuntu at work should I run ADB through this?
I have Ubuntu at work
It's a bit of a process according to the instructions that I have on the
screen right now to setup ADB through this, is there any gotchas that I should
know about before attempting this?
This is running on a VM on one of my servers. What I'm looking for is any known compatibility issues with versions of ADB and the Asus TF300T running .26
Thanks in advance.
Nordis
PLEASE READ FIRST
This post will have info on the chroot method. To find out info on running Ubuntu natively on the Adam, click this link for post #2 below. Enjoy
chroot Method:
chroot Ubuntu on Adam Beta1...
For now project files for chroot method will be located at this Google Code Project site. Files will be posted shortly, stay tuned.
DO NOT attempt this yet until specified as alpha or beta or otherwise stated as ready for testing!!
Liability:
I'm not responsible for what you do with your device, this is a guide or tutorial for general purposes only.
If you do not have a strong understanding of rooting and how to recover a device from scratch DO NOT attempt this until we are our of beta stages. Wait till you see RC status at least.
Verified working with bugs
Directions:
I'm not sure what file format is needed on the SD card, so make sure it has the stock file format from Android.
Make sure you are rooted using the methods listed here or Notion Ink Hacks Forum.
Download necessary files:
- Main scripts: Download from Google Code Project webpage. http://code.google.com/p/chroot-ubuntu-ni-adam-tablet/
- Ubuntu.img file: Download from MegaUpload. http://www.megaupload.com/?d=3ZQTCUUN
Create a folder on root of your Adam SD card called "ubuntu" and download the files from the Google Code Project site to this folder.
Unzip "ubuntu.img.zip" package and copy or move "ubuntu.img" file to the ubuntu folder you created above. Delete all the rest of the files. Do this to make sure you do not confuse the scripts I've put together for the Adam.
Plug Adam into your computer and make sure you have a connection to it.
Android SDK installed on a local computer with ADB functioning.
Make sure you do not have the SD card mounted on your computer. Also make sure USB Debugging is turned on, which I think you need for ADB.
Change the name of "bootubuntu[x].[x]" to just "bootubuntu"! DO NOT use the original "bootubuntu" file.
If you haven't already open a command prompt and type:
Code:
adb shell
Enter superuser mode:
Code:
su
Change directory to the "ubuntu" folder:
Code:
cd /sdcard/ubuntu
Run the setup script (You should only have to run this once or whenever new updates to the files are released):
Code:
sh ./ubuntu.sh
Once the script finished you should be good to go, type the following to run Ubuntu:
Code:
bootubuntu
If you see something like the following below, job well done!
Code:
[email protected]:/#
Troubleshooting:
If you get any errors, please FIRST, try rebooting Adam and start back at "adb shell" step 7 and try again.
More to come
If you get any errors, please post at what step number you got an error and post as much detailed info as you can about the error. Myself and others will do what we can to help.
Resources:
http://nexusonehacks.net/nexus-one-hacks/how-to-install-ubuntu-on-your-nexus-oneandroid/
http://tegradeveloper.nvidia.com/tegra/forum/workaround-run-ubuntu-now
Native Ubuntu Method:
More to come, holding this place for future use...
No problem for testing it ... but not before the end of next week
My Adam will be send on 31st of January
There is nothing to test yet. Not until more research is done and files gathered. Not to mention we still need full root and unlock first.
Do not attempt to run the files in that link.
Sent from my Evo
For Rooting Adam it seems that it's done ?
And Don't worry i will not try to use fill that wasn't for Adam.
If you need help ... to search, test ... I will be part of ;o)
Thanks Gkar! Just be sure to follow this thread as any updates will appear here.
Also, root methods have been started but there are bugs. We need Adam users to help with that process first before helping here. Once that process works consistently I plan to get started on this.
Sent from my Evo
Pfffff ... I've just seen on pre-order page that my date has been pulled to 14th feb 2011 and then i will have to wait to test !!
Ubuntu netbook edition
Btw, I am sure you have seen this, but Ubuntu does have a Netbook Edition. It brings all the advantages of Ubuntu to a netbook – using Unity, an innovative user interface super-optimised for smaller screens and also convenient for touch screens.
