Database Develop

Wierd Line showing on the Camera and even on pics :(

I just flashed a at&t Tilt with the original HTC ROM :
RUU_Kaiser_HTC_WWE_1.56.405.5_radio_sign_22.45.88.07_1.27.12.11_Ship
I am seeing a wierd thin orange line (vertical) across the camera screen. This also shows in the pics. Has anyone faced this problem ?

Mine has had this problem for about 2 months now, I have a vertical orange and horizontal gray line messing my pics up.. I guess the only way to fix it is through warranty, tho atm I can't afford to lose my Kaiser for a month.
Funny thing is that the first time it happened, it went away after 2 days, and then came back on in a week, never to go away again
Several radios, roms etc tested, it's an internal problem, since it's not the lens either

i've the same problem... sometimes the lines go away, but I think I'll need to get it repaired....

Just so everyone knows what we're talking about:
(Sorry for breaking the forum structure)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

I get the same issue, always 2 lines - one vertical, one horizontal. Soft reset sometimes fixes the problem, sometimes it doesn't. It comes and goes. Very strange!

System-volum bar goes up and down by itself

Hi,
I have a "little" problem which is very annoying...the volum bar goes up and down by itself, and this happens very often.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(Random picture from google)
Typing a message (or doing anything else on the phone) takes a very long time because it keeps popping up all the time. I upgraded the ROM, but that didn't work either....it seems to use a lot of battery when this happens too Battery can be dead after a day or less...and that's when I haven't even used it at all.
I have no idea why this started to happen...I hadn't done any changes on the phone before that. It doesn't seem to be anything wrong with the volume buttons on the side either so it must be a software problem.
Any tips are greatly appreciated

I believe we have the same issue: http://forum.xda-developers.com/showthread.php?p=4081584#post4081584
This started happening yesterday for me.

yeah we have the same bug :/ atleast it's nice to see that I'm not the only one with this problem...hopefully someone will come up with a solution to fix this problem....It's driving me crazy

This happened to me after the phone got a little wet. It disappeared after a few days tho.

any chance its the auto change volume of the apointments calander
that mute the sound when u are in a meeting ?

Unlock/White & Black Screen Issue

I'm not sure whats wrong with my phone, I have the AT&T Tilt and I ran into a problem with it just last night...
I have no clue as to what caused it but whats happening is there is either a black or white screen on my phone when it is turned on
This is not like a normal black or white screen problem where the whole screen is either white or black, I've found my phone still works as in it recieves calls/texts however I can't pick up or access anything.
There are still the two bars on the top and bottom of the screen (The top bar has the start, signal, wireless manager, and battery icon while the bottom has the unlock option displayed)
I try unlocking and though the screen and buttons still sense it, nothing happens. I can do nothing with the top bar as well
It is still connected to the network, like i said I still recieve texts and calls but i can't do anything about it
Ive tried multiple softs resets, taken out the battery and sim, tried turning on the phone without the sim, and to no avail...
What do you guys think is the problem?
p.s. sorry for the novel i'm just frustrated with this issue an want to give you all as much information about it as possible

Hard-Reset
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}

[HELP]What is this cable for? Possible sudden death fix.

TOO LONG, DIDN'T READ: What is cable for? Where is it leading to? The phone doesn't work at all when I disconnect it. But as I press it, or reconnent when pressing doesn't do the trick, the phone boots and act like it used to.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Backstory:
So I dropped my phone once on the floor, perfectly flat on the screen.
Since then it would randomly shut off, indicating a dead battery (3 red LED signals) and do nothing. I managed to charge it after an entire night and a morning for 3 times, but then it died completely.
I decided to open the phone up, and after a month of playing around with it, I came to 2 defects.
The vibrator motor would constantly buzz, whether the phone was on or off, as long as the battery was charged.
When I pressed the motherboard on a certain place, namely a flat cable connector, suddenly the red light would show up, go back to very dim red, and suddenly the phone booted in "charging-mode".
So my phone was charging, and it worked completely fine, aside from the vibration motor ofcourse, which I disconnected.

[SOLVED] JY3066 always white screen problem

hi i have JY joying 3066 for Toyota corolla 2008.
i time i started the car and the screen was white. i could still hear but could not see anything (full white backlight screen).
i had to go somewhere and had no time to fix it so after driving for about an hour - the screen came back to itself but the system did a hard reboot ( all settings was wiped).
since then all was fine for about 2 month and now it happened again.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
I plugged it in 12V5A power in house for several hours to fix itself but it still stuck on white screen.
to be Clarify- white screen is also on boot logo and on recovery mod
does anyone knows how to fix it?
thanks in advance.

after openning the device by removing one screw at the back and two screws at the sides, then you remove the DVD drive by removing 4 screws.
then 2 screws at each side to remove the screen and you need to disconnect and reconect the big white cable from the board to the screen.
this works for me