ATT tylt unlock problem(a)! - Tilt, TyTN II, MDA Vario III General

Hey,
Any help would be appriciated...
I've completed all 3 steps to unlock my htc to work with other sims, after completing step 3, the screen went blank and afterwards just scrambled white pixles...
I cant get the sync icon to go green, not to log in to the wm inreface, so i'm kinda jammed.
I CAN reset and goto the 3 color screen, which displays:
Security Unlocked
KAIS1*0 MFG
SPL-1.0.01Pof
CPLD-8
Any ideas?

Which unlocker were you using? Try using KaiserUnlocker found here....http://forum.xda-developers.com/showthread.php?t=375583
Run the app and click Flash Hard-SPL
After this step your phone needs to be on meaning NOT in the Tri-Color screen.
Next run Unlock Radio
Now run Unlocker (again phone needs to be on NOT in Tri-Color screen to work) FOLLOW the steps on phone screen (instructions are also given on above forum)
**Running the Radio Unlocker will change your Radio so it can UNLOCK, after you are done you will need to flash back a new Radio**

Related

Slight Problem with the flashing

I've bought myself a MDA Vario (T-mobile NL).
But i have a other provider so i treid to unlock it which failed.
So i downgraded to IPL:1.01 and SPL:1.01 using the button 1.05 rom.
And then unlocked using lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
I also unlocked the CID and i didn't see any errors in my dos prompt.
Now i am trying to upgrade again and it keeps failing, i get to the green red bleu screen but then it hangs. The phone works but i want newer software.
When i boot it says i have: IPL:1.01 and SPL:1.01.0000 GSM:1.12.10.0 and OS:1.5.4.2.
When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.
I like to upgrade to: T-Mobile 2.26 ROM or http://forum.xda-developers.com/showthread.php?t=330080, i preffer the second rom.
Can someone tell me what is wrong, is it possible the CID unlock failed and it doesn't show?
MSSH said:
I've bought myself a MDA Vario (T-mobile NL).
But i have a other provider so i treid to unlock it which failed.
So i downgraded to IPL:1.01 and SPL:1.01 using the button 1.05 rom.
And then unlocked using lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
I also unlocked the CID and i didn't see any errors in my dos prompt.
Now i am trying to upgrade again and it keeps failing, i get to the green red bleu screen but then it hangs. The phone works but i want newer software.
When i boot it says i have: IPL:1.01 and SPL:1.01.0000 GSM:1.12.10.0 and OS:1.5.4.2.
When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.
I like to upgrade to: T-Mobile 2.26 ROM or http://forum.xda-developers.com/showthread.php?t=330080, i preffer the second rom.
Can someone tell me what is wrong, is it possible the CID unlock failed and it doesn't show?
Click to expand...
Click to collapse
download WST TOOL from the link below and apply to check the unlock staus of your phone,if it says locked again apply the method of unlocking correctly
http://forum.xda-developers.com/showthread.php?t=329170
Error:
'When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.'
I think you did not copied the Enablerapi.cab file in your phone correctly or executed it in there
good luck
Fixed it,
After reinstalling the EnableRapi.cab which got lost in some sort of way. Everything went A ok
MSSH said:
Fixed it,
After reinstalling the EnableRapi.cab which got lost in some sort of way. Everything went A ok
Click to expand...
Click to collapse
GRRRRRRRR8
Glade I was of any help,Happy flashing
Good luck

Sanity Check - Still CID Unlocked?

So I've upgrade my old 8125 successfully - got a new one due to a second USB port coming off main board. This new one is a slightly newer model - T2. Anywho - Was running Lokiwiz to CID and SIM unlock. Successfulyl Sim unlocked - also THOUGHT i successfully CID unlocked it (based on the progress of the program - all the way through auto hard reset),
but apparantly I didn't (as confirmed by the MTTY tool telling me I don't have sufficient privelages to create image of rom and an invalid Vendor ID error upon tmobile rom RUU). Also i get the familiar "fat format failure" message at the option screen when hard resetting.
So i can flash the heck out of the device with old and new Cingular roms as well as the TouchFlo and Touch Diamond roms but the only thing that changes after successful flashing is the splash screen and depending on the ROM the IPL/SPL number. The device remains frozen and hangs on the Boot Loader screen.
So in attempt to get this thing up and running i need a sanity check.
Mmy first question is
1) Based on info above would you agree the device is still CID unlocked?
2) Is there (cuz I can't find one) a utility besided IMEI unlock to get into the phone and CID unlock it through the RBG boot loader screen?
3) Since I UNSUCCESSFULLY CID unlocked the device using Lokiwiz in the first place - I still have the output file from Lokiwiz - is there a way that the IMEIUNLOCK progrogram from IMEI UK can read this binary file and unlock the device or do i just need to pony up the 40bucks and CID unlock this.
I can't think of another way to get back to a functioning device.
Additional Thoughts
I also had a thought - which is probably an impossibility - but is there any way if I get the IMEI unlock code from Cingular to somehow get it into the IMEI Unlock software or use some other program like MTTY to insert that code into the phone?
DAMN! - I still don't know how the CID unlock didn't go through the first time. -Maye it was because the rom didn't roll back.
BRoke Down
and purchased IMEI unlock - unlocked just fine. Now I was able to upgrade to the Tmobile rom- INstallation went through without a hitch- now I am stuck on the Tmobile Boot loader- WTF can't I get past the boot loader on any rom I use? This makes no sense. Anyone have any thoughts? IPl and SPL at this point both show 2.26. THis is really pissing me off.
Try using the SD method to create a OS ROM dump and restore it. Some people works with it.