So, this may be the best version to port to Adam if we can get it going. I unfortunately have no development knowledge to know if it is possible.
Mmmmmh .... i'm using Netbook edition on EEE 901 for my kids but unity isn't mature.
I prefer old version of Netbook edition (10.04 LTS) ... and that's the version used to create Ubuntu Distro for HD2.
Maybe we can ask them for some help.
I'm interested on this too. For the record, I'm keen to get an Adam and wipe Eden, replacing it with Ubuntu. I think Ubuntu 11.04 will be an awesome distro to run on a tablet, and currently Notion Ink's Adam is the only one being made that meets the stats I'd like to see.
The current hacks that exist to get Ubuntu running on the Nexus One (have done that) require running a modified server version from the sdcard, the using VNC to run a virtual session. Has it's plusses (running within Android, for instance), but I'm keen to see Ubuntu running natively. Android isn't mature enough to be a main system yet, whilst Ubuntu is. Cheers.
hope a port is cooming soon
Yeah, I'm very eager to try this too
Maybe a dual boot with Android ?
Looking forward to it
Thanks for your patience everyone. I've been swamped. This weekend I plan to hunt down some files, look at the scripts, and hopefully we can start trying this shortly!
This is one of the main reasons I have been waiting for the Adam for so long. Hopefully we can dual boot Ubuntu as that is what I would prefer, but if not, oh well. I want to have a tablet that acts more like a computer then a glorified smartphone without phone capabilities... Can't wait to see the development of this!
TreTuna said:
This is one of the main reasons I have been waiting for the Adam for so long. Hopefully we can dual boot Ubuntu as that is what I would prefer, but if not, oh well. I want to have a tablet that acts more like a computer then a glorified smartphone without phone capabilities... Can't wait to see the development of this!
Click to expand...
Click to collapse
Dual booting is always preferred yes, but that is not what my method will do. This method will be a bootloader running on top of Android. For many reasons this will be easiest for now.
I'm very excited about this, can't wait to have my Adam and following the developent of ubuntu.
I really think, on another hand, that Android and Ubuntu are majors players in the open-source OS and should therefore communicate better.
I want Adam to be the best friend of my Ubuntu desktop. There are so many possible ways to make these OS interact, at least the way iOS talk to Mac OS X.
i can't wait for my Adam to be here to write apps in this direction!
I love that idea as well. Would be cool if there was a way to integrate Ubuntu netbook edition and Android.
Sent from my PC36100 using XDA App
Ubuntu netbook edition and the desktop version are now the same thing with the upcoming release. Actually, the whole UI of Ubuntu is getting a major overhaul to be touch centric. Currently, my nexus one running cyanogenmod DOES talk to my Ubuntu netbook. And server. Very well in fact. Tomdroid for notes reads all off my desktop tomboy notes, and Funambol, with syncevolution syncs my calendar and address book.
Have just ordered an Adam with a friend, and plan to hack it extensively until Ubuntu is running in full, natively, as it's primary operating system. Android is useful, but doesn't have the functionality of Ubuntu. Would be useful having android as a secondary system, or within Ubuntu, but I won't hold my breathe.
I agree though, the first step seems to be getting Ubuntu running within android. I'm starting to research how the bootloader needs to be hacked to recognise a usb or dvd drive to boot from, and how it would "see" ubuntu installed on one of the internal drives. Will post back with more info soon, even though this is further down the track.
tillum said:
Ubuntu netbook edition and the desktop version are now the same thing with the upcoming release. Actually, the whole UI of Ubuntu is getting a major overhaul to be touch centric. Currently, my nexus one running cyanogenmod DOES talk to my Ubuntu netbook. And server. Very well in fact. Tomdroid for notes reads all off my desktop tomboy notes, and Funambol, with syncevolution syncs my calendar and address book.
Have just ordered an Adam with a friend, and plan to hack it extensively until Ubuntu is running in full, natively, as it's primary operating system. Android is useful, but doesn't have the functionality of Ubuntu. Would be useful having android as a secondary system, or within Ubuntu, but I won't hold my breathe.
I agree though, the first step seems to be getting Ubuntu running within android. I'm starting to research how the bootloader needs to be hacked to recognise a usb or dvd drive to boot from, and how it would "see" ubuntu installed on one of the internal drives. Will post back with more info soon, even though this is further down the track.
