S.O.S help for unlock HTC PURE - Touch Diamond2, Pure Q&A, Help & Troubleshooting

I just got my phone upgrade to HTC pure from ATT. I have bought the unlock from http://www.htc-unlocks.com/ ( Olipro ) .Everything went well for unlocking but when I restart the phone it went to dead. After HARD reboot shows as:
Security unlocked
TOPA210 32M
SPL-1.33.01 iMex
MicroP-Topaz (LED) v11
TURBO HW/TURBO SW
TPMFG DATA
512,555 190,897
191,208 833,208
833,899 calibrated
Can Someone here help ?
Thanks!
__________________

You might have to run HardSPL from here (1.83 vs 1.33)... http://forum.xda-developers.com/showthread.php?t=520312 and then rerun Olipro's Unlocker from Step 2.
I'd check with Olipro first to be sure.

Thanks for your suggestion . But my phone is a brick now and can not be synced with PC.

Can you get to tri-clolour screen?

Related

CID lock proplem

hello
my device is sioped in bootloader screen its cant logon so its make sync with activesync
i think my devices is CID locked NOW CAN I MAKE cid UNLOCK FROM BOOTLOADER
please help me
thank for all
ok, i cant understand a single thing your saying....
albttar1001 said:
hello
my device is sioped in bootloader screen its cant logon so its make sync with activesync
i think my devices is CID locked NOW CAN I MAKE cid UNLOCK FROM BOOTLOADER
please help me
thank for all
Click to expand...
Click to collapse
Try flashing an official ROM. You really need to give us more information about your phone and what you did to get it "stuck".
--M
albttar1001 said:
hello
my device is sioped in bootloader screen its cant logon so its make sync with activesync
i think my devices is CID locked NOW CAN I MAKE cid UNLOCK FROM BOOTLOADER
please help me
thank for all
Click to expand...
Click to collapse
Do you have a G3 or G4 device?
Did you read the stickies on unlocking your device?
What did you do to make your device get stuck in bootloader?
What is your current IPL/SPL
Who is your carrier?
Why do you want to flash your device and do you truly need to?
If you have not personally unlocked your device then it most probably IS locked. CID lock is not the same as SIM lock.
*IF* your device is a G3 I suggest flashing the button 1.05 rom and then following the steps in the unlocking sticky. *IF* your device is a G4 reflash your carrier's latest rom and then find the G4 unlocker website link in the G4 section of this forum.
1 my device is G3
2 I do unlock 2 time
3 after I install wm6 I suggest flashing the button 1.05 rom then the device is stop in splash screen
4 now my IPL/SPL 1.01
albttar1001 said:
1 my device is G3
2 I do unlock 2 time
3 after I install wm6 I suggest flashing the button 1.05 rom then the device is stop in splash screen
4 now my IPL/SPL 1.01
Click to expand...
Click to collapse
If you went back to 1.05 from a 2.xx ROM you'll need to unlock it again. (if you have already then...) After 1.05 ROM you need to go to a 2.xx (we suggest the TMobile 2.26 production ROM). After you have done the 2.26, you can then flash a custom WM5 or Faria's WM6 ROM. You can only "upgrade" FROM a 2.xx ROM.
--M
mr demontefixo
I install 1.05 then I unlock CID then my device not logon (it stoped in splash screen)
I try install ROM 2.26 but this not repair my proplem
I think solution if i unlocker my CID from bootloader but Inot have method to do that
thanks

ATT tylt unlock problem(a)!

Hey,
Any help would be appriciated...
I've completed all 3 steps to unlock my htc to work with other sims, after completing step 3, the screen went blank and afterwards just scrambled white pixles...
I cant get the sync icon to go green, not to log in to the wm inreface, so i'm kinda jammed.
I CAN reset and goto the 3 color screen, which displays:
Security Unlocked
KAIS1*0 MFG
SPL-1.0.01Pof
CPLD-8
Any ideas?
Which unlocker were you using? Try using KaiserUnlocker found here....http://forum.xda-developers.com/showthread.php?t=375583
Run the app and click Flash Hard-SPL
After this step your phone needs to be on meaning NOT in the Tri-Color screen.
Next run Unlock Radio
Now run Unlocker (again phone needs to be on NOT in Tri-Color screen to work) FOLLOW the steps on phone screen (instructions are also given on above forum)
**Running the Radio Unlocker will change your Radio so it can UNLOCK, after you are done you will need to flash back a new Radio**

Sanity Check - Still CID Unlocked?

