Slight Problem with the flashing - 8125, K-JAM, P4300, MDA Vario Software Upgrading

I've bought myself a MDA Vario (T-mobile NL).
But i have a other provider so i treid to unlock it which failed.
So i downgraded to IPL:1.01 and SPL:1.01 using the button 1.05 rom.
And then unlocked using lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
I also unlocked the CID and i didn't see any errors in my dos prompt.
Now i am trying to upgrade again and it keeps failing, i get to the green red bleu screen but then it hangs. The phone works but i want newer software.
When i boot it says i have: IPL:1.01 and SPL:1.01.0000 GSM:1.12.10.0 and OS:1.5.4.2.
When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.
I like to upgrade to: T-Mobile 2.26 ROM or http://forum.xda-developers.com/showthread.php?t=330080, i preffer the second rom.
Can someone tell me what is wrong, is it possible the CID unlock failed and it doesn't show?

MSSH said:
I've bought myself a MDA Vario (T-mobile NL).
But i have a other provider so i treid to unlock it which failed.
So i downgraded to IPL:1.01 and SPL:1.01 using the button 1.05 rom.
And then unlocked using lokiwiz - HTC Wizard Unlocker UPDATE Version 0.2b.
I also unlocked the CID and i didn't see any errors in my dos prompt.
Now i am trying to upgrade again and it keeps failing, i get to the green red bleu screen but then it hangs. The phone works but i want newer software.
When i boot it says i have: IPL:1.01 and SPL:1.01.0000 GSM:1.12.10.0 and OS:1.5.4.2.
When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.
I like to upgrade to: T-Mobile 2.26 ROM or http://forum.xda-developers.com/showthread.php?t=330080, i preffer the second rom.
Can someone tell me what is wrong, is it possible the CID unlock failed and it doesn't show?
Click to expand...
Click to collapse
download WST TOOL from the link below and apply to check the unlock staus of your phone,if it says locked again apply the method of unlocking correctly
http://forum.xda-developers.com/showthread.php?t=329170
Error:
'When i try to run lokiwitz again to unlock my CID it says that a file is inuse and doesn't finish. The first time it didn't do this.'
I think you did not copied the Enablerapi.cab file in your phone correctly or executed it in there
good luck

Fixed it,
After reinstalling the EnableRapi.cab which got lost in some sort of way. Everything went A ok

MSSH said:
Fixed it,
After reinstalling the EnableRapi.cab which got lost in some sort of way. Everything went A ok
Click to expand...
Click to collapse
GRRRRRRRR8
Glade I was of any help,Happy flashing
Good luck

Related

t-mobile MDA wiza200 flashing to 2.17 help

I unlocked the phone a few times even.. with aWizard and the tool inside the CUSTOM_RUU_Prodigy_2170702_217_20710_TMO_US.exe file.
it never gets past 0% on the isntall, so it's good I have a working phone.. but I can't update anything.
anyone have any ideas?
have you tryied to cid unlock are you using lokiwiz to unlock or are you using awizard
yeah I tried both actually.
.
yeah I tried both actually.
.

SIM Lock on Cingular 8125

Hi All,
I unlocked my device (cingular 8125,wizard), changed cid with spv services to 11111111, updated my rom after. this worked fine, but when I restart the device it appears the sim lock window.
now I Have :
ipl 2.25
spl 2.25
gsm 02.25.11.1
I tried with lokiwiz 02/03 to get the new code but it appears a crazy code in the dos box. See please attached file. Does anybody know what is wrong ??
Can anybody help me ? I canĀ“t use my device at this time.
Thank you

CID lock proplem

hello
my device is sioped in bootloader screen its cant logon so its make sync with activesync
i think my devices is CID locked NOW CAN I MAKE cid UNLOCK FROM BOOTLOADER
please help me
thank for all
ok, i cant understand a single thing your saying....
albttar1001 said:
hello
my device is sioped in bootloader screen its cant logon so its make sync with activesync
i think my devices is CID locked NOW CAN I MAKE cid UNLOCK FROM BOOTLOADER
please help me
thank for all
Click to expand...
Click to collapse
Try flashing an official ROM. You really need to give us more information about your phone and what you did to get it "stuck".
--M
albttar1001 said:
hello
my device is sioped in bootloader screen its cant logon so its make sync with activesync
i think my devices is CID locked NOW CAN I MAKE cid UNLOCK FROM BOOTLOADER
please help me
thank for all
Click to expand...
Click to collapse
Do you have a G3 or G4 device?
Did you read the stickies on unlocking your device?
What did you do to make your device get stuck in bootloader?
What is your current IPL/SPL
Who is your carrier?
Why do you want to flash your device and do you truly need to?
If you have not personally unlocked your device then it most probably IS locked. CID lock is not the same as SIM lock.
*IF* your device is a G3 I suggest flashing the button 1.05 rom and then following the steps in the unlocking sticky. *IF* your device is a G4 reflash your carrier's latest rom and then find the G4 unlocker website link in the G4 section of this forum.
1 my device is G3
2 I do unlock 2 time
3 after I install wm6 I suggest flashing the button 1.05 rom then the device is stop in splash screen
4 now my IPL/SPL 1.01
albttar1001 said:
1 my device is G3
2 I do unlock 2 time
3 after I install wm6 I suggest flashing the button 1.05 rom then the device is stop in splash screen
4 now my IPL/SPL 1.01
Click to expand...
Click to collapse
If you went back to 1.05 from a 2.xx ROM you'll need to unlock it again. (if you have already then...) After 1.05 ROM you need to go to a 2.xx (we suggest the TMobile 2.26 production ROM). After you have done the 2.26, you can then flash a custom WM5 or Faria's WM6 ROM. You can only "upgrade" FROM a 2.xx ROM.
--M
mr demontefixo
I install 1.05 then I unlock CID then my device not logon (it stoped in splash screen)
I try install ROM 2.26 but this not repair my proplem
I think solution if i unlocker my CID from bootloader but Inot have method to do that
thanks