Click to expand...
Click to collapse
I ordered my Adam Once I saw it figure in XDA forum. My experience with XDA especially with SGS phone has been immensely satisfying. The way Things are going I am sure Adam will be an object of envy before long.
First off this is completely from Rennat over at PreCentral
-------------------------------------------------------------------------------------
TUTORIAL: How to get the UbuntuChroot up and running for your HP TouchPad
Intro:
UbuntuChroot is the raw Ubuntu terminal without the familiar GNOME graphical interface that all have come to think of Ubuntu. With this installed, you will be able to install ubuntu programs and launch them with in the terminal card.
To do this, the basic rundown will be making a new WebOS Doctor that has a separete partition of memory for Ubuntu to run with in. Then we will install it on your TouchPad and mount that partition so it will be able to be used after a reboot of the device. Lastly, we will install Xecutah, XServer, and UbuntuChroot from Preware and boot up Ubuntu on your TouchPad.
Both credit and Props go to WebOS Internals for making this possible and putting in all the hard work they have to make it as easy as it is.
Warnings:
I nor WebOS Internals take no responsibility over what may happen to your device. If you follow these instructions it 'should' work perfectly. If you do endup messing something up you 'should' be able to just doctor the device using the stock WebOS Doctor from HP.
Step Zero:
- I have provided 2 different ways to set your device up to install the UbuntuChroot onto your device; use the meta-doctor and create your own doctor (Step 1-A) or do as Step 1-B says and contact my army of monkeys for an easier alternitive that won't take forever.
##You my want to backup app data and the like using Save/Restore in Preware as you will lose all your data buy installing a WebOS Doctor. Please do so! And done hesitate to ask questions.
Step 1-A: Creating a WebOS Doctor
- We will be using the Meta Doctor to create a special WebOS Doctor that will create a 2GB (or more if you wish to do so) partition in /media/ext3fs/ were Ubuntu will be.
- Use the WebOS Internals Guide to installing and running the Meta Doctor. In Step 2 you will have to rename you downloaded webOS doctor to the name of the Bell Mobility doctor they have under Step 2'3 (webosdoctorp100ewwbellmo.jar) go ahead and add the webOS version after it like it advises.
- In Step 2'6, if you are using a Wifi Only TouchPad you will be using the last one which has touchpad for device and WiFi all for the carrier.
- Once the Meta Doctor is done, run the Web's Doctor it created under the 'builds' folder. And setup your device.
Step 1-B: Contacting My Army of Monkeys
- If you are having trouble with or are intimidated by Step 1-A go ahead and contact my army of monkeys at [email protected]. Simple.
Step 2: Mounting the new ext3fc partition on bootup
- Now before we continue we have to make sure we have the partition fully setup and mounted on bootup. To do this follow the below WebOS Internals instructions.
All of this is done on device either via novaterm or an SSH login. (simpler terms mean use WebOS Quick install by connecting you device, opening WebOSQuickInstall, and click Tools-Command Line.) If your device does NOT have a folder at /media/ext3fs then you will need to create it first. Use the following two commands:
Code:
mount -o remount,rw /
mkdir -p /media/ext3fs
it is important that you use /media/ext3fs as the location, otherwise some homebrew applications (such as Optware and the Ubuntu 11.04 Chroot) will not be able to find it and use it properly.
After you have created the mountpoint, we are going to edit the fstab file to set it up to mount at bootup.
Code:
mount -o remount,rw /
echo "/dev/mapper/store-ext3fs /media/ext3fs ext3 noatime,data=writeback 0 0" >> /etc/fstab
Now to get it mounted you have several options, the best one is the first command as it will use the data in /etc/fstab. If that works, then you have done this correctly and your ext3fs will mount at bootup.
Code:
mount -a
If you do not want it mounted at bootup, but you do need it mounted, you can use this command.
Code:
mount /dev/mapper/store-ext3fs /media/ext3fs
Click to expand...
Click to collapse
Step 3: Adding Testing Feeds
- Follow these WebOS Internals Instructions to add the Testing Feeds.