So I've upgrade my old 8125 successfully - got a new one due to a second USB port coming off main board. This new one is a slightly newer model - T2. Anywho - Was running Lokiwiz to CID and SIM unlock. Successfulyl Sim unlocked - also THOUGHT i successfully CID unlocked it (based on the progress of the program - all the way through auto hard reset),
but apparantly I didn't (as confirmed by the MTTY tool telling me I don't have sufficient privelages to create image of rom and an invalid Vendor ID error upon tmobile rom RUU). Also i get the familiar "fat format failure" message at the option screen when hard resetting.
So i can flash the heck out of the device with old and new Cingular roms as well as the TouchFlo and Touch Diamond roms but the only thing that changes after successful flashing is the splash screen and depending on the ROM the IPL/SPL number. The device remains frozen and hangs on the Boot Loader screen.
So in attempt to get this thing up and running i need a sanity check.
Mmy first question is
1) Based on info above would you agree the device is still CID unlocked?
2) Is there (cuz I can't find one) a utility besided IMEI unlock to get into the phone and CID unlock it through the RBG boot loader screen?
3) Since I UNSUCCESSFULLY CID unlocked the device using Lokiwiz in the first place - I still have the output file from Lokiwiz - is there a way that the IMEIUNLOCK progrogram from IMEI UK can read this binary file and unlock the device or do i just need to pony up the 40bucks and CID unlock this.
I can't think of another way to get back to a functioning device.
Additional Thoughts
I also had a thought - which is probably an impossibility - but is there any way if I get the IMEI unlock code from Cingular to somehow get it into the IMEI Unlock software or use some other program like MTTY to insert that code into the phone?
DAMN! - I still don't know how the CID unlock didn't go through the first time. -Maye it was because the rom didn't roll back.
BRoke Down
and purchased IMEI unlock - unlocked just fine. Now I was able to upgrade to the Tmobile rom- INstallation went through without a hitch- now I am stuck on the Tmobile Boot loader- WTF can't I get past the boot loader on any rom I use? This makes no sense. Anyone have any thoughts? IPl and SPL at this point both show 2.26. THis is really pissing me off.
Try using the SD method to create a OS ROM dump and restore it. Some people works with it.

How can I confirm my HD is Sec Unlocked?

Hi all,
Being a bit of a fiddler, I fancy using the latest 1.16 Hex Editied Radio, but am not 100% sure that the phone is security Unlocked.
I read that the SPL (Boot Loader?) shows security unlocked, but where exactly is it?
Currently I am looking at my SPL screen and it shows.
BLAC100 32M
SPL-1.56.OliNex
MicroP-BlackStone (LED) v6
Is this the right place to look for it?
Cheers,
Paul.
AFAIK that's where it should show. Unless you have applied for the app to security unlock then it probably is not. HSPL is not the same as security unlocked. If you want to flash the 1.16 radio, you need to go here to get your phone security unlocked.
You must see on the top of tricolor - Security Unlocked
Cheers guys, just as I thought.. But better safe then sorry.
xaoc747 said:
You must see on the top of tricolor - Security Unlocked
Click to expand...
Click to collapse
And to be absolutely specific, the words "Security Unlocked" will be shown with a WHITE background and RED lettering.
ClydeB1 said:
AFAIK that's where it should show. Unless you have applied for the app to security unlock then it probably is not. HSPL is not the same as security unlocked. If you want to flash the 1.16 radio, you need to go here to get your phone security unlocked.
Click to expand...
Click to collapse
Do non branded directly buyed from HTC devices need this security unlocking as well?
I have another question.
Will security unlock means giving up warranty?
mcdull said:
I have another question.
Will security unlock means giving up warranty?
Click to expand...
Click to collapse
yes mate, warranty would be void as the process of performing security unlock first puts HSPL onto your device. Obviously you can always revert back to original SPL if you ever need to afterwards.
Hope this helps
p.s. thread closed as queries answered

I bought "HXC Pro tool" .. how to use it?

Hello everyone ..
I have a HTC HD7,
windows 7.5 phone mango
bootloader version 4.5.2250.0,
5.69.09.29a_22.50.50.21U radio software version
But my phone is in the "half-bricked" like this: http://attachments.xda-developers.com/attachment.php?attachmentid=716637&d=1315757189
I saw a bit of xda http://www.xda-developers.com/ I saw that you can unlock the phone using the method goldcard ..
so I went a little to find on the internet and I found the easiest way to do it ..
basically I found this tool http://hxcdongle.com/ where you can install and unlock the phone .. goldcard I've bought from here http://www.gsmsp.com/products/Unlocking___Flashing_Gears/Made_by_GPGIndustries/HXC_Pro_tool__red__929_19055.html
but I saw this video http://www.youtube.com/user/HTCDongle#p/a/u/1/mx9-ctPy40M
HP saw that the program is written in "full unlock (simlock superCID + + D-OFF)" and "create goldcard" ..
now I do not know if I like the video click where it says "created goldcard"?
please tell me what should I do to my phone?
I HAVE A HTC HD7
windows 7.5 phone mango
bootloader version 4.5.2250.0,
Software Radio 5.69.09.29a_22.50.50.21U
HALF bricked ..
Thanks =)
with goldcard you don't unlock your bootloader... only with jtag it's possible

Categories

Resources