hi there!
i´m trying to unlock my htc hd7 t9292 (sim-unlock)
all rom download-link i´ll use are down.
my phone data;
sys version 7.108107.79
bootl. ver. 5.11.2250.0
pd29100 ss-bc (4k)
spl-5.11.2250.0(134578) mng
microp (led) 0x07
Touch s1(v1.8, #1624)
thx in adv
SIM unlock is a pay service
NO ROM can help you, it's a fair price for the unlock, don't be cheap.
FYI it's the cellphone radio(Hardware) and not the OS or the radio version(software) which is locked to a carrier.
Related
I just got my phone upgrade to HTC pure from ATT. I have bought the unlock from http://www.htc-unlocks.com/ ( Olipro ) .Everything went well for unlocking but when I restart the phone it went to dead. After HARD reboot shows as:
Security unlocked
TOPA210 32M
SPL-1.33.01 iMex
MicroP-Topaz (LED) v11
TURBO HW/TURBO SW
TPMFG DATA
512,555 190,897
191,208 833,208
833,899 calibrated
Can Someone here help ?
Thanks!
__________________
You might have to run HardSPL from here (1.83 vs 1.33)... http://forum.xda-developers.com/showthread.php?t=520312 and then rerun Olipro's Unlocker from Step 2.
I'd check with Olipro first to be sure.
Thanks for your suggestion . But my phone is a brick now and can not be synced with PC.
Can you get to tri-clolour screen?
Good evening,
I "half-bricked" my HD7 ...
since it has two updated via zune
by chance, I try the bootloader
miracle and the screen with 3 color bands
and with 4 or 5 lines of writing, but ke I do not have time to read very quickly because there comes a light gray screen with a blue print "enter usb host mode" ...
So here my question what can I do now to install a Rom mango unlocked without re stupidity
Finally, already is that possible??
Thank you very much for your help
as I was comfortable with wp wm as I am lost
titeloo said:
Good evening,
I "half-bricked" my HD7 ...
since it has two updated via zune
by chance, I try the bootloader
miracle and the screen with 3 color bands
and with 4 or 5 lines of writing, but ke I do not have time to read very quickly because there comes a light gray screen with a blue print "enter usb host mode" ...
So here my question what can I do now to install a Rom mango unlocked without re stupidity
Finally, already is that possible??
Thank you very much for your help
as I was comfortable with wp wm as I am lost
Click to expand...
Click to collapse
Whats your current SPL? (Holding down the Volume (-) + Power)
THANK YOU VERY MUTCH FOR YOUR HELP
in the screnn it's write
PD29100 SS-BC (4k)
SPL-5.10.2250.0(132968) mng
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
SD SANDISK 7580MB
Partition Info-v211v413
F400
titeloo said:
THALK YOU VERY MUTCH FOR YOUR HELP
in the screnn it's write
PD29100 SS-BC (4k)
SPL-5.10.2250.0(132968) mng
MicroP(LED) 0x07
TOUCH S1(v1.8,#1624)
SD SANDISK 7580MB
Partition Info-v211v413
F400
Click to expand...
Click to collapse
if you can read all that your phone isn't bricked.
and it isn't half bricked to.
it is just updated to spl 5.10 and you can't use the H/R spl from cotulla on this (so don't try that because then you will get a half bricked phone)
there are some tut's here on xda how to roll back to a lower spl.
here is a link to a tut to roll back:
http://forum.xda-developers.com/showthread.php?t=1371073
really thank you for your help again.
before i do the update it's was only one line written
because i have do a mistake trying install hspl
but after two update via zune, the SPLscreen is like i've written before
now i haven't other solution to downgrade the spl ?
because i just want to install advanced config , and that look very complicate to downgrad spl
( sorry for my bad and english )
Moved to HTC HD7 General
This is a device specific question, not in the development section please.
please refer to the read before posting stcky for guidelines.
Take it easy
O_G
I have in my hands a KAISER 120, stuck in logo and don´t have hard spl maked.
Somebody else brought me that HTC in that state.
that is the info, baterry back
P/N 99HCY196-00
S/N HT844GA02102 T02
Info showed in logo:
R 1.65.29.21
G 25.100.40.08H
D 3.34.00.00
Info in ticolor mode:
KAIS120
SPL-3.34.0000
CPLD-8
Info mtty:
Cmd>info 0
Platform Model ID:KAIS12000
Platform HW Board ID:31, PVT1
Cmd>info 2
HTCSBSTAR301‹§¸BHTCE
Cmd>getdevinfo
GetDevInfo: Get CID OK
HTCSKAIS1200HTCE
Cmd>
Thats the rom version that i need: 3.34.524.0 esn FECHA:09/02/08
Please i need your help to fix that htc Kaiser bricked.
thanks in advance
try with this rom http://shipped-roms.com/download.php?category=windows%20mobile&model=Kaiser&file=RUU_Kaiser_HTC_SPA_3.29.412.0_radio_sign_25.83.40.02_1.65.17.56_Ship.exe
My HD7 stuck at htc logo and I dont know which rom to use.
SCHU100 SS-BC (4K)
SPL-1.20.2250.0(111584)
MicroP(LED) 0x7
TOUCH S1(v1.8,#1624)
SD SANDISK 7580 Class0
Partition Info-v211v413
Under the battery writes pd29100, but in the bootloader is SCHU100. Everythime when I try to flash rom it says "INVALID MODEL ID".
Sorry for my english.
Help?
Can someone help me
same problem
hi dear i am facing same problem . please tell me how you solved this problem
hi_hello0011 said:
hi dear i am facing same problem . please tell me how you solved this problem
Click to expand...
Click to collapse
any one solve this
Hi,
I was searching forums alot but I cant find how to Sim unlock free my phone.
I put some customROMs, so i know how to enter in R/H SPL etc..
HTC HD7 T9292
Soft: win 7.5
OS v: 7.10.879.8
Firmw : NG+ 3.4
Hardw version: 000.2
Radio sv: 5.71.09.02a_22.51.50.21U
RadioH: A.102.0.D4
Bootloader v: 3.1.2250.0(119314)
Chip SOC v: 2.2.5.0
Cheap!!!
there is no "do-it-yourself Free Sim unlock".
Either the carriers unlock the phone for you(the only one free) or you pay for it, very simple.