NOTE: These are edited slightly and will only work on a Wifi only TouchPad.
- Open Preware and wait for it to finish loading.
- Open the App Menu (tap "Preware" in the top left corner of the screen) and tap Manage feeds.
- Scroll to the bottom until you see the New Feed box.
- Type or paste a name (webos-testing-armv7) and URL (Right Click - Copy Address) sure the URL does *not* have a slash at the end.
- Make sure the IS COMPRESSED option is set to YES.
- Tap Add Feed and then tap Yes when the alert pops up.
- Gesture swipe back. Preware will alert you that you have added feeds and ask if you want to update them now. Choose YES.
Click to expand...
Click to collapse
Step 4: Installing UbuntuChroot, Xecutah, and XServer
- Open up Preware and tap List Of Everything.
- Search for and install the following: UbuntuChroot, Xecutah, and XServer
- Now opened Xecutah and tap XServer and a new card will come up.
- Go back to Xecutah and tap UbuntuChroot. Then swipe back to the new card that came up.
- Now you should have the Ubuntu terminal. Done. It should have a few 'mount' commands and then the @Touchpad:
Step 5: Installing Programs
- Now to have some fun after all that work you put in!
- Type the below and it will update the program lists.
Code:
apt-get update
- Now type the following to install what ever you wish!
Code:
/***type the below for AbiWord
apt-get install abiword
/***type the below for the Chromium Browser
apt-get install chromium-browser
/***type the below for GIMP
apt-get install gimp
/***type the below for Eclipse
apt-get install eclipse
/**type the below for LibreOffice
apt-get install LibreOffice
/***type the below for LXDE (a windows graphical interface) and then launch it by typing lxsession.
apt-get install lxde
---------------------------------------------------------------------------------------
agian from precentral enjoy guys
Mods please move to there thread i was in a rush (dead battery) and put it in the wrong forum
Does anything else besides chromium, abiword, eclipse, libreoffice, lxde and gimp work?
linkinpark4175 said:
Does anything else besides chromium, abiword, eclipse, libreoffice, lxde and gimp work?
Click to expand...
Click to collapse
anything you can compile for ARM or want to compile for ARM. there is a apt repository.
You could also find a complete guide to install Ubuntu Linux on HP TouchPad here
same thing
XDAnoobr said:
You could also find a complete guide to install Ubuntu Linux on HP TouchPad here
Click to expand...
Click to collapse
agian that is only for Chroot which is the exact same thing
Works great, now I have lxde on my touchpad.
able to get ubuntu chroot working properly, with libreoffice
now, hunting for a Bluetooth Keyboard
any one going to test if BT Mouses work? (yeah, i know theres a touchscreen)
Is multi-touch supported on this?
what version of libreoffice does it install the latest one? And if anyone has installed it the ubuntu laggy or is it normal.
harsh3090416 said:
what version of libreoffice does it install the latest one? And if anyone has installed it the ubuntu laggy or is it normal.
Click to expand...
Click to collapse
a little laggy sometimes, but still usable most of the time without any problems
libreoffice 3.3.2... you should probably check the ubuntu ARM 11.04 repository to see what is there
top says 1gb ram, 0.90gb used.... not sure why......
EDIT: Tried pairing a BT Mouse... able to find the device via "BT->Search other", but unable to pair properly. Mouse said paired successful, but touchpad couldnt continue, kept searching for devices
Tried "BT->Search Keyboard", but couldnt find the mouse this way
Now they have Debian chroot. Works great as well. Both can coexist at once. All it is is a folder at /media/extfs
Btw, has anyone gotten gnome working? I keep getting segmentation faults.
Is there a way to make that partition without meta doctor?
DJGonzo said:
Is there a way to make that partition without meta doctor?
Click to expand...
Click to collapse
metadoctor makes a partition
you could loop a filesystem ontop of the existing partition to avoid this issue, but the page below recommends against it
http://www.webos-internals.org/wiki/Chrooting
mount: mounting /dev/mapper/store-ext3fs on /media/ext3fs failed: No such file o
r directory
Why am i getting this error when trying to mount? It's really ticking me off as I haven't done anything different from the instructions.