When i flash the new ROM - the phone boots the OLD?

I understand this - i've tried flashing two different WM6 ROMs to my device - and everything works well - goes to 100% and says it's succsessful. But then my device boots - the old image/OS? Appearantly it just does a hard reset?
What's up with that?
GeeZuZz said:
I understand this - i've tried flashing two different WM6 ROMs to my device - and everything works well - goes to 100% and says it's succsessful. But then my device boots - the old image/OS? Appearantly it just does a hard reset?
What's up with that?
Click to expand...
Click to collapse
CID UNLOCK YOUR DEVICE....or better yet start reading the wizard upgrading forum..... http://forum.xda-developers.com/showthread.php?p=1184453#post1184453
I thought a locked CID would prevent to flash at all? (error before flashing started). I did unlock CID first - but there was one error, but i think that was when writing the backup. I'll try it again.
Edit: Here is the error:
CopyFileToTFFS(cidunlocked.bin:0, 0, 00010000)
ERROR: ITWriteDisk - An internal error occurred.
result=80072745
Your phone is now CID unlocked....
Click to expand...
Click to collapse
If your phone retains the same OS after you flash then quite obviously something went wrong during the cid unlock and it wasnt cid unlocked at the time of flashing.
This is mentioned many times, let me know if your having trouble finding info.
The error you posted means the CID Unlock didn't work (even though you got a message saying you are now CID Unlocked). Go back to the thread on CID Unlocking (or maybe its the lokiwiz thread) and read about the errors.
Another thing is you haven't told us if you have a G3 or G4 device and what your current IPL / SPL are. that info helps so you don't get taken in the wrong direction.
I got it working now. IPL/SPL was 2.x, so i had to downgrade in order to get it working. I got tricked, since i couldn't find anywhere mentioning what happened if CID was locked - only that it wouldn't work to flash if it's not unlocked - and i assumed that by "wouldn't work" they meant that it couldn't get it flashed - but it was flashed without any errors so i assumed that CID lock was not the problem (it did says succsessfull when i unlocked cid also).

Sanity Check - Still CID Unlocked?

So I've upgrade my old 8125 successfully - got a new one due to a second USB port coming off main board. This new one is a slightly newer model - T2. Anywho - Was running Lokiwiz to CID and SIM unlock. Successfulyl Sim unlocked - also THOUGHT i successfully CID unlocked it (based on the progress of the program - all the way through auto hard reset),
but apparantly I didn't (as confirmed by the MTTY tool telling me I don't have sufficient privelages to create image of rom and an invalid Vendor ID error upon tmobile rom RUU). Also i get the familiar "fat format failure" message at the option screen when hard resetting.
So i can flash the heck out of the device with old and new Cingular roms as well as the TouchFlo and Touch Diamond roms but the only thing that changes after successful flashing is the splash screen and depending on the ROM the IPL/SPL number. The device remains frozen and hangs on the Boot Loader screen.
So in attempt to get this thing up and running i need a sanity check.
Mmy first question is
1) Based on info above would you agree the device is still CID unlocked?
2) Is there (cuz I can't find one) a utility besided IMEI unlock to get into the phone and CID unlock it through the RBG boot loader screen?
3) Since I UNSUCCESSFULLY CID unlocked the device using Lokiwiz in the first place - I still have the output file from Lokiwiz - is there a way that the IMEIUNLOCK progrogram from IMEI UK can read this binary file and unlock the device or do i just need to pony up the 40bucks and CID unlock this.
I can't think of another way to get back to a functioning device.
Additional Thoughts
I also had a thought - which is probably an impossibility - but is there any way if I get the IMEI unlock code from Cingular to somehow get it into the IMEI Unlock software or use some other program like MTTY to insert that code into the phone?
DAMN! - I still don't know how the CID unlock didn't go through the first time. -Maye it was because the rom didn't roll back.
BRoke Down
and purchased IMEI unlock - unlocked just fine. Now I was able to upgrade to the Tmobile rom- INstallation went through without a hitch- now I am stuck on the Tmobile Boot loader- WTF can't I get past the boot loader on any rom I use? This makes no sense. Anyone have any thoughts? IPl and SPL at this point both show 2.26. THis is really pissing me off.
Try using the SD method to create a OS ROM dump and restore it. Some people works with it.

Categories

Resources