AT&T Tilt 8925 ( HTC ) SIM LOCK

CAN ANYONE HELP ME WITH THIS?
WHEN I INSERT MY NON AT&T SIM I GET THIS MESSAGE:
SIM LOCK
NETWORK IS LOCKED, PLEASE INPUT UNLOCK CODE.
I'VE TRIED JOCKY SIM UNLOCKER BUT I CAN'T GET IT TO WORK!!!!!!!!!!!!!!!!!!!!
WHAT COULD I BE DOING WRONG??????????????
nutty4u said:
CAN ANYONE HELP ME WITH THIS?
WHEN I INSERT MY NON AT&T SIM I GET THIS MESSAGE:
SIM LOCK
NETWORK IS LOCKED, PLEASE INPUT UNLOCK CODE.
I'VE TRIED JOCKY SIM UNLOCKER BUT I CAN'T GET IT TO WORK!!!!!!!!!!!!!!!!!!!!
WHAT COULD I BE DOING WRONG??????????????
Click to expand...
Click to collapse
You are hardspl'd but that doesn't mean that you are sim unlocked.
Did you follow all these steps from mskip's flashing guide ?
mskip said:
4. SIM and CID-Unlock [OPTIONAL]
For more reading go *HERE*
* YOUR DEVICE MUST BE SYNCHED WITH YOUR COMPUTER BEFORE RUNNING EACH STEP *
*Put your phone into Bootloader and update to a 6.1 Rom first if you get a black screen after Flashing the Patched Radio*
*If the program wont run u may need to install Microsoft .NET 2.0 on your computer to get it working*
1. Make a note of your current Radio in case you need to flash it back
2. Run KaiserUnlocker.exe, follow the instructions
(if you already have HardSPL on your phone you can skip straight to Step2)
3. After patched Radio has been flashed phone will restart and sync with the computer
4. On the Unlocker Program it should say Radio Patched at the bottom
5. Click on Step3 (Run Unlocker). This will bring up the Unlocker screen on your phone
6. If you want to check the status of your Sim Lock or CID Lock click the appropriate buttons
7. Click on Remove Sim Lock and Set CID, then click "Commit Changes"
Click to expand...
Click to collapse
Must i leave the foreign sim inside the phone will i complete this process?
ERRoR Connection
everytime i run the unocker i get the connection error! What's wrong? I tried changing the radio but still an error.
Sim lock help
It finally worked! Thanks To Denco 7 help! You Rock!!!!!!!!!!!!

S.O.S help for unlock HTC PURE

I just got my phone upgrade to HTC pure from ATT. I have bought the unlock from http://www.htc-unlocks.com/ ( Olipro ) .Everything went well for unlocking but when I restart the phone it went to dead. After HARD reboot shows as:
Security unlocked
TOPA210 32M
SPL-1.33.01 iMex
MicroP-Topaz (LED) v11
TURBO HW/TURBO SW
TPMFG DATA
512,555 190,897
191,208 833,208
833,899 calibrated
Can Someone here help ?
Thanks!
__________________
You might have to run HardSPL from here (1.83 vs 1.33)... http://forum.xda-developers.com/showthread.php?t=520312 and then rerun Olipro's Unlocker from Step 2.
I'd check with Olipro first to be sure.
Thanks for your suggestion . But my phone is a brick now and can not be synced with PC.
Can you get to tri-clolour screen?

Splash screen stuck-assistance needed

If is there anyone active on this thread, for this old bugger, please assist.
I'm on SPL, non hard, no CiD unlock no nothing
The kais 130 enter tricolor mode with no problem.
It is the mda vario iii model from tmobile with cid tmob101. I cannot find anywhhere a stock rom that works as all says invalid vendor id.
When booting i can see the t mobile logo and radio verion but it is stuck. When trying mtty boot command it says unknown command.
Trying to use sd hardspl with the kaisdiag and kaisimg file but it stucks at Loading screen and does nothing.
Any idea on what to do next?
I know its a longshot as it is an old device, but maybe some old user may help as i am trying to bring this classic back life.

Categories

Resources