I just spent an hour redoing the whole thing and guess what... i'm pissed off
same ****
samvillian said:
mount: mounting /dev/mapper/store-ext3fs on /media/ext3fs failed: No such file o
r directory
Why am i getting this error when trying to mount? It's really ticking me off as I haven't done anything different from the instructions.
I just spent an hour redoing the whole thing and guess what... i'm pissed off
same ****
Click to expand...
Click to collapse
looks like you didn't do metadoctor properly,
or you didn't make the /media/ext3fs directory,
or "mount -o remount,rw" didn't execute properly
1st problem: your touchpad should have around 10GB free(out of 16GB, or do the math if you have a 32/64gb)
2nd problem: go back to cmd prompt and check that /media/ext3fs exists
3rd problem: reinstall via webos doctor and do it again
kevina90 said:
Now they have Debian chroot. Works great as well. Both can coexist at once. All it is is a folder at /media/extfs
Btw, has anyone gotten gnome working? I keep getting segmentation faults.
Click to expand...
Click to collapse
Sorry, this is off topic. I'm sure Android will get here, but I really want to use my Touchpad (I haven't done much because I figured everything would get wiped anyway this weekend), so I think I'm going to give Linux a go. My understanding of Linux is rather crap. I thought Linux was the OS, and Ubuntu and other things were just GUIs to make it easier for people unfamiliar with command line. How could Debian simultaneously coexist?
I know I could go to wikipedia and look around and try to understand it, but by chance does anyone know any website that kinda describes Linux to beginners? I don't just want to follow the directions step by step on the guide (although its brilliant, looks very easy)without having the slightest effin idea what everything is, you know? Its weird, Linux confuses me, I don't know why. I've used ubuntu a number of times but it's just browsing firefox, not exactly rocket science!
Thanks if you can easily give link and press send then thanks but don't go out of your way, I can find something eventually, but I don't want someone else mucking around for my sake. Its no emergency.
Komodo Rogue said:
Sorry, this is off topic. I'm sure Android will get here, but I really want to use my Touchpad (I haven't done much because I figured everything would get wiped anyway this weekend), so I think I'm going to give Linux a go. My understanding of Linux is rather crap. I thought Linux was the OS, and Ubuntu and other things were just GUIs to make it easier for people unfamiliar with command line. How could Debian simultaneously coexist?
I know I could go to wikipedia and look around and try to understand it, but by chance does anyone know any website that kinda describes Linux to beginners? I don't just want to follow the directions step by step on the guide (although its brilliant, looks very easy)without having the slightest effin idea what everything is, you know? Its weird, Linux confuses me, I don't know why. I've used ubuntu a number of times but it's just browsing firefox, not exactly rocket science!
Thanks if you can easily give link and press send then thanks but don't go out of your way, I can find something eventually, but I don't want someone else mucking around for my sake. Its no emergency.
Click to expand...
Click to collapse
I would just find a book on amazon about linux with good reviews made in the past 1-2 years. I would look for one that is distribution neutral.
The reason you can have webos on there and another version of linux is because it's basically installed in another partition (not really, but that's the easiest way I can describe it to you). The actual details of how chroot works are different, but that should relate enough to you to get what it it is.
Linux is the Kernel. Debian, Ubuntu, Fedora and the rest are distributions of that kernel along with a GUI, and programs to make it a fully functional OS like Windows or OS X.
The Debian and Ubuntu on WebOS is minimal pared down distribution with no gui.
I just went thru all the steps , contacting the army of monkeys, and installed all the preware stuff.
I get Service Error Unable to run command : /sbin/initctl start org.webinternals.debian-squeeze etc etc
Unknown job org.webosinternals.debian-squeeze-chroot.
I got this with the Ubuntu chroot too. any ideas?
paperWastage said:
looks like you didn't do metadoctor properly,
or you didn't make the /media/ext3fs directory,
or "mount -o remount,rw" didn't execute properly
1st problem: your touchpad should have around 10GB free(out of 16GB, or do the math if you have a 32/64gb)
2nd problem: go back to cmd prompt and check that /media/ext3fs exists
3rd problem: reinstall via webos doctor and do it again
Click to expand...
Click to collapse
I've redone webos doctor like 4 times already.
How do I check if the directory exists? Plus i'm on a fresh 32gb, so its not that.
thanks
edit: i tested to see if the directories existed and i found a possible error.
i just cd to the folder to see if it exists, and media/ext3fs existed.
but the /dev/mapper/store-ext3fs doesn't exist apparently...
would that be the issue?
Since we got a x86 cpu i want to use ubuntu on it, as im from germany i still dont have my I but has anybody tried linux on android?
Adam Outler mentioned something that this would not work...
Btw can somebody tell me what the kernel version is..?
Sorry mods for (possibly) posting in the wrong section :/
//Robert
Sent from my LG-P500 using xda premium
Robbilie said:
Since we got a x86 cpu i want to use ubuntu on it, as im from germany i still dont have my I but has anybody tried linux on android?
Adam Outler mentioned something that this would not work...
Btw can somebody tell me what the kernel version is..?
Sorry mods for (possibly) posting in the wrong section :/
//Robert
Sent from my LG-P500 using xda premium
Click to expand...
Click to collapse
Kernel version is 3.0.8.
If you can install linux distros on the backend of rooted ARM devices it should make sense we could do the same....maybe
Ubuntu on a RAZR I ? Linux x86 apps + windows apps with wine without even recompile? I think this devece needs some love. It can be the next HTC HD2 for shure.
I dont understand the htc comparison
But i have your ideas about no need to recompile and wine in mind too...
But i understand adam because linux for android is compiled for arm achitecture so a usual desktop image would make more sense...
Why is the kernel version so low?!
Sent from my LG-P500 using xda premium
What we need to do
I have a friend with this device, after rooting he reports there is no chroot command from terminal. If so we must:
Compile busybox (with more extensions) for x86 and install it alongside root (or after root)
Make a mountable image from an ubuntu clean install and mount it (probably also needs busybox)
chroot into this mounted image
run a vnc X server on a framebuffer
vnc from android
This is how it is done on other android devices, will attempt to compile and try these instructions out this weekend when I meet him but booting native ubuntu is a much better idea (even better if we can make it receive calls ).
And for what Windows on 4,3 inches display? It dont have hdmi.
Odoslané z GT-P7300 cez Tapatalk 2
The micro usb is acting like hdmi with adapter...
Sent from my LG-P500 using xda premium
Go look up the HTC HD2. It can run Windows Phone 7 and Android dual-booted (with Linux from SDCard), and was originally the last, albeit most powerful, Windows Mobile 6 phone ever made.
Even though it is four years old, there is a massive and vibrant dev community behind it, making it reach the front page of XDA forums.
However, even the venerable HD2 is getting old, with 1GHz processor and half a gig of RAM that was top-of-the-line years ago, and people have looked in vain for some kind of successor. Hopefully, the Razr I, with an unlockable bootloader and Intel processor, will be the one. But that remains for us to do.
pablocrossa said:
I have a friend with this device, after rooting he reports there is no chroot command from terminal. If so we must:
Compile busybox (with more extensions) for x86 and install it alongside root (or after root)
Make a mountable image from an ubuntu clean install and mount it (probably also needs busybox)
chroot into this mounted image
run a vnc X server on a framebuffer
vnc from android
This is how it is done on other android devices, will attempt to compile and try these instructions out this weekend when I meet him but booting native ubuntu is a much better idea (even better if we can make it receive calls ).
Click to expand...
Click to collapse
So I tried this out and there is a chroot-compatible busybox after rooting ("busybox chroot" needs to be called as opposed to "chroot" as there is no properly made link), so anyone with this phone can try (using a PC) install Ubuntu without the grub bootloader using manual partitioning on a single ext3 (I am not sure if ICS supports ext4) partition on a microsd, put into your phone, use a root terminal, mount it, mount the adequate dev, dev/pts, proc and sys partitions and chroot right in. You then might want to install a VNC server in Ubuntu to be able to create a VNC X session in a framebuffer and a VNC client on the android side to VNC into localhost (127.0.0.1), but that should work, I didn't have time to try it this weekend If someone gets stuck post and let us see what happens I cannot wait to see if wine can run desktop Spotify with sound, excited a little hehe.
EDIT: So to make this more understandable you must:
Install Ubuntu (using your computer) to a MicroSD, specifying partitions manually and choosing only a single ext3. Right before clicking install there is a button with something along the lines of "Advanced options", disable the install the bootloader (grub) option.
Insert the MicroSD into the phone and open a root terminal
I don't use Android, maybe it automounts in /media/sdcard or /sdcard, if not you will have to find the device and partition name (probably /dev/mmcblk0p1 or /dev/sdb1) and issue "mount /dev/DEVICEPARTITION /media/sdcard"
mount -t proc proc /media/sdcard/proc
mount -o bind /dev/ /media/sdcard/dev/
mount -t devpts devpts /media/sdcard/dev/pts
busybox chroot /media/sdcard /bin/bash
Now a shell from Ubuntu should open. apt-get update && apt-get install vncserver (maybe the DNS settings must be set in /etc/resolv.conf, not yet sure)
vncserver (or start vncserver, something along those lines)
Now from Android install a VNC viewer and vnc into 127.0.0.1 (or localhost)
That should do it, again if you get stuck post here
i had htc hd2, the most amazing phone in the world. I wanna buy the rarz i for the x86 processor in it. But cpu power without community and developers is nothing :|
Sorry for my bad english.
Yesterday we tried something:
We used dd to put an arch linux image on a micro sd card...
Though my laptop wasnt even able to boot from any sd card, this should work on our phone...
but how to make it boot from the sd card? xD
btw you might have noticed, this will make only linux boot, not android, we dont chroot, may somebody build a simple ubuntu img for complete linux installer?
//Robert
so right now i am trying to chroot into an img file, mounting it and then chrooting it but all i get is:
chroot: can't execute '/system/bin/sh': No such file or directory
whats wrong?
Robbilie said:
The micro usb is acting like hdmi with adapter...
Click to expand...
Click to collapse
Razr i MHL capable???
as far as i know, sadly not no
Ok so finally I got Ubuntu Quetzal running with chroot, still some problems (missing randr extension in vnc) but ill get over this
Hey,
great work. :good:
Good to see there are people with the same ideas. I´ve searched a lot for this thread.
I will also try to get this device for the same reasons when it´s cheaper. Has anybody tried to get Plasma Active or Tizen to run?
I think Active should now be possible through kubuntu Active?
Cheers!
Hi all
At first you can try a application from play store called Linux installer
https://play.google.com/store/apps/details?id=com.zpwebsites.linuxonandroid
Otherwise you can wait some weeks for an nexus 7 Ubuntu port witch looks really interesting.
http://forum.xda-developers.com/showthread.php?t=1957561
Ahhh maybe have a look at the andrinux project here at xda
[/COLOR]Here's the andrinux link
http://forum.xda-developers.com/showthread.php?t=1387105
Sent from my sweet little Blackbox
Robbilie said:
Ok so finally I got Ubuntu Quetzal running with chroot, still some problems (missing randr extension in vnc) but ill get over this
Click to expand...
Click to collapse
thanks for your post on preparing an arch image (I don't have permision to post in devel forum, maybe because I'm a newbie ), It worked well for me although I had to adjust some things such as path and pts mount
I now have a gcc toolchain and a latex distrib on my phone I had never used arch, found it very good
I've also tried some window managers ... the one I find best for the moment is enlightenment in the touchscreen mode, awesome works great as well.
I would also suggest to use Hacker's keyboard instead of stock android, it is a complete keyboard, very usefull when dealing with terminals ... as for VNC viewer, one should recompile android-vnc-viewer with the patches given in Issues 238 and 239 (can't post links either), it's a lot better
I've had a lot of fun, thanks
First, Complete Linux Installer doesnt work because its images are compiled for arm not x86 (i tried )
Secondly, I did a tutorial here http://forum.xda-developers.com/showthread.php?t=1966984
the nexus 7 stuff is interesting and we consider making flashable fastboot for the razr i since we dont have cwm or such you know
i am talking to jordan keyes who recently owned a nexus 7 who probably will try out the ubu stuff and i might get some system info
but i would really prefer a dual boot, capable of booting from sd...
I came across this site today:
http://www.pvsm.ru/wine/10369
translated here
I don't know if this could possibly help you any further but I thought that I might as well post it.